Customize Webi interface

Hi,
We are planning to expose Webi report to our client, when they saw the Webi 4.0 Design Mode, they complaint that the interface is too complex, so we are thinking of using SDK to customize the Web Intelligent interface, is there a way to reduce the top tool bar options? I know i can disable the tool bar options by security, but i not only want to disable, i also want to remove the tool bar options completely. Is it possible?
Thanks

Hi Adam -
Does this mean that Extension Points for JRP and DHTML viewer are not supported for BI 4? I know that these are supported and can be secured at the User Group level to enable/disable viewer and authoring components for the said technology modes so I assume your response refers to BI 4.
Curious to know -
Atul

Similar Messages

How to customize WAP VMclouds web interface?

Hi,
I'm looking for the way to inject into VM clouds interface the link to access my virtual machine hosted with WMWare. A Part of the VM are hosted by VMWare and the other ones are Hosted with Hyper-V. The management Layer is done with SCVMM so that
is why we choosed WAP for the Self services portal.
So how do I customize WAP Interface to connect through the VMware Url remote control to the VMWare virtual manchines.
Many Thanks,
Joro

Hi,
Since this issue is more related to Microsoft Azure Pack. I move it to the Azure Pack forum. It is appropriate and more experts will assist you.
Thanks for your understanding.
Regards,
Jambor
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Deliver report to Content Store directly with web interface

Hi all,
We are currently implementing a system which will use XMLP as the letter/report/document producer. XMLP will be accessed from other applications (Siebel, EBS or else) using a preformatted URL so that the user will be in context of the report/letter directly. We would like the user to generate the report using the parameters in the XMLP web interface and when the report is ready, that there was only a "Send" button which would put the report in a temporary folder in a Content Store (Oracle Content DB). We would like to achieve that without the user having to input the destination of the file, like with a WebDAV or FTP. So we need to customize XMLP to remove the "Schedule" button and change the behavior of the "Send" button.
We would also need to be able to send the context of the creation of the report in order to be able to store it at the right place in the Content Store. In order to do that, we would pass an Id by a query string in the URL when calling the report. I know this information is stored in the XMLP_SCHEDULER_JOB table in the DELIVERY_PARAMETERS field so it must be accessible in the app as well. A BPEL process would be used to move the document to the right place.
So, 2 questions:
- Is it possible to change the behavior of the "Send" button? Has anybody done that?
- How can we save the context of the execution of a report to a file at the same time we are generating the report? (parameters used, template used, etc.)
Any clue, hint or helpful thought would be very appreciated!
Thanks!
Pierre-Yves

Hi MadhuSudan,
I couldn't find the EBS Delivery you are refering about. Is this something using the Concurrent Manager from EBS? If so, this is not what I am trying to do. I really want to give access to XML Publisher and save the output report the user has made with the parameters he used to create it in order to store it in a content store. XMLP will be accessed by EBS and Siebel through a URL.
I am curious to look at your java program and shellscript, could you send me a link to the URL where I can find the information you were refering to?
Thanks!
Pierre-Yves

Customize Web-Client nterface (Documents tab)

Hi - has anybody manage to customize the Primavera web-client interface to add custom screens.
In particular, we would like to customize the 'Documents' tab and integrate Primavera with our content management system (EMC Documentum) to store and retrieve documents.
I am unable to find any decent guide on how to actually modify Primavera user interface, if such a thing is possible/supported. There is plenty of information about using the SDK/WebServices for accessing Primavera project data, but we need to go the other way - access third-party system from within Primavera.
I know we can use SharePoint or Oracle Content Management for this, but we need to use EMC Documentum.
Any tips/useful info/ideas highly appreciated,
Regards
Mirza

You can't customize the interface, but you could use a custom portlet and point it to your existing document management system, or create your own site that does what you need.

Problems access to a web application (Web Interface or Web report)

Hi,
We found problems with the access to web application. Some users have problems with direct links to the web applications(Web Interface or Web reporting), when they click on the link an error message appears, the message displays the following text:
"Cannot open file Bex?sap-language=ENbsplanguge=ENcmd=idoc_TE.."
Clicking in details the message is "No Access to specified file"
For this users the access to excel reporting is correct, the message appears when they click on the direct web links through the browser or directly in BW system, but if they type the URL they can access. Other users can use the direct web link without problems.
I highly appreciate any help or idea about how to solve this issue.
Thanks in advance.

HI,
please ask to your basis that check the language of every single user on su01 tx.
This is the problem i think.
Natalia.

Unable to capture trace, when user logs in throuigh Web Interface

The Trace shows 'No Records Found', when user logs in through Web Interface of CRM. But there is Trace found, when the same user logs in through logon pad and carries out normal actvities.
sufficient auth. is provided.
Is there any setting in ST01, through which i can get trace , when user logs in through Web Interface
Regards

ST10 traces 1 instance only.
Your CRM web interface could use another instance than your backend. Go to transaction SM21, choose the appropriate server and run ST10 again.
Succes!
Kind regards,
Lodewijk Borsboom

LIST OF VALUES not Populating in BPS WEB INTERFACE ( LAYOUTS )

Hi BI Guru's
I have created a WEB interface for BPS in BI ( version 7.0) . But when i execute this in internet explorer, I do not get the LIST OF VALUES for Material.
When I click on "input help" the system open a new window for "Value selection". When I specify the material code, it gives me blank LIST OF VALUES.
But it is working for other fields like Customer, UOM in the same layout.
Please suggest some solution.
Thanks,
Nilesh Labde

hi,
Thanks for the reply.
Master data is avaliable for the Material Code. The problem is in Internet Explorer and not in SAP GUI .
If i run Planning folder for the same layou in SAP GUI it is working fine.

ASA 5505 configured for WebVPN connecting to Citrix Web Interface

ASA 5505 configured for WebVPN connecting to Citrix Web Interface.
i have a ASA 5505 that I am attempting to configure for WebVPN with passthrough into Web Interface . The user authenticates into WebVPN OK and gets the option to click on the Citrix Link (which is i add bookmark citrix server http:// 172.30.40.5.) i enter the citrix and then for example i want to open to outlook it can not open. (when i want to open some application no application is open)).there is no alarm at asa. how i solve this issue?
thanks.

Teymur,
Can you confim that after disabling the ssl/tls on the Citrix server (secure connectivity) that you are getting exactly the same error. It is possible that it is generating a different error.
The bug where we have see the existing error was CSCtf06303 but that has been fixed in 8.4.1. Can you confirm the exact version of code you are running on the ASA.
If you have confirmed the above two notes it may be adventageous to open a TAC case as we may need to do some live additional troubleshooting.
Thanks
-Jay

Distortion in Save For Web interface

I am still having problems with my Save For Web interface. Attached is a screen where you can see that with just the Optimized view showing (in this case 72%), the picture looks as expected. But if I go to 2-up or 4-up views, the 2nd image (which was the 72% Optimized) is now all pixelated as if it were a GIF.

OMG! How many years have I been using this program and I have never noticed this until now?!?
Sorry for the brain fart and thanks for pointing that out!!!
I am really having a good laugh at myself about this one!
Jules

Cisco AP 1131AG Web Interface Problem

Hello,
I purchased two Cisco access points (model AIR-AP1131AG-A-K9) from a seller on eBay. The Access Points power up fine and are able to get an IP address (I can see the AP's MAC address on my router), but it won't let me connect to the web interface to manage it. I have tried using different browsers, but they all say something along the lines of "The page could not be found" when I enter the IP address into my browser. No login screen, no nothing: just a time-out error.
When the Access Points are powered on, the Ethernet and Radio lights start out green, but then the Ethernet light stays green and the radio light flashes amber and the two alternate being lit. The status light on the outside of the Access Point goes from green to orange to red and back again, looping infinitely.
Any ideas what could be wrong? Thanks for any and all help in advance! (Please let me know if you need more information; I don't ahve the AP's with me, but I will be home in a few hours and can respond then.)

do a show cdp neighbor detail on the port the AP is connected to. Take a look at the software that is running, IOS will show k9w7, and lightweight will show k9w8.
if it''s k9w8, you'll need to convert them back to IOS
http://www.cisco.com/en/US/docs/wireless/access_point/conversion/lwapp/upgrade/guide/lwapnote.html#wp160918
HTH,
Steve
Please remember to rate useful posts, and mark questions as answered

Displaying a BW query in web interface

Hello People ,
I am trying to see a BW query in a web interface . I will tell you how am I doing it . I run the transaction RRMX which opens an excel sheet and gives me a tol bar from which I open a query . Then I choose info areas from the next window and it shows me a tree structure with two nodes
1) Financial
2) Industry sectors
I expand industry sectors > retail > staff works
This takes me to two nodes
1)       operational
2)       sales infocube
I expand sales infocube and this takes me to a couple of nodes
1)       Key business driver
2)       Manager forcasted sales
3)       Productivity data source
4)       .
5)       .etc
I select key business driver and choose the CHANGE icon from the toolbar . This opens the query designer . There I have an icon in the toolbar which says display quey on web . I click that and it attempts to display the query in internet explorer .
Now the problem is the the message that appears on the browser is
Warning sign : variable OFPER for characterstic fiscal year/period has been converted to required entry .
Error sign : Error when generating data provider .
Now my question is what does this message mean ?Does this mean that the required content that I am trying to access has not been activated or there is some configurational issue ?
Regards
Deepak Singh

Hi Deepak,
It means that there is a selection screen for Fiscal period in which you have to enter the Fiscal Period. Only for the Fiscal period for which you entered the data would be displayed.
But the best way to create teh web report is to goto Web Application Designer -> Drag and drop the "Table" webitem on the right hand side -> Assign the Query to the web item. Now execute it in browser from the Web Application designer. Copy the link and use it whenver you want it.
Bye
Dinesh

BPS_WB-Can i add a query to a Web interface tabpage?

Dear experts,
In a BPS web interface application, i have already a tab page which allows users to input their data. Now i would like to add a second tabpage which allows to display the existing data.
Is that possible to link a BEX query to a Tabpage BPS web interface application? I would like that the query is launched and the result is displayed each time an user click on this tabpage.
Thanks in advance.

Include your query in a web template and follow the approach given in the link http://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/a861d590-0201-0010-248a-fc70d8d29f26
Edited by: Deepti Maru on Nov 30, 2010 10:24 AM

Executing the planning function while opening the web interface

hello all,
I have created a planning area based on multiprovider.This multiprovider is based on two transactional cube ie,COPA cube and Cost Center cube.
This planning area is meant for enabling integrated planning.One plans in COPA cube and other plans in Cost Center cube the income statement gets planned based on this two.
I selected planning items in multiprovider layout to display the income statement.The layout is as follows:
PlanningItem Amount
Net Sales: 9.000,00 INR (This comes from COPA)
Sales Overheads: 200,00 INR (This comes from Cost Center)
Depreciation: 200,00 INR (This comes from Cost Center)
Other Expenses: 300,00 INR (This comes from Cost Center)
EBIT: 0,00 INR
Interest Income: 0,00 INR
Interest Expense: 0,00 INR
Operating Income: 0,00 INR
Taxes: 0,00 INR
Now EBIT planning item is to be calculated from the planning items as follows:
EBIT = Net Sales-Sales Overheads-Depriciation-Other Expenses
For this i have created a planning function which calculates EBIT.This function works properly,there are no issues in it.
My problem is that i want this function to be executed as soon as i open the web interface for my planning application and the result should be as follows:
PlanningItem Amount
Net Sales: 9.000,00 INR (This comes from COPA)
Sales Overheads: 200,00 INR (This comes from Cost Center)
Depreciation: 200,00 INR (This comes from Cost Center)
Other Expenses: 300,00 INR (This comes from Cost Center)
EBIT: 8.300,00 INR
Interest Income: 0,00 INR
Interest Expense: 0,00 INR
Operating Income: 0,00 INR
Taxes: 0,00 INR
Can anybody suggest how to go about this problem?
Thanks in advance.
regards,
Yogesh

Hi Yogesh,
as far as i know, there is no standard functionality for that purpose, but there are workaround for it.
1. Modify the BSP Application.
 Go to SE80 --> Repository Browser --> BSP Application --> your WI name --> page with flow logic --> double click on page1.htm --> Event handler tabstrip --> on the drop down selection press F1 --> add a function module that call you BPS function in specific event (e.g: OnInitialization).
2. Use WI-Exit Class / WI-Extention (ABAP OO).
Here you need to create sub class from Class: CL_UPWB_BSP_APPL, and assign the class to your WI. You can then add a function module that call you BPS function in method:
2.1. Load --> performed only once on intial execution of WI.
2.2. Initialisation --> called once for each server response.
2.3. Dispatch --> called at each action and also for each WI component.
You can see further information in SAP how to paper:
How to Validate manual input in WEB planning application, New BPS-Features delivered with SAP BW 3.5, etc.
You can call your BPS function with BPS API FM (See F.Group: UPC_API)
But there is also more easier way to realize your ebit calculation. If you define your EBIT calc. manually in layout (define with manually defined Lead column). With this way, You will always get your EBIT analog with inputed values.
Then you add your EBIT calc.function to Layout Component in WI in property: 'Function After Data Change'.
Best Regards,
Suan Liono

P&L report (using web interface builder)???

Hi all,
Can someone explain BPS report concept for me?
For example,
In my P&L report, I will have fixed cost, variable cost, and revenue...etc.
I created fixed cost layout, variable cost layout, and revenue layout...etc.
My question is how those layouts generate a P&L report on the web interface??? If I enter planning data in the fixed cost layout and the values should be in the P&L report as well. How can I create P&L report in the web interface after I finished all layouts???Thank you for sharing
J.

Hi
You should create a BEX Web Query and integrate it in the upper level of WEB Layout.
Check this link for a step by step guide about this topic
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/how-to%20guides%20-%20rig%20official/bi/nw04/how%20to%20integrate%20bex%20web%20applications%20into%20bps%20web%20interfaces.doc
Ciao
Andr

How to configure the web interface of service desk

Hi All,
We are currently doing a configuration on solman service desk. I am on a stage where in i need to use the web interface of service desk via tcode notif_create_bsp. However, every time i call the transaction code (call the url) i cant view the web. Only an error the "Network Access Message: The website cannot be found".
I already activate needed services and already publish
SIAC_PUBLISH_ALL_INT but it still doesnt work.
I might have missed some configs/procedure on how to do it correctly.
My questions are.
1. How am i going to know the qualified domain name
of the Web AS for solman? How to configure it?
2. Can anyone give me some guide and any step by step documentation/procedure on this.
You help/suggestion will be very much appreciated
Thank you very much,
Ice

Hi,
+"Check the following 2 things. See if the port 8000 is open and in the url for the BSP in internet explorer, replace the host name with the IP address of your Solman server.+
+"+
That was a helpful tip. I change the host name with the ip address ofour solman server. However, upon login, it promts me to enter username and password. I've tried to login using my solman password but it shows an error like this.
Business Server Page (BSP) error
What happened?
Calling the BSP page was terminated due to an error.
SAP Note
The following error text was processed in the system:
Die URL enthält keine vollständige Domainangabe (10.123.161.125 statt 10.123.161.125.).
Exception Class CX_FQDN
Error Name
Program CX_FQDN=======================CP
Include CX_FQDN=======================CM002
ABAP Class CX_FQDN
Method CHECK
Line 10
Long text -
Error type: Exception
Your SAP Business Server Pages Team
Is there anything i need to configure so that i can maintan the username and password?
Thank you for your assistance,
Ice

Customize Webi interface

Similar Messages

Maybe you are looking for