Customize the Response Message for Resource Scheduling - Sent by Microsoft Exchange Server 2010

We have a room mailbox and when one books it the organzier gets response with the following and the very botoom:
Sent by Microsoft Exchange Server 2010
I want to remove it as I dont want anybody to know what mail server we are running? thankx

Hi,
As what Andy says, it is by default and there is no method to remove it.
Sorry for any inconvenience.
Regards,
Winnie Liang
TechNet Community Support

Similar Messages

Is it posible to customize the"RESOLVER.ADR.RecipLimit; too many recipients " NDR in Exchange Server 2010?

if using recipient limits, is it possible to customize or at least reduce the following NDR. If we have the limit set to say50 and someone tries to send to 100, each individual address will be listed, i.e.:
[email protected]
#550 5.5.3 RESOLVER.ADR.RecipLimit; too many recipients ##
user2#domain.com
#550 5.5.3 RESOLVER.ADR.RecipLimit; too many recipients ##
[email protected]
#550 5.5.3 RESOLVER.ADR.RecipLimit; too many recipients ##
Can this be suppressed or reduced to only say This message wasn't delivered to anyone because there are too many recipients. The limit is 50. This message has 100 recipients.

Hi,
I have a test in my environment using Exchange 2010. You can use the following cmdlet to change the text to "This message wasn't delivered to anyone because there are too many recipients. The limit is 50. This message has 100 recipients."
New-SystemMessage -DsnCode 5.5.3 -Language en -Internal $true -Text "This message wasn't delivered to anyone because there are too many recipients. The limit is 50. This message has 100 recipients."
Here is the result for your reference.
Based on my knowledge, I'm afraid that the following information can't be changed.
Hope it helps.
Best regards,
Amy Wang
TechNet Community Support

Is there any Collector for Microsoft Exchange Server 2010?

Dears All,
Sentinel currently provide only Microsoft Exchange Server 2007 SP1,
But our customer exchange version is exchange 2010, Is there any
Collector for Microsoft Exchange Server 2010? Thanks!
steve_zeng
steve_zeng's Profile: https://forums.netiq.com/member.php?userid=3875
View this thread: https://forums.netiq.com/showthread.php?t=46984

steve_zeng;226167 Wrote:
> Dears All,
>
> Sentinel currently provide only Microsoft Exchange Server 2007 SP1,
> But our customer exchange version is exchange 2010, Is there any
> Collector for Microsoft Exchange Server 2010? Thanks!
There's a pre-release build of the exchange collector available for
2010, just contact NTS.
If you need a full formal release, we're looking to have 2010 and 2013
support by approximately mid-year.
brandon.langley
brandon.langley's Profile: https://forums.netiq.com/member.php?userid=350
View this thread: https://forums.netiq.com/showthread.php?t=46984

Microsoft Exchange Server 2010 SP3 update to Update Rollup 8-v2 for Exchange Server 2010 SP3

i have Microsoft Exchange Server 2010 SP3 and i would like to update to Update Rollup 8-v2 for Exchange Server 2010 SP3.
what is the best way to do so?
my current env:
Name : xxxxxxxx
Edition : Standard
AdminDisplayVersion : Version 14.3 (Build 123.4)
ServerRole : Mailbox, HubTransport
Site : domain/Configuration/Sites/xxx
Name : yyyyyyyy
Edition : Standard
AdminDisplayVersion : Version 14.3 (Build 123.4)
ServerRole : Mailbox, ClientAccess, HubTransport
Site : domain/Configuration/Sites/yyy
Name : cccccccc
Edition : Standard
AdminDisplayVersion : Version 14.3 (Build 123.4)
ServerRole : Mailbox, ClientAccess, HubTransport
Site : domain/Configuration/Sites/ccc
Name : dddddddd
Edition : Standard
AdminDisplayVersion : Version 14.3 (Build 123.4)
ServerRole : ClientAccess
Site : domain/Configuration/Sites/ddd
Name : iiiiiiii
Edition : Standard
AdminDisplayVersion : Version 14.3 (Build 123.4)
ServerRole : Mailbox, ClientAccess, HubTransport
Site : domain/Configuration/Sites/iii
thanks
Mayson

Consider referring to the articles below and that explains it all.
Install the Latest Update Rollup for Exchange 2010 - https://technet.microsoft.com/en-us/library/ff637981.aspx
Applying Service Pack and Rollup Updates on Exchange Server 2010 (Part 1) - http://www.msexchange.org/articles-tutorials/exchange-server-2010/management-administration/applying-service-pack-and-rollup-updates-exchange-server-2010-part1.html
Pavan Maganti ~ ( Exchange | 2003/2007/2010/E15(2013)) ~~ Please remember to click “Vote As Helpful" if it really helps and "Mark as Answer” if it answers your question, “Unmark as Answer” if a marked post does not actually answer your
question. ~~ This Information is provided is "AS IS" and confers NO Rights!!

Installing the connector for microsoft exchange server 2010

Hi All,
We have installed AD connector 9.1.1.7.0 with OIM 11.1.1.5.0.
Now Team is upgrading to Microsoft 2010 exchange server. As of now there is no direct provisioning for microsoft exchange server.
Now we are trying to install connector for microsoft exchange and do the provisioning.
So, what is the connector version should i use Microsoft 2010 exchange.
can i install 11.1.1.5.0.Any help would be appreciated.
Also please provide the minimum details which are required to connect to target exchange server or please suggest us some doc.
Thanks in Advance.

Hi Rajiv,
Thanks for the reply. Can you please tell which version of connector i have to download?
Thanks In Advance

Customize the "update message" for Java Web Start

For the default value (false) of silentInstallLicenseAcceptance in Java Web Start when an application's server side has changed, the user will be asked with a message box whether he/she wants to update his local application now or quit the application.
I would like to know if I can manipulate the message that Java Web Start should ask the user. I also would like to know if I can change the button from Yes/No to Upgrade Now and Upgrade Later.
Any API reference, idea, tutorial or sample code would be appreciated.

I'm pretty sure that list is not accurate for the Java Web Start released in Update 4 recently. I have an app which attempts to specify heap and stack sizes using java-vm-args="-Xmx1024m -Xms1024m -Xss8m"; when I use the Java console to display memory usage, it shows that the heap is 81MB (which is the default). If I use initial-heap-size="1024m" max-heap-size="1024m" in the same JNLP file, the heap size is set properly.
Unfortunately I don't think there's any way other than -Xss to set the stack size in a JNLP file, and I need to do that too.
It's also possible that I screwed something up which caused this problem, but I reproduced it on both my Mac Pro and my Macbook Pro.

Documentation for getting Webcenter PS4 to work with Exchange Server 2010.

I have a customer who has Microsoft Exchange Server 2010 and wants to have their e-mail in WebCenter Spaces app we have built, using 11.1.1.4 or 11.1.1.5. Do either of these support Xchange Server 2010? Probably not, right? Well has anybody done it and been able to get it to work? Is there any documentation out there that tells how to do it?
Thanks,

This documentation is great. Thanks,
Is there any documentation on this for 11.1.1.6? (PS5)? The documentation you gave me is 11.1.1.5 and it shows Exchange Server 2007. My customer has Exchange Server 2010. Do you know if 11.1.1.5 and/or 11.1.1.6 supports Exchange Server 2010?
Again, thanks for your help.

JDBC- RFC- JDBC Synchronous scenario (Can't see the response message)

Hello Experts,
I tried this step in creating a synchronous scenario by using steps found in this site -> [http://wiki.sdn.sap.com/wiki/display/XI/File-RFC-File%28Without%20BPM%29|http://wiki.sdn.sap.com/wiki/display/XI/File-RFC-File%28Without%20BPM%29] I just changes File to JDBC. But problem is I see the sent XML message in SXMB_MONI but to response message. I also can't see the Sender interface name for the response message when I tried to use F4 in the Interface Name portion.
Do someone encountered this before? Please help
Regards,
Alfred

Hello,
I hope someone could guide me on how to set this up cause I only see the sent message but there's no response message in SXMB_MONI. Note that interface was successful, I just want to see what was sent by the response.
Regards,
Alfred

Error consuming Web service - content type text/xml;charset=utf-8 of the response message does not match the content type of the binding

Hi all,
We are trying to interact with Documentum server through DFS exposed WCF which communicates through port 9443 and we are provided with documentum issued Public Key certificates. We have successfully imported the certificates in client machine and configured
the bindings as below in our .Net web application config file.
<system.serviceModel>
<bindings>
<wsHttpBinding>
<binding
name="ObjectServicePortBinding1">
<security
mode="Transport">
<transport
clientCredentialType="None"
proxyCredentialType="None"
realm=""
/>
<message
clientCredentialType="Certificate"
algorithmSuite="Default"
/>
</security>
</binding>
<binding
name="QueryServicePortBinding">
<security
mode="Transport">
<transport
clientCredentialType="None"
proxyCredentialType="None"
realm=""
/>
<message
clientCredentialType="Certificate"
algorithmSuite="Default"
/>
</security>
</binding>
</wsHttpBinding>
</bindings>
Also, we set the message encoding as MTOM and the wcf client object initialization code snippet is as below,
ObjectServicePortClient
serviceClient = new
ObjectServicePortClient(new
WSHttpBinding("ObjectServicePortBinding1"),
new
EndpointAddress(UriUtil.ObjectServiceUri));
if (serviceClient.Endpoint.Binding
is
WSHttpBinding)
   WSHttpBinding
wsBinding = serviceClient.Endpoint.Binding as
WSHttpBinding;
wsBinding.MessageEncoding =
"MTOM".Equals(transferMode) ?
WSMessageEncoding.Mtom :
WSMessageEncoding.Text;
serviceClient.Endpoint.Behaviors.Add(new
ServiceContextBehavior(Config.RepositoryName,
Config.DocumentumUserName,
Config.DocumentumPassword));
When we execute the above code, we are getting error message as below,
Exception: The content type text/xml;charset=utf-8 of the response message does not match the content type of the binding (multipart/related; type="application/xop+xml"). If using a custom encoder, be sure that the IsContentTypeSupported
method is implemented properly. The first 407 bytes of the response were: '<?xml version="1.0" ?><S:Envelope xmlns:S="http://schemas.xmlsoap.org/soap/envelope/"><S:Body><S:Fault xmlns:ns4="http://www.w3.org/2003/05/soap-envelope"><faultcode>S:VersionMismatch</faultcode><faultstring>Couldn't
create SOAP message. Expecting Envelope in namespace http://schemas.xmlsoap.org/soap/envelope/, but got http://www.w3.org/2003/05/soap-envelope </faultstring></S:Fault></S:Body></S:Envelope>'
Then, we changed the bindings as below
<system.serviceModel>
<bindings>
<wsHttpBinding>
<binding
name="ObjectServicePortBinding1">
<security
mode="Transport">
<transport
clientCredentialType="Certificate"
proxyCredentialType="None"
realm=""
/>
<message
clientCredentialType="Certificate"
algorithmSuite="Default"
/>
</security>
</binding>
<binding
name="QueryServicePortBinding">
<security
mode="Transport">
<transport
clientCredentialType="
Certificate"
proxyCredentialType="None"
realm=""
/>
<message
clientCredentialType="Certificate"
algorithmSuite="Default"
/>
</security>
</binding>
</wsHttpBinding>
</bindings>
We are getting another error message,
Exception: The client certificate is not provided. Specify a client certificate in ClientCredentials.
Any pointers on resolving this issue would be highly helpful.
Thanks

Hi Dhanasegaran,
As per your case, the corresponding details which may guide you to resolve this issue:
1. First of all, you can try to call the wcf service directly from the browser & check where it will point out the correct location.
2. In config file ,Set IncludeExceptionDetailInFaults to true to enable exception information to flow to clients for debugging purposes .
Set this to true only during development to troubleshoot a service like below :
<serviceBehaviors>
<behavior name="metadataAndDebugEnabled">
    <serviceDebug
      includeExceptionDetailInFaults="true"
/>
    <serviceMetadata
      httpGetEnabled="true"
      httpGetUrl=""
/>
</behavior>
</serviceBehaviors>
3. I suggest you to change that <security mode ="TransportWithMessageCredential"> instead of <security mode ="Transport">
for more information, refer the following link :
https://msdn.microsoft.com/en-us/library/aa354508(v=vs.110).aspx

The content type of the response message does not match the content type of the binding

I have written an ASP.Net web service which returns english,chinese and portuguese data. Everything seemed working fine until the method retunred only english data. The moment it returns english, chinese and portuguese data I get the error:
The content type text/html; charset=utf-8 of the response message does not match the content type of the binding (text/xml; charset=utf-8). If using
a custom encoder, be sure that the IsContentTypeSupported method is implemented properly. The first 1024 bytes of the response were:
'<!DOCTYPE html> <html>     <head>         <title>Runtime Error</title>
        <meta name="viewport" content="width=device-width" />         <style>          body {font-family:"Verdana";font-weight:normal;font-size:
.7em;color:black;}          p {font-family:"Verdana";font-weight:normal;color:black;margin- -5px}          b {font-family:"Verdana";font-weight:bold;color:black;margin-
         H1 { font-family:"Verdana";font-weight:normal;font-size:18pt;color:red }          H2 { font-family:"Verdana";font-weight:normal;font-size:14pt;color:maroon
}          pre {font-family:"Consolas","Lucida Console",Monospace;font-size:11pt;margin:0;padding:0.5em;line-height:14pt}          .marker {font-weight:
bold; color: black;text-decoration: none;}          .version {color: gray;}          .error {margin-bottom: 10px;}          .expandable
{ text-decoration:underline; font-weight:bold; color:navy; cursor:hand; }          @media screen and (max-width: 639px) {           pre { width: 440px; o'.
It is not written using WCF ... any workarounds?!
Thank you.

Hi Raj Krish,
For ASP.NET related issue, please post to the following forum:
http://forums.asp.net/
Regards,
Barry
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Capturing the Response message and sending to two diffrent systems

Hi Experts,
My Scenario is -
Legacy->PI-> SOAP
Legacy System Supports SOAP call and sync calls. Now my requirement is how can I send the response received from the target SOAP system to the actual sender as well as to another ECC system?
In this case ECC will not trigger any request message, it will only receive the response message from SOAP system.
P.S -- how to
Thanks
Sugata

Hi,
Another way, but a bit more resource intensive, is to use ccBPM, use an sync/async bridge and route the response message back to the caller but also send it to an extra receiver.
Regards,
Horia

How can I customize the error message UIX STRUTS ADF

Hi dear forum:
I need to customize the error message?
Error
Id - JBO-27014: Attribute Id in AppModule.BackupsView1 is required
Fecha - JBO-27014: Attribute Fecha in AppModule.BackupsView1 is required
AplId - JBO-27014: Attribute AplId in AppModule.BackupsView1 is required

Repost:
I need to customize the error message when I insert a new row with wrong values in ADF STRUTS UIX, where can I changue the default values for the message?

How to Customize the Error Message when a user enters a wrong password

Hi Gurus
Pls Help out me that
How to Customize the Error Message when a user enters a wrong password ?
I need the Help to Customize the messege ?
How we can do
Pls Tell me indetail

Firstly many appologies I have given you slightly duff information here, I had been editing the file above for email notification texts not logon / password texts.
The file you need is actually a portal .par file and can be found in the deployment/pcd directory. The file you need is called com.sap.portal.runtime.logon.par (with a .bak extension at this time).
You need to copy this file to a local machine and unzip the contents. The files you need to edit are contained in a further jar file which can be found in the \PORTAL-INF\lib directory - it is called umelogonbase.jar. It too needs to be extracted and the file you need to edit is logonMessages_xx.properties (where the xx is the language code you are using).
In this file you will find lines like:
NUMERIC_REQUIRED=Invalid new password (must contain digits)
You need to identify which texts you wish to modify and edit the text to the right of the equals sign. Once complete rezip the umelogonbase.jar file and then the com.sap.portal.runtime.logon.par (this time name it without the .bak extension. Then logon to the portal and upload the new par and you should see your new logon messages.
Haydn

How to customize the error messages in web analysis reports

Does anyone know how to customize the error messages that web analysis shows ,
I want to customize the below error message with a custom error message
"Document does not exist or no authorization to open document.Error occurred while loading document"
Does anyone know how to do this ?

Rajesh,
you may want to check these links
How to the Change the Application Stopped Message
How to Change the Dispatcher Running, No Server Connected Message
http://help.sap.com/saphelp_nw70/helpdata/en/65/18fc3f9ec4e669e10000000a155106/frameset.htm
Thanks
Bala Duvvuri

Sharepoint error - Search Issue - The content type text/html; charset=utf-8 of the response message does not match the content type of the binding (application/soap+msbin1).

i see this error everywhere - In ULS logs, on site. On the site > Site settings > search keywords; I see this -
The content type text/html; charset=utf-8 of the response message does not match the content type of the binding (application/soap+msbin1). If using a custom encoder, be sure that the IsContentTypeSupported method is implemented properly. The first 1024 bytes of the response were: '<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Strict//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-strict.dtd"> <html xmlns="http://www.w3.org/1999/xhtml"> <head> <title>IIS 7.0 Detailed Error - 500.19 - Internal Server Error</title> <style type="text/css"> <!-- body{margin:0;font-size:.7em;font-family:Verdana,Arial,Helvetica,sans-serif;background:#CBE1EF;} code{margin:0;color:#006600;font-size:1.1em;font-weight:bold;} .config_source code{font-size:.8em;color:#000000;} pre{margin:0;font-size:1.4em;word-wrap:break-word;} ul,ol{margin:10px 0 10px 40px;} ul.first,ol.first{margin-top:5px;} fieldset{padding:0 15px 10px 15px;} .summary-container fieldset{padding-bottom:5px;margin-top:4px;} legend.no-expand-all{padding:2px 15px 4px 10px;margin:0 0 0 -12px;} legend{color:#333333;padding:4px 15px 4px 10px;margin:4px 0 8px -12px;_margin-top:0px; border-top:1px solid #EDEDED;border-left:1px solid #EDEDED;border-right:1px solid #969696; border-bottom:1px solid #969696;background:#E7ECF0;font-weight:bold;'.
I am facing issues in searching, my managed metadata service is not running, search results page throws internal error. Any Idea why this above error comes.
P.S: We use windows authentication in our environment.

Hi IMSunny,
It seems you have solved this issue based on your another post.
http://social.technet.microsoft.com/Forums/en-US/aa468ab0-1242-4ba8-97ea-1a3eb0c525c0/search-results-page-throws-internal-server-error?forum=sharepointgeneralprevious
Thanks
Daniel Yang
TechNet Community Support

Customize the Response Message for Resource Scheduling - Sent by Microsoft Exchange Server 2010

Similar Messages

Maybe you are looking for