Customization of Object Link of Transaction CV01N

Hi All
Can anybody help me out in Customizing Object Link of Transaction CV01N.
I want to know exactly how could we add a customized tabstip in object link other than SAP Standards like Equipment Master and Material Master.
How could i link these to R/3 transactions like MB03, FB03, CJ20N etc....
When i save these documents it should get generated and saved to the document data of the respective transactions.
Thanks
Raja

hi,
You can also link documents with SAP objects for which no linking is supported in the standard SAP System.
In Customizing for the Document Management , you must maintain the key fields for the SAP objects that you want to link to document info records, by choosing Control Data  Maintain key fields.
1. Program two screens for the following module pools for the SAP object that is to be linked additionally:
u2013 SAPLCV00
u2013 SAPLCVIN
The process logic must be according to that of screen 0204 in program SAPLCV00 and must not be changed.
2. Create the function module OBJECT_CHECK_XXXX (XXXX = name of the SAP object).
If this object can be classified, this function module already exists in the standard system. Otherwise, copy the existing function module OBJECT_CHECK_EQUI (linking of equipment) and change it to suit the new object.
After you have completed the above, documents can be linked with the SAP object that you have added. You define the settings for this in Customizing for the Document Management System (see: Object Links).
regards, benakarajes

Similar Messages

Add a new type of object links (transaction CV02N) - by material group .

Hi experts .
How can I create an additional screen for new tab by material group
       in DMS System ?
I have a requirement : 1. Add a new type of object links in transaction CV02N
                                      by material group(V023-MATKL) .
                                    Today we use 2 existing options : by Equipment and material .
                                  2. Save and display data .
We did the following steps :
1 . In customizing for Document Management :
               a. Maintained a key fields :
                      table : V023 , tran.code : OMSF , field name : MATKL .
               b. Maintained screen object link for V023 .
                     Our problem is screen number . we used at existing screen - 500 for user exit.
                     So we get a new tab with material instead of material group .
                     How I can create a new screen with field material group
                         for set this screen number in step b ?
                     May be I need the access key for FUNCTION GROUP CV130
                     and create this screen by myself ? .
               c. Defined Object links for special document type .
2 .   Created in se19 at implementation of DOCUMENT_OBJ
                      with defined filter : V023 .
                      Regards Helena .

Hi Nuno,
how did you solve this problem?
tks

RE-FX Object link is not working

Hi Gurus
I have added the object VICNCN (Screen Number: 500) in DC10 for a document type. Now i can link Real Estate Contract with a DIR in Object Link tab. When i double click the Real Estate Contract number in Object Link tab then the system will open the transaction RECN. So i hope the DIR is attached to that number.
But when go to transaction RECN and select the menu Extras--> Document Management then the system prompts a message to create a New Record. Suppose if click "Yes" then it shows a error "Model Not Found". Actually the Real Contract Number has already been linked in Object Link Tab in CV01N. But it is not working properly.
Can anyone please help me to fix this issue.
Regards
Vasim Raja. R

HI Nayeem,
Please maintain Authorization group 1 in Maintain screen for Object Link :
Maintain 1 in Auth. field. Then go to RECN, Extras, Document Management there u will find Creation of document from RECN.
Regards
Jayanth

Problem about Object Link customizing.

Hi guys:
I want to customize the "object link".
In the Layout of user interface>Navigation(URL Generation)>Assign Object Method to Role, there is a field ,IDPage/Service, need to be maintained. How and where can I get the content to fill it?
Can anyone help?
Thanks

I am also very interested in this topic. The pc-ui cookbook best I can tell does not provide a simple example demonstrating this functionality...I would welcome some doc like this.
I am faced with the problem of improving navigation. Essentially the use case is: in
CRMD_MKTPL (marketing planner) pc-ui the user can hit the button "Generate Trade Event"...this will do its thing and issue an info message saying Event 1234 has been generated...the desire by the customer is to open the same app in a new window using the newly generated event id. I think that the pc-ui navigation(URL Generation) should be usable for this?
Am I right to assume that you have to have the portal available to test this? (at the moment I am working remotely)
Any help on this topic is appreciated
Thanks

Object link with RFQ

Hi
How can we Object link with Request for Quotation (RFQ)?
Regards

hi,
YES,
you could use object link in DMS, CV01n, Basic data screen, select request for quatation, and add your RFQ Number.
save the entry.
note: prereqisite is u have to configure this object in DC10. object is 'EBAN' in define Object links.
Benkaraja
??P

Customized tabstip for CV01N in Object link tab like customer ,material

Hi Friends,
Can anybody help me out in Customizing Object Links tab for Transaction CV01N.
I want to know exactly how could we add a customized tabstip in object link other than SAP Standards like Material Master, WBS element and etc.
I want to know whether do we have any SAP Note or any Badi to get the tab strip in Object Link tab.
Thanks in advance.
Satish Raju

Hey,
Material master is standard object to link to
Go to IMG ->Cross-Application Components->Document Management->Control Data->Define Document Types
choose the document type and double click at Define object links and "New Entries"
and enter
Document Type: Your document type
Object: MARA
Screen no.: 201
When New Version: Decide what you want
Create Document: Decide what you want
Document Version:Decide what you want
BR/Håkan

Open link in object link for calling sap R/3 Transaction.

Hi all,
Can anyone help with the steps to be done in order to call an SAP Transaction in cProjects via services to Object Links. We succeeded to get the object links from R/3, we are able to see the 'open' link under 'Application' in the Object Link Tab for some of the object type like Routing, Inspection Plan .
1. But some of the Object Types like Documents from DMS Etc can be selected and linked but does not have any 'Open' link(blank).
2. But some of the object types are not searchable. (The search provided no results; Choose other search criteria ) Message is appearing even though we give the correct search criteria.
Pls guide me to solve the issue
Thank you,
Ramesh.

Hi Dev,
as this thread has been closed in the meantime (the original poster seemed to have found the solution by himself), I'd suggest you post your question as new one.
Or you check the material you can find at [service.sap.com] at the SAP Support Portal. E.g. Release & Upgrade Info > Installation & Upgrade Guides > SAP Business Suite Applications > SAP PLM using cProject Suite 4.5 > cProjects: Guide for Implementing Object Links
I think inside this document you can find all the information you need.
Best regards,
Thomas

Need to know Objects Linking for MM Transactions MIGO & ML81N

We have a typical requirement to store & retrieval of Inspection Records / Reports which were used during Goods Receipt in MM i.e QA32 / or MIGO Transaction & also at service Entry Sheet i.e ML81N ( MM Transaction ).
Can anyone help how can we achieve this as we are implementing DMS in ECC 6.0 on EHP 5.
The purpose is to store Quality Inspection records while doing Goods inspection in QA32 , & same is doing while passing service entry sheet ML81n. At any time in future we would be able to pull out soft / PDF copy of inspection reports as certified by Quality dept.

Hi Umesh,
Please note that SAP DMS doesn't extend any object linking feature for MIGO transaction.A better approach to meet your requirment would be to store documents via Archivelink.The key steps involved are:
- Content repository definition for Archivelink
- Document type creation
- Assignment of the above document type to MIGO business object BUS2017
Regards,
Pradeepkumar Haragoldavar

Object link to STPO_DOC cannot be changed in this transaction

Hi All,
I am linking the BOM to Document info record, where I am getting a message as "Object link to STPO_DOC cannot be changed in this transaction".
It is working in other way, when I go in BOM header and Link the Document, it is reflecting in the Document inforecord.
Object links maintained in DC10 settings for
STPO_DOC
STKO_DOC
Need your suggestions on this problem.
Regards,
Venu

Hi Venu,
those links were designed in order to support Digital MockUp (DMU) in the Engineering Workbench, the CAD Desktop and the Produktion Order. The idea here is, that via the CAD Direct Integrations those links to the Documents are set automatically, also the transformation matrix and bounding box is transfered.
So a maintenance via the Gui is not supported, as far as I know. Only via the APIs.
Best regards,
Martin

Calling an SAP Transaction in cProjects Object Links

Hi all,
Can anyone help with the steps to be done in order to call an SAP Transaction in cProjects via services to Object Links. We succeeded to get the object links from R/3, but we are not able yet to see the 'open' link under 'Application' in the Object Link Tab. I read some documentation, it seems that an ITS server is required... Has anyone succeeded to do the right setting?
Thank you,
Lacramioara

Hi Lacramioara,
You have to enter the ITS Web server name in the Web Server field (IMG activity Make Settings for Calling an SAP Transaction"). The server is required if you want to call a Web application for processing a linked object.
Regards
Deepak

Mass deletion of Object link of IN05 transaction

Hi Guys,
We have a possibility to mark an object link for deletion via transaction IN05. Do we have any possibility to do the same in mass and not object link by object link??
Please help me, if any one have idea of this.

I dont think there is any standard transaction to do this in mass.You may have to develop some custom program to accomplsih this.
Thanks
Narasimhan

Object Link As BOM Header in CV01N / 02N.

Dear Experts,
While Creating or changing document I m not able to Assign BOM header Mat.Code in Object Link Tab.
Getting Message as :
" Object link to STKO_DOC cannot be changed in this transaction
Message no. 26321 "
Please Suggest,
Regards
Raghu

Hello,
Yes its not allowed to add object links of type: PORDER, STPO_DOC, STKO_DOC & DPR_OBJLNK in DMS.
If you want to link document to these objects, it should be done from bom header transactions and not from cv0*n transactions.
Regards
Surjit

CProjects -List of ERP PS-transactions for an object link is not displayed

I have created an object link between a cProject project definition and a standard object type 0PROJECTDEF- Project Definition (PS). In the cProject guides I can see that in the portal Object link tab there should be a column with a link u201Copenu201D, where I could go directly to the related PS transactions. For me the column at the right from the name column is empty. I have maintained services for this object type in IMG node Collaboration Projects - Connection to External Systems - Object Links in SAP Systems - Make Settings for the Linked SAP Objects.
What should I do to get the u201Copenu201D link?
Iu2019m using SAP RPM 4.5 (CPR Xrpm 450_700: Support package 0009)
Any help appreciated

I do not speak or read Russian but the site you link to appears ok to me with text and pictures of flowers which will scroll across the screen similar to a slideshow.
# The other question and answes suggested reloaing the web page have you already tried that ? <br />Use keyboard keys Control+ F5
#I note you have adblock installed is that causing the problem? Try disabling that.
#Otherwise try Firefox in SafeMode and make sure you clear the Firefox cache and site cookies. See
#* [[Troubleshoot Firefox issues using Safe Mode]]
#*[[How to clear the Firefox cache]]
#*[[Delete cookies to remove the information websites have stored on your computer#w_delete-cookies-for-a-single-site]]_delete-cookies-for-a-single-site

In DMS,CV01N,CV02N, object link for production order is not enabeling

Hi,
To the Document in cv01n or cv02n, while trying to give production order in Object Link : Production order tab, The order tab is not enabling. How to enter the production order in object link and can we do this thing in change mode.
Regards,
Mastan.

Hi Mastan,
You need to enable the object PORDER and screen number 251.This is used to transfer of Document from Material master or Bill of Material based on Production Scheduling Profile (Header material) Configuration.
Please refer below document for more details
http://scn.sap.com/docs/DOC-35058
Regards,
R.Brahmankar

Error when attaching object link in DMS

Hi Experts,
I am calling the function module CV110_DOC_CREATE in my program. This program i have attached to a ztransaction.Thus the screen after entering the document type, document version and part in the cv01n transaction appears when my ztransaction is executed. But the problem is that i can attach object link (document info record) when the ztransaction is executed initially. But when i click on back button and again comes to the screen i am not able to attach the object link.Then it gives an error as " Object does not exist". Please help.

When the back button is clicked screen for my ztransaction comes.From there it is calling the actual screen to attach the object link.there i am trying to attach the object link again...then it is saying as object does not exists. This same dir i have attached earlier as object link when the ztransaction was run initially.

Customization of Object Link of Transaction CV01N

Similar Messages

Maybe you are looking for