Customize screen for notification
Hi,
Customize screen for notification
My requirement is to hide unwanted filed which I donu2019t want to fill in notification creation F2.
For eg in in reference object I donu2019t want to see QM order, order type and so onu2026.
Thanks,
sid
Dear Siddharth,
Go-to
SPRO>IMG>QM>Quality Notification>Overview of notification type> Select "F2"> Screen structure of extended view>
double click on "10\TAB03"
you can add/delete fields.
regards,
Amol
Similar Messages
-
Modify detail Screen for notification item
Hi experts,
I want to modify the detail screen for a notification item (FG: IQS0 - Dynpro: 3030). Using enhancement QQMA0008, i can implement a subscreen located in function group XQQM. Unfortunately this seems to be limited to 3 lines only. Is it possible to pop up a full customer screen here?
Thanks in advance!
Best RegardsI don't think so, but start with [Note 36889 - User subscreens in quality notifications|https://service.sap.com/sap/support/notes/36889]
Regards,
Raymond -
Customize screen for Support Desk Message
Hi all,
I want to customize the screen layout of a Support Desk Message.
In the standard Screen Profile of a Support Desk Message you can select a subject. When selecting a subject, you are selecting a Code. I want to add an extra selection field above the Subject field. For example "Main Subject". And the Main Subject should display the Code Group. When people select the Main Subject first (Code Group), than only subjects (codes) are visible which belongs to that Main Subject. Could somebody help me out here.Hi Piets!!
Looking for your post and your requirement, you can't do this screen layout modification. It required use a ABAP techiniqué like a SCREEN EXIT or modify a standard screen.
Using a standards customizing, you can put a specific subscreen (a screen into a specific tab) or disable a screen. For all this cases you need tell how you access the message (for TA. CRM_DNO_MONITOR or TA. RNOTIFWL) because there are two diferents paths to configure in the IMG.
Regards
Issac Ohasi
SAP Solution Manager Consultant
São Paulo - Brazil -
send portfolio- how to customize adobe welcome screen for shared porfolio ?(Opening the link forces the recipient to a downright ugly irrelevant and dead advertisement (appropriately titled "branding logo.png) rather a related cover page)
Hi nedler1,
Please try the following steps to display the cover sheet and replace it with custom one:
How to change a portfolio’s initial view setting to show the cover sheet (and hide the contents):
Open a PDF portfolio and run the following JS in the console:
this.collection.initialView = 'Hidden';
Save the portfolio, close and re-open.
The cover sheet will now be displayed when opening the portfolio.
Updating the cover sheet
Also, most likely if you want the coversheet displayed when opening the portfolio, and do not want the default cover sheet:
Here are the steps to replace the default cover sheet:
Open the Portfolio.
Perform a View > Portfolio > cover sheet to open the cover sheet.
Open the Pages panel for the cover sheet.
Right click on the cover sheet page in the pages panel, select “Replace Pages”.
Replace the cover sheet page with the desired cover from a page in another pdf.
Save the portfolio.
Regards,
Rave -
My iPad screen has gone black. I have tried resetting it with the sleep and home buttons and it only flashes the apple on the screen for a nano second and then it goes black again. I can even hear notifications arriving, but I cannot see anything...I'd rather not reset it to the factory settings as I have a lot of things I worry about using. Either way seems to me that the system itself is working since I can hear it working, but its the screen that isn't. It has not been dropped and has been in a case for years! Please help!
When the power is on and I press the home button, I can slide my finger where the slider bar "would be" and it makes the noise as if its "opening" flashes a blue screen then returns black...
-
Customize Welcome Screen for Windows 7
Scenario
Windows 7 displays the Welcome screen which contains a list of available user accounts when the computer is a part of a workgroup or homegroup.
This article describes how to customize Welcome screen for Windows 7, and there are two display style for choice:
Logon screen
Last logon user and others
Summary
Method 1: Logon Screen
The Logon screen requires users to type a logon name rather than selecting an account from a list of available accounts.
Click Start, and type gpedit.msc in the Search to
launch Group Policy Editor;
Expand to the policy entry Computer Configuration\Windows Settings\Security Settings\Local Policies\Security Optionss;
Double-Click the policy Interactive logon: Do not display last user name, click
Enabled, and then click OK;
Click Start, and type cmd in the Search box. Right-click
cmd.exe in the Programs list, and then click
Run as administrator. Type gpupdate /force and press
Enter to refresh the Group Policy.
After logging off or switching user, the customized welcome screen will be as shown below.
Method 2: Last logon user and others
Click Start, and type gpedit.msc in the Search to
launch Group Policy Editor;
Expand to the policy entry Computer Configuration\Windows Settings\Security Settings\Local Policies\Security Options. Check the security setting
Interactive logon: Do not display last user name to be disabled.
Click Start, and type regedit in the Search to
launch Registry Editor;
Locate to keyHKLM\SOFTWARE\Microsoft\Windows NT\CurrentVersion\ProfileList;
Right-click on ProfileList, then click New>Key, name it
.default.
Restart you PC or refresh Registry Editor by pressing F5.
After logging off or switching user, the customized welcome screen will be as shown below:
Applies to
Windows 7 Professional
Windows 7 Enterprise
Windows 7 Ultimate
Windows 7 SP1 Professional
Windows 7 SP1 Enterprise
Windows 7 SP1 Ultimate
Please click to vote if the post helps you. This can be beneficial to other community members reading the thread.Another customization:
To give your logon screen corporate design or individual style you can follow these steps:
In registry editor navigate to the key "HKLM\Software\Microsoft\Windows\CurrentVersion\Authentication\LogonUI\Background".
Create a new DWORD value OEMBackground and assign value 1. (Value 0 resets to the original logon screen.)
In C:\Windows\system32\oobe\info create the folder backgrounds, if it does not exist.
Put your custom picture into this folder under the name backgroundDefault.jpg.
Attention: maximum supported file size is 256 KByte, so shrink them with a tool like Irfanview or Image Resizer Powertoy Clone.
If you want to use different pictures for different screen resolutions, you can do so by naming them backgroundXXXXxYYYY.jpg, i.e. background1920x1200.jpg for the resolution 1920 x 1200. If the resolution does not match any of the given file names, Windows
will fall back to backgroundDefault.jpg.
Best greetings from Germany
Olaf -
Addition of sub-screen for Functional Location / Equipment / Notification
Hi All,
Can any one help me on Addition of sub-screen based on config in new tab or sub-screen for objects for Functional Location / Equipment / Notification / Notification Item / Work OrderWork Order Operation.
If you are designed the above requirement by using ABAP objects please send sample code for the same.
I am not bothering about addtional fields which you created in your program.
Thanks a lot.
-KalluriThenna,
QMIH-ILOAN -> ILOA-ILOAN
ILOA-TPLNR -> IFLOT-TPLNR
PeteA
[www.pjas.com] -
User-exit for call new customize screen of another new program
Hello, I'm very appreciate for all who read this topic and give me some advice.
Anyone has an experience about customize standard program to create new screen
and add new screen to pop-up when user click some standard button to do something
for support business requirement and then continue to working the old step (such next old screen).
In QA11 (Manual UD), For posting stock quantity (After click button "Stock for inspection lot")
Business requirement need to avoid user to input stock quantity for unrestriced used (UR) and block
by after click button "Stock for inspection lot". Need to customize to pop-up new created screen for user
to choose sub-set of this inspection lot to post for UR or block by check box (Just overview)
Then after finish to select, Need to go back old screen ("Record UD : Stock" Screen) and default sum
of UR and block into screen (Automatic) for post to mvt.type 321, 350 later.
After checked, Not have any screen-exit after clicked button "Stock for inspection lot".
but i found 1 user-exit which was called after click above button.
So, Can i use user-exit to call new customize screen?
If need to go back from new customize screen to main screen, May have any problem? How to do it?
If finish to do in new customzie screen and need to continue display next old screen. How to do it in PAI of new customize screen.
Thank in advanceCan anyone provide the documentation for this BADI? Also, I'm concerned about the layout of the screen. Can this BADI do the necessary changes on the layout of the screen?
Thanks! -
I'm stuck on activation for imessage, I sign in but when it goes to verify email it gets stuck. The situation now is that the email verification screen for iMessages is not letting me access my regular msgs. Imessage has blocked my regular messages. I can only see msgs in notifications. Even in contacts the option for message contact has vanished. The phone is just stuck on the verify email screen and my mail is already verified by appleid. iv tried multiple working iTunes accounts but still no go.
Reset the phone (no data loss): press both the home and power buttons for at least 10 seconds, releasing when the Apple logo appears.
-
Can't drag icon from customize screen to tool bar on Dell Venue 8 Pro tablet.
On my Dell Venue 8 Pro tablet, win 8.1, I am unable to drag the 'download' (arrow) icon from the customize screen on to the tool bar.
I was able to drag the 'search' icon from the screen to the tool bar.
Why can I drag one, and not another?
Thanks,
WoodyBYou can click the "Restore Default Set" button to restore the default toolbar setup if there is a problem with customizing the toolbars.
You can check for problems caused by a corrupted localstore.rdf file if you continue to have problems.
*http://kb.mozillazine.org/Corrupt_localstore.rdf -
Job SM:SYNCHRONIZE USER DATA FOR NOTIFICATION canceled
Dear SAP Guru,
The BG job SM:SYNCHRONIZE USER DATA FOR NOTIFICATION is canceled every day and it´s
generating shortdump. Our system is SAP EHP1 for SAP Solution manager.
SAP ABA and SAP BASIS components are release 701 level 3.
ST is release 400 level 19
ST-PI is release 2008_1_700 level 1
ST-A/PI is release 01L_CRM570
Pls look on this shortdump.
Runtime Errors RAISE_EXCEPTION*
Date and Time 22.03.2010 06:50:11
|Short text |
| Exception condition "CUSTOMIZING_NOT_FOUND" raised. |
|What happened? |
| The current ABAP/4 program encountered an unexpected |
| situation. |
|What can you do? |
| Note down which actions and inputs caused the error. |
| |
| |
| To process the problem further, contact you SAP system |
| administrator. |
| |
| Using Transaction ST22 for ABAP Dump Analysis, you can look |
| at and manage termination messages, and you can also |
| keep them for a long time. |
|Error analysis |
| A RAISE statement in the program "SAPLDSWP_UTILITY" raised the exception |
| condition "CUSTOMIZING_NOT_FOUND". |
| Since the exception was not intercepted by a superior |
| program, processing was terminated. |
| |
| Short description of exception condition: |
| |
| |
| For detailed documentation of the exception condition, use |
| Transaction SE37 (Function Library). You can take the called |
| function module from the display of active calls. |
| - |
|How to correct the error |
| |
| If the error occures in a non-modified SAP program, you may be able to |
| find an interim solution in an SAP Note. |
| If you have access to SAP Notes, carry out a search with the following |
| keywords: |
| |
| "RAISE_EXCEPTION" " " |
| "SAPLDSWP_UTILITY" or "LDSWP_UTILITYU19" |
| "DSWP_GET_GLOBAL_CUSTOMIZING" |
| |
| or |
| |
| "SAPLDSWP_UTILITY" "CUSTOMIZING_NOT_FOUND" |
| |
| or |
| |
| "RDSWP_NM_SYNC_USER_DATA " "CUSTOMIZING_NOT_FOUND" |
| If you cannot solve the problem yourself and want to send an error |
| notification to SAP, include the following information: |
| |
*|
|System environment |
| SAP-Release 701 |
| |
| Application server... "crsgrant" |
| Network address...... "10.128.32.175" |
| Operating system..... "Windows NT" |
| Release.............. "5.2" |
| Hardware type........ "2x Intel 801686" |
| Character length.... 8 Bits |
| Pointer length....... 32 Bits |
| Work process number.. 13 |
| Shortdump setting.... "full" |
| |
| Database server... "CRSGRANT" |
| Database type..... "ORACLE" |
| Database name..... "SM1" |
| Database user ID.. "SAPSM1" |
| |
| Terminal.......... " " |
| |
| Char.set.... "Czech_Czech.28592" |
| |
| SAP kernel....... 701 |
| created (date)... "Apr 12 2009 22:43:15" |
| create on........ "NT 5.2 3790 Service Pack 1 x86 MS VC++ 14.00" |
| Database version. "OCI_10201_SHARE (10.2.0.4.0) " |
| |
| Patch level. 39 |
| Patch text.. " " |
| |
| Database............. "ORACLE 9.2.0.., ORACLE 10.1.0.., ORACLE 10.2.0.." |
| SAP database version. 701 |
| Operating system..... "Windows NT 5.0, Windows NT 5.1, Windows NT 5.2, Windows |
| NT 6.0" |
| |
| Memory consumption |
| Roll.... 8112 |
| EM...... 4181184 |
| Heap.... 0 |
| Page.... 24576 |
| MM Used. 873664 |
| MM Free. 170296 |
|User and Transaction |
| |
| Client.............. 001 |
| User................ "SOLMAN" |
| Language key........ "E" |
| Transaction......... " " |
| Transactions ID..... "C27635DF574FF121B0470050569757E9" |
| |
| Program............. "SAPLDSWP_UTILITY" |
| Screen.............. "SAPMSSY0 1000" |
| Screen line......... 6 |
|Information on where terminated |
| Termination occurred in the ABAP program "SAPLDSWP_UTILITY" - in |
| "DSWP_GET_GLOBAL_CUSTOMIZING". |
| The main program was "RDSWP_NM_SYNC_USER_DATA ". |
| |
| In the source code you have the termination point in line 22 |
| of the (Include) program "LDSWP_UTILITYU19". |
| The program "SAPLDSWP_UTILITY" was started as a background job. |
| Job Name....... "SM:SYNCHRONIZE USER DATA FOR NOT" |
| Job Initiator.. "SOLMAN" |
| Job Number..... 00104000 |
Have you some solution or advice?
Best Regards
JakubPlease could you check the following ?
- Please ensure that the latest version of note 1172948 has been implemented
- Please follow the recommendation in note 1314587.
- Check table 'DSWPGLOBALCUSTOM' and ensure that the entry 'DTMLOG' is available. Create the entry if missing.
These procedures will solve this issue. -
QM01 - Add new fields under SUBJECTS tab for notification type Q2
Hi Experts,
My requirement is to add 2 new fields to the create Quality Notification (QM01) Tcode under SUBJECTS tab for Notification type Q2.
I followed the following steps to achieve this :
[ SPRO -> Quality Mnanagement -> Quality Notifications -> Overview Quality Notification Types -> Then I selected Q2 and then selected dcreen structure for extended view -> Double clicked on 10\TAB02 ].
Now I arrived on the screen where we have to define the custom screen area and screen number.
But here in this case (Q2 notification type) all the 5 screen areas are already occupied , so where can I add my custom subscreen ??
Please refer to below screen shot for better understanding :
Please help ! Thanks in advance.
Kind Regards,
Ashish GoyalDear narendra bora
You can enter the more than two persons in but not on header screen. In operation you can make each seperate person responsible for each operation & that can be entered against each operation seperately. Also if operation is carried out by two person then also you can enter that in the form of split.
But it is not possible to enter two users in reported by field.
I hope this will resolve your issue.
Regards -
Work Manager 6.1: Adding custom field for notification creation
Hi,
I already added new fields in the past, and also in WM6.1 for fetch BAPIs, but now I'm trying to do it for the NotificationAdd Transaction and I'm not able to make it work. I guess I forgot some step but I don't know which, so I will describe what I did:
Agentry:
Added new field to the Notification object
Added new field to the NotificationAdd Transaction
Added new field to the NotificationAdd Detail Screen
Java:
Created class Notification.java extending com.syclo.sap.component.lam.notification.object.Notification
Added new field to the new Notifciation class
Copied constructors calling super method.
Override method setProperties(User u, NotificationPostBAPI bapi). Now is calling the super method and afterwards setting the new field. Here is where I have the error when I debug, the u.getString("transaction.Z_NewField")) i returning an empty string because it's not finding the value when reading from the transaction.
Created class NotificaitonPostBAPI extending from com.syclo.sap.component.lam.notification.bapi.NotificationPostBAPI.Override method setHeaderParameters to set the value in the ABAP structure for the new field after calling the super method.
Configuration Portal:
Changed global parameter to assign the customer NotificationPostBAPI class
Created global parameter to assign a BAPI wrapper to the new customer NotificationPostBAPI class
Change the global parameter to assign the class for Notification object in order to use the new customer class
Do you know why during the setProperties method created in Java, Step1 the transaction value for the Z field is empty? It seems I'm forgetting something quite simple here.
Thanks in advance.Hi,
May be the setter and getter methods, the value from transaction is not captured in the properties
public void setProperties(User u, NotificationPostBAPI bapi)
throws Exception
setABC(u.getString("transaction.notification.ABC"));
public String getABC()
return this.ABC;
public void setABC(String ABC)
this.ABC= ABC;
Regards,
Sravanthi -
Transaction CLM1 not allowed for notification type QL
Hello guys,
one of our user try to open the transaction CLM1/CLM2/CLM3 he getting error message Transaction CLM1 not allowed for notification type QL
please any one give solution for this issue.
find the error screen shot for your reference.
Thanks
SuryaHello Surya,
Have you done Basic configuration for Claims processing in SAP Project System.
SPRO > Project System > Claim > Notification - Claim > Notification creation
Also check config for Settings for Claims.
Refer sap help for more details
SAP Library - Claim Management
Regards
Tushar -
FB02 - Field KIDNO not on screen for credit doc (customer) / debit (vendor)
Hello,
I am trying to manually change field BDEG-KIDNO on transaction FB02.
I used custumization to make this field changeble when:
. Line item not cleared
. No invoice-related credit memo
I do not have the "Customer Debit or Vendor Credit" checked since I intended to change both debit and credit documents for customers and vendors.
When I used transaction FB02 to change this field I have no problems with debit documents on customers and credit documents on vendors but I cannot change it since the field BSEG-KIDNO does not appear on screen.
Is there any customization for whether field BSEG-KIDNO appears on screen for credit documents for customers and debit documents for vendors?
Any help will be appreciated.
Thank you
ElisabeteHello,
The field I want to change is BSEG_KIDNO not BKPF-XBLNR.
This field (payment reference) appears on the line item if customer debit document and vendor credit document but not if customer credit document and vendor debit document.
Thanks,
Elisabete
Maybe you are looking for
-
No Data Found: Exception in SQL inside PL/SQL block
Hi Friends I am trying to execute an SQL SELECT stmt inside a PL/SQL block. But when i execute the procedure, it gives me No Data Found Exception. I know it is because no row is fetched in the query, but the condition of the SELECT query i have speci
-
Iphone 5c won't turn on after a night of being charged. What happened and how do i fix it?
I had my phone on the charger all night to wake up this morning to it not turning on. I got this phone recently and havent done anything to it. Why wont it turn on and how can I fix this?
-
Can anyone tell me the correct method for deleting relationships within the repository using the API? It seems to me that deleting one end of a relationship would null-out the OTHER_RELATIONSHIP_END_REF value on the other end of the relationship and
-
How can I get Firefox to store the larger FLV Files in Cache ?
I use Cache Viewer Revisited to save cache files & for some reason larger FLV Files won`t store in the FireFox Cache... Even under "about cache" Large FLV Files show as 0 in size
-
So I downloaded the update from iTunes to avoid the sluggish download times, or so I thought. It downloaded in about 10 minutes and then I started to install it. At first it was the traditional black screen with the white logo and progress bar. Wh