Customize Basic Search iView with some text above the Search field

Hello *,
we are using the sap.km.cm.basicsearch iView for searching some things. Is it possible to write some text for description above the search field inside the iview?
Regards,
Björn,

Hi Adam,
    U can add a description to the search field in the search iView by customizing the sap.km.cm.basicsearch iView.Download the PAR file from the server machine or from System Administration>support>Portal Runtime>Browse Deployment>Save the PAR file in local machine and import the same to NWDS and customize according to ur requirement.
Hope this Helps.
Regards,
Vinoth.M

Similar Messages

  • I have a macbook pro with OSX 10.9.3 and Safari 7.0.4. How do I remove BING FROM SEARCHING when i type something into the search bar

    I have a macbook pro with OSX 10.9.3 and Safari 7.0.4. How do I remove BING FROM SEARCHING when i type something into the search bar

    See below if the search engine setting was changed without your knowledge and you can't change it back.
    You installed the "Genieo/InstallMac" rootkit. The product is a fraud, and the developer knowingly distributes an uninstaller that doesn't work. I suggest the tedious procedure below to disable Genieo. This procedure may leave a few small files behind, but it will permanently deactivate the rootkit (as long as you never reinstall it.)
    Malware is constantly changing to get around the defenses against it. The instructions in this comment are valid as of now, as far as I know. They won't necessarily be valid in the future. Anyone finding this comment a few days or more after it was posted should look for more recent discussions or start a new one.
    Back up all data. You must know how to restore from a backup even if the system becomes unbootable. If you don't know how to do that, or if you don't have any backups, stop here and ask for guidance.
    Step 1
    In the Applications folder, there may (or may not) be an application named "Genieo". Genieo may be partially installed even if this item is absent. If it's present, select it and open the Finder Info window. If it shows that theVersion is less than 2.0, download and install the current version from the genieo.com website. This may seem paradoxical, since the goal is to remove it, but you'll be saving yourself some trouble as well as the risk of putting the system in an unusable state.
    There should be another application in the same folder named "Uninstall Genieo". After updating Genieo, if necessary, launch "Uninstall Genieo" and follow the prompts to remove the "newspaper-style home page." Restart the computer.
    This step does not completely inactivate Genieo.
    Step 2
    Don't take this step unless you completed Step 1, including the restart, without any error messages. If you didn't find the Genieo application, or if you couldn't complete Step 1 for any reason, stop here and ask for instructions.
    Triple-click anywhere in the line below on this page to select it:
    /Library/Frameworks/GenieoExtra.framework
    Right-click or control-click the line and select
    Services ▹ Reveal in Finder (or just Reveal)
    from the contextual menu.
    If you don't see the contextual menu item, copy the selected text to the Clipboard by pressing the key combination command-C. In the Finder, select
    Go ▹ Go to Folder...
    from the menu bar and paste into the box that opens by pressing command-V. You won't see what you pasted because a line break is included. Press return.
    A folder should open with an item named "GenieoExtra.framework" selected. Move that item to the Trash. You'll be prompted for your administrator password.
    Move each of these items to the Trash in the same way:
    /Library/LaunchAgents/com.genieo.completer.update.plist
    /Library/LaunchAgents/com.genieo.engine.plist
    /Library/LaunchAgents/com.genieoinnovation.macextension.plist
    /Library/LaunchDaemons/com.genieoinnovation.macextension.client.plist
    /Library/PrivilegedHelperTools/com.genieoinnovation.macextension.client
    /usr/lib/libgenkit.dylib/usr/lib/libgenkitsa.dylib
    /usr/lib/libimckit.dylib
    /usr/lib/libimckitsa.dylib~/Library/Application Support/com.genieoinnovation.Installer~/Library/LaunchAgents/com.genieo.completer.download.plist
    ~/Library/LaunchAgents/com.genieo.completer.update.plist
    If there are other items with a name that includes "Genieo" or "genieo" alongside any of those listed above, move them as well. There's no need to restart after each one. Some of these items will be absent, in which case you'll get a message that the file can't be found. Skip that item and go on to the next one.
    Restart and empty the Trash. Don't try to empty the Trash until you have restarted.
    Step 3
    From the Safari menu bar, select
    Safari ▹ Preferences... ▹ Extensions
    Uninstall any extensions you don't know you need, including ones called "Genieo" or "Omnibar," and any that have the word "Spigot" or "InstallMac" in the description. If in doubt, uninstall all extensions. Do the equivalent for the Firefox and Chrome browsers, if you use either of those.
    Your web browser(s) should now be working, and you should be able to reset the home page and search engine. If not, stop here and post your results.
    Make sure you don't repeat the mistake that led you to install this software. Chances are you got it from an Internet cesspit such as "Softonic" or "CNET Download." Never visit either of those sites again. You might also have downloaded it from an ad in a page on some other site. The ad has a large green button labeled "Download" or "Download Now" in white letters. The button is designed to confuse people who intend to download something else on the same page. If youever download a file that isn't obviously what you expected, delete it immediately.
    You may be wondering why you didn't get a warning from Gatekeeper about installing software from an unknown developer, as you should have. The reason is that the Genieo developer has a codesigning certificate issued by Apple, which causes Gatekeeper to give the installer a pass. Apple could revoke the certificate, but as of this writing, has not done so, even though it's aware of the problem. This failure of oversight is inexcusable and has compromised both Gatekeeper and the Developer ID program. You can't rely on Gatekeeper alone to protect you from harmful software.
    Finally, be forewarned that when Genieo is mentioned on this site, the perpetrator of the scam sometimes shows up under the name "Genieo support." He will tell you to run the provided uninstaller. As he knows and intends, the uninstaller does not completely remove the malware.

  • How do I get my Tabs above the Search Bar?

    Using Firefox 36.0.4 on Windows 8.1. I know there used to be a way to get my Tabs above the Search Bar, but for the life of me, I can't find it, LOL. Can anyone give me a clue, please, and thank you! Also, can we not get the Firefox button anymore instead of the "File, Edit, View," etc. at the top of the browser? I'm having a hard time changing that, too. Again, thanks for your replies.

    The Tab bar should be at the top by default in current releases.
    If that isn't the case then you likely have an extension or [http://kb.mozillazine.org/Editing_configuration code in userChrome.css] to achieve this.
    *https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes
    In current Firefox releases (29 and later) the orange Firefox menu button has been replaced by the three-bar Firefox Menu button at the far right end of the Navigation Toolbar and this button is always visible whether the Menu Bar is visible or hidden.
    *There is a star like button next to the search bar on the Navigation Toolbar to bookmark the current web page and a "Show your bookmarks" button next to it to open the Bookmarks in a drop down menu.
    *You can find "Show All Bookmarks" to open the Bookmarks Manager (Library) at near the top of the drop-down list.
    *If you bookmark a page then "Bookmark This Page" in the Bookmarks menu as well as the tooltip of the star changes to "Edit This Bookmark".
    *You can toggle the title bar on/off via the "Title Bar" button at the bottom left in the Customize palette window.
    You can toggle the Menu Bar on/off via the right-click context menu of a toolbar to have menus like the File menu with Print (Ctrl+P) and Print Preview and the Bookmarks and History and Tools menus.

  • Search doesn't include text in calendar notes fields

    I have a calendar created in iCal that includes about 90 entries with text in the notes field of each. Spotlight on the Mac searches that text fine.
    I've synched that calendar to my iPhone - and search there doesn't include text in that field, though it does for the title field.
    Its a great feature - but to keep calendar entries usable the titles need to be short with most details in the notes, but still searchable

    http://www.apple.com/feedback/iphone.html

  • Snow Leopard version of Preview:  Enable lines of text in the search results?

    In Preview 4 on OS X 10.5.8 Leopard and Preview 3 on OS X 10.4.11 Tiger, when a search of a PDF file was conducted, the search term would appear in context in the drawer on the side of the main Preview window.  The multiple lines of text in the search results could then be quickly scanned visually.
    In Preview 5 on OS X 10.6.8 Snow Leopard, the search result display options do not seem to include the lines of text found in Preview 4 and Preview 3.  Is there a setting somewhere, maybe even performed via the command line in the Terminal application, that can enable Preview 5 to display such lines of text in the search results?

    It's either that or finding other software for your scanning needs. For example, Image Capture comes with OS X, VueScan 9.2.09, ExactScan Pro 2.24.
    Alternatively, partition your hard drive and install Snow Leopard on another volume.
    To resize the drive do the following:
    1. Open Disk Utility and select the drive entry (mfgr.'s ID and size) from the left side list.
    2. Click on the Partition tab in the DU main window. You should see the graphical sizing window showing the existing partitions. A portion may appear as a blue rectangle representing the used space on a partition.
    3. In the lower right corner of the sizing rectangle for each partition is a resizing gadget. Select it with the mouse and move the bottom of the rectangle upwards until you have reduced the existing partition enough to create the desired new volume's size. The space below the resized partition will appear gray. Click on the Apply button and wait until the process has completed.  (Note: You can only make a partition smaller in order to create new free space.)
    4. Click on the [+] button below the sizing window to add a new partition in the gray space you freed up. Give the new volume a name, if you wish, then click on the Apply button. Wait until the process has completed.
    You should now have a new volume on the drive. Use the Snow Leopard installer DVD to install Snow Leopard on your new volume.
    It would be wise to have a backup of your current system as resizing is not necessarily free of risk for data loss.  Your drive must have sufficient contiguous free space for this process to work.

  • Diplaying some text when the formula value is negative

    Hi all,
    I am calculating the date difference using the formula  diff= date1- date2.
    My requirement is when the diff is negative it has to displayed as # or with some text but not as zero .
    Regards

    You can display some random number say 999999 instead of # or text.Is that feasible ?
    As # and text cannot be used for key figures.
    You can create a formula like :
    ( diff < 0 ) * 99999 + (diff >= 0 ) * diff
    Hope this helps.

  • Epson: No Duplex Scan with some apps form the mac store

    Hallo everyone,
    I have an problem with my epson scanner and some apps from the App Store.
    My Epson Workforce 3540 can duplex scanning. With Image Capture this works. But with some apps from the appstore, witch uses self-scanning dialogs, and not the image capture dialog, it do not work. I can select duplex scan, the printer scans the first side, change the papger site, and scan the other side, but the application gets only the first side.
    I tested one other printer and this worked.
    I contact the developer, the said: We use standard apis from apple (ICDeviceBrowser, ICScannerDevice) and their is noch way make a failure. Then I contact Epson and they told me: Contact Apple!
    Is this problem new? It must be a driver problem, or? Help!
    Thanks,
    Nils

    Hallo everyone,
    I have an problem with my epson scanner and some apps from the App Store.
    My Epson Workforce 3540 can duplex scanning. With Image Capture this works. But with some apps from the appstore, witch uses self-scanning dialogs, and not the image capture dialog, it do not work. I can select duplex scan, the printer scans the first side, change the papger site, and scan the other side, but the application gets only the first side.
    I tested one other printer and this worked.
    I contact the developer, the said: We use standard apis from apple (ICDeviceBrowser, ICScannerDevice) and their is noch way make a failure. Then I contact Epson and they told me: Contact Apple!
    Is this problem new? It must be a driver problem, or? Help!
    Thanks,
    Nils

  • I have problem with some gosts on the side of the display !?

    I have problem with some gosts on the side of the display !? and I want to make a back up of my mac and to take it to the store for the problem I gut !

    Hello, it sounds a bit like this common problem, do get it fixed...
    https://discussions.apple.com/thread/2300580?start=0&tstart=0

  • Need a Tcode Similar to CJR2 with some restrctions in the selection scr

    Hello Experts,
    I need a Tcode which is Similar to CJR2 but with some restrictions in the selection screen.
    CAN ANYONE THROW A LIGHT HOW TO ACHIVE THIS.
    Thanks a lot in advance.
    Regards,
    Vasanth M

    Hello Experts,
    I have tried with the Transaction Variant. It works but I want to make display only for the version,Starting and closing period and Year. Other fields should be open for input(Cost Element and WBS element)
    But the transaction variant is making DISPLAY ONLY for all the fields.
    Please tell me a suggestion how I could achieve it.
    Thanks a lot in advance.
    Best Regards,
    Vasanth M

  • Need a Tcode Similar to CJR2 with some restrictions in the selection scr

    Hello Experts,
    I need a Tcode which is Similar to CJR2 but with some restrictions in the selection screen.
    CAN ANYONE THROW A LIGHT HOW TO ACHIVE THIS.
    Thanks a lot in advance.
    Regards,
    Vasanth M

    Hello Experts,
    I have tried with the Transaction Variant. It works but I want to make display only for the version,Starting and closing period and Year. Other fields should be open for input(Cost Element and WBS element)
    But the transaction variant is making DISPLAY ONLY for all the fields.
    Please tell me a suggestion how I could achieve it.
    Thanks a lot in advance.
    Best Regards,
    Vasanth M

  • Scribble some text on the image

    i am developing one application in applet.for my application i need to scribble some text on the image.the scribble text must displayed on the image when ever i open the image

    We do not support this functionality. I suspect you are talking about watermarking?
    I would suggest you send a message to [email protected] , the product manager for interMedia and describe your application. This would be helpful in defining future requirements. He may also know of partners that can supply this technology.
    You can add text to an image using JAI or some other packages before the image goes into the database, or when it goes out.
    Larry

  • Append hyphen automatically after the wrapping of text in the dimension field

    Post Author: Nita_here
    CA Forum: WebIntelligence Reporting
    I want to Append hyphen automatically after the wrapping of text in the dimension field.
    e.g the text reads "I want to wrap this text". then if cell width exceeds after "I want to wrap" then it should be displayed like this "I want to wrap-" "this text".
    Thanks in advance,
    Nita

    Post Author: Nita_here
    CA Forum: WebIntelligence Reporting
    Thanks for your input.
    Let me tell you what I have understood. I will create a variable having the formula (which i have earlier written) in universe. Whenever i need to use the formula in infoview, I will call the variable instead. That's fine. But again, I will have the same problem. If I do any change in infoview level, the cell width is bound to change as it is not the free standing cell, its a column among othe one. e.g.
    A  B  C
    1  2  3
    4  5  6
    (you can think B as the column). Any change(addition, deletion of columns) will certainly change the cell width of B. So, again I need to calculate the things, which i dont want.
    Nita_here: I manually calculated that after 12 characters, the cell wraps the text.
    I wonder if there would be a way to do the things dynamically.
    Thanks in advance,
    Nita

  • Changing color of  text in the input field

    hi
    when i disable the input field , the text written in it has very light color. How can i change the color of the displayed text in the input field.

    Hi Harsimran,
    changing the text color of an input field is not possible. However, you can build a workaround:
    1. take an expression box, place it exactly over your input field
    2. change its text color and take the value of your input field as value being displayed
    3. instead of making your input field disabled, make it hidden and show the expression box instead.
    Thus, instead of enabling/disabling your input field, switch between expression box/input field to be displayed. I hope it's clear what I mean. If not, don't hesitate to ask again.
    Best regards,
      Benni

  • I just published my Muse site on Adobe, and now when i do a search and get a return on the search, it repeats the site name several times. is it in the page properties?

    I just published my Muse site on Adobe, and now when i do a search and get a return on the search, it repeats the site name several times. is it in the page properties?

    By search you are referring to Google search ?? or you are using any search module in your site and the keywords shows same topic multiple times on page ?
    Please elaborate more, provide site url.
    Regarding using keywords, description etc, you can add that to your page using page properties > metadata section.
    http://muse.adobe.com/strategies-for-seo.html
    Thanks,
    Sanjit

  • Input Text with LOV in table, the search list will be limited with 25 row?

    Hi, experts
    I got a strange problem with JDev 11.1.1.5.0, I created Input Text with LOV in Data View for one attribute with default setting, the LOV worked fine when I drop the DC with 'ADF form'; but when I drop it with ADF Table, the search function will just show 25 rows, I can see it try to fetch data when scroll down just like form, but then nothing happened, only the first 25 rows will be show without any error log.
    Any special configuration needed for LOV in table? or a bug in LOV?
    many thanks.

    You can change the range size on the VO which you use for the LOV. If you only want to change it for the VO the lov uses, select the VO in question in the application module data model and clic edit. There you enter -1 fro raneg size.
    If you want to change it globaly for this VO you open the VO and select the Tuning section and check 'all at once' which should get you all rows. Be careful that the VO don't return too much rows. A LOV wiht more then 50 rows is too big. In this case you may choose an other component.
    Timo

Maybe you are looking for