Customize message for extended notification

Hi All,
I am using extended notification for some workflows to send notification to the user's email when there are some work items pending in their UWL. I want to customize these messages based on task type. Lets say for example one message for TS1000000034 and another message for TS100000005.
Let me re-iterate my requirement: How to customize messages in extended notification ?
Any help is highly appreciated.
Thanks.
Edited by: Bijay Kumar on Oct 6, 2008 6:26 PM

Hi ,
If you looking for a task based extended notification.
I would suggest you use a background program which is scheduled to look for the specific task number in a list of user inbox in a timed fashion.
When found send an email to the address with content depending on the task type.
I am not sure how hard or easy is the configuration for the same and also introducing task based content in the extended notifications.
Let me know
Thanks ,
Charan.

Similar Messages

Customize Message for Entity Validation

Hello,
I am using ADF BC
How to customize the messages appears in the ADF Form on top when you have entity level validations? Like I created a list validator on the entity object. When user clicks the submit button, it appears on top of the form. How can I customize this message, change the heading to a friendly message rather than Error.
How can I do this?
Thanks

Hi,
see
http://download-uk.oracle.com/docs/html/B25947_01/bcadvgen008.htm#BABEFGCI
and
http://download-uk.oracle.com/docs/html/B25947_01/web_val007.htm#CACBAAJA
Frank

Customize Message for AUP

Dear All,
Can we customize the text on AUP webpage for Guest user ? like displaying instructions to put proxy server in the browser settings.
Thanks & Regards,
Mujeeb

This can be done in ISE 1.2. Please check the following picture
I think ISE 1.1.x can do it too, I will test that tomorrow. Please rate if this helps

SWNADMIN lock issue for extended notification?

Hi,
SWNADMIN transaction opens in the browser and few locks are created which I could see in st22 tcode. After the setup is complete and I close the SWNADMIN webpage browser, the locks are not deleted and I could still see them in st22 tcode. Why is this happening, shouldn't the locks be cleared after I close the browser?
I don't see any logoff button on the SWNADMIN webpage. We had to manually clear the locks from st22. Is there a note or something to apply to automatically remove this locks after SWNADMIN setup is complete?
Thanks
Praveen

Got solution from different thread.
SWNADMIN lock issue?
Thanks
Praveen

Extended Notification for Workitems

Hi,
we need to configure the SWNCONFIG for Extended Notifications.
We have already made some steps but the report SWN_SELSEN does not work. He says there are 0 WorkItem to be sent.
We should send an email with links to step inside the workitem (Approve, Reject ....)
Regards

>We have already made some steps
And these steps are? Did you include the task IDs, for which you want to send the notifications, to the configuration? DO you have new work items in the system to test the report?
Regards,
Karri

Extended Notifications: Message not sent

Hi Folks
I had configured the extended notifications in the development system and it was working perfactly. Then I transported the customizing request for the above config to Test system.
I have scheduled the job for SCOT and SWN_SELSEN.
SWN_SELSEN do select the notifications to be sent but it does not send any messages.
I have checked the application log and it displays a message SWN 032 ERROR while creating a message.
Waiting for your expert opinion on how to resolve this issue.
Regards
Waz

Hi Folks
Thanx for sending me your answers. I found the solution to this.
The solution lies in the activation of some services in SICF.
List of services can be found at the following link in the Pre-requisites section:
http://help.sap.com/erp2005_ehp_03/helpdata/EN/27/9a793426cea749b18fa409565c3dee/content.htm
Thanks & Regards
Waz

Extended Notification for UWL + Change the description of task/workitem

Hi,
I have implemented the Extended notification for UWL and I am getting the emails in outlook. Now the requirement is to customize the body of the email completely for the task '12300096'.
I have tried going to PFTC->Description but it does not have full text which I am getting in the email. I tried SE63 also. But in the email I am getting
The following work item requires processing in your SAP Workflow inbox in system xxx.
<Task description>
Log on to this system and process the work item.
If you have problems logging on to the system, contact your system administrator.
Now I want to remove the following lines;
The following work item requires processing in your SAP Workflow inbox in system xxx.
Log on to this system and process the work item.
If you have problems logging on to the system, contact your system administrator.
I don't find from where it's coming - please let me know how to remove these lines so that I can add my text in SE63.
Thanks,

Hi,
Go to SWNCONFIG -> General settings.
There you have TEXT_GOTO_INBOX - DTSWN_MSG_GOTO_INBOX. (I am not sure if this was the correct one, but you should check all the texts in general settings, if this was not the correct one.)
Now open dialog text SWN_MSG_GOTO_INBOX in SE61 (you see that you need to remove the prefix DT from the name). Here is your text. You can make your own Z-version of a dialog text in SE61, and then use that in SWNCONFIG general settings.
Regards,
Karri

Customize screen for notification

Hi,
Customize screen for notification
My requirement is to hide unwanted filed which I donu2019t want to fill in notification creation F2.
For eg in in reference object I donu2019t want to see QM order, order type and so onu2026.
Thanks,
sid

Dear Siddharth,
Go-to
SPRO>IMG>QM>Quality Notification>Overview of notification type> Select "F2"> Screen structure of extended view>
double click on "10\TAB03"
you can add/delete fields.
regards,
Amol

SAP GUI for Windows - Extended Notification

Hello All,
I have set up the extended notifications for outlook integration with sap workitem.
Subscription settings are as follows:
SHOW_ACTION_DECISION_AS     - Link
SHOW_ACTION_DISPLAY_AS      - Link2
SHOW_ACTION_EXECUTE_AS      - Link2
SHOW_INBOX_AS                         - Link2
I am receiving the work item on outlook successfully.
Now the thing is, when i click on display/execute/workflow inbox link; it is opening the SAP GUI for html & giving error "host not found". As per my subscription settings, it should open the work item in SAP GUI for windows.
I am using the general task TS..8267 & not defined any SWFVISU config to overwrite SWNCONFIG.
Do i have to make any other setting so that my http link "Workflow Inbox"/"Display Work Item"/"Execute Work Item" gets open in SAP GUI for windows and not in SAP GUI for html?
Any help will be highly appreciated.
Thanks,
Y Sharma

Markus,
with all respect, but this is nonsens, I mean not your answer, but SAP's policy.
Today I can customize Windows, webpages (if implemented), my Android smartphone, with all colors, icons and much more.
SAP is ages back in time, I would dare to say that SAP even made a huge step backwards with the new design and should re-think its policy.
How many times customers have asked for a custom-colored GUI? Countless, I would say. Speaking from the point of a developer it is important to see at first glance which systems I've logged on, and believe me we have plenty of it.
cu,
Michael

Message no. 8I766 Number Ranges are not maintained For Extended Withholding

Dear All,
I am facing the following problem when i am trying to generate the withholding tax certificate
1.) Message no. 8I766 Number Ranges are not maintained For Extended Withholding Tax
     Number Ranges are not maintained for Business Place and Section. Check entries in tables J_1iewt_cert (for Business Place) or J_1iewt_cert_n (for Section Code) and j_1iewt_certno in EWT.
I have checked all the above tables and found that the entries are maintained
2) When i am trying for print priview and then print its generating spool request and the certificate is getting saved -
> here the following problems are faced
      A) . TDS Number is not coming
      B).Details Of the tax deductor ( Name , Adress , TDS Circle , TAN & PAN is not coming Where       to update these details
      C) In Amount Paid / Credited Column - Some fixed amount is comming irrespective of the actual amount credited
Please help me in soving the above issues
Thanks & Regards
Arun.R

Hi
You need to maintain Section Code wise number range . Go to Sm30 Select Table J_1IEWT_CERT_N and maintain it.
Thanks
GG

Extended Notifications for UWL

Hi gurus,
I am trying to configure extended notifications to work with UWL. Problem is the notifications are not saved or sent by SWN_SELSEN.
Our SAP system is Netweaver 7.0 EhP 1.
I followed instructions found here:
http://help.sap.com/saphelp_nw70ehp1/helpdata/en/ad/d64842d59fb430e10000000a155106/content.htm
However, we already had configured the workflow to use extended notifications with SAPGUI. So when I ran SWN_SELSEN, the old notification still showed up, but not the UWL version. So I deleted the schedule for the old configuration, thinking there might be interference. Again I created a work item and ran SWN_SELSEN, this time no notifications saved or sent. I found that I could run RSWNUWLSEL and the notification is saved, but not sent.
Any idea what the problem might be?
Also I noticed that in the Worflow Book (2nd ed.) it shows to update the General Settings in SWNCONFIG with a url for the UWL. But I don't see that instruction in the SAP Help? Do I still need to do that? If so, is that url a portal quicklink to the UWL iView?
For what it's worth, here is what we are trying to accomplish:
1) the links in the email should take the user to the UWL, not SAPGUI
2) for a user decision, currently the user has to login with their backend system password, which may not be the same as their network password; I'm assuming that if the links now go to the UWL, it will require the user's portal id/password - which is synchronized with their network password, and that is what we want.
So if just putting the UWL url in the general settings will do the job, then why do I need all that stuff in the SAP Help (RSWNUWLSEL, etc.) anyway?
Any enlightenment would be appreciated!
Thanks,
Margaret

Hi ysr,
It sounds like you are asking two different questions ...
1) does using extended notifications necessarily require use of portal / UWL?
answer: No. In fact out of the box, (in our system which is 7.0 EhP1), extended notifications will generate links that go to webgui (SAPGUI for HTML) or SAPGUI. To make it work for portal is what my question is about.
2) you want to 'send the hyper link in the mails to clients'.
answer: if by clients, you mean users outside your system, you will have to do something other than out-of-the-box. Normally with workflow, execution of the links embedded n the email will require the person to have a logon to the SAP system. Perhaps if you have clients with access to the portal but not the backend, it might work if you configure extended notifications to work with UWL. The client would have to have the UWL role in the portal but obviously without backend access, they would not be executing anything on your SAP system, right? But for displaying information to them that might be useful.
of course another route would be to code completely custom methods to send the email which would include constructed links going wherever you want ... but that would be a lot of work! (and out of the realm of SAP Business Workflow)
Hope that helps!
Margaret

Extended Notifications for SAP Business Workflow

Hi expert,
i need your help!!
i have configured the "Extended Notifications for SAP Business Workflow" with the tnx SWNADMIN and this was successful. I can write emails, but i can read this only on SAP GUI with the tnx SOST. I don't receive email on my email-address.
can you say me, where is the problem?
Thank you in advance
marcel

Hi Marcel
Rope in your Basis Guy!
Basically, your Extended notif part is working fine..... emails reaching SOST is proof. Going out of SAP may need basis config.
What do you see, a yellow triangle or a red light in SOST?
Regards,
Modak

Message FZ626 -Payment orders are not defined for extended withholding tax

Hi Gurus,
Would you please help me with the message below:
Message FZ626 -Payment orders are not defined for extended withholding tax
In my company payment orders are created in F110 for accounts payable, as we use another ERP system (Baan) to perform the local accounts payments, and now I've just activated Extended withholding tax functionality With accumulation (necessary in Brazil) but I get this error.
Is it not possible to user payment order with extended withholding tax + accumulation? I find it hard to believe...
I've tried to unflag the payment order only for the payment method I'm using in FBZP t.code, but then no payment order were created but instead a payment document were posted with the withholding tax accumulation, but this is not the way we are working, and nothing is sent to Baan
any help is welcome !
TREAD LOCKED SINCE IT IS DUPLICATED FROM THREAD payment order are not defined for extended withholding tax

Hi,
On the analysis, the system expects an entry in the T059Q table with
code as XX.
The reason being in the extended withholding tax we use multiple
witholding tax codes and these entries are stored in the table
with_item. And in BSEG we populate the field withholding tax code i.e.
BSEG-QSSKZ with the value 'XX'. In classical withholding tax we used to
store the code directly which is not possible with Extended withholding
tax.
As the field BSEG-QSSKZ refers to the values in the table T059Q-QSSKZ
the entry 'XX" needed in this table for the corresponding country of the
company code to maintain the correct relationship and consistent
database information.
Hence for the statistical purpose and for the internal calculations we
need an entry in the table T059Q. Could you please maintain this code
i.e. 'XX' also in the table T059Q in a test system? Then retest your issue.
This should resolve your issue.
Kind Regards,
Vanessa.

Customize screen for Support Desk Message

Hi all,
I want to customize the screen layout of a Support Desk Message.
In the standard Screen Profile of a Support Desk Message you can select a subject. When selecting a subject, you are selecting a Code. I want to add an extra selection field above the Subject field. For example "Main Subject". And the Main Subject should display the Code Group. When people select the Main Subject first (Code Group), than only subjects (codes) are visible which belongs to that Main Subject. Could somebody help me out here.

Hi Piets!!
Looking for your post and your requirement, you can't do this screen layout modification. It required use a ABAP techiniqué like a SCREEN EXIT or modify a standard screen.
Using a standards customizing, you can put a specific subscreen (a screen into a specific tab) or disable a screen. For all this cases you need tell how you access the message (for TA. CRM_DNO_MONITOR or TA. RNOTIFWL) because there are two diferents paths to configure in the IMG.
Regards
Issac Ohasi
SAP Solution Manager Consultant
São Paulo - Brazil

Extended Notification for Workflow

Hi,
I need to know what are all configurations have to be done in tcode SWNCONFIG for sending the notification to e-mail or SMS.
I need sample scenario.
Can anyone send me step by step procedure ?

Hi MB,
The extended notification configuration is explained with details in SAP library. I have to admit that the documentation is not very clear, and there are even some small "mistakes", but you should just try to follow it.
Anyhow, actually it is much easier to do the configuration with transaction SWNADMIN (if the WAS environment is properly configured and you are able to use BSP applications). It is really straightforward to use. Configure extended notifications first with SWNADMIN, and then if you have to achieve something special (for example if you want to change the texts of the notification, etc.) you can do the enhancements to your scenario with SWNCONFIG.
Regards,
Karri

Customize message for extended notification

Similar Messages

Maybe you are looking for