Customization for register id 000 missing in table Registrations

Hi all,
when iam creating (factory sales)excise invoice in j1iin from billing document the error comes as:
Customization for register id 000 missing in table Registrations
Message no. 8I303
Diagnosis
The customization details have not been maintained for this company
Procedure
Please use the localization IMG or Global settings
to maintain the company settings
Please help me out.....
Thanks
Parin

Hi Parin,
Please follow the menu path as below and maintain the settings for the plant of your company code:
SPRO, Logistics - General, Tax on Goods Movements, India, Basic Settings, Maintain Excise Groups
Hope this solves your problem.
Regards,
Sreekanth....

Similar Messages

  • PLZ Customization for Customer 300000 missing in table CIN customer master

    PLZ ARGNT
    Customization for Customer 300000 missing in table CIN customer master
    Message no. 8I303
    Diagnosis
    The customization details have not been maintained for this company
    Procedure
    Please use the localization IMG or Global settings
    to maintain the company settings

    Dear Murli
    There is no customization for Customer Master, just J1ID Customer Master CIN
    details is maintained
    Regards
    Jitesh

  • Customization for S100 j_1iindcus missing in table

    Dear All,
    When iam posting a transcation in FB60,iam getting an error and is as follows
    Customization for S100 j_1iindcus missing in table
    Message no. 8I303
    Diagnosis
    The customization details have not been maintained for this company
    Procedure
    Please use the localization IMG or Global settings
    to maintain the company settings
    Manu

    Hi,
    Go to SM30. Enter the Table Name j_1iindcus and click on Maintain. Please enter the setting for the company code S100.
    Enter Document Type, First Month and all necessary required parameters as per your requirement.
    Alternative way to go for customization is
    IMG > Logistics - General > Tax on Goods Movements > India > Basic Settings > Maintain Company Code Settings
    Regards,
    Jigar

  • Customization for 5000 j_1iindcus missing in table

    hi experts,
      Iam getting the following error when doing invoicing. The error is as follows:
    Customization for 5000 j_1iindcus missing in table ( 5000 is company code here)
    Message no. 8I303
    Thnks in advance
    waseem

    Hi,
    The error is comming from program FV64A352.
    It has following code:
        SELECT SINGLE * FROM j_1iindcus WHERE j_1ibukrs = komk-bukrs.
        IF sy-subrc NE 0.
          MESSAGE e303(8i) WITH komk-bukrs 'j_1iindcus' ' '.
        ENDIF.
      ENDIF.
    Kindly put a break point and check what exactly is going wrong.
    Regards,
    Pranaya

  • No Customization for Customer 2002missing in table CIN customer master

    HI,
    When Iam saving the excise invoice the error is  coming like..
    "No Customization for Customer 1004 missing in table CIN customer master".
    How i can do?
    regards,
    vas.v.s

    Hi Vas,
               Please check the Customer master record in Sales Area data at Billing Documents Tab ,Tax liable or not liable.
             and also check the Taxes in IMG --> Sales and distribution --> Basic Functions --> Taxes.
    Regards,
    Murali.

  • Entry missing in table TMC6 for unit KOEIN

    Hi,
    The STD Info structure S071 us marked for VA (Sales Order), it does not allows to change as it is SAP STD. I have a scenarios where these tables to be updated for VB (Contract). So i thought of creating a new table copying the existing S071, while i try to Update Rules for the new Info structure, i am getting the below copied error.
    I went through some of the links, but those are not giving the right answer. All comments are welcome...thanks
    Entry missing in table TMC6 for unit KOEIN:
    Message no. M2108
    Diagnosis
    The system attempts to determine the unit of the source field for field
    KAWRT. The data element KOEIN was defined as part of this process.
    The system now searches table TMC6 for this data element in order to
    define the two-character units ID. However, no appropriate entry could
    be found.

    Hi,
    It says -
    Solution
    This is corrected in the Support Package for Release 4.70, 5.00, 6.00, 6.02 and 6.03.
    We are running on 6.00 , how ever i will go through the Correction Instruction... thanks

  • Error _ Receiver missing for distribution rule 000

    Hello,
    When I do the settlement, I got the error message, " Receiver missing for distribution rule 000 ",
    How can I solve that ? Where I can check distributin rule ?
    thanks and regards
    Shubin

    Hi,
      Goto Settlement Profile check you have maintained the valid receiver "settlement optional" for the receiver you mentioned in the settlement rule.
    If that settings are in place. then goto IMG>PS>Costs>Automatic and periodic allocations>Settlement>Define settlement rule for network>Assign strategies and default rule for network types.
    in that check out whether you can mentioned default rule as '00' for the network types you are using, if yes change the same to 'PS1'.
    Rgds
    Sudhir Reddy

  • Posting thro J1IEX error -  DEBIT ENTRY missing in table J_1ITRNACC

    Hello,
    While posting Cenvat Credit in J1IEX, the system is giving error as "Customization for DEBIT ENTRY missing in table J_1ITRNACC".
    - "The customization details have not been maintained for this company".
    When checked thro' SPRO>IMG>Logistics-General>Tax on goods movement>India>Account determination>Specify excise accounts per excise transaction', it shows all debit, credit entries for excise transaction type 'GRPO'.
    Kindly suggest me what else need to be checked? Part I entry is already done during MIGO.
    Thanking in advance.
    Regards
    Ratna

    Dear Velu & Pankaj Singh,
    Thanks for your prompt reply.
    We already had setting for the following.
    GRPO CR Credit CLEAR CENVAT clearing account
    GRPO DR Debit ONHOLD CENVAT on hold account
    GRPO DR Debit RG23AED RG 23 AED account
    GRPO DR Debit RG23AT1 RG 23 AT1 Account
    GRPO DR Debit RG23BED RG 23 BED account
    GRPO DR Debit RG23ECS RG 23 ECS Account
    The above is also maintained for sub trn type 'IP'
    But we do not have any entry for SED account i.e. record does not exist for GRPO DR Debit RG23SED RG 23 SED Account.
    The excise entries contains BED account, AED account, ECS account and AT1 account as SHE CEss account.
    Pl. suggest.
    Regards
    Ratna

  • Very urgent Enhancement category for include or subtype missing

    HI all;
    I am currently on BI 7.0 release
    I have a cube A that activated in Development. I transported cube A to Staging get the following error
    Enhancement category for include or subtype missing
    Enhancement category for include or subtype missing    
    No active nametab exists for /BIC/DZIP_INT9            
    Termination due to inconsistencies                     
    Table (Statements could not be generated)
    Flag: 'Incorrect enhancement category' could not be upda
    Enhancement category for table missing                 
    Enhancement category for include or subtype missing    
    No active nametab exists for /BIC/DZIP_INTP    
    and the cube couldn't activate in staging.
    I re-transport this cube A a few times with difference option of grouping and still no luck.
    in Development, i copied cube A to cube Aa, then transport new cube Aa to staging, then everything went ok. the new cube Aa is activated in staging area.
    I couldn't use the new name Aa since all the queries using the A name.
    Is there any possible solution that could help?
    Thanks.
    Rainnie

    jj

  • Fields for access Z001 10 missing (Pricing Sales/Distribution)

    Hi Gurus,
    I tried creating access sequence and condition table for a condition type.  but i get this error when creating the error. 
    Fields for access Z001 10 missing (Pricing Sales/Distribution)
    Thanks,
    Paul

    Hi,
    step1: tcode: v/07
    step2: select access seq Z001
    step3: click access (left side)
    in this how many access you have created and on which you have saved your condition record.
    step4; select access
    step5: click fields (left side)
    over here how many field are visible to you can you tell us that.
    Where you are getting error can you specify that also.
    While creating sales order or while creating condition record.
    Regards
    Raj.

  • Error while saving SO - item 000010 is missing in table YVBAP

    Hello Experts,
    We are facing following issue while delivering an order with BOM material.
    1)     We created an order with sold-to customer blocked for delivery.
    2)     Then we removed the block from customer and also from document header/shipping tab.
    3)     Now when we tried to save the order it showed us an error-u2018item 000010 is missing in table YVBAPu2019
    We are not able to find the root cause of the issue. Could anyone please help us in this error?

    Hello,
    Please check whether delivery block is also removed under sales Tab of item overview. Also check at line item level, whether delivery block is removed for BOM items. Once this done, save the sales order again and try to create delivery.
    Br,
    Tushar

  • Entry 001 is missing in table tab_fskb

    Hi , I get a problem when I use t-code:fb70,   the error message is "entry 001 is missing in table tab_fskb"    ,       is tab_fskb a table ?  I use se16 to view the table ,but there is no table named tab_fskb.      who can give me some solution?
      thanks a lot

    Dear Victor,
    Once you open a particular thread, after that why you don't follow it..?
    Forget about awarding points to a helpful suggestion or closing a thread,you don't even reply when anybody starts showing interest in your question.
    Yesterday you asked:
    What should I pay attention to do a successful client copy ?   
    I do the remote client copy successfully , I see the message"remote client copy complete" in SCC3. but the developers say they can not do the post.
    so , I want to have your advices about how to do a successful copy. what should I pay attention to.
    And when I asked for certain information:
    Please specify the following things to help us analyze your situation.
    1. Your system landscape
    2. Your source and target system while doing the remote client copy.
    3. Also why you did client copy and more details about the problem that your developer is facing.
    Then only we can guide you.
    You didnt replied and again opening a new thread today
    PS: What you expect from others..?..To share knowledge when you dont even follow your post and least bothered about answering certain doubt of various potential repliers.
    Regards,
    Ashutosh

  • FAGLF101-Account determination for transaction V02 is missing for account

    Morning
    When I run the "faglf101" transaction, i get this error : 
    "Account determination for transaction V02 is missing for account 0000401142
    Y1 PCG                                                                     
    Message no. FR005       "
    I have tried to customize the adjustments accounts and postings keys in the IMG
    "Financial accounting > Accounts Receivable and payable >
    Business Transactions > Closing >Regrouping > Define adjustments
    accounts for changes reconciliation accounts".,  but i don't see the part "Regrouping" in the IMG.
    I have tried to use the OBBW transaction, but his transaction code "A00-Transfer postings: changed recon. acct" don't correspond to mine (V02);
    We are in ECC6.
    Can somebody explain to me how can i correct this error please?
    Best regards

    This is meant for account determination for Receivables/payables sorting. Check your configuration in SPRO->General Ledger Accounting (New)->Periodic Processing->Reclassify->Transfer and Sort Receivables and Payables->Define Adjustment Accounts for Receivables/Payables by Maturity

  • How do you change/adjust border width for all the cells in a table created in Pages?

    How do you change/adjust border width for all the cells in a table created in Pages?
    Note- I am trying to figure out how to create and format tables in the latest version of the Pages app on an iPad air (iOS 8.1.1.1) . Creating tables, adding or removing borders for individual/all cells in a table seems straight forward. However the default border style seems to be a heavy black line. How do I change this?
    I found the option add or remove borders for all/ individual cells in a table, however I can't find any option within style/format dialogue screens for changing colour or line thickness for table cells. Likewise I can't find any clear instructions on how to do this in apple help pages or support website
    Btw- I'm assuming  it is possible to customize/adjust the colour & thickness of selected lines in a table created in this app (it's fairly easy to do this word processing apps like MS Word) please let me  know if this is not actually possible in Pages

    They know perfectly well what they took out of Pages '09.
    Well over 90 features.
    Do you think you posting feedback is going to remind them of what they did?
    http://www.freeforum101.com/iworktipsntrick/viewforum.php?f=22&sid=3527487677f0c 6fa05b6297cd00f8eb9&mforum=iworktipsntrick
    Pages '09 should still be in your Applications/iWork folder.
    Archive/trash Pages 5 and rate/review it in the App Store, then get back to work.
    Peter

  • Schedule line is missing in table YVBEP

    Hi All,
    We added a new custom field in schedule line tab. For which we added code in PAI and user exit MV45AFZZ. When we are adding a schedule line we are getting the following error message:
    Schedule line 000010 0004 is missing in table YVBEP
    Message no. V1506
    The schedule line 0004 for the item# 000010 is having only 'confirmed qty' and 'rounded qty and order quantity' are both 0's. This schedule line was generated as there was no stock for the schedule line entered by user .
    Please let me know what has to be done to resolve this issue.
    Thanks,
    Karuna.

    Hi
    See SAP Note 178328 - Problems due to incorrect user exits in SD.
    This note says:
    The Y tables play a role only for the change mode of document
    processing. They contain the original status of those table entries
    that have been changed during the current transaction. Therefore,
    the entries in the Y table reflect the previous status of the
    document in the database.
    and
    You add a table entry. There is only one entry in the X table
    that has the update indicator I. There is no entry in the Y
    table.
    so, check in XVBEP that the field UPDKZ has the value 'I'.
    Read carefully this note
    Regards
    Eduardo

Maybe you are looking for