Customise the My Setup Page

Hi Guys,
Does anyone know if we can customise the My Setup Page.
We have created a new field, that we can see via the admin-user management page. But i want users to see this on their My Setup Page.
Any ideas??
Regards
Minesh

I am guessing you are specifically talking about the my profile page through my setup. We had the similar issue and have heard that this is a product enhacement. Will be available in the future

Similar Messages

Was trying to install windows 8.1 but didn't install bootcamp first. Am in a loop. Keep coming back to the windows setup page. What to do?

Was trying to install windows 8.1 but didn't install bootcamp first. Am in a loop. Keep coming back to the windows setup page. What to do?

Please reset NVRAM - Startup key combinations for Intel-based Macs - Apple Support and OS X Mavericks: Reset your computer’s PRAM. You have Bootcamp settings in the nvram that are causing problems.

I have the WRT300N. When I go to the basic setup page an...

I have the WRT300N. When I go to the basic setup page and click on DHCP, none of the devices connected to the router show up. When I first set up the router they did. Does anyone know why I can't see them anymore?

Click refersh & see if all devices are there or not ...
Also you can check if all computers or devices areturned on or not ....

Customise the InfoView Logon Page in XIR2

Post Author: nagh
CA Forum: Publishing
Hello, I would like to 'Customise the InfoView Logon Page' in BO XIR2Can any one suggest me how to and where to customise Logon page. Thanks, Nagh

Post Author: amr_foci
CA Forum: Publishing
its so easy you can customize it by editing the logon.jsp file which reside in
$TOMCAT/webapps/businessobjects/enterprise115/desktoplaunch/InfoView/logon/logon.jsp
edit this jsp,, but take care of the business objects code there
good luck
Amr

Cant connect to the WRE54G setup page.

Title says it all!
I can't seem to connect to the setup page, the request keeps timing out.
The router is a WRT54G V2.2
The expander seems to work, it can find the Wireless network if I remove the WPA2 security encryption. That's not something I want to do since I dont want any filthy pirates on my network!
I tried plugging it directly into the router, the computer. Unsure about my IP address though. It should be fine since my gateway seems to be 192.168.1.1
I appreciate any help.

First of all connect the WRE54G with the Router through the Cable and then connect a Computer with the Router through a cable again.
Then try opening up the setup page of the WRE54G with the Default IP address 192.168.1.240 if that doesn't work then reset the WRE54G and power cycle.. As the lights gets stable then try to open the setup page again with the Default IP address 192.168.1.240 and try updating the firmware as well by downloading it from the Cisco website...
Secondly the highest Security Mode that can be set is - WPA Pre-shared Key..

Trying to download the latest Firefox on Windows 7 laptop but the Firefox setup page says it's downloading for 1hour now and shows no signs of finishing.

My laptop is protected with the AVG AntiVirus free package. The Windows Firewall is on.

''jayelbe [[#answer-665542|said]]''
<blockquote>
Hi Martin,
Sorry to hear Firefox isn't downloading.
I'd like to try a different download link with you. Could you follow this instructions and let us know whether they work?
# Go to: https://ftp.mozilla.org/pub/mozilla.org/firefox/releases/latest/win32/
# Click the relevant link for your locale/language. (British English is en-GB, US English is en-US, etc)
# Click ''Firefox Setup 34.0.5.exe''. This is quite a large file, so might take a few minutes to download. Once it's downloaded, run the file and it should install Firefox.
To explain: the ''Firefox Setup 34.0.5.exe'' file will contain everything you need to install Firefox. ''Firefox Setup Stub 34.0.5.exe'' is the normal installer - it doesn't include all of the Firefox files, but instead will download them after you start the installation. Hopefully if we download the full Firefox installer, it will work.
Cheers,
Jayelbe
</blockquote>
Hi Jayelbe
Thanks for the suggested solution. Yes it has worked!
Martin

Jabber doesn't show up as an option on the account setup page

Hey I've tried to add Facebook account on my ichat and when I tried to select the Jabber Account type, it wasn't there the only option that were available were AIM, Mobile Me, and Mac.com. It;s also weird because on top of the window, it saids that it supports Jabber and Google Talk as well. Here's a link with my screenshot (Hopefully it works).Thanks

Hi,
If you have Parental Controls turned On for the Mac User Account you are logged on to your Mac with then Jabber (And Bonjour) chats will not work.
I would also read this first
http://www.facebook.com/help/?faq=14820
3:18 PM Sunday; April 4, 2010
Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"

Question about the setup page for WRT54G2

I haven't really tinkered much on my router since I had a friend installed mine a couple years back but I did remember him saying to check for updates on it's firmware once in a while. I did just that but I came at a rather confusing point in my update... namely I found that you can acceess the page by typing in 192.168.1.1 in thhe browser but before I found that I ran into this site first:
http://ui.linksys.com/files/BEFW11S4/v4/1.50.14/Administration.htm
I was somewhat confused as my settings werent being saved when I worked on the webpage mentioned above, so can anyone tell me if that site is part of the linksys setup page ?

that site is just a demonstration of what the Linksys router's administration page looks like. it's basically for instructional purposes only. anything you do on that page WILL NOT affect your router settings.
on the other hand, accessing http://192.168.1.1 will allow you to change your router's settings.

Customising the pages of BI4 launchpad

Dear experts,
Do you have any idea of customising the existing JSP pages and reflect to the BI4 Launch Pad? for example, I add a new link to this jsp file:
C:\Program Files (x86)\SAP BusinessObjects\Tomcat6\webapps\BOE\WEB-INF\eclipse\plugins\webpath.InfoView\web\jsp\listing\main.jsp
But still no change in the head of the Launchpad. Thanks a lot.
Best regards,
Davy

Dear Davy and Sonia,
I am faily new to customising web files. Can you please suggest what exact changes needs to be made in the custom.jsp file? I did a quick test by typing my name in the <Title> /<Title>. Tried the same in the <Head> section but saw no changes when I opened my BI Launch Pad. I did restart Tomcat after the changes too. Any suggestions might be very helpful. We would like to do changes like Logo, Environment Names, Changing the BOBJ Blue Color ribbon in the top to a different color for each env, etc....
Thanks
Ramki

[cs4.0]cant proceed the setup page...stuck at the checking profile system 90%(when the cheking reach 90%, pop up the setup page then gone le, cant install)...help pls

im using vista home premium sp2...previously i run the installer that which copy from my friend,but the file did not complete copy....so i recopy again the installer file and run again.the problem occur(checking system profile reach till 90% then pop up the loading setup page and gone suddenly,therefore cant install it)
any solution...pls help pls....T.T

You must to view the section: http://www.oracle.com/technology/software/tech/windows/odpnet/install10202.html... there you will find all the information that you need for the installation in windows vista. I could to install the ODAC and i have not any problem.

WRT54G Wireless Setup page won't load and other issues.

Well I have had quite the mess the last 24 hours. I'll start from the beginning and attempt to spell out the issues I am having. I have had this router for 4 years or so and have never had a problem.
I recently purchased a PS3 and started using the wireless feature that it offeres. Well I was having problems staying connected and was running in to IP address conflicts with my laptop. So I thought I would cure that by moving the router to the ps3 and using a wired connection for its internet. So that is what I did and that is when the problems started snowballing!! After I got the router moved and everything set up, all seemed well at first.
Shortly thereafter I realized I was still getting IP conflicts. So i did some research and saw where I could dedicate an address for the ps3 and also change some of the wireless settings on the router homepage. I previously had never password protected my network. I'm in a rural area and there aren't many people around that would be trying to get on it. But I figured since I was there I would rename the network and password protect it and all of that. Well that didn't help either. I was still having problems.
I then did all of the resets. Online, on the unit and also a power cycle. So I was back to square one with the settings at this point. So today I noticed that my connection would go from its norm of 54mbps down to1 and then lose connection. I did the resets and restarts and all of that, to no avail. Then it got to the point where it wouldn't connect at all. I checked the actual connection by connecting my computer directly to the modem and it worked flawlessly. So I know it is a router problem. I also tried using 2 seperate laptops and they both responded the same.
I think part of the issue I had then was that the modem and router were on my entertainment center and weren't very high and were in a shelf. Also, my surround sound receiver does use a wireless connection to 2 of its speakers. I didn't know the proper placement of a router until I had this problem. Now that it is back in its previous location the connection seems to be normal, although once in the last hour I did drop down to 1mbps and have to disconnect and reconnect. But it hasn't happened again so far.
However, I am unable to access the wireless page on the router setup page. I did yesterday but it won't load today. On either computer. So I am unable to change the name of my network or assign a password or change any other wireless setting. And again, I've tried every reset method and it still don't work.
Also, does anyone have any advice on the conflicting IP addresses with the ps3? They sent me an email stating that it may be a port or firewall issue? After doing some online research it seems this particualr router has had a lot of problems getting along with the ps3.
I hope I haven't put in too much information but I was just trying to make sure I had any questions I could think of answered ahead of time. I've tried about every avenue I could already. I tried the chat help and was told I didn't qualify and was sent to the phone assistance who after a half hour realized I didn't qualify for that help either. So, here I am!!! Thanks ahead of time!

Make sure that there is no static IP address on any of your computer. You can assign a static IP address on Play station.
Connect the computer to the router with the Ethernet cable.
Download t he latest firmware from Linksys website and save it on your computer.
Open the setup page of the router. Go to Administration tab and click on Firmware upgrade sub tab. Browse the firmware file that you have already downloaded and upgrade it on your router.
After upgrading the firmware on your router, it is recommended that you should reset the router and reconfigure it. Press and hold the reset button on the router for 30 seconds. Release the reset button and wait for 30 seconds. Power cycle the router and reconfigure it.
Change the MTU size on the router to 1365.
Go to Wireless tab and change the wireless network name and channel to 11. Also change the wireless security settings.

WRT54G V8 Can't connect to web based setup page?

Earlier I reset my router and was able to use 192.168.1.1 to visit the web based setup page while trying to re-establish a home network now that I have a new computer using Windows 7 which can not use the easylink advisor. I was able to get on the page to update my SSID and WEP key. But when my wireless devices were still having problems connecting to the internet I tried to go back to the page and found that I can't get it to connect, though my desktop is able to connect to other internet sites just fine.
Does anyone know what i can be doing wrong? I am using Verizon DSL. I was able to ping the router and all tests showed that it was connected fine, yet I still cannot get on the setup page and my laptop still can't connect to the network. I have tried resetting the router again, and still nothing. And yes, I have gone through numerous power cycles. I also tried going though the network map on my computer, but the computer says it was unable to create a map for it even though at the time I had it listed as a Home network.
Message Edited by TaiShan on 01-03-2010 07:06 PM
Solved!
Go to Solution.

Wireless connections to 192.168.1.1 often fail. When accessing the router setup pages, always use a computer that is wired to the WRT54G.
If the above does not solve your problem, then here are my other tips for viewing the router setup pages:
You do not need an Internet connection. The router's "web pages" are built into the router.
Use Internet Explorer, it usually works.
JavaScript must be enabled.
Use a computer that is wired to the router.
In the non-working computer, temporarily turn off your software firewall.
Point your browser to 192.168.1.1 , then login to your router. Your user name should be left blank. Your password is "admin" (with no quotes), unless you changed it.
If you are using Zone Alarm, right click on the ZA icon in the system tray (lower right corner of screen) and then click "Shutdown ZoneAlarm", and see if this fixes your problem. If this does not work, try the following with Zone Alarm: Open the ZAISS control center, go to Privacy, then temporarily turn off Ad Blocking and Cookie Control, and see if that fixes your problem.
Some Zone Alarm users have reported that adding 192.168.1.1 to their list of "trusted" addresses fixed the problem. This trick might also work with other firewalls.
If you are using Noton Internet Security with the Add-on Pack, be sure to turn off the Pop-up Blocker, and the Ad blocker. Some users have reported that they needed to uninstall the entire Norton Add-on Pack.
If you cannot get anything at 192.168.1.1 then perhaps this is not your router's address. Go to "Start" > All Programs > Accessories > Command Prompt.
A black DOS box will appear. Type in "ipconfig" (with no quotes), then hit the Enter key. Look at the "Default Gateway". Is it 192.168.1.1 ? Point your browser to the "Default Gateway", then login to your router.
If the above fails, disconnect your modem from the router, and try again. If this corrects your problem, then most likely you have a "modem-router" rather than an ordinary modem. Report back with this problem, and also state the make and exact model number of your modem (not the router).
If all of the above fails, power down your entire system, unplug it from the wall, wait one minute, then power up and try again.
If all of the above tips fail, then reset the router to factory defaults: Power down the router and disconnect all wires from it. Wait one minute. Power up the router, allow it to fully boot (1-2 minutes), then press and hold the reset button for 30 seconds, then release the button and allow the router to reset and reboot ( 2-3 minutes). Power down router. Wait one minute. Connect one computer, by wire, to a LAN port on the router. Boot up system. The router should work, but you will need to setup your router again from scratch. If you saved a router configuration file, DO NOT use it.
If you still have trouble, then you need to download and install (or re-install) the latest firmware for your router. After the firmware upgrade, you must reset the router to factory defaults, then setup the router again from scratch. If you saved a router configuration file, DO NOT use it.
Message Edited by toomanydonuts on 01-03-2010 10:54 PM

Can't Access Router's Web-Based Setup Page

I have tried this: http://linksys.custhelp.com/cgi-bin/linksys.cfg/php/enduser/std_adp.php?p_faqid=3676
Entering in the default IP and my actual IP address does not work, I'm trying to find out what my security key is.
Solved!
Go to Solution.

When you Hardwired your computer to the Router, on your computer click on Start - Run - CMD and click ok, now in the Command Prompt window type "ipconfig" and hit enter.. Note down the Default Gateway IP address.
Open IE on your Computer and in the address bar type http://default gateway ip and hit enter,when prompted for the Username and Password, Leave the Username blank and type "admin" as a password and click Ok. (If you have changed the Router password, then you need to use that password to login to the Setup page of your Router).
Once you login to the Router setup page, click on the Wireless tab and then click on the sub tab "Wireless Security" and in the window you will find out your security key.

WRT54GS v6 Bad Display of Setup Page on Browser

When I access the router setup page on my browser via 192.168.1.1, I get an improperly displayed page. No menu items are readable at the top. I only see clearly a limited amount of data with the IP address, configuration choice, etc. This makes the page unusable for making any changes. This is true using both Firefox and Internet Explorer. Has anyone else seen this problem?

You should use IE and lower your browser settings, delete cookies and cache... you can try a different computer on the network also... Some problems with zonealarm were reported here also a few days ago, you should always make sure all traffic from the router be allowed... since this is the 2nd router already it would be a longshot to think that it is a router problem... ayt?!
Message Edited by JOHNDOE_06 on 08-15-2006 09:52 PM
"Sometimes your knight in shining armor is just a retard in tin foil.."-ARCHANGEL_06

WRT54GS router setup page won't display most text

So I bought a new Linksys WRT54GS v6 wireless router yesterday, and I was able to set it up to share my DSL line, but when I went to the router setup page (192.168.1.1), it wouldn't display most text. It displays text in the entry boxes, but there are no links or other text on the page. I took a screenshot which can be seen here: http://img87.imageshack.us/img87/3390/routersetuppagemc1.jpg
Does anyone know what I can do to solve this issue?

Hey Merugo. I was having the same problem with the router settings screen refusing to load for my WRT54G. Do you happen to have v.5 of the router? After digging around in the help files on the site, I found this for firmware recovery for the WRT54G v.5 and it fixed the problem I was having once it loaded the updated .bin. Blank screen be gone.
http://linksys.custhelp.com/cgi-bin/linksys.cfg/php/enduser/std_adp.php?p_faqid=3176
(The first time the router tried to load the new .bin it timed out. And the second time it installed correctly though it didn't display "Upgrade Success" like it's apparently supposed to.)
Hope this can maybe help you since it fixed things for me.Message Edited by Res on 10-03-200606:44 PM

Customise the My Setup Page

Similar Messages

Maybe you are looking for