Customization settings required for Extenal service managment

Hi,
Till now we are not using External managment , now we want to confifure this  , so what are the settings required for this.
regards,
  zafar

Hi,
1. If you are selling the Service , Use Material Type u201CDIENu201D and for billing with SD module ,u have to use MM with HR module like (Time & Material ) ie…..Expense recording (PR05) then PRRW and PRFI.
2 .If vendors provide service for you and you can procure the service and pay to vendor.
The configuration required are:
2.1. Define organization status for service category
SPRO u2013>MM-> ESM->Service master- >Define organization status for service category
2.2. Define Number Ranges
SPRO u2013>MM-> ESM->Service master- >.Define Number Ranges
2.3. Define Service Category
SPRO u2013>MM-> ESM->Service master- > Define Service Category
& you can do assignment of cost object ( cost center, project, sales order) with co.code with G/L account in OKB9 t.code and in t.code OBYC account assignment of GBB,WRX with G/L.
***After above you can create Master data as Service master AC03
& the transactions are
A. Create PO ME21N (Acc,assment cat. K or P or C as required and item category D) and enter other detail with service master.
B. Create SES w.r.t. PO in ML81N
C. MIRO w.r.t. SES
D. Payment to vendor in F-53
For more Check the link:
http://sapmm.wordpress.com/category/esm/
Regards,
Biju K

Similar Messages

  • What customization settings required for automatic availably check,

    Dear Guru's
    While doing Sales order my availability check should be carried out, but it is not happening automatically, what settings required for the automatic availably check. Pleasantly we are doing it manually.
    Regards,
    Kalyan

    Hi Kalyan,
    ATP check requires following configuration setting.
    1) The availability check is indecator needs to be switched on at requirement class lavel.
    2) The availability check is indecator needs to be switched on at schedule line lavel.
    3) Set availability check 02/ 01(individual / daily requirement) in Sales Genral plant view of Material master.
    4) Set the checking group in the MRP3 view of Material master.
    5) Above all a plant must be assigned to the line item in the sales order.
    Please do let me know if you have any concern.
    Thanks,
    Rupak.

  • What are the settings required for QM in procurement

    Hi Team,
    What are the settings required for QM in procurement. I have  set indicator for QM in procurement in QM view in material master.
    I am not clear about  following fields to be maintained in QM view.
    QM Control Key
    Certificate type
    Target QM system
    Tech. delivery terms Indicator.
    Please suggest me in which case to be used this fiels. Is it relivant to Quality Certificates.
    Thanks

    Hi,
    All meaning are
    QM Control Key :
    If you activate the indicator for QM in procurement in the material master record at the client level, you must also store a control key at the plant level for quality management in procurement.
    Certificate type :
    Certificate types applies to the Certificate processing in procurement  &  Certificate creation
    Target QM system :
    whether the vendor's verified QM system, according to vendor master record or quality info-record (for a combination of vendor/material) meets the requirements for QM systems as specified in the material master
    -  If you activate the indicator for QM in procurement in the material master record at the client level, you must also store a control key at the plant level for quality management in procurement. If you want Procurment control then accordingly define Control Key.
    -  If you want Vendor's perticular certificate for Material then you have to define Certificate type.
    Also, you have to maintain Material, Vendor's Info record at plant level.
    Thanks,
    JM

  • Requirements for SAP Document management system in ECC 5.0

    Hi All,
    Can any one provide me the requirements for SAP Document management system in ECC 5.0.
    SAP Component   ECC 5.0
    OS    Solaris 5.9
    DB    Oracle 9.2.0.7
    Thanks in advance.
    Regards,
    Surendra
    <removed_by_moderator>
    Edited by: Juan Reyes on Aug 6, 2009 12:49 PM

    That info is available either at http://service.sap.com/pam or http://service.sap.com/quicksizer
    Please do some research before posting
    Read the "Rules of Engagement"
    regards
    Juan

  • Condition-pricing for External Service Management

    Dear Support,
        Please provide the detail document for pricing for External Service Management,and the use of procedure MS0000 (Performance Procedure) & procedure MS0001 (Perf.Procedure f.Master Cond.)

    Hi,
    please read the following SAP notes:
    499722 
    25357
    27024
    691852 
    438718
    798798  
    353482
    Regards,
    Edit

  • Issue working with WPF client v6.1.0.3 for SAP Service Manager 4.0

    Hi All,
    This issue is similar to an on - going discussion -  http://scn.sap.com/thread/3508608
    Issue Description :
    1. We installed WPF client 6.1.03 for SAP Service Manager 4.0 using SMP 2.3 SP00. We got the below error
    2.  To solve this error we followed the forum - http://scn.sap.com/thread/3465106 and installed the certificate following the link for installing the self signed certificate from Sybase infocenter.
    3. We came to know that this is due to the SMP version. hence as suggested by SAP we upgraded the server to SMP 2.3 SP03
    4. We tried to connect the WPF client and again got the error "Communication error 14"
    My Question is
    1. After the server upgrade from SP2.3 SP03 , do I still need to generate a certificate again ? Is yes Please guide me the steps/document to do this step
    2. Is there any document which mentions how exactly we use the WPF client, the configuration  to connect the SAP backend and download the Syclo Service Manager 4.0 application without any issue
    Please guide
    Thanks
    Neha

    HI Steve,
    I tested with the WPF client 6.1.3.X.
    I was getting a different error with the host name "Connect to server  myhostname certificate is for myhostname:domain name this is not valid. Commnication error(14)
    However I got the solution in one of the link where they mention to provide the complete fully qualified domain name in the server ie myhostname:domain .
    This has solved the issue and the WPF client is up and running.
    Thanks for the help
    Regards
    Neha Mahanty

  • Settings required for including changes in data in a transport request.

    Hi All,
    I need the settings required for saving ths data changed in a database table into a customizing request.
    Kindly let me know the steps involved in the process.
    To elaborate:
    I have a maintenance screen for a DB table.
    Whenever a user creates/changes data to/from the DB table , using the maintenance screem, the data should be saved into a customizing TR.
    Regards-
    Harmeet Singh,

    Hi there,
    Any config change will be saved under a transport request TR. Also tables are of 2 types: Customizing table & application table.
    Changes / new entry in a customized table are transportable. You will gte a TR when the customized table values are changed / new entry.
    But application table entry / changes are non transportable. You willnot get a TR when saving the data.
    To know it, go to SE11 --> give the table name --> display --> attributes --> Delivery class. Delivery class A is application table, C is customizing table.
    Also some standard tables like MARA, VBAK are not allowed to maintain. If a table is allowed to be maintained, table maintaience allowed is checked in the above.
    Regards,
    Sivanand

  • Additional customization is required for HR WF (HR trans Event trigger)?

    Hi Friends,
    I am trying to raise one event from one HR transaction (Create Appraisal). But same event id is being generated always in the standard program. So I tried creating one Z program and called the function module SWE_EVENT_CREATE and commit work. Still it is generating the same Event id always (00000000000000001). I tried to trace the event but it is not tracing anything, I am just getting one ON and one OFF. Can anyone please suggest me any additional customization is required for HR transaction’s workflow triggering.
    Thanks & Regards
    Sujith

    That's slightly misleading I would say.
    SWEHR1 tells you which object types and infotypes it is possible to have events created for. It is SAP data and you should definitely not modify it.
    SWEHR2 tells you which event creations SAP have set up already. It is SAP data and you should preferrably not modify it.
    SWEHR3 is your customer event linkages. If you want to have events created for an object type/infotype combination SAP hasn't defined, or you want additional events or other events for a combination SAP has defined, this is where you should perform your customizing.

  • Assign G/L Account to Account Key for External Service Management

    Dear all,
      Using SM30 V_T687 transaction key is maintained and it is accepted in Service Management caculation schem but now i have to assign GL accoutn to it.
    Kindly guide me where i can assign GL account for this newly created transaction key as this one is not appearing in OBYC.
    Thanks & Regards
    Dipayan Bose

    Hi,
    In service procurement, you need to create a service master(AC03) , you need to enter valuation class for service(3200).In OBYC, you just assign need to assign GR/IR Clearing (service) with G/L account only & no valuation class for service assignment requires in OBYC setting for service. Service A/c triggered from OKB9 setting or cost element (KA01/KA02) with cost object assigned.
    Service order or purchase order created with Acc. assignment ' K' and Item category 'D' , the system automatically pick UOM is "1" activity unit in Item Overview and in item details you need to maintain the service master ,UOM, quantity & price /unit and then G/L account with cost center .
    During SES(ML8N), you are just recognizing vendor performed service where you can have cost object(cost center) with service master with quantity etc.....No FI document created after creating/maintaining the Service Entry Sheet in ML81N but once you release the Service Entry Sheet, then only FI documents created.
    If GR valuated for service procurement: You will have accounting entries:
    During SES release:
    Service A/c: Dr
    GR/IR(service) A/c :Cr
    During IR
    GR/IR(service) A/c :Dr
    Vendor A/c: Cr
    Service tax A/c: Dr
    NOTE:
    Default G/L account with cost center in Service PO can be set, check link:
    http://www.bluemarlinsys.com/ns/0603-03.asp
    Regards,
    Biju K

  • Initial settings required for Made to Stock -10 strategy.

    Dear Frndz,
    Kindly help me with the step by step procedure to do the initial (SPRO) settings required in SAP PP to carryout the Made to Stock -10 strategy in the system.
    Regards,
    Srini

    Hi,
    For MTS, maintaining the Planning Starategy 10 in Mtrial MAster is the Only thing we need to do.
    System by default will do the rest of the things for you.
    In MD61, system will propose Requirements Type LSF.
    Sales Order will be for Inforamtion Purpose.
    PIR will be reduced after PGI to the SO.
    If you require any specific thing pl. inform.
    Regards,
    Siva

  • How can I retrieve/compute an X509 certificate's thumbprint in Python and then use it for accessing Service Management APIs from Python SDK?

    Hello,
    I am using Azure Python SDK to perform calls to ServiceManagement APIs.
    I have a .publishsettings file generated for my account which includes an encoded version of my X509 certificate and all of my subscription IDs.
    How can I retrieve/compute an X509 certificate's thumbprint in Python?
    Following is the code snippet that helps us do it in .Net.
    Is there a similar approach to do it in Python?
    var publishSettingsFile = @"C:\temp\CORP DPE Account-11-16-2011-credentials.publishsettings";
    XDocument xdoc = XDocument.Load(publishSettingsFile);
    var managementCertbase64string = xdoc.Descendants("PublishProfile").Single().Attribute("ManagementCertificate").Value;
    var importedCert = new X509Certificate2(Convert.FromBase64String(managementCertbase64string));
    thumbprint = importedCert.Thumbprint;
    Once I have the thumbprint, how can I use that thumbprint to access Service Management APIs from Python SDK?
    Thank you in Advance!
    Regards,
    Vaibhav Kale

    Hi,
    Please have check on the below article and check if it helps.
    http://azure.microsoft.com/en-in/documentation/articles/cloud-services-python-how-to-use-service-management/
    Regards,
    Mekh.

  • FPMComponent required for Help Service to work?

    Hi,
    This question may sound stupid but I need to confirm.
    Is the FPMComponent required to be used for Help Service to work?
    I have configured help services. On some ESS pages it is being displayed. But it is not showing in some cases. I observed that the FPMComponent was not being used when it is not displayed. So kind of figured this out.
    Please let me know if I am right.
    Thanks and regards,
    Mayuresh.
    Edited by: Mayuresh Kanvinde on Nov 24, 2009 7:24 PM

    Hi Manuel,
    in logical components the term "Logical System" is used to discribe the combination of system and client in an ABAP system. This does not mean you have to define logical systems in ALE customizing. That is not required as far as I know.
    Regards
    Andreas

  • FPMComponent required for Help Service to work in ESS?

    Hi,
    This question may sound stupid but I need to confirm.
    Is the FPMComponent required to be used for Help Service to work?
    I have configured help services. On some ESS pages it is being displayed. But it is not showing in some cases. I observed that the FPMComponent was not being used when it is not displayed. So kind of figured this out.
    Please let me know if I am right.
    Thanks and regards,
    Mayuresh.

    Hi there! @microcellfree thanks for posting your concerns.
    I’m sorry to hear you are having signal issues at home and can understand how frustrating that can be.
    We’ll be happy to see what options we have for you.
    please private message me by clicking here and provide your name, the address where you experience this issue, including the city, state and zip, and a good contact number.
    Thanks!
    Charise
     

  • Recurring Inspection is required for non batch managed material

    Hi Gurus,
    My scenerio is I want recurring inspection of material  but my material is not batch managed. is there any way around to cater this requirement?
    Regards

    Without Batch management the reccuring inspection is not possible because if you receive 100 quantity of material A on date X and consume 50 and again you purchase 50 on daye Y and comsume 30 out of it .. Then how the system will know about when to trigger this inspection and for how much quantity..Even you use development the system canot identify the materials got consumed .. If it is serialized material then you can do it by creating the development table and maintaining the receipt date for each serial no and the inspection date...

  • CATS for external service management

    Dear,
    We would like to use CATS for registering services performed. Can these services also have other units than time units (ex. confirmation on number of square meters worked on,...)? And can these services which are to be used in CATS be related to purchase orders coming from contracts (ex. contract with a supplier for digging 10m2)?
    Thanks for the reply.

    Hi,
    please read the following SAP notes:
    499722 
    25357
    27024
    691852 
    438718
    798798  
    353482
    Regards,
    Edit

Maybe you are looking for

  • Finder will restart when i try and open a finder window, how can i fix this?

    I cant seem to find a fix through google, most people have it happing ever 5- 10 seconds.  Mine issue comes up about 50% of the time,  times the finder window will stay open other times it will just close down finder, all desktop icon disapear.  afte

  • Windows 8.1 lock screen

    Hi there, I would like to ask about lock screen. Normally, when I turn the screen off using function key, it will lock the screen and when I press any key, windows will ask for authentication. But after receive some updates, I cannot not do this anym

  • Speaker problem in Windows (Macbook Pro 15" mid-2012)

    I've got a problem with my speakers on my Mac which I can't find any solution or logical explanation for why it is happening. When I'm in Windows 8 (installed through BootCamp), the speakers only play the higher frequencies, like 1000Hz and above. Th

  • Problems to reconize the sim card after upgrade itunes, what should I do???

    Problems to reconize the sim card after upgrade itunes, what should I do???

  • No apps shown in privacy settings

    In my privacy settings are no apps shown at all. I have apps like PuzzleBox, Skype and others that would like to access my photos or microphone but when I go to privacy settings no apps are shown in any of this sections. How can I solve this?