Customize PSJ (CJI5 Selection Screen Criteria)

Hi experts,
I need to add a customer field to CJI5 Selection Screen criteria. Actually i found the SAP NOTE 188663-Enhancing Selection views and dynamic selection, that describes how you can enhance the dynamic selection (selection screen of a PS report).
I allocated successfully my field in the D3 Functional Group, and appears when I push on the "optional delimitations" button, but doesn't´t limit the selection.
Anybody knows why "Optional Delimitations" doesn't´t works?
I want to allocate my customer field in the "Other Selection Criteria" button because i think that works correctly.
Anybody knows how can i do this?
Is other SAP NOTE that describe this enhancement?
Thanks in advanced.

Hi,
I found the SAP NOTE 635711 that resolves my problem.
Regards.

Similar Messages

Selection screen criteria for queires

Does BI NW2004s still allow users to make use of the selection screen criteria to enter different running values for the queries?

Hi,
It is working same as previous versions.There are some functional and interface changes with NW2004S.Also check the links below.
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/80bf2f79-021d-2a10-5082-dadc79aaa92c
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/90bc0c7a-031d-2a10-d7a2-9047b4d1f43f
Regards.

What should be my selection screen criteria for data fetching..............

A process is required to trigger an employe's master datat from sap to EWA( some other system) for any of rthe below actions.
NEW HIRE
TERMINATION
FMLA PAID LOA
NON-FMLA PAID LOA
FMLA UNPAID LOA
RETURN FORM LEAVE
REHIRE
CHANGE OF POSITION
STATUS CHANGE
EXPATRIATION
I AM NOT SURE WHAT SHOULD BE MY SELECTION SCREEN CRITERIA.

Hi Anil,
One option can be to write a custom program for this.
Schedule it as a job at the end of the day.
Consider all the required actions that were run on that day & the data that was changed.
The changed data can then be sent to legacy as per your requirement as a daily interface file.
I think you shud have a look at the standard utility program RPUAUD00 , which logs the infotype changes or might be you can think of adding the change indicator includes from the std program to your custom program & write the custom interface.
Well i already see some good ideas placed in the above posts but i think this
can be one option as well so thought of putting this to you.
Hope this helps.
Kindly reward in case useful.
Regards & Thanks,
Darshan Mulmule

Missing selection screen criteria

hi all,
I have a interesting problem about report criterias.I have a bi report query with four criterias one of them 0curtype ( because report have currency type conversion ) . Problem is that ; in our tests system I see four criterias but in production i see three. i cant see 0curtype in Query designer and portal report when i run query but also 0curtype has a value (TRY) . I mean report has four criterias , but 0currtype is invisible and it has value ,i cant see it . 4 days ago report was same on both systems. but now its different.
please help. how can i see the missing and invisible criteria.

Hi Hasan,
Just Check that Variable for Currency Type has been transported to production System properly.
Go in RSA1 there, Transport Connection in that select Object Type, in that Query Element under that you will have variable option.
Search for that specific variable..
if it is there, Check for Authorisation of variable for that.
Regards,
Rajdeep.

Logical Database (PNPCE) , selection screen hide.

Hi Gurus,
i have couple of questions related to logical database pnpce.
1.Since i know logical database has there own selection screen , my requirement is i want to add my custom fields to the selection screen other than what is provided is it possible or not.
2. i want to hide the selection screen of the logical database, but i do want to create my own in which i will be declaring some select options of the standard logical database screen has, like pernr, organisation unit, etc, how do i communicate the entered data with the logical database if i dont use the logical database standard selection screen, hope i could able to explain my problem, please see into my problem and let me know thanks in advance,
hussaini

Hussain,
LDB have standard selection screens, if at all you want to customize those standard selection screen you would have to define a report category for your program. You`ll have to configure in the spro settings for your corresponding report category.
If you would like to declare your own selection criteria, you can very well do it and these criteria are visible below the standard selection criteria. You can process these elements in your program and not in the LDB standard program. Use the normal selection screen events in your program for processing your selection criteria.
Hope this info is helpful, reward points if convinced.
Regards

How to Make Field "Creation Date" Mandatory (in EP Selection Screen)

Dear experts,
I am on SRM 7.0.
In Shopping Cart, i'd like to set Field "Creation Date" as Mandatory Field in EP Selection Screen / Criteria Maintenance.
Is there BADI or SPRO need to be maintained?
Thanks & regards,
Jack
Edited by: Jack4ever on Aug 9, 2011 7:42 AM
Edited by: Jack4ever on Aug 9, 2011 7:43 AM

Hi Jack,
Not sure if it possible in standard with any customizing but it might be able to achieve this through webdynpro enhancements.
Regards,
Prasanna

Retrieve input values from the selection screen

I have a requirement to retrieve the variable value or values inputed from the selection screen and label the worksheet tab to replace the tab name 'Sheet1' from the Excel. The only way to do this would be to write a macro to label the sheets but how would I retrieve the value(s) from the selection screen criteria? Is the value of the selection screen entered by the user stored in some table? How would I write the macro to retrieve this value?
For example, I want to retrieve the company code entered from the selection screen and lets say the company code entered as 10; I would want to replace the worksheet from 'Sheet1' to '10' . Texts would be more recognizable.

Use the option Layout->Display Text Elements->Variables from the BEx toolbar. This will display Variable screen user input on your workbook in a fixed location. Then you can use your macro to name the worksheet with the cell reference.
Thanks
Vineet

How to retrieve values from Dynamic Selection screen while using LDB - PSJ

I am having problem in PSJ Logical database. In a custom report which is using PSJ LDB, we are using PROJ and PRPS_R tables.
When I run program it displays one dynamic selection screen, there we are giving selection criteria for PRPS (Master data WBS element) - Created on (giving some range like 2011/01/01 to 2011/01/31).
So I want to display all WBS element which are created during the period (2011/01/01 - 2011/01/31).
How do I retrieve the select-option low and high value of the field Created on Of WBS element if we Select data from any table based on this condition.
Please help me.
Thanks.

in fact you don't have to get the values, you only need to tell to the program to take them into account :
GET PRPS.
CHECK SELECT-OPTIONS.

Customize selection screen of logical database AFI of report RIAUFK20 ?

Hi Experts,
I have to customize the report RIAUFK20 which use logical database AFI.
I have to do the following:
- Change the field labels of some fields in the selection screen.
- Add more field into selection screen which does not appear in the nodes of logical database structure, for example TIDNR in table EQUZ.
So what is the best way to achieve that result?
I intended to copy the AFI into ZAFI and change, but still struggle with add fields which does not appear in the structure of logical database.
Any help is appreciated, thanks!

Specify your logical database on Program "attributes".
It will display the standard selection screen of LDB. Now in your report, create selection screen as in other programs for the additional fields.
It will first display the field of LDB, followed by fields provided by your selection screen.

Selection screen: PNP database or other selection criteria

I received a specification of a new to be developed program where they defined a selection screen with a with 2 radio buttons:
1. Use the logical database PHP for data selection (rb1);
2. Use other criteria for data selection (rb2).
My question is, is this possible?
Or should I add the other criteria between the GET PERNR and the following code with?
Sample:
GET PERNR
IF rb2 = X.
 [Check other criteria]
 IF sy-subrc <> 0.
 EXIT.
 ENDIF.
ENDIF.
null

When either pnp OR other selection :
Create program 1 with 2 radiobuttons ==> pnp-selection (rb1)or other selection (rb2). When rb1 is selected go to pgm1 with pnp ; when rb2 is selected go to pgm2 with other selection criteria. Copy pgm1 to pgm2 and add extra selections en delete pnp-statements.
When pnp WITH extra selections : 1 pgm can be used as you described.

How to customize the Selection Screen of Logical DB (PNP)?

Hi All,
In LDB selection screen
PERNR field is not given in ranges and also
Personal area and subarea are given in single selection field.
I need to customize this for my report.
Plz guide me reg this.
Thx in advance.
Albert

-Go to se38 "Give program name " and click "Attributes" ...
- After that click HR report Category " a pop-up will come again git report category Here you can create the filds and can attach report category with your program .
You`ll find more help if you search "create report category on SDN or google ...
Here you go
http://www.atomhr.com/know_preview/hr580_Cust_sel_screen_chp1_46.htm
Hope thisll give you idea!!
Pl... award the points.
Good luck
Thanks
Saquib Khan
"Some are wise and some are otherwise"
PS.
Put yourself on the SDN world map (http://sdn.idizaai.be/sdn_world/sdn_world.html) and earn 25 points.
Spread the wor(l)d!

Can you "combine" criteria for 2 or more fields on a Selection Screen?

Good day everyone,
Here's my question: I understand that I can put fields on a Selection Screen and pre-fill them with data values. In this particular case, I want to pre-fill a couple of hidden fields with data values that will be used as criteria when I read data from the database; however, I need to pull back records that have this COMBINATION of data. For example:
WERKS BTRTL
Z002 Z001
Z002 Z002
Z003 Z001
Z003 Z002
So in my SQL, if I say "werks IN s_werks" and "btrtl IN s_brtrl", true, it will still work. But really, I need to say "if werks = 'z002' and btrtl = 'z001', or werks = 'z002' and btrtl = 'z002', etc. I can't rely on the simple "IN" functionality because it's possible a new value could be added in the future:
WERKS BTRTL
Z003 Z003
So if I use the "IN" logic and the record has werks = 'Z002' and btrtl = 'Z003', it would be returned. But I really don't want it returned, since a combination of werks = 'Z002' and btrtl = 'Z003' doesn't exist in my table of valid combinations.
Is this even possible to do in a Selection Screen? Do I go ahead and populate the fields separately, use the "IN" functionality, then spin through my resulting internal table and delete anything that doesn't match my "table" of valid combinations? Do I skip putting these on a Selection Screen completely and check the values in my SQL statement?
Thanks in advance -- points, as always, will be given.

Hi
Yuo can try to use FOR ALL ENTRIES option.
IF you have:
WERKS BTRTL
Z002 Z001
Z002 Z002
Z003 Z001
Z003 Z002
You should do something like that:
DATA: BEGIN OF <TAB_SEL> OCCURS 1,
 WERKS TYPE WERKS,
 BTRTL TYPE BTRTL,
 END OF <TAB_SEL>.
WERKS BTRTL
<TAB_SEL>-WERKS = 'Z002'. <TAB_SEL>-BTRTL = 'Z001'.
APPEND <TAB_SEL>.
<TAB_SEL>-WERKS = 'Z002'. <TAB_SEL>-BTRTL = 'Z002'.
APPEND <TAB_SEL>.
<TAB_SEL>-WERKS = 'Z003'. <TAB_SEL>-BTRTL = 'Z001'.
APPEND <TAB_SEL>.
<TAB_SEL>-WERKS = 'Z003'. <TAB_SEL>-BTRTL = 'Z002'.
APPEND <TAB_SEL>.
SELECT * FROM <TABLE> INTO TABLE ITAB
 FOR ALL ENTRIES IN <TAB_SEL>
 WHERE WERKS = <TAB_SEL>-WERKS
 AND BTRTL = <TAB_SEL>-BTRTL.
In this case you need to fill correctly the internal table <TAB_SEL> with the all combinations.
Max

Customize Selection Screen

Hi,
For one of our reports, we need to display help text in selection screen.
The report filters have a certain combination of default values for multiple fields and unless user keeps all filters active, certain type of information is not displayed. We need to explain the significance of each value.
The user can still change selection criteria if he selects other combination of selection variables. Hence, we cannot add text in report output.
Any pointers on this will be a great help. We are on BI 7.
Regards,
Nikhil

Hi Refer to this conversations:
Re: help button with documentation .
Re: How to add information button on select screen for documentation

Including User selection criteria along with LDB standard selection screen

Hi
While creating a HR report, along with the standard selection screen, if the cusomer requires some more fields to be added, How to retrive the data from the DB?
Is it the way to retrive the data based on Standard selection criteria from the LDB and then filter it based on user criteria or any other way?
Please help me out in this regard.
Thank you.

Yes thats the way. You get the data based on Selection screen of LDB (You can select Report Catogory you wish to) once you get data, You can put CHECK statement to see the data against PXXXX type to the filter value from you custom field on selection screen.

Filtering criteria in User selection screen

Hi experts,
Is there any ways to display values in the selection screen based on the above criteria that user selected? For example, the selection screen has 3 selection tabs. The first tab is to choose region (A,B or C). When user selects region A, the second criteria shows only the factories that located in region a, not all of the factories. Once user select a factory, the thrid tab shows only the manager names that works in that factory.
I'm new in this area so please provide me an instruction steps by steps.
Thanks so much,
Phant

Do you have any mapping maintained in any InfoObject for all these characteristics you mentioned, or you are trying to pull out this information based on the trascational data from the cube.
There is one option in the query designer. Go to Advance tab of the characteristic and under second option "Filter vale for selection during query execution", select Characteristic Relationships.
- Danny

Customize PSJ (CJI5 Selection Screen Criteria)

Similar Messages

Maybe you are looking for