Customize  report for PO GR IR

Haii SAP expert
I have use standard sap code ME2N, ME2I and MR11 for PO GR and IR status. My user here said that standard report is hard to read.
Is there any customize report that have been build? if there is can anyone post its in this forum
Help-help

Hi,
The standard report / update funstion, is MR11. This is designed to show the individual records that have a GR/IR balance.
As for the ME2L, M, N reports. they are very difficult to read but there is a BIG tip if you are using release 4.7 or newer.
You can configure a flag on the "scope of list" to switch the list display to the ALV format.
This turns these almost useless reports into a whole set of VERY useful reports (due to the ability to change the layout, filter it, add subtotals, etc. etc) and it makes it VERY much easier to pass the results to a spreadsheet due to the column type layout it provides.
So if you are on 4.6 or earlier, then sorry, you are missing a GREAT improvement.
If you are lucky to be on 4.7 or newer then simply get someone to set the ALV flag on the "scope of list" config.
Then when you run your first report for the new layout, click on the multicoloured cube icon (change layout) and change the layout to whatever you want (first of all remove the subtotalling that normally comes as standard, this makes the screen lok very messy)
Steve B

Similar Messages

  • Are SSRS reports suitable for making customizable reports?

    Hi,
    I want to give users an option to make customize reports in my web application. So I need to confirm that SSRS reports are suitable for this option or something else I have to implement it.
    And if SSRS reports are suitable for this, then guide me how to start customization using SSRS reports.

    Hi Sanchit,
    If I understand you correctly, you are looking for an option that can allow users can create their own report on your web application, right?
    Microsoft Reporting Services offers four report authoring environments:
    Report Builder 3.0. Use this tool to design reports that are compatible with a SQL Server 2008 R2 report server by using the familiar Ribbon interface.
    Report Designer. Use this tool in SQL Server 2008 R2 Business Intelligence Development Studio (SQL Server 2012 SQL Server Data Tool) to design full-function
    reports that are compatible with a SQL Server 2008 R2 report server.
    However, the authoring tools cannot be integrated into custom web application, so I am afraid there is no such an option to make customize reports in your web application.
    If I have anything misunderstood, please point it out.
    Regards,
    Charlie Liao
    If you have any feedback on our support, please click
    here.
    Charlie Liao
    TechNet Community Support

  • Error while running a customize report in oracle ebs

    Hi ..
    can anybody suggest how to solve the follwing error while running a customize report in oracle ebs?
    XXIFMS: Version : UNKNOWN
    Copyright (c) 1979, 1999, Oracle Corporation. All rights reserved.
    Current system time is 03-JUN-2011 11:09:24
    +-----------------------------
    | Starting concurrent program execution...
    +-----------------------------
    Arguments
    P_DATE_FROM='2010/04/01 00:00:00'
    P_DATE_TO='2011/06/03 00:00:00'
    Forcing NLS_NUMERIC_CHARACTERS to: '.,' for XDO processing
    APPLLCSP Environment Variable set to :
    Current NLS_LANG and NLS_NUMERIC_CHARACTERS Environment Variables are :
    American_America.AL32UTF8
    stat_low = 9
    stat_high = 0
    emsg:was terminated by signal 9
    ld.so.1: rwrun: fatal: librw.so: open failed: No such file or directory
    Start of log messages from FND_FILE
    End of log messages from FND_FILE
    Program was terminated by signal 9
    Concurrent Manager encountered an error while running Oracle*Report for your concurrent request 1068011.
    Review your concurrent request log and/or report output file for more detailed information.
    Executing request completion options...
    ------------- 1) PUBLISH -------------
    Beginning post-processing of request 1068011 on node D0005 at 03-JUN-2011 11:09:24.
    Post-processing of request 1068011 failed at 03-JUN-2011 11:09:24 with the error message:
    One or more post-processing actions failed. Consult the OPP service log for details.
    Finished executing request completion options.
    Concurrent request completed
    Current system time is 03-JUN-2011 11:09:24

    Please post the details of the application release, database version and OS.
    Is the issue with this specific concurrent program?
    Can you find any errors in the CM/OPP log files?
    Please see if these docs help.
    On R12.1.1/Solaris Platform While Generating Oracle Reports Files Failed With Error " ld.so.1: rwconverter: fatal: librw.so: open failed: No such file or directory [ID 1067786.1]
    Apps UPG Fail With Error Ld.So.1: Rwserver: Fatal: Librw.So [ID 961222.1]
    Thanks,
    Hussein

  • ECC report for sales order status from order entry to Invoice (OTC rpt)

    Dear All.
    Looking to see if there's a standard report or transaction that we can use to review sales order line item status.
    VA05 provides a good view from sales, and VL06O provides a good view from LE, and VF05 provides a good view from billing.
    But there is there something that would list sales orders and show related quantity, open, delivered, billed all in one report?
    Many thanks!

    Thank you Shiva.
    That's what we were thinking as well.  Just wanted to make sure we didn't miss something in case SAP provided a template or customizable program for this.
    Thanks

  • Report for customer open item exclude vat

    Dear Experts,
    Is there a report in SAP which can extract the customer open items with VAT amount excluded?
    Thank you

    You have to customize a report. There is no standard report for this.

  • Report for Transporter Details.

    How to create a customize report to capture the transporters details and the quantity supplied and amount of the materials received against the PO. PO includes both the supplier and transporter.

    For some clients,I have seen a custom  tab set up that captures information about the transporter and the delivery. This tab is triggered while using MIGO and the data is stored in a custom table. This table can contain the list of materials that are captured in the MIGO line items. A report will read the contents of this table and display.
    The following thread has information on how to create a new tab.
    Re: ADD CUSTOM TAB IN MIGO
    Hope this helps.
    Regards,
    Aroop

  • Why can't I create a report for standard price by material

    Any ideas? All reporting I have tried in SQO1 and even in SE16 returns 0 value for standard prices?
    Firstly why is this? and secondly is there another way I can pull a report by material showing standard price?
    Points awarded, many thanks

    hi,
    In MM60, u can get report for  materials having standard & moving average price based on ur input in selection screen like material,plant,material type,material group & created by only. As of my knowledge,
    there is no option to get list of materials with standard price in std.SAP.
    There are two options to generate report for materials with standard price.
    1. It is better go for customization . selection screen must contains price control field. if u enter price control like 'S' or 'V' in intial screen , report is generated.
    2. create a ABAP query for this.
    I hope this info is helpful to u.

  • Customize report on Answers

    Hello!
    I would really appreciate any help because I try to find out how to customize a report for a customer and my deadline is approaching. I am new to Oracle BI and also self-taught.
    I have my dimension (Time) and some measures in a pivot table. I want to kind of group the measures(columns) in a more meaningful way by putting a headline exactly above the titles of my measures.
    For example: I have "Quantity", "Percentage" and I want to put "Production" above to distinguish that these two columns are Production and I have "T.Quantity", "T.Percentage" and I want to put "Target" above to distinguish that these two columns are Target. Somehow add a row above the heading of the columns to put my own headings. I have found how to customize the colors, font even to make the borders to mark the columns but I cannot find how to add my own heading (that will not come out of the model, it will be my own) for a more meaningful report.
    Thank you in advance!
    Matilda

    You got nice name, I like it since i saw the movie...
    Column Properties->Column Format->Headings
    check 'Custom Headings'
    to go with as you wish
    The same can get from Column->fx->Column Formula
    If this not what you are expecting can you share a image to my email
    If helps pls mark as correct/helpful
    Edited by: Srini VEERAVALLI on Jan 4, 2013 7:50 AM

  • Standard reports for cash and fundflow reports?

    Hi,
    i need a requirement to maintain reports for cash and funds flow statements?Actually relevant to these reports i use to maintain customize only but coming to fundflow and cash flow there is much complications to do that.
    so is there any standard reports to maintain fundflow and cash flow reports which is relevant to FI-CO
    Thanks in Advance
    vass

    Hi
    You have Cash flow statement based on 0FIGL_VC1
    http://help.sap.com/saphelp_nw70/helpdata/EN/7d/6cfa40ee14f26fe10000000a1550b0/frameset.htm
    You also have Cash flow statement based on 0BCS_C10, but not sure it does suits to your requirement.
    http://help.sap.com/saphelp_nw70/helpdata/EN/39/09503e50a9054be10000000a114084/frameset.htm
    Hope it helps

  • Expiry Date - Customize report

    Dear All
    Without using batch management and warehouse management i declare self expiry period for material in material master. During goods receipt the system ask me to enter manufacture date and all. Now i want to customize one report for to analyze expiry date of the material. I cant able to write the functional spec for the report. I am totally confusing to create the spec.
    If i am receiving single material in first of the month and last of the month . Now the sum up qty in stock. If i run the report means how it shows the date for the material. Kindly help me. Whether it is possible or not?
    Shobana

    Hi,
    You cannot achieve this without batch control.
    If you receive one item on the 1st of the month and 1 item on the 10th of the month nand then issue 1 utem on the 15th of the month, how will the system know which item has been issued.
    By using bathces you can specify the batch number at receipt and attach an expiry or production date, then when you issue the stock you can specify which batch has been issued. the system therefore has a record of the stock and when it will expire.
    Without batches the data for each delivery is not stored anywhere and so NO report can be produced.
    Steve B

  • Declaring Customizable reports as a portlet

    Hi all,
    After creating a Customizable report I declared it as a portlet;Later the same was added to a Portal page.The problem faced is that the user(for whom the page is declared as a home page) on clicking the customize link and selecting a value for the report is unable to see the report; message stating that "No row returned" is displayed.
    The catch here is that the same report is visible to Portal30 user when he runs it as a customizable report.Tried all possible workards including changing the privileges as required but all seemed to be futile.
    Any info on the same would be welcome.
    Regds.
    Kiran.

    Hi,
    Which version of portal is it? Have you enabled hosting on your portal? If hosting is enabled only those records for the
    subscriber will be visible. Please check the caching values of the page as well.
    Thanks,
    Sharmila

  • Standard Report for 5 Accounting Books

    Hi SAP Guru,
    Would like to know what is the corresponding Standard Report or tcode in SAP for the following books:
    1. Disbursements Journal
    2. Receipts Journal
    3. Sales Journal
    4. General Ledger Journal
    5. Cash Journal
    Appreciate your feedback on this.
    Thanks,
    Julie Ann

    Julie-
    I don't think SAP has standard reports for all the books you have mentioned. SAP has some line item reports like FBL1N - Vendors, FBL3N - General Ledger Accounts, FBL5N - Customers and depending on your needs you will have to customize these reports. Like for example, if you want to see receipts journal you will use FBL3N and include only those GL Accounts which are responsible for receipts and similarly for disbursements.
    But, there is a functionality called cash journal which if you implement will get some of your reporting needs. I have never worked on cash journal, but know it is out there.
    As far as sales journal is considered, see if you can use transactions SDO1, VA05.
    Also check transaction SAP1 which gives SAP Standard reports. Maybe there is some report that helps you.
    Shail

  • Web report for Sentinel Log Manager (or possilby RD)

    Hi all,
    My customer wants to replace Webtrend. So customers are given me a set
    of
    apache log files. They said based on those logs Webtrend could already
    build
    some useful web based report for their business units. From what I have
    known,
    what makes them useful are:
    1) Those IP addresses could be resolved to domain, identifying the
    source of
    the browsers
    2) URL are analyzed such that they could give a 'hit rate' based web
    report for
    trend analysis.
    3) What browsers are used to view their web sites so they know the
    compatibility
    issues.
    If I customize our report now, would it be possible to generate similar
    reports for the above items?
    1) I wonder if it is possible during the report generate, would some
    other add-on java plug-in could work for the DNS resolution before data
    generation?
    2) Any one know the logic of the webtrend about how it correlates
    various URL visited in the apache logs are considered different 'hit'?
    3) I believe we could base on filter to identify different version of
    the browsers used?
    I don't have a webtrend so I could not compare and look at how they
    generate reports from the apache log I have. Please let me know if
    anyone has any idea about it.
    Thanks,
    Geoffrey
    geocheng
    geocheng's Profile: http://forums.novell.com/member.php?userid=90913
    View this thread: http://forums.novell.com/showthread.php?t=425354

    Hi geocheng,
    For (1): this feature already exists, although it's in a somewhat
    experimental state. You need to install the Generic Hostname Resolution
    Service Collector, and then enable hostname resolution for each
    Collector (in this case, the Apache Collector).
    For (2): I'm not sure what a "hit rate" is, but the Apache Collector
    should give you a list of URLs that were visited and you should be able
    to calculate counts per URL (split across the TargetDataName and
    TargetDataContainer, note) using a SQL query or whatever.
    For (3): I don't actually know what, if anything, the Apache Collector
    does with the browser details; it may put that into the
    ExtendedInformation field. You may wish to customize the Collector
    slightly (this should be pretty easy to do) to copy that specific data
    into a separate CV field; if you do that, then calculating the relative
    frequency of hits from different browser types will again be a simple
    COUNT style SQL query.
    This is an interesting use case - we haven't really built much content
    around the Apache Collector but as you are indicating, there might be
    some simple things we can do that would be pretty useful. I'll take it
    up as a potential project...
    DCorlette
    DCorlette's Profile: http://forums.novell.com/member.php?userid=4437
    View this thread: http://forums.novell.com/showthread.php?t=425354

  • Export / Reports for STS utilization on Span's between 15454 nodes

    So...
    I'm looking for a convenient way to keep track of my STS allocation by running reports for our customer circuits, between our various SONET 15454 and 15310 nodes.  Ideally, I'd like to be able to tell CTC or CTM to generate a report which shows me how much (and which ones) STS-1's I'm using between various nodes, in a nice concise format; to help me plan for capacity, circuit rolls, and expansion.  The report should also include things like % of a particular OC-48 or or OC-192 is used, available, outline of contiguous and non-contiguous STS's, and summary for all my point-to-point circuits utilization.
    Currently what I have to do is:
    1) Export from circuit-view (in CSV format) for each span, a seperate exported
    file or each span, one by one (hoping not to overlook one)
    2) Reconcile each Exported file against a spreadsheet that I maintain/update
    (about once a week) updating the stats for each span
    This way, I "hopefully" have a living document, updated with what bandwidth I have where (and for who), which I can reference in a consolidated way for my entire 15454 network.  This greatly simplify's my capacity planing, rolls, and generally just keeping tabs on what and who I have assigned where.
    It seem like there should be a simple "Generate Report" feature either whithin CTC or CTM.  I should be able to customize it as I want.
    Perhaps there is 3rd party software to inject into CTM which will extract such a report.
    For all you 15454 guys and gals out there, please help if you know of a solution!!
    --Scott

    So...
    I'm looking for a convenient way to keep track of my STS allocation by running reports for our customer circuits, between our various SONET 15454 and 15310 nodes.  Ideally, I'd like to be able to tell CTC or CTM to generate a report which shows me how much (and which ones) STS-1's I'm using between various nodes, in a nice concise format; to help me plan for capacity, circuit rolls, and expansion.  The report should also include things like % of a particular OC-48 or or OC-192 is used, available, outline of contiguous and non-contiguous STS's, and summary for all my point-to-point circuits utilization.
    Currently what I have to do is:
    1) Export from circuit-view (in CSV format) for each span, a seperate exported
    file or each span, one by one (hoping not to overlook one)
    2) Reconcile each Exported file against a spreadsheet that I maintain/update
    (about once a week) updating the stats for each span
    This way, I "hopefully" have a living document, updated with what bandwidth I have where (and for who), which I can reference in a consolidated way for my entire 15454 network.  This greatly simplify's my capacity planing, rolls, and generally just keeping tabs on what and who I have assigned where.
    It seem like there should be a simple "Generate Report" feature either whithin CTC or CTM.  I should be able to customize it as I want.
    Perhaps there is 3rd party software to inject into CTM which will extract such a report.
    For all you 15454 guys and gals out there, please help if you know of a solution!!
    --Scott

  • Constructing Customize Report - SCCM 2012 R2

    Hello, everybody. 
    I have a great difficulty. My difficulty is when have to customize report. 
    Someone would have some stuff to help me, or tell me how do I start, how can I understand these "FROM, SELECT, and others .."? 
    Leveraging ... I need the following reports: 
    1 - I need a custom report metering software to bring me the following: 
    Hostname, User, Application Name, Full use, Version, Serial, Installation Date, Last Accessed 
    2 - I need a custom report that will bring the following: 
    Hostname, and Domain User. 
    There is a report hardware (Computer with a specific workgroup or domain) that I put%% and it shows me what I asked, but this only happens in SCCM 2007. In 2012 it will not let me put%% and forces me to choose a domain. 
    Atenciosamente Julio Araujo

    Hi
    In order to get the report "Computers with a specific workgroup or domain" like it did in SCCM 2007 you would have to do the following:
    1. right-click the report in SCCM 2012 and select edit. The report should be loaded in Report Builder 3.0
    2. In Report Builder, expand Parameters, right-click
    variable and then select parameter Properties
    3. In the Report Parameters Properties window, click Available Values
    and then select None and click OK
    4. In Report Builder, click Run. You should now be able to input a wildcard in stead of choosing the domain or workgroup
    5. Save the Report under a new name so you do not overwrite the original.
    If you want to learn how to author reports in SQL Reporting Services - I would recommend this book:
    http://www.amazon.com/Microsoft-Server-2012-Reporting-Services-ebook/dp/B007L379VW/ref=sr_1_1?s=books&ie=UTF8&qid=1400319571&sr=1-1&keywords=reporting+services
    It is not a SCCM 2012 book but a lot of the Things that you learn will still be of great value when you author reports in SCCM 2012.
    As for your wish for a custom Software Metering report that would be more complicated as I can see that your want serial in that report. I am guessing that you mean the serial number for the application and that is not collected by ConfigMgr 2012 by default.

Maybe you are looking for