Customization Wizard 9 and Reader 9.2: not saving trusted hosts

I', using "Adobe Customization Wizard 9" and "Adobe Reader 9.2". As part of the Enhanced Security Settings , I want to define two trusted hosts. ie: http://www.whatever.com . The problem is that the Wizard is not saving the trusted hosts that I enter. I generate the MST file and perform a test installation with the .msi calling the .mst file. All the other customizations I have made using the Customization Wizard 9 tool are there EXCEPT the settings I designated for the trusted hosts. The entries are blank.
Is this a known bug with the Customization Wizard 9 or am I doing something wrong?
TIA !

I came across your post because I am looking for an answer to the same corruption. Installation completes, but installed configuration does not match my settings. I have similar but separate packages hosted on 2 different servers from which I pushed installation to 2 different LANs. All evidence so far is that all installations are corrupt, all of which defeats the purpose of using the Adobe Customization Wizard.
I suspect I will have to revisit all systems.
I have no answers to offer, but will monitor this site in case you do get good advice to fix.

Similar Messages

Adobe Customization Wizard 9 and acrobat reader

Im trying to customise the acrobat reader with the Customization Wizard 9 and even if set some option like disable the check for update even after deploying the msi the option still there i also try to disable the EULA when you first start the program neither ..... still apear the first time i start acrobat reader
Thanks

As you are installing Adobe Reader 9 over Acrobat 8 then you need not worry about checking those greyed out options.
When you will install Adobe Reader 9, the Reder setup will not uninstall any previous Acrobat 8 version on it own.
So, you can go ahead and install Reader without worrying about these options. The Reader setup will only prompt during installation that whether to make Reader or Acrobat 8 the default viewer of PDF files.
These options have only been provided for the situation when, say, Acrobat 9 is being installed over Acrobat 8, then it gives the user an option to choose whether to remove previous version of Acrobat or not. Because newer Acrobat versions remove previous Acrobat versions before installation, which is not possible with the Reader setup.
That said, please note that it is not recommended to use Reader and Acrobat on the same machine, Adobe doesn't recommend this.

Adobe Customization Wizard X with Reader 10.1.3

Hi all,
First time trying to use the Adobe Customization Wizard X and i wanted to install version 10.1.3 but everytime i use the wizard it always sets it to version 10.1.0.
any ideas?
thanks

Hi!
Same here. Im using wizard X to create a deployable msi of Adobe Reader 10.1.3 but its not working. Everytime i open the msi the wizard transforms it into a 10.1.0 package.
I tryed with 10.1.2 and 10.1.3. It always results in a 10.1.0 installation.
Update: After extracting the setup.exe the resulting msi is definatly a 10.1.0. How could that be? So the wizard is not the problem.
I hate it. It takes me a whole day to read annyoing tutorials of how to make a adobe reader deployment work. I´m sorry Nikhil but your answer is not helpful. Please tell us what is exactly to do?
p.s. i dont understand why there is no msi file+wizard+tutorial in your download area? I was searching about 4 hours in different sources until i finally understood that i have to download the .exe from your hidden ftp, then run it with -nos_ne parameters to get msi, stored somewhere stupid in c:\programData\adobe\setup\blablablabla, download wizard, configure the msi getting a mst, put this and that on a share, set grouppolicy and and and and and.... ******* which admin has time for stuff like that? HELLO?! Its only an adobe reader deployment not a spaceshuttle! Im tired now and have to go to rehab for 1 week. Thank you.

I was downloading music on my iPod. A message came and read " You do not have enough storage..go to settings.." Question: How do you add storage?? Where do I go on my iPod to add the storage?? Help!! JFK

I was downloading muis on my iPod. A message came up and read " You do not have enough storage..go to settings.." Question: How do I add storage? Where do I go on my iPod to add the storage?? Help!!
JFK

You can't add storage to the iPod. Yo can go to Settings>General>Usage and see what is taking up a lot of storage so yoknw what to delete.
Also maybe:
Connect the iPod to your computer and look at the storage used by the various categories as shown in the colored bargarph in iTunes.
Come back with the results.
An "other" larger than about 1 1/2 GB indicates corrupted files.
What is the Other on my iPhone and How to Remove It
What is "Other" and What Can I Do About It?
Next, usually restoring from backup eliminated the corrupted files. However, sometimes restoring to factory settings/new iPod is required.
To restore from backup see:
iOS: How to back up
To restore to factory settings/new iPod see:
iTunes: Restoring iOS software

Keynote (and other iWork apps) not saving properly!

Hi all
I have had some strange problems over the last few weeks where I get messages telling me that iWork (usually Numbers) cannot save the files as 'something else' is using the file. So I click 'save anyway' and I get strange files in folders, ie folder and file name is the original name plus some gooblygook.
I have got round this by deleting the 'extras' and carrying on. But now I am preparing a major presentation in Keynote and suddenly it is not saving graphics some of the time!
For example I was working on a slide - and suddenly got a message that 'some problems occured' -
Couldn’t save image. - image.png (Slides: 12, 13, 17, 18; Skipped slide count: 1)
Couldn’t save image. - image.png (Slides: 12, 13, 17, 18; Skipped slide count: 1)
I have been working with this presentation for some time and have never encountered any problems - passing between my laptop and my iPad to review and modify (mainly viewing on the iPad and editing on the MacBook).
Any ideas what is happening? I have a major presentation to give in just over a week and I don't want to use PowerPoint!
Thanks
Ian

I've been having some success NOT using any files that have previous images or audio in them, starting from a base template and then adding audio and video and photos that are already on my hard drive, not previous Keynote files. Today I needed five slides that were part of another deck and, you guessed it, they were corrupted (or missing) when I reopened the file, only the thumbnails remaining.
I closed the original Keynote file, placed a zip extension, then control- clicked to see the contents. The images were missing from the package. I then replaced the extension with .key and reopened in Keynote. The audio file had been there but not the images or the drawing, which I then searched for.
Yes, delete the weird file backups and make a backup of the original in the finder. Then lock it! (You're using Mountain Lion?)
I have a huge presentation tomorrow. I have five backups, including on a thumb drive.
How much longer Apple?

Oops... a server error occurred and your email was not saved.

after completion of mail content when try to send the message error shows as
"Oops... a server error occurred and your email was not saved."
This problems are being experienced very often since installation of Firefox version 5.0

Reload web page(s) and bypass the cache.
* Press and hold Shift and left-click the Reload button.
* Press "Ctrl + F5" or press "Ctrl + Shift + R" (Windows,Linux)
* Press "Cmd + Shift + R" (MAC)

Clock and date settings are not saved

clock and date settings are not saved in lion

I'd give AppleCare a call.
AppleCare Support Phone Number: 1-800-275-2273
open 6am to 6pm Pacific Time
International Technical Support Numbers
http://www.apple.com/support/contact/phone_contacts.html
You may want to look under date & time and set the clock from the internet. At least you will have the correct time after a while.
RObert

Missed calls and placed calls are not saving in 7942 phone

HI
i am facing some issue in telephone directory, in my phone missed calls and placed calls are not saving. i am using cisco call manager and 7942 phone. please help me in this issue.
Thanks
Shijo

Hi Shijo,
Is this affecting only one 7942 IP phone or all of them? if this is affecting all then you may try ta firmware upgrade. If this is only affecting one of them then you can compare the settings of this phone with the working ones or try setting the phone to factory defaults.
HTH
Manish

Adobe Customization Wizard XI with Reader XI-not all options are available

I'm using the Adobe Reader XI redistributable (yes, I got the license and special download, etc.)
I've followed the Enterprise administration kit which makes me extract and build an AIP. All is well
What I notice is that the Customization Wizard has some options grayed out.
For example, the DOCS for the customization wizard say that I can fill out username, organization, etc.
But those are grayed out.
Also, I cannot select the Installation Options -> Remove previous version of Acrobat (it's grayed out). I can only select the Remove all versions of Reader.
Any idea why this is?
I point it to the AIP reader .MSI File when i built the customization kit.

You should post this on the Enterprise Deployment forum but the username, organization, etc... are for Acrobat only. The ability to uninstall Acrobat is for Acrobat only. It would be a bad thing for Reader to uninstall a more capable product like Acrobat Standard or Acrobat Pro no matter what the version.

Where do I find the Customization Wizard for Adobe Reader XI?

I went to this page:
http://www.adobe.com/devnet-docs/acrobatetk/index.html
In there, the Tune an installer prior to deployment section mentions the Customization Wizard, but the link points to ftp://ftp.adobe.com/pub/adobe/acrobat/win/11.x/11.0.0/misc/, where there is only the ADM templates.
When will this be available?

Mac of Win?
For Mac, please try this: ftp://ftp.adobe.com/pub/adobe/acrobat/mac/11.x/11.0.00/misc/
The Win version is not ready yet. We expect to have it ready in early November.
Regards,
Gladys Liu

Location Service in security and privacy preference pane not saved

Hi,
When I want to activate the location service inside the security and privacy preference pane, it is not save. I can check the box but if I leave the pref pane, and come back, it is still uncheck.
I notice that when I wanted to activate the icloud feature: localized my mac. Thus, it's not working due to my pref in privacy pane not saved.
I notice as well that in safari, there is a location option as well, and I can't activate it, like iCloud feature due to my pref in privacy always unchecked.
I tried to repair the authorization of my disk a couple of times
Is someone experiencing the same issue ?

The terms of service of the Apple Support Communities prevent us (Apple users) from speculating about why Apple does or does not take certain actions.
I can't tell you why it is the way it is. But I can say you could go a long way to alleviating your concern by going to System Preferences > Energy Saver and changing the sleep time such that your computer goes to sleep nearly immediately after you stop using it. Then even if you forget to log off, your computer will very quickly go to sleep and require a password.

I recently got a new iPad and when synching it to my laptop I accidently clicked to replace all of my new information with the old. I had iCloud on the new one and there were many notes saved in it. How can I get them back?

Everthing was replaced including the information under iCloud under settings. My iPad now states that I do not have my iCloud account set up on my iPad as on the old one I did not.

Go to Settings>iCloud and set up the iCloud account you were using before by singing in with the same Apple ID. Then turn the data you were syncing with your iCloud account back to On, and if prompted, choose merge.

Certificate Name and Expirty Date is not saved in Certificate Manager

The following scenario is happening for few cases:
* Firefox shows "Add Exception" for the certificate
* The certificate is added as permanent exception.
* Go to Firefox -> Tools -> Options -> Advanced -> View Certificates
* Go to Servers Tab
* The certificates which I had stored, doesn't show the certificate name and expiry date. For certificate name it shows <Not Stored>, and for expiry date it is empty.
* Also, when I select it, Export, View is all disabled. Only "Import", "Delete" and "Add Exception" is enabled.
* If I click on "Add exception" again, it says it is verified as it is already there in database.
* However, if I add it as "Temporary", then everything "Name, Expiry Date" is saved.
Is it a known issue in Firefox or am I Missing something. Please confirm and let me know.

Hi,
Go to T Code :-SM31
table J_1IEWT_ECFLAG -
check " X" against your Company code.
hope this will help
SU*

External Adobe Reader for pdf, not saved in settings

I'm using Firefox v32.0.2 (with Adobe Acrobat 11.0.9.29 Plug-in) on Windows 7 Enterprise SP1.
Using the Adobe plugin for very large pdf files results in a stalling browser, sometimes for minutes.
Switching over to the external Adobe Reader in the mimetype settings works ok, but only for the current session.
After restarting the browser, the setting for pdf files is back to the Adobe plugin.
Indeed, setting "Preview in Firefox","Always ask","Save file" is stored in mimetypes.rdf,
but setting the external Adobe read is NOT.
By now my workaround consists of deactivating the Adobe Plugin; then pdf files are always opened with the external Reader.
But i would like to know how comes that setting external apps to read pdf files is NOT stored in the settings and therefore lost when restarting firefox.
Anybody know why that is ? bug or feature ?
Regards,
Gaston

Hello,
In order to change the default reader for PDF files (to not open PDF files with Firefox's internal PDF reader), follow these steps:
#Click the menu button [[Image:New Fx Menu]] and click Options (for Linux and Mac Preferences) button.
#In the Options (for Linux and Mac Preferences) window, select the ''Applications'' tab.
#In the ''Search'' field, type ''PDF''. You should find ''Portable Document Format (PDF)''.
#On the right hand side you should find an ''Action'' column. Use that to select your favorite PDF reader. In order to view PDF files in Firefox, choose ''Preview in Firefox''.
Did this fix your problems? Please report back to us!
Thank you.

I'm trying to correct a mistake in my signature block. I save it but when I go back and look, it's not saved. Help!

I made a spelling error in my signature block. I corrected this and hit save. When I got out and went back in, it wasn't saved. How do I fix this?
== This happened ==
Every time Firefox opened
== June 7, 2010

I copied a "pretty font, then I pasted it on to my signature block (since i can not get a pretty font from my signature block). But when I hit "SAVE", the signal said " Saving error.." and it would not save what I just pasted on!!! please help.

Customization Wizard 9 and Reader 9.2: not saving trusted hosts

Similar Messages

Maybe you are looking for