Customize the MRP Screens

Dear All,
Please let me know whether we can customize the MRP Screens or control the flow of MRP screens. I have created a userdefined form for creating a Work Order using UDO. I wanted to know if we can include this screen in MRP wizard.
Regards,
Noor hussain

Noor,
I guess that it could be possible to get the output of the MRP wizard to a UDT, but to get that i guess u need to use the UI screen values, Please try it and check,
And to add work orders from the wizard i guess in the button click event of the MRP wizard u can try to add the work orders.
But i am a bit skeptical on how the above would work.
Hope it helps,
Vasu Natari.

Similar Messages

Is it possible to customize the halftone screen/angle used by the HP Laserjet 5000/5100

Hi
When sending an image to print on our 5000s and 5100s I'd like for the printer to apply a halftone screen of 85 (frequency) and 45 (angle). However, the driver properties only has two settings - Standard and Enhanced.
I took a look at the PPD and found the following:
*%=== Halftone Information =================
*ScreenFreq: "106.0"
*ScreenAngle: "45.0"
*ResScreenFreq 300dpi/300 dpi: "60.0"
*ResScreenAngle 300dpi/300 dpi: "45.0"
*ResScreenFreq 600dpi/600 dpi: "106.0"
*ResScreenAngle 600dpi/600 dpi: "45.0"
*ResScreenFreq 1200dpi/1200 dpi: "180.0"
*ResScreenAngle 1200dpi/1200 dpi: "45.0"
I had hoped that simply by changing the screen frequencies to "85.0" it would do the trick (since 85 does not appear to be outside of the printers' capability). However, it resulted in no changes to the prints. I know (or at least think) the changes were "seen" by the print driver because I changed some of the text that it uses in the property boxes of the print driver and those changes appeared (e.g. I changed "Standard" to "Standard 2" for one of the halftone descriptions).
My question is... can I customize the frequency/angle used or are these values fixed regardless of changes made to the PPD?
Thank you.
Mark

What was the answer to this excellent question, please?
Mark
Student
Posts: 1
Registered: 05-14-2009
0
Is it possible to customize the halftone screen/angle used by the HP Laserjet 5000/5100
Options
05-14-2009 06:56 AM
Hi
When sending an image to print on our 5000s and 5100s I'd like for the printer to apply a halftone screen of 85 (frequency) and 45 (angle). However, the driver properties only has two settings - Standard and Enhanced.
I took a look at the PPD and found the following:
*%=== Halftone Information =================
*ScreenFreq: "106.0"
*ScreenAngle: "45.0"
*ResScreenFreq 300dpi/300 dpi: "60.0"
*ResScreenAngle 300dpi/300 dpi: "45.0"
*ResScreenFreq 600dpi/600 dpi: "106.0"
*ResScreenAngle 600dpi/600 dpi: "45.0"
*ResScreenFreq 1200dpi/1200 dpi: "180.0"
*ResScreenAngle 1200dpi/1200 dpi: "45.0"
I had hoped that simply by changing the screen frequencies to "85.0" it would do the trick (since 85 does not appear to be outside of the printers' capability). However, it resulted in no changes to the prints. I know (or at least think) the changes were "seen" by the print driver because I changed some of the text that it uses in the property boxes of the print driver and those changes appeared (e.g. I changed "Standard" to "Standard 2" for one of the halftone descriptions).
My question is... can I customize the frequency/angle used or are these values fixed regardless of changes made to the PPD?
Thank you.

In Material Master Screen,functionally what is Mixed MRP in the MRP Screen.

In Material Master Screen,functionally what is Mixed MRP in the MRP Screen.Pls explain its functionality

THis indicator will define whether the material is available for the following....
Subassembly planning with final assembly
Gross requirements planning
Subassembly planning without final assembly

Windows 8, set default application for example adobe reader, customize the start screen

I have two questions, Im going to deploy Windows 8 to our company, but have 2 big issues.
1) I need to customize the start screen, but cant find anywhere in the gpo´s? How can I do this without sysprepping etc (deploying with SCCM2012 SP1)
2) I need to set the default programs for adobe reader, mspaint etc, how can I do this? It doesnt work with the GPP and folder options, anyone have done this?
Thanks in advance

Hi,
Thanks for posting your question in the forum. First of all, if you want to deploy customized Windows 8 Start Screen for domain users, I suggest we could refer to the following similar threads
and article.
Group Policy for Windows 8 Start
http://social.technet.microsoft.com/Forums/en-us/winserver8gen/thread/13a13c25-a1b2-4665-ab67-a2f9bc3b9bba
GPO Management for Windows 8 Start Screen?
http://social.technet.microsoft.com/Forums/en-US/W8ITProPreRel/thread/2d4bdcc6-3733-470e-939f-8b6eb0ef4492/
Windows 8 Start Screen Customization with MDT
http://blogs.technet.com/b/deploymentguys/archive/2012/10/26/start-screen-customization-with-mdt.aspx
Regarding the second question, since you want to set the default programs via Group Policy but it didn’t work. Would you please let me know how did you configure the setting? Please refer to
the following steps to configure the GPO setting.
To create a new Open With preference item
Open the
Group Policy Management Console. Right-click the Group Policy object (GPO) that should contain the new preference item, and then click
Edit.
In the console tree under
User Configuration, expand the Preferences folder, and then expand the
Control Panel Settings folder.
Right-click the
Folder Options node, point to New, and select
Open With.
In the
New Open With Properties dialog box, select an Action for Group Policy to perform.
Enter Open With settings for Group Policy to configure or remove.
Click the
Common tab, configure any options, and then type your comments in the
Description box.
Click
OK. The new preference item appears in the details pane.
For details, please refer to the following article.
Configure an Open With Item
http://technet.microsoft.com/en-us/library/cc732272.aspx
In addition, I suggest we could collect the following information to narrow down the cause of the issue.
GPMC.log
==================
a. On domain controller, click Start ->Run, type GPMC.MSC, it will load the GPMC console.
b. Right click on "Group Policy Result" and choose wizard to generate a report for the problematic computer and user account (please place appropriately). (Choose computer and select
the proper user in the wizard)
c. Right click
the resulting group policy result and click the "Save Report…" => save report to save the report to a HTML file.
Hope this helps.
Best Regards,
Andy Qi
TechNet Subscriber Support
If you are
TechNet Subscription user and have any feedback
on our support quality, please send your feedback here.
Andy Qi
TechNet Community Support

How to customize the login screen?

How can i customize the login screen of oracle applications 11.5.10.2 with say for example forgot pasword link or link to someother site..which web page do i need to edit? and what are the steps involved in it?
Thanks in advance
Rahman

I suggest you have a look at note: 404381.1
It is not about the main page itself, but it shows you how to customize jtflogin.jsp, like how to (Customize Login Page/Change the Logo/Add a Background Logo .. etc).
For customizing the login screen (AppsLocalLogin.jsp in 11.5.10.2), you can find this file under $COMMON_TOP/html

Customize the worklist screen

How can I customize the workflow worklist screen for our application? Or is there a PLSQL API that can return individual values like, start date, end date, status, subject of notification etc, so that I can create my own screen?

Yes, Just query the wf_worklist_v view and filter the contents as needed by your cusotm inbox. Here is an example were I queried based on username and priority.
select '<a href ="/pls/wf/wfa_html.detail?nid='||nid||'" target="_New">'||subject||'
</a>' Notifications, begin_date, due_date from wf.wf_worklist_v where status ='OPEN' and priority between :P1_PRIORITY_MIN and :P1_PRIORITY_MAX and to_user = :app_user

How to customize the selection screen of Get Objec

hi all,
I'm developing a program for sap hr.
I use the 'Get objec' to creat the selection screen.
and I wanna limit the date selection.
The defaut display is the 'Period' of radio-button group.
and I want only the single field 'Date' for input insead of a period with starting and ending dates (manuelly we need click on a button to switch to 'Date' input).
How can I switch automatically to the 'date' when I initilize my program?
Thanks a lot for your help
Yimin

Hi,
This is possible through program attributes.
goto attributes, click on 'HR Report category'
now make sure that, 'Master Data (Infotype)' is changed accordingly your requirement.
I think it is helpfull to you.
Regards
Sai

How can I customize the delivery screen layout?

Hi,
When I create delivery(T-code:VL01N),I want to some fields can not be modified.But I didn't find any IMG such as "field status".
How to do ?
Junyan He

Another extract i found on the net on SHD0
First
Link with screen shots [Click Here|http://www.mortenhjorthnielsen.dk/Security/transactionvariants.htm]
Second
Case one for creating Transaction Variants
Step 1:
Execute transaction SHD0 and create a Transaction Variant against the original transaction.
Step 2:
As soon as you press the create button, the original screen of the transaction will appear. After pressing any button/tab on the screen a menu variant screen will appear. Make sure to check any field or tab or any button you want to disappear from the menu functions. Press the exit and save button when you are sure that no further settings are required on sub-screens (if present). After pressing the exit and save button another menu variant screen will appear. Press the save button here and save as a local object or under any development class.
Step 3:
When you are back on the Transaction Variant (SHD0) screen, press shift+F6 or click the goto menu and press the create variant transaction button. Through this transaction SE93 will be executed. Enter the transaction name you want to create and any other required field and now press the save button.
Step 4:
Now execute the transaction you create through create Transaction Variant and enjoy the results.
Case two for creating Transaction Variants
Step 1:
Create a dialogue transaction through SE93 and enter the program name and screen number of the original transaction you want to make a variant on (e.g., PFCG). Press the save button and check whether the replica transaction (PFCG) has been created successfully by executing it on a new session.
Step 2:
Execute transaction SHD0 to create a Transaction Variant. Specify the transaction name (replica of PFCG) which you have just created and create a Transaction Variant against the replica transaction.
Step 3:
As soon as you press the create button, the original screen of the transaction will appear. After pressing any button/tab on the screen a menu variant screen will appear. Make sure to check any field or tab or any button you want to disappear from the menu functions. Press the exit and save button when you are sure that no further settings are required on sub-screens (if present). After pressing the exit and save button another menu variant screen will appear. Press the save button here and save as a local object or under any development class.
Step 4:
When you are back on the main screen of the SHDO (Transaction Variant) click the edit option on the menu tab and activate Standard Variant. Through this a Standard Variant will be assigned to the transaction specified (replica transaction).
Note: Make sure you activate the Standard Variant against a replica transaction and not on the original one.

How to customize the Selection Screen of Logical DB (PNP)?

Hi All,
In LDB selection screen
PERNR field is not given in ranges and also
Personal area and subarea are given in single selection field.
I need to customize this for my report.
Plz guide me reg this.
Thx in advance.
Albert

-Go to se38 "Give program name " and click "Attributes" ...
- After that click HR report Category " a pop-up will come again git report category Here you can create the filds and can attach report category with your program .
You`ll find more help if you search "create report category on SDN or google ...
Here you go
http://www.atomhr.com/know_preview/hr580_Cust_sel_screen_chp1_46.htm
Hope thisll give you idea!!
Pl... award the points.
Good luck
Thanks
Saquib Khan
"Some are wise and some are otherwise"
PS.
Put yourself on the SDN world map (http://sdn.idizaai.be/sdn_world/sdn_world.html) and earn 25 points.
Spread the wor(l)d!

How to customize the search screen of InputListoFValues

I have a requirement where i have InputListofvalues, i click on serach icon and see the popup with serach panel and table.
I want to customize that search panel,i need to have simple serach dont want those advance feature like Match all , advance search,
Any idea on this.
Thanks
RJ
Edited by: 897575 on Jul 17, 2012 7:42 AM

Hi,
See if this helps.
http://ramadf.blogspot.in/2011/01/how-set-richinputlistofvalues-button.html
-Arun

How customize the Login Screen

I have put a login portlet on my portal homepage and set it as the default homepage. but when i try to get on it by URL, it always bring me to sigle sign on page to login.
can anybody tell me how to set this homepage to be login screen?
thanks a lot!!

Hi,
Make this page the default home page for the public user. This way this page will be the first page before login.
Thanks,
Sharmila

Customize the co01 screen

hello experts,
In oracle system there is a field in oracle named Job Cart number , for every Job Cart number a production order is created in sap.
Now our requirement is while creating production order , system should allow him to enter a Job Cart number so that in future he can refer with co02, i.e, when he give the Production order then it should display the Job Cart number with other regular details.
So how to enter Job cart number while creating production order, what are the customizations should be done to do this.
Instead of customizing more we are thinking that we will enter Job cart number in a standard field which was desined by sap for other purpose , so that it may serve our purpose.
regards,
Krishna mohan.

dear jiaul haque,
With this my purpose will be solved , but one thing is will there be any negative effect in future . Can you elaborate what is the actual purpose of Sequence number field given by SAP.
regards,
krishna mohan

In Material Master Screen,functionally what is Requirement Group in the MRP

In Material Master Screen,functionally what is Requirement Group in the MRP Screen.Pls explain its functionality

Hi,
The safety time / actual range of coverage ensures that the planned warehouse stock covers the requirements of a defined number of days. It therefore serves as a time float and thus works alongside the safety stock, which acts as quantity float.
The system simulates bringing the requirements forward by the specified number of days and the planning for the receipts, created for these requirements in the planning run, is also brought forward by this number of days.
Prerequisites
·   You have set the Safety Time indicator in the material master record (MRP 2 View) to define whether the safety time is only to apply to independent requirements or to all requirements.
·    In the material master record (MRP 2 View), in the Safety Time/Actual Range of Coverage field, you have entered the number of workdays by which the requirements are to be brought forward.
·    If, in addition to this actual range of coverage, you also want to define a different number of workdays in certain periods or a safety time less than one day then, in Customizing for MRP in the activity Define Period Profile for Safety Time/Actual Range of Coverage you can define a period profile and assign it to the material in the material master record.
Regards,
Vijay

Which tools to customize the EBS Web Screen

Hi,
I have implement EBS R12 but I would like to know which tools to customize the Web Screen. I know that the Oracle Developer can customize the Form Screen.
Or have anyone else please recommend which Oracle course training that should learn to customize Web Screen.
Thank in advance,
Chuyot

Hi;
I suggest check forms&reports course:
Oracle Forms & Reports Developer 10g: Move to the Web
http://education.oracle.com/pls/web_prod-plq-dad/db_pages.getCourseDesc?dc=D17362GC10&p_org_id=12&lang=US
Also see:
http://education.oracle.com/pls/web_prod-plq-dad/db_pages.getpage?page_id=16&group_id=1154&p_org_id=1001&lang=US
Regard
Helios

Customizing the Home Screen Status Bar

I know right now that the ability to customize the home screen is more or less limited to the arrangement of the icons, right?
What I want is the ability to place a 'new mail' or 'new sms' icon at the top of the home screen, along the status bar where the time and signal strength are currently displayed.
That way I can see at a glance if I have new messages, even when the phone is locked, by hitting the unlock button at the top of the phone.
Luckily the SMS preview gives me that status, but I still need to manually unlock the phone with the passcode before I can see if I have any new email. I don't use an audible alert for incoming email.
I'd also prefer the option to have new sms messages neither display a preview nor even display a name on the home screen.
In short, I want more control over the behavior and display of the home screen. I've seen some rumblings that the Apple SDK disallows interaction with the home screen. If so, iPhone users are completely at the whim of Apple to include new home screen functionality.
I'm not happy with that arrangement.
Coming from the Windows Mobile word, I'm finding Apple to be a very closed system. I knew ahead of time that there would be some diminished flexibility, but I didn't expect this much of a drop.

Apparently you do not have a question, but it seems that you have some feedback for Apple. As this is a users forum, populated by iphone users -not Apple, perhaps you need the address for feedback that Apple does receive:
www.apple.com/feedback/iphone.html

Customize the MRP Screens

Similar Messages

Maybe you are looking for