Customize the parental control error message page for Linksys E45000

Is there I can customize the error page which is shown when someone visits a blocked site

I'm afraid it doesn't have that feature. This router was not designed to have that feature.

Similar Messages

HT2900 what if the parental control is eabled for administrator, how to disable the parental control?

I tried to disable the parental control for the administrator, but after reboot, the parental control is still enabled for administrator.

1st option
Try to log on on an another admin account on your Machine and change that.
2nd option
if there is no other admin you have to create a new user as an admin.
Reboot. When the screen goes black hold "command- s" to enter in Single user mode
type /sbin mount -uw /
its /sbin(space)mount(space)-uw(space)/
then enter
type rm /var/db/.AppleSetupDone
its rm(space)/var/db/.AppleSetupDone
enter
Type Reboot
enter
The system, will restart with like setting up a new machine (dont worry your user files are not deleted)
set up a new account. then after that check teh user accounts on system prefrences. remove managed and boot on to your pervious user.
After managing to make your Previous usre an admin delete the other extra user that you created
Try to enable firmware password so that you can only do that to your machine. http://support.apple.com/kb/HT1352
Turn on Filevault to protect your files. http://support.apple.com/kb/PH7033

What happened to the parental controls page

I have not had occasion to mess with any parental controls recently until today. I had the page bookmarked that allowed me to control what email addresses my minor child could send and receive email to/from and that page is gone. I cannot for the life of me find anywhere on this site where to adjust parental control settings. I now have another minor child for whom we've created a sub account for and I have no way of controlling what email is allowed in. Why I try to go to Manage Sub Accounts I get an error message that that page no longer exists. Argh! I've been fooling with this site and the Verizon Yahoo site for over an hour. Where is the parental controls page that actually lets me set the parameters?!

Thank you. That does the trick.
As a suggestion, you might want to put something in the tool tip for that star, saying that double click opens controls.

Attempting to upgarde itunes and I get an error message looking for "an alternate path to a folder containing 'iTunes.msi' location. I've searched my hard drive and the file doesn't exist. What to do?

Attempting to upgarde itunes and I get an error message looking for "an alternate path to a folder containing 'iTunes.msi' location. I've searched my hard drive and the file doesn't exist. What to do?

This worked...found on a prior discussion:
Download the Windows Installer CleanUp utility from the following page (use one of the links under the "DOWNLOAD LOCATIONS" thingy on the Major Geeks page)...
http://majorgeeks.com/download.php?det=4459
From the link above (near the top of the page)....Under 'download locations' click on 'download@majorgeeks'
To install the utility, doubleclick the msicuu2.exe file you just downloaded and ran.
Now run the utility ("Start > All Programs > Windows Install Clean Up"). In the list of programs that appears in CleanUp, select any iTunes entries and click "Remove", as per the following screenshot:
Restart your computer.
Re-download Itunes (latest version form Itunes website) and install. It worked!

Customize Error Message Page - Oracle Portal

Hi,
Please how i can customize Error Message Page ? or just the page not found ?
tks
carlo

This is documented in the Portal admin guides.
Make a copy of the standard error page (in the navigator) then change the portal configuration (in builder) and tell it to use your own page.

Customize Error Message Page

Does anybody know how to customize Portal Error Message Page?
Thanks

This is documented in the Portal admin guides.
Make a copy of the standard error page (in the navigator) then change the portal configuration (in builder) and tell it to use your own page.

My iphone 3GS no longer syncs with iTunes. The phone is recognised, backs up but then I get an error message: "Waiting for changes to be applied". BUT unlike other people, it doesn't stay stuck on it, instead the process closes down immediately

Hi all,
Apologies: I've just joined the community and didn't quite figure how to write a msg! Hope it works...
Anyway,
I read many posts on this annoying error message (Waiting for changes to be applied) in the last 2/3 days, but they all refer to the sync staying stuck on it.
Mine doesn't.
I read the message, then it quickly shuts down the sync and the iTunes progress bar only shows the apple...
As suggested by many, I removed voice msgs, turned off/on, tried to sync in individual stages (calendar only...) but nothing works.
I am up to date on iTunes (11.1.1.11) and have IOS 6.1.3 on my phone, to sync on a Win8 pc (all worked fine until recently).
I have had this phone for several years and it has never done this.
It worked absolutely fine, until I loaded the latest version of iTunes it seems...
Any suggestions?
Many thanks

ALSO, on the iPod under Settings>General>iTunes Sync, you may need to back out of the "iTunes Wi-fi Sync," and reopen it to get it to update.
(I use iTunes 11.1.5.5)

I have a problem syncing iCal on my Macbook air (10.7.5) and my iPhone 4s (5.1.1) over iCloud. The following server error message comes up "The request (CalDAVAccountRefreshQueueableOperation) for account "iCloud" failed." Been to Apple - no luck. Ideas?

I have a problem syncing iCal on my Macbook air (10.7.5) and my iPhone 4s (5.1.1) over iCloud. The following server error message comes up "The request (CalDAVAccountRefreshQueueableOperation) for account “iCloud” failed." Been to Apple Store - no luck instore, or with Super genius over the phone when with genius in store, taking data in real time via ethernet!
I had to do a full wipe of my system because of time machine back up issues 2 weeks ago, and the error has only occured at some point since then. I only did a drag and drop of my user account folders/files into an External HDD rather than a copy of my user account (advised by the staff in store at Apple to do this) and when reimported, the Mail folders are all present but each message is in a sub-sub-sub folder that is numerically named. I do not have a mirror image of the hard disk prior to the wipe, only a time machine back up from 2 weeks prior to it being done. I am uncertain if this reinstall has caused the issue.
I am not happy to upgrade the software in my iPhone until I have the calendars working. I have purchased Mountain Lion, but again am concerned about upgrading until the issues are sorted.
I have tried the other solutions on here with no luck. HELP please.
Many Thanks.

Progress Update.
I made a back of what existing phtos and Videos I had on my Iplhone. I used Image capture to do this making an entire back up of photos and videoa that were still intact on the phone.
Image capture is god for this purpose, as it does exactly what you ask it to do without applying any rules or squishing the files back into iphote (which might also be corupted)
Image capture wil do the basic function of retriving the contents of the phone and save them as native files on your hard drive.
Once I did this I erased my iphone, and re intitialised it restoring an older back up from icloud.
As the retore was happneing - I did retreive the missing files that cuased the intial beviour as above, and I could play the videos that were missing in the above scenerio. The wierd ting was however that even though the source files were now back on the device, the thumbnail previews were missing. Where I ahd balck thumb nails for server portions of the resotred content.
I then went to bed as the restore is a long process. When I woke up the library had library had cleaned itself up. Mysteriously the prcess had deleted the files missing the their thumbnails.
This is very perculiar and bad behavior.
I am now repeating the process, and will attempt to download the missing content as it is restored and prior to the phone trying to fix itself.
Here are the lessons learned.
DO NOT rely on Photo Stream to keep back ups and synchornise videos from you IOS device. IT DOES NOT SUPPORT THIS CAPBILITY
DO NOT rely on iCloud Back Up alone - always fd an occassional iTunes back up or more reliably still always take a back up of photos and video files using Image Capture to be doubly sure that you a have backd up any content.
DO THIS NOW - dont wait to loose your phone ofr have your phone repaired by replacement at the apple Store. (I did both :-(

I started the newest update for my phone but when it started installing it to the phone, a error message showed up and now my phone is stuck in recovery mode and itunes wont recognize it. what do i do?

started the newest update for my phone but when it started installing it to the phone, a error message showed up and now my phone is stuck in recovery mode and itunes wont recognize it. what do i do?

Any numbers or other details on the mesages given?
Did you try to connect in recovery mode again? iOS: Unable to update or restore
In case your network connection timed out, check your security software settings: iTunes for Windows: Troubleshooting security software issues

When i attempt to download a 'free' app from the app store error message comes up: "Account Not in this store- your account is not valid for use in the US store. You must switch to the Guyanese store before purchasing."

when i attempt to download a 'free' app from the app store error message comes up: "Account Not in this store- your account is not valid for use in the US store. You must switch to the Guyanese store before purchasing."

Change App Store
1. Tap "Settings"
2. Tap "iTunes & App Stores"
3.Tap "View Apple ID"
4. Enter your user name and password.
5. Tap "Country/Region."
6. Tap "Change Country/Region"
7. Select the region where you will be located.
8. Tap "Done".

Had to restore my iMac from Time Machine. After the restoration all programs are functioning except my Adobe Creative Suite 4 Design Premium. When I start any program in the suite the error message, "Licensing for this product has stopped working." I rest

I had to restore my iMac from Time Machine. After the restoration all programs are functioning except my Adobe Creative Suite 4 Design Premium. When I start any program in the suite the error message, "Licensing for this product has stopped working." I restarted the computer and tried again to run Photoshop and the same error message appeared. The message was followed by a message that stated that I needed to contact Adobe technical support and mention Error: 150.30. I need Adobe technical support to provide me a solution for my problem so I can continue using my Adobe products installed on my computer.

Unfortunately when Adobe products are restored from backup, especial CS4 and especially Mac, it breaks licensing.
There is a python script included in the license recovery kit that should work if you are familiar with Terminal.
If not, you must reinstall your CS4 suite. You don't need to delete your preferences, so it should be the same as before.
Error "Licensing has stopped working" | Mac OS
Gene

Trying to launch photoshop cs3 on a mac running OS10.6.8 i keep getting the error message: Licensing for this product has stopped working you cannot use this product at this time. You must repair the problem by uninstalling and then reinstalling this pro

trying to launch photoshop cs3 on a mac running OS10.6.8 i keep getting the error message: Licensing for this product has stopped working you cannot use this product at this time. You must repair the problem by uninstalling and then reinstalling this product or contacting your IT adminstrator or Adobe customer support for help
I already Uninstalled and reinstalled the product and it still does not work.

Hi,
Try to uninstall the software again and you have to manually
Delete the following folders:
[Startup Disk]/Library/Application Support/Adobe/Adobe PCD
[Startup Disk]/Library/Application Support/Adobe/caps
[Startup Disk]/Library/Application Support/Adobe/backup
[Startup Disk]/Library/Preferences/FLEXnet Publisher/
[Startup Disk]/Library/Application Support/FLEXnet Publisher/
Go to Applications-->Utilities-->Disk Utility, Open it and Select the MAC HD and then click on Repair permissions.
After that try to run the cleaner tool as mentioned by kglad.
Restart machine and then try to install again.
*** Make sure , you only delete these folders if there is no other adobe applications installed on the machine. As if you have any other Adobe application of the suite ( not free applications ) then it will be a problem.

For some reason when I shut down my computer then turn it back on, it comes back directly into my account, bypassing having to enter a password to get into my account. This works in direct conflict with the parental controls I've got set up. Any ideas?

For some reason when I shut down my computer then turn it back on, it comes back directly into my account, bypassing having to enter a password to get into my account. This works in direct conflict with the parental controls I've got set up. Any ideas?

Thank you so much for the quick response to my question. I tested your directions and it works!! Thank you. I would never have figured that out. I knew I had to go into System Preferences but would not have guessed that I needed to have Automatic Login set to off.

HT1904 if i purchased my device with my money is it legal for someone else to put on the parental controls?

if i purchased my device with my money is it legal for someone else to put on the parental controls?

That is an interesting question. If you are at the "age of majority", then why would you allow someone else to put restrictions on your device.. If it is a condition of your employer to use the device on their network services, then you allow it to use the device for their system. If you are under the age of majority, and your parents are requiring it, sounds like the parents care.

Modidy the Web Dispatcher Error message

Hi,
Where do we modify the web dispatcher error message "500 Dispatching error" to a cutome message on the J2EE?
Thank you.

note says:
Customization of 500 Internal Server Error
This response code is returned when there is a problem with the application or the server. Any not handled Exception or Error triggers the return of response with code 500.
To return different content on error occurance, you need to handle the error by inserting the appropriate declaration in web.xml.
Sample declaration for handling of test.MyApplicationException occurances in the application scope:
<error-page>
    <exception-type>test.MyApplicationException< /exception-type>
    <location>/customerrors/MyApplicationException.jsp</location>
</error-page>
           Note1: For each error condition you need to handle (application exception use a separate error page. For all other exceptions use a global error handling definition for java.lang.Throwable.
However you must be aware of the following:
In case java.lang.OutOfMemoryError appears the subsequent behaviour of the JVM is undefined and this may lead to unpredicatable effects. Therefore the webcontainer will not pass such error to the error page for handling.
If the following general definition
<error-page>
    <exception-type>java.lang.Throwable< /exception-type>
    <location>/customerrors/WhateverProblem.jsp</location>
</error-page>
is in place, then the error handler resource is responsible for logging the error condition.
This means the resource handling general problems if such is declared must be dynamic (a JSP page or a servlet not HTML page)
           Note2: Exceptions are searched in order of appearance in web. xml and not determining closest in class hierarchy.
           This is true for all patchlevels of J2EE Engine 6.20 and versions of J2EE Engine 6.40 lower than SP11.
Therefore if test.ChildException extends test.ParentException extends java.lang.Exception and
<error-page>
   <exception-type>test.ParentException</exception-type>
<location>/customerrors/ParentException.jsp</location>
</error-page>
<error-page>
<exception-type>test.ChildException</exception-type>
<location>/customerrors/ChildException.jsp</location>
</error-page>
is specified in the web.xml of the application as exceptions are searched in order of appearance regardless if ChildException or ParentException is thrown, the call will be directed to /Customerrors/ParentException.jsp because ChildException is a subclass of ParentException..
Working mapping would be :
<error-page>
<exception-type>test.ChildException</exception-type>
<location>/customerrors/ChildException.jsp</location>
</error-page>
<error-page>
<exception-type>test.ParentException</exception-type>
<location>/customerrors/ParentException.jsp</location>
</error-page>
so you need to switch the declarations in the web.xml (effective on next start of the application).
BR, Oliver

Customize the parental control error message page for Linksys E45000

Similar Messages

Maybe you are looking for