Customize Line Items Details Loading for Multiload TEXT-Based

Hi all,
has anybody customized HFM adapter to enable line item details loading for Text-based multiload files?
Is it possible?
Thanks

But then we wouldn't have one text multiload file but several text files that will be converted into several .dat files to be loaded into HFM.
Our current problem is that we have a multiload text file (we can convert from the Multiload Excel) but this file contains line item details. We want to keep the performance of loading only one .Dat file, but also load line item details.
What about if the user split the multiload files into two:
* Excel Multiload just with Line Item accounts (there are not so much)
* Text Multiload for standard accounts
This would be a nice solution as well? If they are happy....
Thanks

Similar Messages

  • Exit / badi for individual service line item detail with internal orders.

    Hello guys,
    <b>Issue 1.</b>as per our scenario we want to get the individual service line item details with Internal Orders.
    Please provide me any exit/badi with each item level with individual service line item Internal Orders.
    <b>Issue 2:</b> Remain same for issue 3 for blocking status. We want to delete item level for particular line what about the service rows which assigned in particular item.
    point will be rewarded for the suitabel answers.
    please give me response  ASAP.
    With Regards
    yogesh

    Hey Yogesh,
    I have the same scenario... Could you please drop a mail to [email protected] with the details of BADI and other details that you implemted for the same.
    Thanks a lot in advance.

  • Header Details to be Printed only for the line item details.

    Hi All,
    I have the following requirement.
    I have Page1 with the Logo, Header Window, Vendor Window, Send Invoice To, Delivere Invoice To and Main Window. Main Window Starts from the middle of the page. In the Page2 i have Logo, Header window and Main Window. In the Page3 i have only Main Window.
    In the Footer of the Main Window i have Placed the Terms and conditions which should always be Printed in the New Page. So in the footer i have given a command "Go to New Page " and given the page as Page3.
    The requirement is Logo,and Header Window should appear only for the Line items and not for the Terms and conditions.
    For the Page1 i have given the Next Page as Page2. Suppose if there is only one line item then it Prints in the first Page itslef and the control flows to the Page2 and since in the page2 i have given the condition for the Logo and header window to print only if line item is more than 1 and since Main Window is starting from the middle there is a blank Space appearing in the start of the page.
    The command i have given in the footer to trigger new page that is page3 is not getting triggered. If there are more than one line item then its printing the logo and header window and so there is no blank space appearing and it is working fine.
    Please let me know how to avoid this blank space and move my main window to the start of the Page if there is only one line item.
    Thank you.

    Dear Vasudha,
    I am a little bit confused regarding your query,
    "In the Footer of the Main Window i have Placed the Terms and conditions which should always be Printed in the New Page. So in the footer i have given a command "Go to New Page " and given the page as Page3. "
    When you say footer of main window does it mean , that you are using a table inside your main window and the command node your have inserted is in the footer of the table ?.I hope it is, because my suggestion is based on this assumption.
    Well my suggestion for your issue is,
    1.I  hope you are aware we can trigger a next page in two ways, one by setting the next page static attribute & second using  the command node which you have used.In your case you will have to use a combination of both.
    2.I feel your First page design is ok. Set its static next page attribute to PAGE2. Similarly set the static next page attribute for PAGE2 as PAGE2 itself. This should take care of your table which you have placed in the main window. If the table contains only one lineitem it will get over in the first page itself. If the lineitems are more in the table, it will automatically triggerPAGE2 (since static next page attribute for PAGE1 is PAGE2)  and the remaining line items will be displayed. Now no matter how many lineitems you have ,PAGE2 will be triggered repeatedly(since static next page for PAGE2 is PAGE2 itself) until the entire data in your table is displayed.
    In this way your requirement of printing the logo and header windows for the data lineitems only will be fulfilled.
    3.Now the last catch in your case is the printing of PAGE3(The terms and condition page) on an entirely new blank page.
       In the footer section of the table which you have used,  use a command node set to PAGE3.  After the command node and under the same  footer section now insert your terms and condition lineitem.
    Also Check the "at End of table" checkbox and uncheck " AT PAGE BREAK" under OUTPUT OPTIONS tab for the footer section.
    So now this footer section will be triggered only once after all the data in the table is displayed
    4. So now if there is only one lineitem, before the default second page is triggered the command node will trigger the PAGE3 and the terms and condition will be displayed.Else if there are more lineitems the page2 will be triggered again and again and finally when all the lineitems are over, the footer of the table will get triggered. So the command node will take you to the PAGE3 wherin the terms and condition will only be displayed.
    Hope this helps.
    Regards,
    Riju

  • PO line item details from BAPI_PO_GETDETAIL1 and append to BAPI_PO_CHANGE

    Hi,
    The requirement is to get PO line item details from BAPI_PO_GETDETAIL1 and save it in the internal table and append that internal table into  the BAPI_PO_CHANGE.
    But i am getting dump in this program.
    TABLES: ekpo.
    DATA: BEGIN OF po_details.
            INCLUDE STRUCTURE BAPIMEPOITEM. "Include the structure of Dictionary Reference.
    DATA: END OF po_details.
    DATA: BEGIN OF po_details1.
            INCLUDE STRUCTURE BAPIMEPOITEM. "Include the structure of Dictionary Reference.
    data: END OF po_details1.
    DATA: it_po_details LIKE STANDARD TABLE OF po_details,
    wa_po_details like line of it_po_details.
    data: it_po_details1 like standard table of po_details,
    wa_po_details1 like line of it_po_details1.
    PARAMETERS: p_ebeln LIKE ekpo-ebeln DEFAULT '4500000016'.
    CALL FUNCTION 'BAPI_PO_GETDETAIL1'
      EXPORTING
        PURCHASEORDER = p_ebeln
      TABLES
        POITEM        = it_po_details.
    loop at it_po_details into po_details.
      read table it_po_details into wa_po_details with key PO_item = p_ebeln.
      move-corresponding po_details to po_details1.
      CALL FUNCTION 'BAPI_PO_CHANGE'
        EXPORTING
          PURCHASEORDER = p_ebeln
        TABLES
          POITEM        = it_po_details.
      append po_details to it_po_details1.
      LOOP AT it_po_details1 INTO wa_po_details1.
        WRITE:/ wa_po_details1-PO_item,
           wa_po_details1-MATERIAL,
           wa_po_details1-SHORT_TEXT,
           wa_po_details1-PLANT.
      ENDLOOP.
    endloop.

    HI,
    1st you check for the following following  authorization objects are checked:                                                                               
    M_BEST_BSA (document type in PO)                                                                               
    M_BEST_EKG (purchasing group in PO)                                                                               
    M_BEST_EKO (purchasing organization in PO)                                                                               
    M_BEST_WRK (plant in PO)          
    and to change the PO below is the eg for changing the short text:-
    TABLES: ekpo.
    DATA: BEGIN OF po_details.
            INCLUDE STRUCTURE bapimepoitem. "Include the structure of Dictionary Reference.
    DATA: END OF po_details.
    DATA: BEGIN OF po_details1.
            INCLUDE STRUCTURE bapimepoitem. "Include the structure of Dictionary Reference.
    DATA: END OF po_details1.
    DATA: it_po_details LIKE STANDARD TABLE OF po_details,
    wa_po_details LIKE LINE OF it_po_details.
    DATA: it_po_details1 LIKE STANDARD TABLE OF po_details,
    wa_po_details1 LIKE LINE OF it_po_details1,
    poheader  LIKE  bapimepoheader,
    return  LIKE STANDARD TABLE OF  bapiret2 WITH HEADER LINE,
    poitemx LIKE STANDARD TABLE OF  bapimepoitemx WITH HEADER LINE.
    PARAMETERS: p_ebeln LIKE ekpo-ebeln DEFAULT '5600010646'.
    CALL FUNCTION 'BAPI_PO_GETDETAIL1'
      EXPORTING
        purchaseorder = p_ebeln
      IMPORTING
        poheader      = poheader
      TABLES
        poitem        = it_po_details.
    LOOP AT it_po_details INTO po_details.
      READ TABLE it_po_details INTO wa_po_details INDEX 1.
      MOVE-CORRESPONDING po_details TO po_details1.
      MOVE: po_details-po_item TO poitemx-po_item,
            'X' TO poitemx-short_text.
      APPEND poitemx.
      CALL FUNCTION 'BAPI_PO_CHANGE'
        EXPORTING
          purchaseorder = p_ebeln
          poheader      = poheader
        TABLES
          return        = return[]
          poitem        = it_po_details[]
          poitemx     =
          poitemx[].
      CALL FUNCTION 'BAPI_TRANSACTION_COMMIT'.
      APPEND po_details TO it_po_details1.
      LOOP AT it_po_details1 INTO wa_po_details1.
        WRITE:/ wa_po_details1-po_item,
        wa_po_details1-material,
        wa_po_details1-short_text,
        wa_po_details1-plant.
      ENDLOOP.
    ENDLOOP.

  • Customer Invoice/Billing Document  Line Item Details

    I have be trying to get the line item details incuding Description, Qty, Ea pricing, etc., for an invoice for several days.   I am successfuly able to us the RFC FI_DOCUMENT_READ  to get a plethora of data back in several tables,  but none that contain the details I need.  I can see the informationI need usinf VF03 and the Document Number.  
    Here is the call I am making (Output tables defaulted in the .net connector wsdl file)
                Dim sAWORG As String = ""
                Dim sAWREF As String = ""
                Dim sAWSYS As String = ""
                Dim sAWTYP As String = ""
                SapBillingProxy1.Fi_Document_Read("", _
                     Me.txtDocNumber.Text, _
                    "VBRK", _
                    "MPMP", _
                    sAWORG, _
                    sAWREF, _
                    sAWSYS, _
                    sAWTYP)
    Am I asking for the wrong information or ??? 
    Please help or point me in the right direction.
    Thanks in advance for the help!

    Hi,
    If you are looking for Billing document line item details and if you have range of sales document reference numbers try using 'BAPI_BILLINGDOC_GETLIST' function module.It is remote call enabled.
    Regards,
    Sreekanth

  • Enabling Line-item Details

    HI Folks
    I am trying to test the feature called Line Item details. At the moment all accounts have this set to No. I ttried to change this on an existing accounrt to Y and load but I got an error message saying refrential integrity. I then tried to create a new account and uploaded this. It loaded burt when I went to a data grid and rightclicked there was no option for line items so I thought I might be missing something.
    I looked in my admin guide and there is another section in the metadata on the scenario which has the same attribute so I changed this to a Y but again when I try to reload I get the Refrential integrity error.
    Has anyone tried to set this up before particulary on existing accounts. Does the scenario also need this enabled or does that attribute refer ro something else. I havent used this featurre before but looks like it might be useful. Any help/advice is most appreciated
    Thanks
    Tahir

    The referential Integrity check come because you may have some data in the existing account as well. As this account did not support Line Item Details previously. So what you need to do is while loading metadata you check clear all metadata before loading. This might help you.
    Yes this needs to be enabled for the scenario in the metadata.
    Hope this is helpful
    Varun

  • Customer/Vendor A/C with line item details and with opening and closing Bal

    Dear Sir / Madam,
    Is it possible to have a customer and / or vendor Sub-Ledger account-
    with line item details and with opening and closing balance detail
    for a particular period.?
    Regards
    Chirag Shah
    I thank for the given below thread which has solved the same problem for G/L Account
    Re: Report to get the ledger printout with opening balances

    Hello Srinujalleda,
    Thanks for your precious time.
    I tried the referred T-Code
    But this report is not showing Opening balance, closing balance detail.
    It only gives transactions during the specified posting period and total of it.
    Please guide me further in case if I need to give proper input at selection screen or elsewhere.
    Client Requires Report in a fashion
    Opening Balance as on Date
    + / -  Transactions during the period
    = Closing Balance as on date
    As that of appearing for G/L Account by S_ALR_87012311
    Thanks once again & Regards
    Chirag Shah

  • User wants report with Vendor Line Item detail

    Greetings Experts,
    we have users who want a report similar to FBl1N, but instead displaying the line level detail.
    For Example:
    User wants to see information for Vendor X.  Wants the output not to be the 31 & 21 posting keys, but rather all the 40 and 50 posting keys for these documents.  Is there an existing report which will show me this?
    What the user really wants is to start with a Vendor, Company Code, As of Dates and see all the accounting document details, all the way down to the delivery details in a tabular format.  Does SAP provide anything like this without any drilldowns, or am I gonna have to code this thing from scratch?
    Thanks for the help

    No, not in a standard report, especially at the level of detail you're looking for.  It's a typical auditor request to see the 'other-side' G/L items but you won't find it in a standard menu report and certainly not with the delivery detail.

  • Work Order to cost center settlement with line item detail

    Iu2019m having difficulty finding a method to settle from a work order to a cost center with line item detail.  When an order is settled with KO88 or KO8G the total value for that work order/cost element combination is combined and posted to the cost center as a lump sum with the description of CTR\######.  Users would like to see the individual values that posted to the work order in a cost center report such as  KSB1.
    I donu2019t see anything in the settlement rule, settlement profile or allocation structure that will allow line item settlement from work order to cost center.     Is line item settlement possible when settling to a cost center?   Is there an alternate way to see these expenses as line items in KSB1?
    Thanks,
    Jeff

    Thanks Christian,
    We've defined an allocation structure that we use for Project System and Work Order settlement and have Receiver Categories established as FXA, CTR and WBS with "by Cost Element"  checked.  Work order costs do settle to the cost center entered in the settlement rule, the problem is it combines all items values as a single amount when posting to the cost center.
    For example:  
    expenses post to the work order under cost element 500000 for $500, $200, $300 and cost element 600000 for $250 and $250.  The settlement rule says to settle to cost center 170000.  When the settlement takes place cost center 170000 is debited $1000 to cost element 500000 and $500 to cost element 600000.  We would prefer to see individual posting of $500, $200, $300 to 500000  and $250, $250 to 600000.
    Thanks,
    Jeff

  • Inserting a new extension field in the line item details page

    Hi!
    Is it possible to insert an extension field/collection in the line item details page of the master agreement? I have tried supplying several Field ID found on that page on the DISPLAY AFTER field of the extension, but nothing works - the new field still gets displayed at the header page.
    Thanks in advance.

    Hi,
    Line Item is an independent class. You cant add an extension to Line Item through Master Agreement. This is the reason why the extension you add appears on the header tab of Master Agreement.
    When I go to create an extension definition, I don't find Line Item in the drop down of Extended Class Name. So, my guess would be that we cannot create an extension definition for Line Items.
    Let us know if you, or anybody, has a way to achieve it.
    Thanks
    Devesh

  • Report Painter - Totals are different on face of report & line item details

    Hello,
    We have a report designed in report painter. Thye lIbrary table is GLPCT.
    When we run the report system gives e.g. 100 $ on face of report. However when we double click on that line to get a line item details reoprt the value is different. It is either less or more than the amount diaplayed on initial report.
    Please can you suggest what coule be the probable reason for this anamoly.
    Thaks & Regards
    Shreenath

    Hi Sreenath,
    when you double-click on a line you are jumping to another report.
    The report you are jumping to has either been defined as a linked report by you, or it has been copied from an original SAP-report if you started the creation of your report by copying a standard SAP report.
    The sending report tries to pass on all the selections for the cell you double-click to the line-item report. For standard SAP reports it is guaranteed that this should work and the line item report gives the sames results as the report you are calling it from.
    For self-defined reports, this may not always work. I have had problems especially when calling line-item reports from sum-lines of my self-defined report. The reason was that the selections could not be passed on properly.
    Example:
    line 1: selection on account X and profit center A
    line 2: selection on account Y and profit center B
    line 3: sum of line 1 and line 2
    Now, when I double-click on a cell of line 3 and jump to line items, it passes on the selection idependently, i.e.
    accounts: X, Y
    profit center: A, B
    the line item report now gives me all values for all combinations of accounts X and Y and profit centers A and B.
    It does not take into account the combined selections in my original report.

  • Create a report same as KSB1 and add WBS line item details in the output

    Hello Everyone,
    I need to create a report exactly like KSB1 which should have a selection screen exactly like KSB1 but it should also display the WBS line item details from CJI3.
    What is the right way of doing it? Please advice.
    COEP is pretty huge in Production, and we need to fetch data by a specific date in selection screen or a cost center group. This can take a long time to fetch data from the table based on selection screen input. Are there function modules or do we need to use some other tables to fetch data same as COEP?
    Thanks for all your help.
    Regards,
    Shipra.
    Moderator message - Cross post locked
    Edited by: Rob Burbank on May 28, 2009 10:54 AM

    Hai ,
             Please go throuth the note  325546  , u need to implement the customer exit  COOMEP01 .
    regards,
    K.Vinay kumar

  • Prevent user from view line item details in KSB1 report

    Hi,
    how to restricting user from view line item details by double-click on it or highlight an item click on Document?
    Regards,
    Kelvin

    Hi,
    This issue got resolved.
    SAP suggested to execute the program "FAGL_CORR_0001" for company code wise.
    In ECC 5.00 from support pack 10 onwards two new fields has been added to table FAGLFLEXA.  (earlier we are on support pack 9, recently we applied the latest support pack)
    If we can execute the above program FAGL_CORR_0001, the two new fields will filled with relevant data and then we can able to use drill down option.
    This is for your information.
    Message was edited by:
            prasad naga

  • Create a report same as KSB1 and add WBS line item details from CJI3

    Hello Everyone,
    I need to create a report exactly like KSB1 which should have a selection screen exactly like KSB1 but it should also display the WBS line item details from CJI3.
    What is the right way of doing it? Please advice.
    COEP is pretty huge in Production, and we need to fetch data by a specific date in selection screen or a cost center group. This can take a long time to fetch data from the table based on selection screen input. Are there function modules or do we need to use some other tables to fetch data same as COEP?
    Thanks for all your help.
    Regards,
    Shipra.

    Hai ,
             Please go throuth the note  325546  , u need to implement the customer exit  COOMEP01 .
    regards,
    K.Vinay kumar

  • Printing GL line item detail - FAGLL03

    When printing a GL line item detail report like FAGLL03 or FAGLB03 with multiple GL accounts I always get a separate printed page for each GL account and for the total no matter how little detail is displayed. I can print all on one page if I sort by GL account but this removes the account number and description for each group and I need that for my users.
    Is there a way to print these GL detail reports where GL accounts are still separated with the account number and description shown above each section but will print continuously, without page breaks between accounts?   I don't see anything in the Print setup other than removing the AVS Statistics cover sheet which was a help.
    Thanks for any help,
    Jeff

    Thanks Troy,
    I just tried that and I see the results are displaying differently but it still prints each section on a different page.
    Thanks,
    Jeff

Maybe you are looking for