Customization tables and transactions

Hi everybody,
I have a very simple question:
I would like to know if every customization table is accessible through a transaction code.
If yes, then were can I find a table that contains the connection between customization table names and the transactions, which open them?
If no, then how can I access a customization table except for doing that through the SPRO?
Thanks,
Roy

Hi,
Check the table OBJSUB and
[How do I open a customization table for editing using my program?|Re: How do I open a customization table for editing using my program?;
Cheers,
Remi

Similar Messages

  • Field sales related tables and Transaction code

    Dear SAPGurus,
    I have been working with field sales activities in mySAP CRM..
    Can I have the list of the tables and transaction code related to Field sales sales activies..
    I am grateful for ur help....
    I would like to appreciate u by rewarding the points
    Thanks a lot

    Hi Pratik Patel,
    Thank u very much for sending the table names.They are all very useful unto me
    Can I have the more table in this area
    If u have the CRM Data model and its relationship...Pls share with me..
    I  appreciate ur help by rewarding the points
    Regards,
    CRM Consultant

  • PM Tables and Transaction

    HI...
    Plz provide the Plant maintenance(PM) Tables and Transaction.
    And detais about PMIS?? Use of it??
    thanks..

    Hi,
    PM T codes and PM Tables
    Equipement-- Maintable-EQUI
    Functiuonal location-     IFLOT
    Serial number             -SERI
    Material master         MATNR
    IE01                 Create Equipment
    IL01                 Create Functional Location
    IB01                 Create Equipment BOM
    IQ01                 Create Material Serial Number
    MM01               Material Master
    IB 01, IB11       Bills of materials
    IW21 - Notification creation
    IW31- PM order IA07 Display General Task List IA03 Display Equipment Task List IA13 Display Functional Location Task List IR03 Display Work Centre KO88 Settle Order (Single) IW32 Change Work Order IW31 Create Work Order IW33 Display Work Order IW38 Work Order List Editing - Change IW39 Work Order List Editing - Display IW40 Work Order List Editing - Display Multi Level ME21 Create Purchase Order (pre R4.6) ME21N Create Purchase Order (R4.6 onwards) IP41 Create Single Cycle Plan (R4 onwards) IE02 Change Equipment IE01 Create Equipment IE03 Display Equipment IE05 Equipment List Editing - Change IE08 Equipment List Editing - Display IW42 Overall Completion Confirmation IW26 Create Notification QS42 Display Catalog ML81 Create Service Entry Sheet MM03 Display Material CS03 Display Material BOM IW13 Material Where Used List IW66 Change Notification List of Tasks IW67 Display Notification List of Tasks IW22 Change Notification IW23 Display Notification IH01 Display Functional Location Structure MB11 Goods Movement MB31 Goods Receipt IW8W Goods Receipt for Refurbishment (R4 onwards) IP02 Change Maintenance Plan IP03 Display Maintenance Plan IP10 Schedule Maintenance Plan IP30 Deadline Monitoring IP11 Change Maintenance Strategy IP12 Display Maintenance Strategy IP19 Maintenance Scheduling Overview Graphic IP24 Maintenance Scheduling Overview List IW28 Notification List Editing - Change IW29 Notification List Editing - Display IW30 Notification List Editing - Display Multi Level IW64 Change Notification List of Activities IW65 Display Notification List of Activities IW68 Change Notification List of Items IW69 Display Notification List of Items IQ03 Display Serial Numbers IW24 Create Notification IP42 Create Strategy Maintenance Plan (from R4 onwards) IW25 Create Notification IL02 Change Functional Location IL01 Create Functional Location IL03 Display Functional Location IL05 Functional Location List Editing - Change IL06 Functional Location List Editing - Display IW41 Time Confirmation - Indvidual Entry IW48 Time Confirmation - Collective Entry with Selection IW44 Time Confirmation - Collective Entry no Selection IA11 Create Functional LocationTask Lists IA12 Change Functional Location Task List IL02 Change Functional Location IA05 Create General Task List IA06 Change General Task List IA01 Create Equpment Task List IA02 Change Equipment Task List IE03 Display Equipment IR01 Create Work Centre IR02 Change Work Centre CA85 Replace Work Centre IP13 Strategy Package Sequence IP14 Strategy Package Sequence IP04 Create Maintenance Item IP05 Change Maintenance Item IP06 Display Maintenance Item IP17 Maintenance Item List Editing - Change IP18 Maintenance Item List Editing - Display IP02 Change Maintenance Plan IP03 Display Maintenance Plan IP15 Maintenance Plan List Editing - Change IP16 Maintenance Plan List Editing - Display IK11 Create Measurement Documents IK12 Change Measurement Documents IK13 Display Measurement Documents IK22 Measurement Documents List Editing - Create IK21 Measurement Documents List Editing - Create IK22 Measurement Documents List Editing - Create IK18 Measurement Documents List Editing - Change IK17 Measurement Documents List Editing - Display IK41 Measurement Documents List Editing - Display Archive IQ01 Create Serial Numbers IQ02 Change Serial numbers IQ04 Serial Numbers List Editing - Create IQ08 Serial Numbers List Editing - Change IQ09 Serial Numbers List Editing - Display IK01 Create Measurment Point IK02 Change Measurement Point Ik03 Display Measurement Point IK08 Measurement Point List Editing - Change Ik07 Measurement Point List Editing u2013 Display and a few PM related tables: TPST -- Functional Location - BOM Link STAS -- BOMs - Item Selection STKO -- BOM Header STPO -- BOM item STPU -- BOM Subitem STZU -- Permanent BOM data RESB - Reservation, Material number, Requirement date, Required Quantity, Quantity withdrawn, Work order number RSADD - Date created, User ID of person who created the reservation MAKT - Material Description AUFK - Work Order description AFIH - Revision (as a selection field) MBEW - Total valuated stock (SOH) USER_ADDR - The User ID first name & second name RKPF - Reservation Header information if required.
    IP01 - maintenance plan
    Plant maintenance (PM) IHPA Plant Maintenance: Partners OBJK Plant Maintenance Object List ILOA PM Object Location and Account Assignment AFIH Maintenance order header AFIH Maintenance Order Header AFKO Order header data PP orders AFPO Order item (not used much) AFRU Order completion confirmations AFVC Operation within an order AFVV Order position data CRCO Assignment of work center to cost center OBJK Plant Maintenance Object List CRHD Work Center Header PLAF Planned order HIKO Order master data history HIVG PM order history: operations Logical databases: CNJ AUFK Order master data AFKO Order header data PP orders AFPO Order item JSTO Status object information JEST Object status Logical databases: ODK 12.1 Routings/operations MAPL - Allocation of task lists to materials PLAS - Task list - selection of operations/activities PLFH - Task list - production resources/tools PLFL - Task list - sequences PLKO - Task list - header PLKZ - Task list: main header PLPH - Phases / suboperations PLPO - Task list operation / activity PLPR - Log collector for tasklists PLMZ - Allocation of BOM - items to operations 12.2 Bill of material STKO - BOM - header STPO - BOM - item STAS - BOMs - Item Selection STPN - BOMs - follow-up control STPU - BOM - sub-item STZU - Permanent BOM data PLMZ - Allocation of BOM - items to operations MAST - Material to BOM link KDST - Sales order to BOM link 12.3 PRTu2019s production orders AFFH - PRT assignment data for the work order CRVD_A - Link of PRT to Document DRAW - Document Info Record TDWA - Document Types TDWD - Data Carrier/Network Nodes TDWE - Data Carrier Type 12.4 Work center CRHH - Work center hierarchy CRHS - Hierarchy structure CRHD - Work center header CRTX - Text for the Work Center or Production Resource/Tool CRCO - Assignment of Work Center to Cost Center KAKO - Capacity Header Segment CRCA - Work Center Capacity Allocation TC24 - Person responsible for the work center 12.5 Classification CABS Result of the Statistical Analysis of Table AUSP CUFM Customizing: Class/Config: Screendesigner Form TCME Validity for Global Characteristics KLAH Class Header Data KLAT Classes: long texts KSML Characteristics of a Class AUSP Characteristic values SWOR Classification System: Catchwords KSSK Allocation Table: Object to Class TCLG Class groups TCLO Key Fields of Objects TCLS Classes: Organizational areas TCLST Classes: Org. Areas (Texts) TCLU Class Status COCC PP-PI attributes for characteristics COFV Process management - process instr. charact. in ctrl. recipe COME Process management - message characteristics CORE Process mgmt.- display characteristics of the eval. version PLFV PI Characteristics/Sub-Operation Parameter Values TCLA Class Types TCLAT Class Type Texts TCLT Classifiable Objects LTCLTT Classifiable Objects: Texts CABN Characteristic CAWN Characteristic values Logical databases: - Matchcodes: CLAS, MERK en KLSW 12.6 Equipment EQUI Equipment master data EQKT Equipment short texts EQUZ Equipment time segment EAPL Allocation of Task Lists to Pieces of Equipment EQUI Equipment master data JSTO Status object information JEST Object status TJ30 User status TJ30T Texts for user status TJ02 System status TJ02T Texts for system status 12.7 Functional Location IFLOT Functional Location (Table) IFLOTX Functional location: short texts IRLOTX Reference functional location: short texts TAPL Allocation of task lists to functional
    Edited by: Sreenivasu on May 18, 2009 12:43 PM
    Edited by: Sreenivasu on May 18, 2009 12:48 PM
    Edited by: Sreenivasu on May 18, 2009 12:50 PM
    Edited by: Sreenivasu on May 18, 2009 2:06 PM
    Edited by: Sreenivasu on May 18, 2009 2:07 PM
    Edited by: Sreenivasu on May 18, 2009 2:14 PM
    Edited by: Sreenivasu on May 18, 2009 2:15 PM

  • Let me know what is new table and transaction code in ECC6?

    Hi
    As the above title, I want to know what is new table and transaction code, through from R/3 4.6c to ECC6.
    Regards
    Sang lim.

    Hi Sang lim,
    Apart from the tocdes listed above,
    Transactions that changed from Release 4.6 C
    Rel.  Old TCode  New TCode 
    46C  ME51  ME51N 
    46C  ME52  ME52N 
    46C  ME53  ME53N 
    470  FNBD  FNBT 
    470  ME54  ME54N 
    470  ME59  ME59N 
    46A  MR01  MIRO 
    46A  MR02  MRBR 
    46A  MR08  MR8M 
    46A  MR1G  MIRO 
    46A  MRHG  MIRO 
    46A  MRHR  MIRO 
    46A  MRRS  MRRL 
    46B  S_P99_41000327  S_ALR_87100205 
    46C  MR03  MIR4 
    46C  MR1B  MIR6 
    46C  MR2M  MIR4 
    46C  MR3M  MIR4 
    46C  MR41  MIR7 
    46C  MR42  MIR4 
    46C  MR43  MIR4 
    46C  MR44  MIR4 
    46C  MR5M  MIR4 
    46C  OAA2  AUFW 
    620  AFAB  AFABN 
    620  AL01  RZ20 
    620  AL02  RZ20 
    620  AL03  RZ20 
    620  AR11  AR11N 
    620  AR29  AR29N 
    620  ASKB  ASKBN 
    620  CA97  CA97N 
    620  DB02  DB02N 
    620  FM3S  FMCIA 
    620  FM3U  FMCIA 
    620  FMN3  FMN3N 
    620  FMN4  FMN4N 
    620  FMN5  FMN5N 
    620  O02E  BMBC 
    620  OACR  OAC0 
    620  RZ23  RZ23N 
    620  SCOM  SCOT 
    620  SM22  SM21 
    620  SWID  SWI2_DIAG 
    620  S_P9C_18000190  S_PL0_09000447 
    620  S_P9C_18000247  S_P6B_12000136 
    620  VOPA  VOPAN 
    620  VOTX  VOTXN 
    620  WE49  WE42 
    620  WE52  WE41 
    620  WE53  WE41 
    640  ABAW  ABAWN 
    640  AL04  RZ20 
    640  AL19  OS07 
    640  COHVOMAVAILCHECK  COMAC 
    640  COHVOMPI  COHVPI 
    640  COHVOMPP  COHV 
    640  KE1F  KE1FN 
    640  KE29  KE29N 
    640  MKH1  MKH1N 
    640  MKH2  MKH2N 
    640  RZ02  RZ20 
    640  RZ06  RZ20 
    640  RZ08  RZ20 
    640  STAT  STAD 
    640  STMP  SLPP 
    640  VL22  VL22N 
    700  AL05  RZ20 
    700  AL16  RZ20 
    700  AL17  OS07 
    700  OVXA  OVXAN 
    700  OVXG  OVXGN 
    700  OVXJ  OVXJN 
    700  OVXK  OVXKN 
    700  OVXM  OVXMN 
    700  OVX3  OVX3N 
    700  OVX6  OVX6N 
    700  OVX8  OVX8N 
    700  WLAM  WLAMN 
    700  WLMM  WLMMN 
    700  WLMV  WLMVN 
    700  WLWB  WLWBN 
    700  WPLG  WPLGN 
    Regards,
    Kiran

  • Master data tables and Transaction data Tables

    Hello Gurus,
    Please let me know how to know which table belongs to master data  and which table belongs to transaction data.
    for FICO module.
    Does any one  have specific material relating to master data table and transaction data tables.
    Thanks
    Edited by: Manu Rathore on Jan 18, 2012 4:38 AM

    Hi Manu,
    Find attached table relation diagram by Christopher Solomon. It is one of the very comprehensive chart on this topic.
    deleted
    Warm regards,
    Murukan Arunachalam

  • All customization tables without transaction

    Hi all,
    How can I find all the customization tables that cannot be accesses through specific transactions but only through the SPRO?
    Thanks,
    Roy

    Hi Max,
    Thanks this is a useful lead (gave you 6 points )
    Could you please be more specific - I see entries where the OBJECTTYPE = T and that means that these are transactions that lead to the customizations tables, am I right?
    And now the question is how I can filter only those without transactions
    Thanks again for your assistance,
    Roy

  • Customize table and transport

    hi expert,
    How can i transport a customize table that i made from Development server going to Production server? Do i need to set something to it? Pls help me....godbless
    thanks,
    nips

    Hi Nips,
    I think you have saved your customized table as a local object($tmp).
    Just enquire about the package in which this table has to be saved.
    then just open the table then click on the GOTO tab in the toolbar, then click on the object directory entry. Just change package. Then it will ask you for the transport number. CReate a trnaport number and just transport this number to production server.
    To Transport the Transport number.
    GoTo SE10.
    click on your transport number. You will see another transport number attached with it. Just click on that transport number and press F9. Then Click on the above transport number and press F9.
    Here the whole object is transported(Exported) to the destination.
    Now login to your production server and open transaction STMS. Click F5.
    you will get the next screen. click on your production server. here you will find your transport number. just click on it and press CTRL+ F11 and then CTRL+F8. refresh the screen and wait for some time.
    Regards,
    vamsi

  • Temp tables and transaction log

    Hi All,
    I am on SQL 2000.
    When I am inserting(or updating or deleting) data to/from temp tables (i.e. # tables), is transaction log created for those DML operations?
    The process is, we have a huge input dataset to process. So, we insert subset(s) of input data in temp table, treat that as our input set and do the processing in parts. Can I avoid transaction log generation for these intermediate steps?
    Soon, we will be moving to 2008 R2. Are there any features in 2008, which can help me in avoiding this transaction logging?
    Thanks in advance

    Every DML operation is logged in the LOG file. Is that possible to insert the data in small chunks?
    http://www.dfarber.com/computer-consulting-blog/2011/1/14/processing-hundreds-of-millions-records-got-much-easier.aspx
    Best Regards,Uri Dimant SQL Server MVP,
    http://sqlblog.com/blogs/uri_dimant/
    MS SQL optimization: MS SQL Development and Optimization
    MS SQL Blog:
    Large scale of database and data cleansing
    Remote DBA Services:
    Improves MS SQL Database Performance

  • Set up table and transaction data delta load init

    Dear experts,
    I am following a document left by my predecessor on "post processing activities" for BI prod post go-live.
    And for transaction data it says to :
    1. execute init with data transfer infopack manually
    2. execute delta update infopack manually
    3. go to ECC : delete setup data (lbwg)
    4. setup the tables for  (OLIxxBW)
    5. then finally activate Process chains.
    Is this sequence correct?
    Shouldn't I first delete the setup table, setup the tables and then execute the infopackages??
    Regards,
    Alice

    Hi,
    The sequence is correct ,and after this you need to run the job for the collective run in SAP ,which is based on your delta queue.
    i.e if you choose direct delta it is not required ,but if you use 'queued delta' then you need to run the collective run to move the delta from the extraction queue to delta queue .This job should run before the delta load.
       It is better to fill the set-up table during downtime .ie.no documents posted during the set-up table run. But if you dont have an option you can fill the set-up table during operation hours ,but need fo follow certain steps to get all the delta data. You may need to use 'Init without delta transfer' or early delta initialization in the infopackage .You need ODS as a data target to achieve this . Please search SDN ,you will get more information about this.
    Thanks.

  • Table and transaction

    Hi ,
    I created one table and also creted a transaction code for that table where when we execute the transaction all the contents of the table are displayed in display mode.
    Now i made the changes in the table (like field names , dataelements) and activated it.But these changes are not reflecting in the transaction.
    Please tell me how to update transaction with the changes made in the table.

    just check  when u make transaction for table maintinance
    in parameter value  u pass
    show   'X'
    INSTEAD OF THIS PASS
    UPDATE       'X'

  • Details on SAP Warehouse management? Basics, tables and transactions?

    Hi
    Soon i will be working on a SAP WM module as a abaper. I have worked on SD and MM modules but not worked on WM module.
    Can anybody send me the links or guide me where i can find some basic information about SAP warehouse management?
    I am looking for the following.
    1). the complete process cycle in WM
    2). basic tables used in WM
    3). Basic transactions used in WM
    thanks in advance.

    check
    https://forums.sdn.sap.com/click.jspa?searchID=12324135&messageID=4538695
    https://forums.sdn.sap.com/click.jspa?searchID=12324135&messageID=2829284
    Re: WM Flow
    Regards
    Kiran Sure

  • Cost center planning data table and transaction code to view

    Hi,
    I want to see the cost center planning document. In which transaction code, I can see this document.
    In which table, cost center planning data is stored?
    Regards,
    VS ramaiah
    Moderator: Please, search SDN

    Hello,
    I do not think that COEP contains the plan line items*. For plan line items it is COEJ. But as suggested by Christian the better option in case you want to create a report is you use COSS/COSP and COST. The latter is for activity type planning (KP26) and the other two are for cost planning (KP06).
    The transactions to view the plan document is KABP and line items is KSBP.
    * Christian, do correct me if I'm wrong. I was not able to see anything with value type 01 in COEP.
    Kind Regards // Shaubhik

  • Table AFRU, Transaction CO11N, confirmation not released?

    Hi Gurus,
    this question is regarding confirmation numbers (AFRU or other tables) and transaction CO11N.
    can you help me in with problem (Test condition)?
    Send notifications of not released orders.
    my question is how? what table? field? transaction? anything. can someone explain me this? i made an FM that simulates CO11N and it is one of the test conditions.
    Thanks

    Hi,
    Your question is not understood. Can you please explain a bit more. If you question is purely Functional, Please post the same in Functional Forum.

  • Relation between master and transaction data

    Hi experts,
    I have a basic question how the relation between masterdata and transction data is maintained in R/3. As I know first we extract master data and later transaction data in a typical R/3 based scenario.
    1.How does BW knows that , the transaction data are  related masterdata in the same sense as in R/3 ?
    I am involved in an enhancement of R/3 extractor. I need to derive 3 more fields and map it to info objects in BW. Cld any one explain me ( with an example plz) how these alignments to be made. How can I establish relation b/w derived fields and transaction data during extractions ?
    regs
    D Bret

    Hi Dave.
    Let's see if I can get all of your questions answered.  First, when Transactional Data is loaded, BW checks to see if a SID exists for each characterisatic field & value in the load.  If one doesn't, it either creates a SID (Surregate ID) in the master data tables (default action) or the load fails (if the enforece referential intgegrity flag is set).  It's better to load master data first in either case as it will improve the performance of the transactional load.
    In terms of R/3, the data has similar relationships as in BW.  There are master data tables and transactional data tables.  The difference is that while R/3 uses ~1 master data table per field, BW uses more.  Same thing for transactional data.
    As for your enhancement, if everything you need for the derivation of the extra field is in R/3, then you can enhance the extractor in RSA6 and do the mapping in R/3.  Once you replicate the DataSource to BW and reconnect the transformation & update rules, the load should work.  If you can give a bit more information on what sort of enhancement you are attempting, I can give a better example.
    Cheers,
    Adam

  • View Customization Table changes and Data  table base changes in a report

    Hi All,
    How to view Customization Table changes and DAta  table base changes in a report ,
    Is it right transactions: SCU3 or RSVTPROT
    Also plz let me know the concept of audit trial,
    Thanks
    SD

    Hi,
    Changes to master data objects must be captured for the For compliance purposes. The auditor allows you to be able to view and print an audit log of changes to master data objects for a chosen period. It is very common for external auditors to focus on what has changed from one year or quarter to the next to help determine the nature, extent, and population for testing. To configure and access your audit log, perform the actions listed with each of the following utilities.
    Audit Trail is used to track the record changes.
    The report RPUAUD00 gives all the changes done to the masterdata by any user anytime.
    But, before using this audit trial, please ensure that the system hardware is well equipped as the audit trials activation would later become a performance issue as this would occupy a lot of space in the coming time.
    Best Regards,
    Venkat.

Maybe you are looking for