Customization to disable touch mode before installation

Does anyone know what customization is needed to disable Touch Mode in Adobe Reader before installation.

Try following forum:
Enterprise Deployment (Acrobat and Reader)

Similar Messages

Disabling touch mode by default for Reader XI

I am looking to turn off touch mode by default for Reader XI. I tried the customization wizard and there is no settings for touch mode. The registry keys for the settings are in the local user area so I don't think I can apply those for everyone.
Has anyone else looked into this or know a solution?

You can set how Acrobat enters Touch mode, if at all, for touch enabled-devices.
Choose Edit > Preferences (Windows) or Acrobat/Adobe Reader > Preferences (Mac OS).
Under Categories, select General.
In Basic Tools, choose the desired default setting from the Touch Mode menu.

Disable read mode by default during installation

I am currently trying to disable read mode by default as a part of the software installation.
I have searched the msi file using the customization wizard but have not found any part of it that refers to this setting.
Is there a reg key or a setting in the MSI I can change to disable this setting?
Edit:
This is for Reader X

I have been able to figure out the answer, so I'll put it into here in case anyone else wants to do this.
The following registry key has to be added to the msi or mst
HKCU > Software > Adobe > Acrobat Reader > 10.0 > AVGeneral
Dword - bBrowserDisplayInReadMode = 0

My iPod touch 5th g. is stuck on recovery mode, before this i was trying to update it to ios8. I'm trying to connect it to iTunes but its under unspecified and doesn't connect to itunes(asus eee pc) What do i do?

my iPod touch 5th g. is stuck on recovery mode, before this i was trying to update it to iOS8. I'm trying to connect it to iTunes but its under unspecified and doesn't connect to iTunes(Asus Eee pc) What do i do? please help me.

Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try another cable
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar
And as necessary:
See
iOS: Device not recognized in iTunes for Windows
- I would start with
Removing and Reinstalling iTunes, QuickTime, and other software components for Windows XP
or
Removing and reinstalling iTunes and other software components for Windows Vista, Windows 7, or Windows 8
However, after your remove the Apple software components also remove the iCloud Control Panel via Windows Programs and Features app in the Window Control Panel. Then reinstall all the Apple software components
- Then do the other actions of:
iOS: Device not recognized in iTunes for Windows
paying special attention to item #5
- New cable and different USB port
- Run this and see if the results help with determine the cause
iTunes for Windows: Device Sync Tests
Also see:
iPod not recognised by windows iTunes
Troubleshooting issues with iTunes for Windows updates
- Try on another computer to help determine if computer or iPod problem

Feature to disable touch screen when pen is detected is no longer available in windows 7

In N-trig drivers with windows vista there was an option where one could select the option to disable the touch input when pen in near the screen. That feature is no longer available when I installed new n-trig drivers in win7.
I use my tablet a lot to take notes. But with dual mode on it detects input where I rest my palm on the screen to write. Every time I have to go and disable touch input completely before I start writing and enable after I finish.
I there any way to enable auto mode with Windows 7 n-trig drivers?
This question was solved.
View Solution.

Thanks for your reply.
I talked about this with HP tech support and they don't know anything about it. I don't even know whether they are qualified enough to provide support. They were just blaming the problems on Microsoft and N-Trig. I knew the problem is with the drivers and I wanted them to let N-Trig know that people like us are waiting to the Auto feature. But instead of considering my complaint they hung up on me not once but twice.

Acrobat Reader X Disable Protection mode

Hi All,
i need some help with this freaky Acrobat Reader X version.
We have currently ~1000 computers with different old versions of AR (form 6 to 9)
We need to upgrade to 10.0.1 version all PC's
Will use SCCM for distributing the package.
OK... everything here seems good but ... a lot of problems and erros appear.
First we've installed on test group of 10 pc's the AR 10.0.0
all users start complainig that they can't open the pdf's from our file servers.
Solution - bring the patch 10.0.1
After that all users start complaining that they can't print - Windows Error - Acrobat need to be closed !
Solution - Protection mode disabled.
My questions :
1. How can I distribute both the Package of Acrobat and the update together with SCCM
All my tries and reaings failed !!!
i've try different methods and no success
msiexec /i /q \\server\d$\Workstation Baseline\AcrobatReaderX\AcroRead.msi TRANSFORMS="AcroRead.mst" PATCH=\\server\d$\Workstation Baseline\AcrobatReaderX\adbeRdrUpd1001_Tier1.msp
this do not work for me This is in SCCM program
2. How can i disable through Adobe Wizard the Protection Mode ?
I know how to do it manually but is not acceptable this way - i can't communicate with 1000 users to do this manually
I know how to disable it from registry with GPO , but i can't disable it before installation, also i can't disable it on all PC's after installation, because it will take several days to complete for all pc's and this "hole" of some days will stop the work of our end-users.
Any fresh ideia is wellcome. Also any help
Thanks

hey,
had similar issues with protection mode.
found we can do it 2 ways, 1. via registry entry, or 2. via an ADM.
sorry cannot remember the referenced posts for the fixes below...
we use the adm so that users cannot change it, and so that updates dont reset it.
note that the adm has only a few settings, and i dont know the code for any other settings.
1. - REG method:
Windows Registry Editor Version 5.00
[HKEY_LOCAL_MACHINE\SOFTWARE\Policies\Adobe\Acrobat Reader\10.0\FeatureLockDown]
"bProtectedMode"=dword:00000000
REM: Above line Disables Protected Mode on startup
2. - ADM Template method
please note, just copy and paste into a text file and rename as .adm.
remember that on the last section of the code below, change the "YOUR HEADER HERE" bit to what you want to use to find it in the GPO manager once you add the template.
CLASS USER
CATEGORY !!YOUR_COMPANY_NAME_GOES_HEREHeader
CATEGORY "Adobe Reader 10"
CATEGORY "Preferences"
CATEGORY "General"
CATEGORY "Application Startup"
POLICY "Show splash screen"
KEYNAME "Software\Adobe\Acrobat Reader\10.0\Originals"
EXPLAIN !!ExplainNosplash
VALUENAME "bDisplayedSplash"
VALUEON NUMERIC 0
VALUEOFF NUMERIC 1
END POLICY
POLICY "Enable Protected Mode at startup"
KEYNAME "Software\Adobe\Acrobat Reader\10.0\Privileged"
EXPLAIN !!ExplainProtectedMode
VALUENAME "bProtectedMode"
VALUEON NUMERIC 1
VALUEOFF NUMERIC 0
END POLICY
END CATEGORY
END CATEGORY
CATEGORY "Identity"
POLICY "Organization Name"
KEYNAME "Software\Adobe\Acrobat Reader\10.0\Identity"
EXPLAIN !!ExplainOrgName
PART "Organization Name." EDITTEXT
VALUENAME "tCorporation"
END PART
END POLICY
END CATEGORY
CATEGORY "Internet"
CATEGORY "Internet Options"
POLICY "Connection speed"
KEYNAME "Software\Adobe\Acrobat Reader\10.0\AVGeneral"
EXPLAIN !!ExplainConnection
PART "Connection speed." DROPDOWNLIST REQUIRED
VALUENAME "iConnectionSpeed"
ITEMLIST
NAME "56kbps" VALUE NUMERIC 56000
NAME "LAN" VALUE NUMERIC 10000000 DEFAULT
END ITEMLIST
END PART
END POLICY
END CATEGORY
END CATEGORY
CATEGORY "Spelling"
CATEGORY "Dictionaries"
POLICY "Dictionaries"
KEYNAME "Software\Adobe\Acrobat Reader\10.0\Spelling"
EXPLAIN !!ExplainDictionary
PART "Default Dictionary" DROPDOWNLIST
VALUENAME "tDictionaryName"
ITEMLIST
NAME "English (United Kingdom)" VALUE "English (United Kingdom)"
ACTIONLIST
KEYNAME "Software\Adobe\Acrobat Reader\10.0\Spelling"
VALUENAME "iDictionaryDefaultID" VALUE NUMERIC 7
KEYNAME "Software\Adobe\Acrobat Reader\10.0\Spelling\cDictionaryOrder"
VALUENAME "t0" VALUE "English (United Kingdom)"
KEYNAME "Software\Adobe\Acrobat Reader\10.0\Spelling\cDictionaryOrderID"
VALUENAME "i0" VALUE NUMERIC 7
END ACTIONLIST
NAME "English (United States)" VALUE "English (United States)"
ACTIONLIST
KEYNAME "Software\Adobe\Acrobat Reader\10.0\Spelling"
VALUENAME "iDictionaryDefaultID" VALUE NUMERIC 2
KEYNAME "Software\Adobe\Acrobat Reader\10.0\Spelling\cDictionaryOrder"
VALUENAME "t0" VALUE "English (United States)"
KEYNAME "Software\Adobe\Acrobat Reader\10.0\Spelling\cDictionaryOrderID"
VALUENAME "i0" VALUE NUMERIC 2
END ACTIONLIST
END ITEMLIST
END PART
END POLICY
END CATEGORY
END CATEGORY
CATEGORY "Units"
POLICY "Page Units"
KEYNAME "Software\Adobe\Acrobat Reader\10.0\Originals"
EXPLAIN !!ExplainPageUnits
PART "Page unit" DROPDOWNLIST REQUIRED
VALUENAME "iPageUnits"
ITEMLIST
NAME "Points" VALUE NUMERIC 0
NAME "Inches" VALUE NUMERIC 1
NAME "Millimeters" VALUE NUMERIC 2 DEFAULT
NAME "Centimeters" VALUE NUMERIC 3
NAME "Picas" VALUE NUMERIC 4
END ITEMLIST
END PART
END POLICY
END CATEGORY
END CATEGORY
END CATEGORY
CATEGORY "Adobe Acrobat 10"
CATEGORY "Preferences"
CATEGORY "General"
CATEGORY "Application Startup"
POLICY "Show splash screen"
KEYNAME "Software\Adobe\Adobe Acrobat\10.0\Originals"
EXPLAIN !!ExplainNosplash
VALUENAME "bDisplayedSplash"
VALUEON NUMERIC 0
VALUEOFF NUMERIC 1
END POLICY
END CATEGORY
END CATEGORY
CATEGORY "Identity"
POLICY "Organization Name"
KEYNAME "Software\Adobe\Adobe Acrobat\10.0\Identity"
EXPLAIN !!ExplainOrgName
PART "Organization Name." EDITTEXT
VALUENAME "tCorporation"
END PART
END POLICY
END CATEGORY
CATEGORY "Internet"
CATEGORY "Internet Options"
POLICY "Connection speed"
KEYNAME "Software\Adobe\Adobe Acrobat\10.0\AVGeneral"
EXPLAIN !!ExplainConnection
PART "Connection speed." DROPDOWNLIST REQUIRED
VALUENAME "iConnectionSpeed"
ITEMLIST
NAME "56kbps" VALUE NUMERIC 56000
NAME "LAN" VALUE NUMERIC 10000000 DEFAULT
END ITEMLIST
END PART
END POLICY
END CATEGORY
END CATEGORY
CATEGORY "Spelling"
CATEGORY "Dictionaries"
POLICY "Dictionaries"
KEYNAME "Software\Adobe\Adobe Acrobat\10.0\Spelling"
EXPLAIN !!ExplainDictionary
PART "Default Dictionary" DROPDOWNLIST
VALUENAME "tDictionaryName"
ITEMLIST
NAME "English (United Kingdom)" VALUE "English (United Kingdom)"
ACTIONLIST
KEYNAME "Software\Adobe\Adobe Acrobat\10.0\Spelling"
VALUENAME "iDictionaryDefaultID" VALUE NUMERIC 7
KEYNAME "Software\Adobe\Adobe Acrobat\10.0\Spelling\cDictionaryOrder"
VALUENAME "t0" VALUE "English (United Kingdom)"
KEYNAME "Software\Adobe\Adobe Acrobat\10.0\Spelling\cDictionaryOrderID"
VALUENAME "i0" VALUE NUMERIC 7
END ACTIONLIST
NAME "English (United States)" VALUE "English (United States)"
ACTIONLIST
KEYNAME "Software\Adobe\Adobe Acrobat\10.0\Spelling"
VALUENAME "iDictionaryDefaultID" VALUE NUMERIC 2
KEYNAME "Software\Adobe\Adobe Acrobat\10.0\Spelling\cDictionaryOrder"
VALUENAME "t0" VALUE "English (United States)"
KEYNAME "Software\Adobe\Adobe Acrobat\10.0\Spelling\cDictionaryOrderID"
VALUENAME "i0" VALUE NUMERIC 2
END ACTIONLIST
END ITEMLIST
END PART
END POLICY
END CATEGORY
END CATEGORY
CATEGORY "Units"
POLICY "Page Units"
KEYNAME "Software\Adobe\Adobe Acrobat\10.0\Originals"
EXPLAIN !!ExplainPageUnits
PART "Page unit" DROPDOWNLIST REQUIRED
VALUENAME "iPageUnits"
ITEMLIST
NAME "Points" VALUE NUMERIC 0
NAME "Inches" VALUE NUMERIC 1
NAME "Millimeters" VALUE NUMERIC 2 DEFAULT
NAME "Centimeters" VALUE NUMERIC 3
NAME "Picas" VALUE NUMERIC 4
END ITEMLIST
END PART
END POLICY
END CATEGORY
END CATEGORY
END CATEGORY
END CATEGORY
[strings]
YOUR_COMPANY_NAME_GOES_HEREHeader=YOUR HEADER HERE
ExplainNosplash="When disabled, the program will not display a splashscreen on startup.\n\nWhen enabled, the splashscreen will be displayed."
ExplainProtectedMode="When disabled, the program will not run in Protected Mode.\n\nWhen enabled, Protected Mode will run, and may cause compatibility errors.\n\nSee http://kb2.adobe.com/cps/860/cpsid_86063.html for more details."
ExplainOrgName="Enter the organization name by typing it in."
ExplainConnection="To specify LAN, set the connection speed to 10000000."
ExplainPageUnits="Set the page unit from the drop-down list.\n\nThe default is millimeters."
ExplainDictionary="Used to specify the default dictionary to spell checking."

How to disable safe mode on xperia z1,power and volume button doesn't work

How to disable safe mode on xperia z1,power and volume button doesn't work

Hi rafharum,
Welcome to the community! Since you're new please be sure that you have checked out our Discussion guidelines.
A simple restart to the device would generally resolve this issue, however if the power key and Volume key are not working they may very well be causing the handset to execute safemode when ever you power the device on.
If this is the case, you will need to get the handset to a service agent for assessment. Please use the link below to contact Sony Mobile Customer Care directly.
http://support.sonymobile.com/global-en/contactUs/
- Official Sony Xperia Support Staff
If you're new to our forums make sure that you have read our Discussion guidelines.
If you want to get in touch with the local support team for your country please visit our contact page.

How to enable/disable archive mode from the pfile in oracle 10g?

hi
I am using oracle 10g.
Is there any mechanism to / parameter to enable or disable archive log mode?
can I enable arching directly from pfile without touching the startup process??
pls help.
thnx in advance..

Please is not in pfile that you enable/disable archive log mode.
For ENABLE Archivelog mode:
shutdown immediate
startup mount
alter database archivelog;
alter database open;
For DISABLE Archivelog mode:
shutdown immediate
startup mount
alter database noarchivelog;
alter database open;

Adobe Help 4.0.244 - disable update during silent installation

Hello
I am looking for swichtes to disable updates in silent installation mode. I have just discovery that application store file settings in appdata folder and I need to change contentUpdateAvailable=false. But I want to make apply this setting during silent installation..There is any available option?
For now I prepering active setup solution but this is not perfect
thanks for help

You may find more info in the TCS Installation forum

Static disabling Touch Pad & Keyboard

I have an Early 2008 15" MacBook Pro, and I live in a dry climate, and so static discharge is a problem. If it discharges on the track pad it disables the track pad and keyboard.
That does not allow me to save what I was working on, because the only way to restore them is to force quit by the power button.
I have two questions. Is there a way to restore the track pad and keyboard without a restart?
Can someone suggest a device to discharge the static. There is nothing within arms reach to dischaget the static. So far I have been lucky that no permenant damage has happened.

I've used a 3M static discharge pad for over 10 years now, both on my desktop and my wife's. They are not INexpensive, unless you deduct the costs of the damage that does NOT happen or the discomfort that does NOT happen. As I said, these things have been doing their job for a considerable time and show no signs of failure. On a desktop, just put it under your keyboard close enough to the edge of the front so that you automatically touch it before anything on the computer. Basically the same thing with your laptop. These things are easily cut with a strong pair of scissors to just about any shape or size. Just don't cut off and discord (no pun intended) the part that has a wire that you connect to a grounded outlet, usually the screw holding the cover is also grounded on properly installed outlets. It would be wise, of course, to be sure, and correct that first! I bought mine at a local electronics store but they are also available on-line. Just search for "static discharge pad"

I resets my iphone without disabling touch ID lock, it restarts, apple logo appears, and it stays like that, it never starts till now, just the apple logo appears and stays that way, please give a solution???

I resets my iphone without disabling touch ID lock, it restarts, apple logo appears, and it stays like that, it never starts till now, just the apple logo and stays that way, please give a solution???

Hi ahmedsgh,
I'm sorry to hear you are having issues with your iPhone. If it isn't responding or starting up past the Apple logo screen, you may find the troubleshooting steps outlined in the following article helpful, in particular this portion:
If your device gets stuck during startup
When starting up, you might see the Apple logo or a red or blue screen for a long time, or your device might restart again. Try these steps:
Make sure that you have iTunes 12 or later on your computer.
Put your device in recovery mode.
When you get the option to restore or update, select Update. This will reinstall iOS without erasing your data.
If your iPhone, iPad, or iPod touch doesn't respond or doesn't turn on - Apple Support
Regards,
- Brenden

Turn Off Touch Mode for all users

Hello-
I have a terminal services environment and i need to turn off touch mode in Acrobat Reader XI for all users. How can I accomplish this?
TIA

Thanks!
For anyone else looking for this solution:
Install Acrobat on your computer. Open the preferences, general tab and set touch wizard to your desired setting (for me it was never).
Install the Adobe customization wizard(Free download. Just make sur eyou use the same version as the reader you are using).
Launch the adobe customization wizard. FIle open package. Navigate to the install folder and select the .msi file
Once you have the install open go to the registry section and from the local computer copy the HKCU>Software>Adobe>Acrobat Reader>11.0>Touch key into the target computer's registry HKCU>Software>Adobe>Acrobat Reader>11.0 key with the Adobe customization wizard.
Make any other customizations you want.
Save the package.
Now anytime you install from that package all users will get the touch wizard default setting that you set.

Disable Protected Mode Reader 11

All,
I have found articles on Adobe's website about disabling protected mode -
[HKEY_LOCAL_MACHINE\SOFTWARE\Policies\Adobe\Acrobat Reader\11.0\FeatureLockDown]
"bProtectedMode"=dword:00000000
[HKCU\Software\Adobe\Acrobat Reader\11\Priviledged]
"bProtectedMode"=dword:00000000
With both these settings turned on when you start up adobe and view edit > preferences it displays protected mode as being disabled however if I open task manager then open adobe reader I can see 1 instance of AcroRD32.exe - when I then open a PDF file via file > open browser to a PDF file I can see another 2 instances of AcroRD32.exe inside task manager. I thought this behavior was down to PM being enabled as it would spawn multiple instances of this to ensure it runs in sandboxing mode? The problem I have is we use an application inhouse which whitelist's only approved .dll's and .exe's and because Reader continues to spawn multiple instances of Reader even with these registry settings enabled I continue to hit issues getting Reader to work with my whitelist application.
Is there a way that when you open Reader it will only ever open 1 instance of AcroRD32.exe or is the behavior I am seeing by design even with Protected Mode disabled?
Thanks

Solution : Open OSD file and modify the part "Policies"
<POLICIES>
<LOCAL_INTERACTION_ALLOWED>TRUE</LOCAL_INTERACTION_ALLOWED>
<VIRTUAL_FILE_SYSTEM_PASS_THROUGH>TRUE</VIRTUAL_FILE_SYSTEM_PASS_THROUGH>
<VIRTUAL_REGISTRY_PASS_THROUGH>TRUE</VIRTUAL_REGISTRY_PASS_THROUGH>
<ENFORCE_ACLS_ON_VREG_MODIFY>TRUE</ENFORCE_ACLS_ON_VREG_MODIFY>
</POLICIES>

[SOLVED] Disabling N mode: possible? (iwl4965)

Hey guys, I have an Intel 4965 802.11abgn wireless card.
I have been getting download speeds significantly lower than what I expect and what I get with Windows Vista on the same machine.
For example, with the easylist.com Arch mirror I usually get about around 1mbps on other computers. With this one, I get between 60-200kbps.
This happened in Vista as well, but I fixed the problem by disabling N mode in a device manager. I guess our router doesn't support it. So, my question is this: is there a way for me to disable N mode under Linux? It'd be great to get my regular download speeds back. Thanks!
Last edited by wirenik (2008-12-05 01:39:17)

lucke wrote:Try loading the module with "modprobe module_name that_option=1" (rmmod it first). If it works, add "options module_name that_option=1" to /etc/modprobe.conf to make it permament.
I did it!
$ modprobe -r iwlagn
$ modprobe iwlagn 11n_disable=1
Now I get up to nearly 2mbps from easynews, and download speeds everywhere else are soaring too. Thanks a million for the help, everyone!

Status = Safe Mode (improper installation)

Bonjour,
Notre module FP 2010 nous affiche ce message : "Status = Safe Mode (improper installation)". Suite à ce problème, nous avons manuellement effacé tous les fichiers présents dans la mémoire du module, puis configuré l'appareil avec des paramètres réseau valides, puis réinstallé le software dans la mémoire, le tout sans messages d'erreurs, et finallement nous avons toujours ce même message "Status = Safe Mode (improper installation)".
Ma question est la suivante : y a-t-il une âme charitable qui puisse nous aider à supprimer ce message ?
Merci d'avance

hi Paul
i am also encountered the same problem while using FP-2010
one main reason of this problem is due to Firm Ware of FP-2010 so u shld upgrade ur firm ware also chk the following attachments in pdf file u will chk appendix c status led flashes
mazhar
Attachments:
Upgrading FieldPoint Firmwar1.docx ‏69 KB
manual1.pdf ‏1523 KB

Customization to disable touch mode before installation

Similar Messages

Maybe you are looking for