Customized Addon unable to install after upgraded to B1 8.81 PL06

Hi,
we have developed a number of customized addons for one of our customer who is running
Windows Server 2008
SQL Server 2008 SP2
SAP B1 8.8 PL15
All of our addons are running fine except occasionally disconnected due to network signal dropped.
Recently we have upgraded them to 8.81 PL06. Most of the workstations are upgraded successfully, except a handful of others. Those problematic workstations are encoutering Addons connection issues with the following errors.
[Main]: System.Runtime.InteropServices.COMException (0x90040154): Internal Error (-214722164) occured [131-183] - Class not registered
[Main]: System.Runtime.InteropServices.COMException (0x90040154): Retrieving the COM class factory for component with CLSID {632F4591-AA62-4219-8FB6-22BCF5F0088} failed due to the following error: 80040154 at h.g()
These workstations are running Windows XP SP2 and users are logged in with administrator rights.
Any idea what went wrong?
thanks,
Taw-Fey, Tan

Hi Pauyon,
thanks for your reply.
This does not make sense because 80% of the workstations are working fine after the upgrade with the same Addon versions. Only 20% of the workstations are getting these errors. And all workstations are running on Windows XP SP2.
Taw-Fey,Tan

Similar Messages

Unable to install after effects cs5, photoshop 64x and premiere pro

Hello, i am unable to install after effects premiere pro and photoshop 64x from the cs5 suite, i think these are all 64bit programs right? I am running windows 7 64bit so i have no idea what the problem could be, anyone who has some advice?
I get the following errors:
Exit Code: 7
-------------------------------------- Summary --------------------------------------
- 1 fatal error(s), 2 error(s), 12 warning(s)
WARNING: OS requirements not met for {667C8B6C-3EAF-4646-A8EC-D85CCC4D3D84}
WARNING: OS requirements not met for {694213D7-1E0E-4C8F-B822-E2E3680C0FCE}
WARNING: OS requirements not met for {7816FDDE-40D4-482D-AD7D-97858985DB3E}
WARNING: OS requirements not met for {7DFEBBA4-81E1-425B-BBAA-06E9E5BBD97E}
WARNING: OS requirements not met for {896C3475-5363-48CE-9A6D-0F4ACC58D8E9}
WARNING: OS requirements not met for {AAE6F374-91CB-45FB-9282-4CFA0DED2088}
WARNING: OS requirements not met for {B8D286BC-A68D-4E74-9F68-8756A49896D8}
WARNING: OS requirements not met for {C0AA232E-BD1B-40B5-A176-A2BEB67FFAE1}
WARNING: OS requirements not met for {CD29B5CA-4727-4114-9AD9-25CCCE6E4014}
WARNING: OS requirements not met for {DE5DE662-2ECB-4D93-967B-221FBCC8A736}
WARNING: OS requirements not met for {F319804F-E3A4-4C02-8AEC-CB39A4F6447E}
WARNING: OS requirements not met for {F9C71630-0EE3-475C-9E2B-ED95AE197DBD}
ERROR: Found payload conflicts and errors:
ERROR: - Adobe InDesign CS5 Application Base Files depends on Adobe InDesign CS5 Icon Handler x64 to be installed.
FATAL ERROR: Conflicts were found in the selected payloads. Halting installation.

Hi,
Please contact Adobe technical chat support for further help. They will be able to help you with installation issues.
Thank you,
SM

Firefox cannot find flashplayer that I installed after upgrade to Firefox 11. On a OpenSolaris 11 machine. I did move libplayer.so to /usr/lib/firefox/plugins and bounced firefox... but plugin not found.

Firefox cannot find flashplayer plugin that I installed after upgrade to Firefox 11. I am running OpenSolaris 11 64 bit. I did move libplayer.so to /usr/lib/firefox/plugins and bounced firefox... but plugin not found.

Firefox cannot find flashplayer plugin that I installed after upgrade to Firefox 11. I am running OpenSolaris 11 64 bit. I did move libplayer.so to /usr/lib/firefox/plugins and bounced firefox... but plugin not found.

Unable to install CC upgrade: error 43

I,m unable to install CC upgrade. The installation stop to 63%. Message: Le programme d’installation n’a pas pu accéder à un fichier ou un répertoire essentiel. Veuillez relancer l’installation.(Code d’erreur : 43) Contacter le service clientèle

Mimi_sam please make sure your current User account has correct file permissions to write to the temp directory and that you have sufficient disk space.

Printer won't re-install after upgrading from 8.1 to Windows 10

The printer worked fine using Windows 8.1 on my netbook PC (no CD-ROM player).When I upgraded to Windows 10 the printer dialog box said I had to install the printer (again!)I use the printer wirelessly and the installer found the printer on my network. However, it was unable to install it after I had selected it. I tried again, as suggested, but still without success.Do I need to attempt to use a cable to install it, or would that be a waste of time too?

Try this Intel Graphics driver:
http://ftp.hp.com/pub/softpaq/sp65001-65500/sp65232.exe
******Clicking the Thumbs-Up button is a way to say -Thanks!.******
**Click Accept as Solution on a Reply that solves your issue to help others**

Driver for Officejet 4500 Wireless all-in-one will not install after upgrading to Windows 8.1

Upgraded to Windows 8.1 on Pavilion g6. Officejet 4500 Wireless all-in-one still prints but won't scan. Downloaded full feature driver. Installation quit giving error message 'file cannot be found'. Tried 'chat' sessions with no resolution
This question was solved.
View Solution.

Hello bob5e,
I am sorry to hear that you are unable to install successfully on your Windows 8.1 with your Officejet 4500 Wireless. I can see that the installation quits on you, giving you an error message. I am going to recommend trying a couple of things to hopefully make the installation successful.
1. First of all, try installing by using The Printer Install Wizard for Windows which finds the correct driver for your unit and installs it.
2. If that does not work, please try this next troubleshooting document step by step.
Installation issues - The Progress Bar on the Software Installation Stops or Stalls
I hope this helps!
Good luck
R a i n b o w 7000I work on behalf of HP
Click the “Kudos Thumbs Up" at the bottom of this post to say
“Thanks” for helping!
Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution!

No audio device installed after upgrading to windows 7???

after upgrading to windows 7 audio is not working error audio device not install driver error...

Hi,
You will need to identify your CPU and chipset. CPU-z is a free and safe utility that can do that for you.
If your system has an Intel chipset with disccrete or onboard graphics or an NVIDIA chipset with onboard graphics, then the drivers are here at this Realtek download page.
If your notebook is an AMD CPU and NVIDIA chipset, with a discrete graphics module installed, then the driver for your Conexant CX20549-12 will be here.
Post you results here in your thread so others rsearching for the same information can benefit from it.
Best regards,
erico
****Please click on Accept As Solution if a suggestion solves your problem. It helps others facing the same problem to find a solution easily****
2015 Microsoft MVP - Windows Experience Consumer

Snow Leopard failed to install after upgrade to Crucial 128GB SSD

Hi I just installed a new Crucial 128GB SSD to my MacBook 2010. Did the necessary to formt the hard disk Mac OS journal. However i am unable to install Snow Leopard from the installation disc.The message says "Install Failed, Mac OS X could not be installed on your computer. The installer could not copy the necessary support files". I have tried restarting and reinstalling but it always stop during installation at about "33 mins" left. Anybody can help?
Thanks.

Hey, i had the same problem and i tried allmost everything: but the problem was not the ssd, not the ram, not on changing the date, not on installing only part of the programs (X11, or the Fonts, etc.), to install first 10.5 and then 10.6...
in my case the problem was the driver. I just buy a new samsung external driver and I install with no problems the complete snow leopard.
After allmost 3 weeks with the problem I can say that I'm very happy.
Hope it helps,

Wi-Fi: Nohardware installed after upgrading to OS X Yosemite on a MacBook Air

My MacBook Air lost the WiFi installation after upgrading to OS X Yosemite. The error message is: Wi-Fi: No hardware install.

In some cases, this issue is caused by a hardware fault. A loose connection, a short circuit, or a microscopic break in a solder joint may open and close depending on temperature, making the failure intermittent.
Test after taking each of the following steps that you haven't already taken. Back up all data before making any changes.
1. Turn off Bluetooth. If you have a desktop Mac, you'll need a wired keyboard and mouse to take this step. Those are useful to have anyway, because Bluetooth is not completely reliable. If Wi-Fi works with Bluetooth turned off but not when you turn it back on, delete all pairings in the Bluetooth preference pane and recreate them. Restart the computer and test again.
2.. There are a few reports that the problem was solved by unchecking the box marked
Wake for Wi-Fi network access
in the Power Adapter tab of the Energy Saver preference pane. I can't confirm.
3. Reset the NVRAM.
4. Reset the System Management Controller.
5. Start up in Recovery mode. In the menu bar of the OS X Utilities screen, there's a Wi-Fi menu. Try to connect.
6. Make a "Genius" appointment at an Apple Store, or go to another authorized service provider.

Unable to print after upgrading to Snow Leopard (Dell 1320C) - Network

This recently started after upgrading to Snow Leopard.
The OSX drivers worked well with Leopard 10.5.xx but after upgrading to Snow Leopard, i keep getting "network host busy" or "could not connect to printer".
I've tried completly removing printer, reinstalling (IP based), drivers etc etc I even resetted the printing system (right clicking and reseting in the printers list).
This works fine with Leopard but it fails on Snow Leopard..

I had the same problem not being able to print to Dell 1320c after upgrading to Snow Leopard. Here is a work around for the Dell 1320c printer to work on Mac with Leopard 10.6.2
Do not use the printer driver from Dell. Delete the Printer Setup from your Mac.
Locate Mac Driver Suitable for 10.5 (Version 1.7) at http://www.fujixeroxprinters.com.au/en/support/Downloads.aspx?product=5452&categ ory=5726
Double click the icon to install after it downloads. It should create file DPC525AAPv17x5.dmg. When the install is finished you can delete the installer.
From the Apple menu open System Preferences and select Print & Fax.
Click the + to add a printer.
Select IP Printer.
Select for the Protocol: Line Printer Daemon - LPD
Type the IP address: 192.168.1.xxx or whatever your printer is assigned on your network. (If you don't know, go to your printer and hold down the Green button until the configuration sheet prints. You can see the IP address once printed.)
Name the printer "Dell Color Laser 1320c" or whatever you'd like to call it.
For Print Using select: FX
Next select FX DocumPrint C525 A-AP v1.7 in the box below.
On the next screen you must select 250 Sheet Feeder as an option. Otherwise it will only be able to manual feed.
Click Ok.
Go to Print something, File... Print... but don't click the Print button yet.
Under Pages: go to the Drop Down and select Fuji Xerox Features.
Find the Paper Source Drop Down and select Tray 1 (250 sheets),
then go up to Presets: Drop Down above and select Save As...
and under Preset Name, type Standard-1, leave This Printer Only and click OK.
Now you can click the Print button. This will set the Dell 1320c printer to print from the document tray and not try to manually feed all the time.
Anyway, that's the work around to use the Dell 1320c Color Laser printer under Mac OS Snow Leopard 10.6.x.
Hope this helps!
Good Luck
P.S. I guess eventually Dell might come out with an updated driver, but don't hold your breath...

Task Sequence packages not installing after upgrade to R2

Hi all
As the title suggests, I've upgraded my SCCM 2012 server from SP1 to R2. The OSD Task Sequences reach the stage where the client is installed, and ends after this point. However there are several software packages after this step that it is seemingly skipping
entirely now.
Any idea why this might be?
Thanks

Ok,
After banging my head for a few days with that issue i saw the light at the end of the tunnel ( an not the
train) today.
Long story short, the culprit was the boot image. I upgraded to 6.3 and everything in my TSs is working as
it should.
Here are the details:
The recall my issue, after upgrading SCCM from SP1 to R2, none of the software packages were getting installed
in a Task sequence. A TS runs up to the installation of the SCCM agent and then it quits.
Looking at the log file in C:\Windows\System32\ccm\logs\smstslog I found the following errors:
Resuming Task Sequence in Full OS TSMBootstrap
Failed to get the environment key. TSMBootstrap
Failed to resume task sequence (0x800700EA).
Exiting with return code 0x800700EA TSMBootstrap
Earlier i mentioned that my boot images did not get updated as part of the site upgraded, so i went and updated
them to version 6.3 and after making sure it got deployed in a TS to make it available through PXE, my problem was gone.
this post helped me tremendously to realized that the boot image was the issue:
https://social.technet.microsoft.com/Forums/en-US/a793071d-1a3b-4b68-b6de-6d8c1a1fda0f/failed-to-get-the-environment-key-smstslog?forum=configmanagerosd
Mario.

Unable to install any upgrades

I am unable to install any updates on my MBA with OS X 10.7.2. They all result in "An unexpected error occured". I have tried with lots of different updates, firware update, Lion update etc with the same result.
Any ideas?

The code below is from trying to install update "Airport Utility" version 6.0 from The standard OS X Software Update function. The user (me) is prompted with "An unexpected error occured". I have tried with EFI Firmware, Max OS X Update combined 10.7.3, All packages. The result is allways the same.
Thanks, Jesper
Feb 21 08:57:57 Jespers-MacBook-Air Software Update[259]: JS: 10.7.2
Feb 21 08:57:58 Jespers-MacBook-Air Software Update[259]: JS: 10.7.2
Feb 21 08:57:58 Jespers-MacBook-Air diskmanagementd[278]: DM ->T-[DMToolBootPreference recoveryPartitionInfoForVolume:what:dict:]: inHostDiskUDS=0x103c08c20=disk0s2=Macintosh HD inWhatStr=RecoveryInfoBaseSystemVersion
Feb 21 08:57:58 Jespers-MacBook-Air diskmanagementd[278]: DM ..T-[DMToolBootPreference recoveryPartitionInfoForVolume:what:dict:]: did get booterRecoveryUDS=0x103c08ae0=disk0s3=Recovery HD
Feb 21 08:57:58 Jespers-MacBook-Air diskmanagementd[278]: DM ..T-[DMToolBootPreference recoveryPartitionInfoForVolume:what:dict:]: did mount nobrowse; MP=/Volumes/Recovery HD OMS=0x7fa05b116de0
Feb 21 08:57:58 Jespers-MacBook-Air diskmanagementd[278]: DM ..T-[DMToolBootPreference recoveryPartitionInfoForVolume:what:dict:]: getting dict from file=/Volumes/Recovery HD/com.apple.recovery.boot/SystemVersion.plist
Feb 21 08:57:58 Jespers-MacBook-Air diskmanagementd[278]: DM ..T-[DMToolBootPreference recoveryPartitionInfoForVolume:what:dict:]: got dict (or NULL=will return err): oooInfoDict=0x7fa059605b60
Feb 21 08:57:58 Jespers-MacBook-Air diskmanagementd[278]: DM ..T-[DMToolBootPreference recoveryPartitionInfoForVolume:what:dict:]: did if-needed-best-effort unmount
Feb 21 08:57:58 Jespers-MacBook-Air diskmanagementd[278]: DM <-T-[DMToolBootPreference recoveryPartitionInfoForVolume:what:dict:]: retErr=0 outInfoDict={
              ProductBuildVersion = 11C74;
              ProductCopyright = "1983-2011 Apple Inc.";
              ProductName = "Mac OS X";
              ProductUserVisibleVersion = "10.7.2";
              ProductVersion = "10.7.2";
Feb 21 08:58:12 Jespers-MacBook-Air Software Update[259]: JS: 10.7.2
Feb 21 08:58:12 Jespers-MacBook-Air Software Update[259]: JS: Firmware is up to date.
Feb 21 08:58:12 Jespers-MacBook-Air Software Update[259]: JS: model = MacBookAir4,2
Feb 21 08:58:12 Jespers-MacBook-Air Software Update[259]: JS: 10.7.2
Feb 21 08:58:14: --- last message repeated 4 times ---
Feb 21 08:58:14 Jespers-MacBook-Air Software Update[259]: JS: Connected printer: MANUFACTURER:Samsung;MODEL:CLX-3180 Series
Feb 21 08:58:14 Jespers-MacBook-Air Software Update[259]: JS: Connected printer: MANUFACTURER:Samsung;MODEL:Samsung CLX-3180 Series
Feb 21 08:58:14 Jespers-MacBook-Air Software Update[259]: JS: Printing drivers update available for Samsung_Common. (return value 2)
Feb 21 08:58:14 Jespers-MacBook-Air Software Update[259]: JS: Connected printer: MANUFACTURER:Samsung;MODEL:CLX-3180 Series
Feb 21 08:58:14 Jespers-MacBook-Air Software Update[259]: JS: Connected printer: MANUFACTURER:Samsung;MODEL:Samsung CLX-3180 Series
Feb 21 08:58:14 Jespers-MacBook-Air Software Update[259]: JS: Printing drivers update available for Samsung_Common. (return value 2)
Feb 21 08:58:14 Jespers-MacBook-Air Software Update[270]: Acquired Lock: 503, 259, 0
Feb 21 08:58:14 Jespers-MacBook-Air Software Update[270]: Releasing Lock: 503, 259, 0
Feb 21 08:58:17 Jespers-MacBook-Air Software Update[259]: Calculated need 7324.112 MB; 19234.632 MB free; 19252.340 MB available with MTM reclaim
Feb 21 08:58:51 Jespers-MacBook-Air Software Update[259]: Calculated need 1423.282 MB; 19234.636 MB free; 19252.345 MB available with MTM reclaim
Feb 21 08:59:03 Jespers-MacBook-Air Software Update[259]: Calculated need 1393.781 MB; 19234.632 MB free; 19252.340 MB available with MTM reclaim
Feb 21 08:59:18 Jespers-MacBook-Air Software Update[259]: Calculated need 1423.282 MB; 19234.632 MB free; 19252.340 MB available with MTM reclaim
Feb 21 08:59:20 Jespers-MacBook-Air Software Update[270]: Acquired Lock: 503, 259, 0
Feb 21 08:59:51 Jespers-MacBook-Air installd[264]: PackageKit: ----- Begin install -----
Feb 21 08:59:51 Jespers-MacBook-Air installd[264]: PackageKit: request=PKInstallRequest <1 packages, destination=/>
Feb 21 08:59:51 Jespers-MacBook-Air installd[264]: PackageKit: packages=(
              "PKLeopardPackage <file://localhost/Library/Updates/041-1440/AirPortUtility.pkg>"
Feb 21 08:59:51 Jespers-MacBook-Air installd[264]: PackageKit: Skipping component "com.apple.AirPortBaseStationAgent" (1.5.5-155.2.0-155002000000000-*) because the version 1.5.5-155.7.0-155007000000000-255 is already installed at /System/Library/CoreServices/AirPort Base Station Agent.app.
Feb 21 08:59:51 Jespers-MacBook-Air installd[264]: PackageKit: Extracting file://localhost/Library/Updates/041-1440/AirPortUtility.pkg (destination=/var/folders/zz/zyxvpxvq6csfxvn_n0000000000000/Cleanup At Startup/PKInstallSandbox-tmp/Root, uid=0)
Feb 21 08:59:52 Jespers-MacBook-Air installd[264]: PackageKit: update_dyld_shared_cache -overlay /var/folders/zz/zyxvpxvq6csfxvn_n0000000000000/Cleanup At Startup/PKInstallSandbox-tmp/Root
Feb 21 08:59:55 Jespers-MacBook-Air installd[264]: PackageKit: xpchelper --rebuild-cache --overlay /var/folders/zz/zyxvpxvq6csfxvn_n0000000000000/Cleanup At Startup/PKInstallSandbox-tmp/Root
Feb 21 08:59:55 Jespers-MacBook-Air installd[264]: PackageKit: Executing script "./preinstall" in /private/tmp/PKInstallSandbox.scmLrH/Scripts/com.apple.pkg.AirPortUtility.7SWC9 k
Feb 21 08:59:56 Jespers-MacBook-Air installd[264]: PackageKit: Install Failed: Error Domain=PKInstallErrorDomain Code=112 "An error occurred while running scripts from the package “AirPortUtility.pkg”." UserInfo=0x7fc91c89f3a0 {NSFilePath=./preinstall, NSURL=file://localhost/Library/Updates/041-1440/AirPortUtility.pkg, PKInstallPackageIdentifier=com.apple.pkg.AirPortUtility, NSLocalizedDescription=An error occurred while running scripts from the package “AirPortUtility.pkg”.} {
              NSFilePath = "./preinstall";
              NSLocalizedDescription = "An error occurred while running scripts from the package \U201cAirPortUtility.pkg\U201d.";
              NSURL = "file://localhost/Library/Updates/041-1440/AirPortUtility.pkg";
              PKInstallPackageIdentifier = "com.apple.pkg.AirPortUtility";
Feb 21 08:59:56 Jespers-MacBook-Air Software Update[270]: Releasing Lock: 503, 259, 0
Feb 21 08:59:56 Jespers-MacBook-Air Software Update[259]: Error: An error occurred while running scripts from the package “AirPortUtility.pkg”. (PKInstallErrorDomain code 112)

Failed install after upgrade

I posted this in the Software Update forum but got no answer there...
Just updated my n73 to v3.0638.0.0.1 - thanks guys! - and am having an odd issue on restarting the phone.
I get an install bar and then a message asking me to complete the installation from Apps Manager.
Looking in Apps manager there is an "uninstalled" App called 20000d45.sis on the memory card. Clicking this and choosing to install then calls up the MobiPocket reader installer, which fails shortly after the bar finishes.
So problem identified. Mobipocket doesn't like the new update. Fair enough.
How do I stop it trying to install after every restart!
There seems to be no way to delete the installer from inside App Manger!
Whilst I have found related files on the Memory Card that I can delete, this seems to not help. The files still show on the phone.
Any tips?

Just connect it to the PC via USB Mode.There ya will see a drive of n73 on yar PC then open the drive and then direct go to Search option here ya will see dat 2000 or something like dat and then just delete it.I bet ya will never face any trouble like dis thing.
It not related wit da update program each time ya Hard reset update software without uninstalling the applications it will happen.So do it carefully.
O yeah at first I was so scared of ds type of problem but now it is very simple thing to me.
Last thing,Connecting N(73,80,91) via USB Mode and tranferring data in the N73 is more safe and less problematic than to do it with the damn PC Suit

Unable to connect after upgrade

Hi,
I just upgraded HTMLDB from 1.5 to V2.0 and although log file upgrade told no errors, I'm not able to login.
I have this message : 'error on the page'.
This is my marvel.conf file :
Alias /i/ "C:\Ora10_C_Geriform/Apache/Apache/images/"
          <Location /pls/htmldb>
          SetHandler pls_handler
          Order deny,allow
          Allow from all
          AllowOverride None
          PlsqlDatabaseUsername HTMLDB_PUBLIC_USER
          PlsqlDatabasePassword xxx
          PlsqlDatabaseConnectString xxx:xxx:GERIFORM ServiceNameFormat
          PlsqlDefaultPage htmldb
          PlsqlDocumentTablename wwv_flow_file_objects$
          PlsqlDocumentPath docs
          PlsqlDocumentProcedure wwv_flow_file_manager.process_download
          PlsqlAuthenticationMode Basic
          PlsqlNLSLanguage AMERICAN_AMERICA.WE8MSWIN1252
          AddType text/xml xbl
          AddType text/x-component htc
          </Location>
And this is the Apache/log file :
File does not exist: c:/ora10_c_geriform/marvel/images_2_0/geriformcss/core.css
File does not exist: c:/ora10_c_geriform/marvel/images_2_0/geriformcss/htmldb_V2.css
File does not exist: c:/ora10_c_geriform/marvel/images_2_0/geriformhtmldb/oracle_htmldb_logo.gif
File does not exist: c:/ora10_c_geriform/marvel/images_2_0/geriformhtmldb/builder/1px_trans.gif
any idea?
kind regards
couse1

Hi user465424,
Have a look at this: Re: doSubmit is not defined, error after upgrade to 2.0
or search the fourm with "after upgrade"
Regards Pete

I am unable to install After Effects CC to the specified location

My C drive is full, so I've moved PS, PP, and Media Encoder to my D drive. I went into my CC desktop app preferences and changed the install location. Now I'm trying to install After Effects, but it's still trying to install to the C drive, which is almost full, so I'm getting an insufficient space error. When will this issue be fixed?

theTallest
Even if you have changed the install location, the product will be downloaded and get extracted from temp folder which is located in C. So that you need to have to space in C.
If it is not possible to make free space on C drive, then you may download the products directly from below link and install it on D drive.
Adobe CC 2014 Direct Download Links: Creative Cloud 2014 Release | ProDesignTools

Customized Addon unable to install after upgraded to B1 8.81 PL06

Similar Messages

Maybe you are looking for