Customization for S100 j_1iindcus missing in table

Dear All,
When iam posting a transcation in FB60,iam getting an error and is as follows
Customization for S100 j_1iindcus missing in table
Message no. 8I303
Diagnosis
The customization details have not been maintained for this company
Procedure
Please use the localization IMG or Global settings
to maintain the company settings
Manu

Hi,
Go to SM30. Enter the Table Name j_1iindcus and click on Maintain. Please enter the setting for the company code S100.
Enter Document Type, First Month and all necessary required parameters as per your requirement.
Alternative way to go for customization is
IMG > Logistics - General > Tax on Goods Movements > India > Basic Settings > Maintain Company Code Settings
Regards,
Jigar

Similar Messages

Customization for 5000 j_1iindcus missing in table

hi experts,
Iam getting the following error when doing invoicing. The error is as follows:
Customization for 5000 j_1iindcus missing in table ( 5000 is company code here)
Message no. 8I303
Thnks in advance
waseem

Hi,
The error is comming from program FV64A352.
It has following code:
    SELECT SINGLE * FROM j_1iindcus WHERE j_1ibukrs = komk-bukrs.
    IF sy-subrc NE 0.
      MESSAGE e303(8i) WITH komk-bukrs 'j_1iindcus' ' '.
    ENDIF.
ENDIF.
Kindly put a break point and check what exactly is going wrong.
Regards,
Pranaya

PLZ Customization for Customer 300000 missing in table CIN customer master

PLZ ARGNT
Customization for Customer 300000 missing in table CIN customer master
Message no. 8I303
Diagnosis
The customization details have not been maintained for this company
Procedure
Please use the localization IMG or Global settings
to maintain the company settings

Dear Murli
There is no customization for Customer Master, just J1ID Customer Master CIN
details is maintained
Regards
Jitesh

Entry for condition type missing in table PRCC_COND_CT

Hi guys,
I got this error message in my BDoc.
It ask me to
"Fill the table PRCC_COND_CT bu using a Customizing download, and then restart the rolled back block in the inbound queue."
I am not too sure what is a customizing download.
Can you guys help me out?
Cheers
Lawrence

Hi,
Firstly please apply the note 1003793 and then run the customizing load again and check for errors.
then if you get any errors like
"It is not possible to change client-independent Customizing objects Message no. CND_MAP204 "
Then log into SCC4 transaction and then make the following change
"changes to repository and cross-client customizing allowed" under Cross-Client Object Changes.
Thanks,
Abishek

No Customization for Customer 2002missing in table CIN customer master

HI,
When Iam saving the excise invoice the error is coming like..
"No Customization for Customer 1004 missing in table CIN customer master".
How i can do?
regards,
vas.v.s

Hi Vas,
Please check the Customer master record in Sales Area data at Billing Documents Tab ,Tax liable or not liable.
and also check the Taxes in IMG --> Sales and distribution --> Basic Functions --> Taxes.
Regards,
Murali.

Posting thro J1IEX error - DEBIT ENTRY missing in table J_1ITRNACC

Hello,
While posting Cenvat Credit in J1IEX, the system is giving error as "Customization for DEBIT ENTRY missing in table J_1ITRNACC".
- "The customization details have not been maintained for this company".
When checked thro' SPRO>IMG>Logistics-General>Tax on goods movement>India>Account determination>Specify excise accounts per excise transaction', it shows all debit, credit entries for excise transaction type 'GRPO'.
Kindly suggest me what else need to be checked? Part I entry is already done during MIGO.
Thanking in advance.
Regards
Ratna

Dear Velu & Pankaj Singh,
Thanks for your prompt reply.
We already had setting for the following.
GRPO CR Credit CLEAR CENVAT clearing account
GRPO DR Debit ONHOLD CENVAT on hold account
GRPO DR Debit RG23AED RG 23 AED account
GRPO DR Debit RG23AT1 RG 23 AT1 Account
GRPO DR Debit RG23BED RG 23 BED account
GRPO DR Debit RG23ECS RG 23 ECS Account
The above is also maintained for sub trn type 'IP'
But we do not have any entry for SED account i.e. record does not exist for GRPO DR Debit RG23SED RG 23 SED Account.
The excise entries contains BED account, AED account, ECS account and AT1 account as SHE CEss account.
Pl. suggest.
Regards
Ratna

Customization for register id 000 missing in table Registrations

Hi all,
when iam creating (factory sales)excise invoice in j1iin from billing document the error comes as:
Customization for register id 000 missing in table Registrations
Message no. 8I303
Diagnosis
The customization details have not been maintained for this company
Procedure
Please use the localization IMG or Global settings
to maintain the company settings
Please help me out.....
Thanks
Parin

Hi Parin,
Please follow the menu path as below and maintain the settings for the plant of your company code:
SPRO, Logistics - General, Tax on Goods Movements, India, Basic Settings, Maintain Excise Groups
Hope this solves your problem.
Regards,
Sreekanth....

[svn] 3403: Fix for SDK-17097 - Missing summary description of a class in package classes table

Revision: 3403
Author: [email protected]
Date: 2008-09-29 12:36:37 -0700 (Mon, 29 Sep 2008)
Log Message:
Fix for SDK-17097 - Missing summary description of a class in package classes table
QA: Yes
Doc:
Tests: checkintests
Ticket Links:
http://bugs.adobe.com/jira/browse/SDK-17097
Modified Paths:
flex/sdk/trunk/asdoc/templates/class-files.xslt

Well, it's kind of logical that as you put more jar files (classes) in Tomcat, it changes the error to ask for the classes (inside a jar) it cannot find.
There was a good class->jar finder on the internet some years ago, but i don't remember the address. Try looking for that and search all the missing classes (NotDefined) and their correspondig jar files.
Good Luck!

Entry missing in table TMC6 for unit KOEIN

Hi,
The STD Info structure S071 us marked for VA (Sales Order), it does not allows to change as it is SAP STD. I have a scenarios where these tables to be updated for VB (Contract). So i thought of creating a new table copying the existing S071, while i try to Update Rules for the new Info structure, i am getting the below copied error.
I went through some of the links, but those are not giving the right answer. All comments are welcome...thanks
Entry missing in table TMC6 for unit KOEIN:
Message no. M2108
Diagnosis
The system attempts to determine the unit of the source field for field
KAWRT. The data element KOEIN was defined as part of this process.
The system now searches table TMC6 for this data element in order to
define the two-character units ID. However, no appropriate entry could
be found.

Hi,
It says -
Solution
This is corrected in the Support Package for Release 4.70, 5.00, 6.00, 6.02 and 6.03.
We are running on 6.00 , how ever i will go through the Correction Instruction... thanks

Entries in table CDHDR for transaction MM02 missing after upgrade to ECC6.0

Hi,
I am supporting a client who has just performed an upgrade from 4.7 to ECC6.0 on their test system. We try and use transaction MM04 (display material master changes) or MM02 and view changes to the material master but there are no entries.
During the upgrade, the entries for transaction code MM02 in table CDHDR have been lost. Can anybody give me assistance on how to avoid this when performing the production upgrade, or even better, is there any way to get these entries back?
Thank you.
Sharon.

That shouldn't happen - entries shouldn't get lost.
Is there anything in the CDHDR table (by browsing it with SE16)? If not, then something went wrong during the upgrade....
Have there been modifications to the table? Is the the table active in SE11?
Markus

Error while saving SO - item 000010 is missing in table YVBAP

Hello Experts,
We are facing following issue while delivering an order with BOM material.
1)     We created an order with sold-to customer blocked for delivery.
2)     Then we removed the block from customer and also from document header/shipping tab.
3)     Now when we tried to save the order it showed us an error-u2018item 000010 is missing in table YVBAPu2019
We are not able to find the root cause of the issue. Could anyone please help us in this error?

Hello,
Please check whether delivery block is also removed under sales Tab of item overview. Also check at line item level, whether delivery block is removed for BOM items. Once this done, save the sales order again and try to create delivery.
Br,
Tushar

Entry 001 is missing in table tab_fskb

Hi , I get a problem when I use t-code:fb70, the error message is "entry 001 is missing in table tab_fskb" , is tab_fskb a table ? I use se16 to view the table ,but there is no table named tab_fskb. who can give me some solution?
thanks a lot

Dear Victor,
Once you open a particular thread, after that why you don't follow it..?
Forget about awarding points to a helpful suggestion or closing a thread,you don't even reply when anybody starts showing interest in your question.
Yesterday you asked:
What should I pay attention to do a successful client copy ?
I do the remote client copy successfully , I see the message"remote client copy complete" in SCC3. but the developers say they can not do the post.
so , I want to have your advices about how to do a successful copy. what should I pay attention to.
And when I asked for certain information:
Please specify the following things to help us analyze your situation.
1. Your system landscape
2. Your source and target system while doing the remote client copy.
3. Also why you did client copy and more details about the problem that your developer is facing.
Then only we can guide you.
You didnt replied and again opening a new thread today
PS: What you expect from others..?..To share knowledge when you dont even follow your post and least bothered about answering certain doubt of various potential repliers.
Regards,
Ashutosh

Schedule line is missing in table YVBEP

Hi All,
We added a new custom field in schedule line tab. For which we added code in PAI and user exit MV45AFZZ. When we are adding a schedule line we are getting the following error message:
Schedule line 000010 0004 is missing in table YVBEP
Message no. V1506
The schedule line 0004 for the item# 000010 is having only 'confirmed qty' and 'rounded qty and order quantity' are both 0's. This schedule line was generated as there was no stock for the schedule line entered by user .
Please let me know what has to be done to resolve this issue.
Thanks,
Karuna.

Hi
See SAP Note 178328 - Problems due to incorrect user exits in SD.
This note says:
The Y tables play a role only for the change mode of document
processing. They contain the original status of those table entries
that have been changed during the current transaction. Therefore,
the entries in the Y table reflect the previous status of the
document in the database.
and
You add a table entry. There is only one entry in the X table
that has the update indicator I. There is no entry in the Y
table.
so, check in XVBEP that the field UPDKZ has the value 'I'.
Read carefully this note
Regards
Eduardo

Upgraded to the 4 version and now my identity safe feature for norton is missing how do i get it back

I upgraded to the newest version of Mozilla Firefox, and once it was installed and ready for use, my Identity Safe feature for Norton is missing. I do not know how to get it back in the toolbar area. So I retro-graded back to the 3.6-16 version of Firefox, and wallah it's there even the updated version too. So why doesn't my Norton Identity Safe appear with the new version????

Symantec need to update their Firefox add-ons so that they are compatible with Firefox 4. They have indicated that for Norton 360 they plan to release an update to Norton 360 to support Firefox 4 in early May - http://us.norton.com/support/kb/web_view.jsp?wv_type=public_web&docurl=20100720113635EN&ln=en_US
I do not know about the time scale for updates for other Norton products. Pending the update by Symantec, if you want to use the Norton add-ons you will need to downgrade to Firefox 3.6.
To downgrade to Firefox 3.6 first uninstall Firefox 4, but do not select the option to "Remove my Firefox personal data". If you select that option it will delete your bookmarks, passwords and other user data.
You can then install the latest version of Firefox 3.6 available from http://www.mozilla.com/en-US/firefox/all-older.html - it will automatically use your current bookmarks, passwords etc.
To avoid possible problems with downgrading, I recommend going to your profile folder and deleting the following files if they exist - extensions.cache, extensions.rdf, extensions.ini, extensions.sqlite and localstore.rdf. Deleting these files will force Firefox to rebuild the list of installed extensions, checking their compatibility, and reset toolbar customizations.
For details of how to find your profile folder see https://support.mozilla.com/kb/Profiles

Golden gate missing checkpoint table

Hello gurus,
I am trying to implement live replication with Golden Gate but I can't create the checkpoint table.
GGSCI () 26> ADD CHECKPOINTTABLE
ERROR: Missing checkpoint table specification.
GGSCI (q) 27> ADD REPLICAT rep1, EXTTRAIL /t01/software/gg2/dirdat/rt
ERROR: No checkpoint table specified for ADD REPLICAT.
GGSCI () 28> ADD CHECKPOINTTABLE
ERROR: Missing checkpoint table specification.
GGSCI (qcdvap1031.gnet.qc.bell.ca) 29> edit ./GLOBALS
ERROR: Invalid command.
GGSCI () 30> edit params ./GLOBALS
GGSCHEMA GGS_OWNER
CHECKPOINTTABLE GGS_OWNER.CHKPTAB
GGSCI (q) 31> ADD CHECKPOINTTABLE GGS_OWNER.CHKPTAB
Successfully created checkpoint table GGS_OWNER.CHKPTAB.
GGSCI () 32> ADD REPLICAT rep1, EXTTRAIL /t01/software/gg2/dirdat/rt
ERROR: No checkpoint table specified for ADD REPLICAT.
Not sure what I am missing here, can anyone please help?
Thank you very much,

Hi,
Use the CHECKPOINTTABLE parameter in a GLOBALS parameter file to specify the name of a
default checkpoint table that can be used by all Replicat groups in one or more Oracle
GoldenGate instances. All Replicat groups created with the ADD REPLICAT command will
default to this table unless it is overridden by using the CHECKPOINTTABLE option of that
command.
To create the checkpoint table, use the ADD CHECKPOINTTABLE command in GGSCI.
Regards,

Customization for S100 j_1iindcus missing in table

Similar Messages

Maybe you are looking for