Customized incident form

Hi ,
I am customizing incident form and i am adding Job title of the affected user field to the form.Could you let me know how to configure this class that this should populate from Active directory.
Thanks
Krish
Regards, H@ri

Hi Krish
You will need to target the field to the class of active directory user when you have put the text box on the page. Place you text box then in the properties window click on binding path, scroll down to where it says affected user and select the job title
property.

Similar Messages

Custom Incident Form Data Binding Help

Hello Everyone! I'm relatively new to TechNet and am excited to learn a lot as well as contribute my experiences and help others learn as well!
I have read through tutorials, taken the MVA SCSM course, and even read through some books like SCSM 2010 Unleashed, and Microsoft System Center Service Manager Cookbook.
I am currently working on an SCSM 2012 project, in which I have to create a custom incident form for use within the console. I have tried to extend the existing form in the authoring tool, but found it too limited in function. Therefore I went down the
road of working on a completely new form in Visual Studio 2013 (I assume I cannot modify the existing Incident form in VStudio otherwise that would probably make my job alot easier). I have completed the UI of the form, and imported it into the authoring tool
to add some functions not present in VStudio (like list picker, etc.). I also created a new work item, pointed it to my custom assembly, and bundled up my files as a management pack bundle. I imported it into SCSM and successfully created
a custom view and implemented the form. Now I have to go back to the authoring tool and focus on binding the textboxes and controls to actual data… here I kind of am lost. How do I go about doing this? I know I have to point the textbox for example a location
on where to pull the data from, but where AM I pulling that data from anyways? For example, the status, the title, etc. These must all be bound to some data object somewhere in the CMDB but thats as far as I know. Any guidance, pointers, tips, even links to
documentation I can read would be greatly appreciated! Thanks in advance!

This might as well be a blog as I clearly love answering my own questions all the time... :)
So it seems the authoring tool is just poorly designed and does not allow one to pick from properties already defined to that class on an EXISTING control (e.g. If you create your form in VStudio like I did and go into Authoring Tool hoping to create the
appropriate properties and then map them to those controls like textboxes or listpickers, you can't do that.) Instead, create the form without ANY of the controls on it, so just the grids, background, and frame of the page. Then go into Authoring Tool and
create the properties in the class definition. Then, when you author the form you can DRAG OUT the properties, e.g. ID, Affected User, Status, etc. Automatically mapping the right control to the data type (e.g. it will drag out a textbox for a property that
is defined as a string), and does all the binding for you. That's it!
If you were curious as to what the actual syntax was incase you want to manually edit the XML, it would be a line containing something like this:
<PropertyBindingChange Property="Text" Object="TextBox_1"><NewBinding UpdateSourceTrigger="Default" BindsDirectlyToSource="False" Mode="Default" Path="Id" Enabled="True"/></PropertyBindingChange>

Custom Fields in Incident form - how to report on ?

I added a site field and a line of business filed to the incident form. The fields are not showing up in the DW to be reported on it seems, named the MP Incident Customer .. How do I get these fields to show ..

The management pack must be sealed in order to get the extended field to synchronize to the data warehouse.
www.zgc.se - Sysadmin blog.

Adding a populated field to an incident form

Hi,
hopefully someone here can help me out, I'm looking to add a field to the Incidents form in SCSM 2012, specifically a 'Location' dropdown with a few of our sites already in it and a 'room number' text box.
I'm having trouble getting started with this customisation and the more I read TechNet articles and blog posts the more difficult it seems.
Does anyone have any pointers on how to achieve this?
Thanks.

So there are two things that you need to do to do this. First: add a place to store this information. Second: add controls to the form so those places are exposed for editing.
The first part is more complicated, but not hard. Let's start with some design choices:
i'm assuming these two values are properties of the affected user, rather then the incident? the distinction here is if the location and room number are the location of the user having the issue, or a unique location for this issue. imagine a printer problem,
and bob calls this problem in. should the location field be linked to Bob's office so the analyst can find bob in the building, or should it be blank until bob specifies the room number that the printer is in?
If you want user properties, then the first step would be to
extend the user class (specifically, System.Domain.User) using
the SCSM authoring tool, by adding a ENUM or list property for the location, and a text property for the room number. you'll want to
save and seal this MP, then close the unsealed version and open the sealed version before continuing. If you want the Incident properties, you'll do the same process, only to the incident
class (System.WorkItem.Incident) instead oft he user class.
In regards to the second part, customizing the form: start by creating a second MP to store the form. you'll want to keep the class and form definitions separate, due to some property reference issues if they are in the same MPs. If the location is linked
to the user, then you'll want to follow
this example to create read only fields linked to the user in the new form. If Not, then you'll want to
customize the incident form, and
add a text box and
list control to link your form properties. Either way, save and seal the form MPs and import them both into Service Manager.
Open the forms and check your work. you'll note the dropdown has no entries. you'll want to create a third MP, this time inside SCSM (not the authoring tool) to store the List entries. find the list you created in the authoring tool and
add some entries.
At this point, if you are just storing the information on the incident, then you're done. if you are storing the data on the users, then you'll want to populate this information. you can do this with some automation, like powershell or orchestrator, to get
this data populated from it's original source, say the HR system that assigns offices, or you can customize the user form to expose these properties so your analyst can start populating this data.

Designing Custom CI-Form

Hi
I´m working on a custom CI-class with a custom form. Working with Authoring Tool designing the form is a nightmare. So my question is, can i design the layout of the form in any application and after that create bindings ect. in Authoring?
/Regards

Hi,
Yes of sure !
Try to check this :
http://social.technet.microsoft.com/wiki/contents/articles/13472.system-center-2012-service-manager-developer-s-survival-guide.aspx
Extending UI
SCSM 2012 use WPF (Windows Presentation Foundation) for all UI elements. With
SCSM 2012 you can extend UI by creating custom elements like:
Controls (can be placed on existing forms)
Forms
Console tasks
The most common problem with UI componenta is what UI use the IDataItem
interface and DataAdapters classes to communicate with SDK. So you can't use SDK
in forms and console tasks directly.
Overview of the Forms Infrastructure and the Generic Form
Tasks – Part 1: Tasks Overview
Open Source
Projects
SCSM Incident SLA Management
SCSM Send Email MP
SCSM Perf Test Harness
Examples
How
to Create Task Handlers
Tasks Part 2 – Custom Console Tasks for Create, Edit, Delete
Creating Custom Forms for Service Manager using Custom Controls:
Service Request Example
Create custom UserControl for SCSM 2010 SP1
(you can use same approach for SCSM 2012)
Creating a Custom Administration Setting
(Class, Task, Form, Wizard)
Service Manager 2012 – How to disable form controls for a Resolved
or Closed Incident – Part 1
Service Manager 2012 – How to disable form controls for a Resolved
or Closed Incident – Part 2
Insert CI property values into Microsoft Word Template and print
directly from Service Manager Console
(console task, Word automation)
How to add a button to edit ListView item on a custom SCSM form
Remy BOVI

Clicking on LinkTitle in list opens allitems instead of custom application form

Hello, This question is pertaining to SharePoint 2010.
I have one list which has two content types. We have modified the detault forms (new,edit and display) of each content type to its individual custom application pages. We have done this through coding.
SPContentType CT1= requestsList.ContentTypes["CT1"];
//Change Edit and edit URL to custom application page
CT1.NewFormUrl = "_layouts/folder/customnewapplicationpage.aspx;
CT1.EditFormUrl = "_layouts/folder/customeditapplicationpage.aspx;
CT1.DisplayFormUrl = "_layouts/folder/customdisplayapplicationpage.aspx;
//Delete the default from to enable custom application pages.
CT1.XmlDocuments.Delete("http://schemas.microsoft.com/sharepoint/v3/contenttype/forms/url");
web.AllowUnsafeUpdates = true;
CT1.Update();
list.Update();
And same update for the other content type. Everything works well.
When we click on new, custom new form opens, when we click on edit, custom edit form opens, when we click on view item, custom view form opens for respective content type. The problem is when we click on linktitle field value in allitems.aspx, it opens up
allitems.aspx page instead of opening display form as model dialog which is does when we click on view item by either selecting in ECB menu or from ribbon.
On custom application pages, I am using SharePoint:SaveButton to save values so that I do not need to write down the code.
I just tested one thing that, if we have our custom button and if we write traditional way to inserting list item into the list with specifying ContentTypeId in list item, then this problem does not appear. This is when SharePoint:SaveButton is clicked and
item is saved, at this time problem appears. I prefer going with SharePoint:SaveButton as I have more than 70 fields on the form and do not want to write a code to set values for 70 fields by doing SPList.AddItem()
According to me, SharePoint:SaveButton is saving list item inside folder because when we update the view and set to show items without folder, I cannot see list items saved using SharePoint:SaveButton click. But when i switch back to show items with
folder, all items appear. This may be the reason when I click on LinkTitle directly on that hyperlink, it opens up AllItems.aspx with FolderCTId={} as one of the query string.
Any pointers would be highly appreciated.

Hi,
We can do as follows:
1. Change the URL of Title field to the URL of custom application page using JavaScript.
2. Create a calculated column and set formula: ="<a href='"&UrlFieldName&"'>"&Title&"</a>", then we can use it as a “Title” column.
http://sharepoint.stackexchange.com/questions/58954/link-title-in-list-to-value-in-url-column
3. If you want to customize list form and use SharePoint:SaveButton control to save the data, the following articles for your reference:
http://ariwibawa-sharepoint.blogspot.com/2012/12/make-addeditview-custom-form-and-custom.html
http://thesharepointdive.wordpress.com/2012/03/20/list-forms-deployment-for-sharepoint-2010-part-1-of-4/
Thanks,
Dennis Guo
TechNet Community Support
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected]
Dennis Guo
TechNet Community Support

How to change a field to mandatory in custom list form in SharePoint designer 2010?

I need to create a custom form for a list, e.g. custom edit form. several fields are not mandatory by default, but in the custom edit form I need to make them mandatory. Is there a way to do that in SPD 2010?

Hi,
Thank you for sharing this with us, and it will help others who have met with this issue.
Victoria
Forum Support
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected]
Victoria Xia
TechNet Community Support

Custom tabular form error on apex_item id larger than 50

First post :)
I'd like to share a potential bug in apex (3.0.1) or misconfiguration in our application server
When creating a page with a custom tabular form, i've noticed that when i give a column an id over 50 (ex: "apex_item.text(51,salary) salary")
the page will generate errors in the apache.
The apache error log states the parameter F51 as incoming but it contains no value.
Further allong the log states:
"VARIABLES IN FORM NOT IN PROCEDURE: F51"
example report query:
select apex_item.hidden(1,"ID")||apex_item.checkbox(2,"ID") delete_checkbox
,apex_item.text(3,name) name
,apex_item.text(51,salary) salary
from employee;
I've always been under the impression that we could use F01 till F99?
Is there anyone who has encountered this problem before, or are my conclusions wrong?
Looking forward to an answer!
Niko

Hi Niko and Roel
Roel, you are right, I am hitting the 50 columns only limit too. Do you know of any ways to overcome this limit?
This post also describes the problem: Re: column in tabular form
Currently I need to create a tabular form to edit a table with 84 columns.
It sounds ugly, but this is a spreadsheet and the requirement is to get it in Oracle Apex 'as it is' and still, be able to edit it using MRU.
Any ideas?
Thank you very much.
Kubilay
Edited by: Kubilay on Jun 15, 2009 10:29 AM
Edited by: Kublai-Khan on Jun 15, 2009 10:30 AM

How to display the report output from a customized Oracle Form button

Hi Gurus
I developed a customized oracle form and one customized report. I want to run report from oracle customized form, for this i use one button to submit concurrent request for request.
its successfully submitted and i can view output by using View ----> Request --------> Find -------------> Output...
But problem is that how can i view output by using button not doing all steps to view output.
Regards,

Hi Haq Nawaz,
Refer Here
Regrads,
Guru

Add attachment button to a custom new form SharePoint 2013

I'm creating a new custom form using SharePoint Designer 2013.
I would like to add a attachment button to be able to upload files and images. How can this be done?
See code below
<tr>
<td width="190px" valign="top" class="ms-formlabel">
<h3 class="ms-standardheader">
<nobr>Attach Files</nobr>
</h3>
</td>
<td valign="top" class="ms-formbody" id="attachmentsOnClient" style="width: 434px">
<span dir="ltr">
<input type="file" name="fileupload0" id="onetidIOFile" size="56" title="Name"></input>
</span>
</td>
<td width="100px" valign="top" class="ms-formbody">
<input name="Button1" type="button" value="Attach" onclick='OkAttach()' style="width: 6em;
height: 1.7em" id="attachOKbutton" />
<span id="idSpace"></span>
</td>
</tr>
<tr id="idAttachmentsRow">
<td nowrap="true" valign="top" class="ms-formlabel" width="20%">
<SharePoint:FieldLabel ControlMode="New" FieldName="Attachments" runat="server"/>
</td>
<td valign="top" class="ms-formbody" width="80%">
<SharePoint:FormField runat="server" id="AttachmentsField" ControlMode="New" FieldName="Attachments" __designer:bind="{ddwrt:DataBind('i','AttachmentsField','Value','ValueChanged','ID',ddwrt:EscapeDelims(string(@ID)),'@Attachments')}"/>
<script>
var elm = document.getElementById("idAttachmentsTable");
if (elm == null || elm.rows.length == 0)
document.getElementById("idAttachmentsRow").style.display='none';
</script>
</td>
</tr>
Im getting error :
Uncaught TypeError: Cannot read property 'value' of undefined
form.js?rev=PxBF2F2E04Ut1YUooXDAbg%3D%3D:1
OkAttachform.js?rev=PxBF2F2E04Ut1YUooXDAbg%3D%3D:1
onclick
Somewhere around this line:
k=document.getElementsByName("RectGifUrl")[0];e.innerHTML='<span class="ms-delAttachments"><IMG SRC=\''+k.value+"'> <a href='javascript:RemoveLocal
Thanks in Advance

Create a custom list form or go to your NewForm.aspx using SharePoint Designer. Place the below code where you would like to insert the Attachment Field
<tr>
<td width="190px" valign="top" class="ms-formlabel">
<h3 class="ms-standardheader">
<nobr>Attach Files</nobr>
</h3>
</td>
<td valign="top" class="ms-formbody" id="attachmentsOnClient" style="width: 434px">
<span dir=”ltr”>
<input type=”file” name=”fileupload0″ id=”onetidIOFile” size=”56″ title=”Name”> </input>
</span>
</td>
<td width="100px" valign="top" class="ms-formbody">
<input name="Button1" type=”button” value="Attach" onclick='OkAttach()' style="width: 6em;
height: 1.7em" />
<span id="idSpace"></span>
</td>
</tr>
Thank You, Pallav S. Srivastav ----- If this helped you resolve your issue, please mark it Answered.

Error while calling standard OAF page from custom Oracle Form

Hi,
I am calling standard OAF page from custom oracle form using the following code.
FND_FUNCTION.EXECUTE(FUNCTION_NAME=>'FUN_TRX_ENTRY_OUT_VIEW_BATCH',
OPEN_FLAG =>'Y',
SESSION_FLAG =>'N' ,
OTHER_PARAMS =>'&ViewBatchID = "' || NAME_IN('FUN_AGIS_LINE_D.BATCH_ID') ||
'&CallingFunction = "' || 'MANEXPINQ' ||'"');
But I am getting this error.
oracle.apps.fnd.framework.OAException: This request was not processed as the request URL %2FOA_HTML%2FOA.jsp%3Fpage%3D%2Foracle%2Fapps%2Ffun%2Ftransaction%2Fentry%2Fwebui%2FViewOutBatchPG%26OAPB%3DFUN_PRODUCT_BRAND%26OAHP%3DFUN_SSWA_MENU%26OASF%3DFUN_TRX_ENTRY_OUT_SEARCH%26_ti%3D1217029204%26language_code%3DUS%26%26ViewBatchID%20%3D%20%22203148%26CallingFunction%20%3D%20%22MANEXPINQ%22%26CallFromForm%3D%27Y%27%26oas%3DqZqg3tmdEdUNyw_HtskVow.. contained potentially illegal or un-encoded characters. Please try again by submitting a valid URL or contact your systems administrator for assistance.
Please let me know any thing I missed out here.
Any suggestion will highly appreciated.
Thanks & Regards,
Sunita

I am using FND_FUNCTION.EXECUTE to call a OAF page from PLSQL in R12. I am getting following error"Error(9,23): PLS-00302: component 'EXECUTE' must be declared"

Java script is not working in custom tabular form

hai all,
i have changed my built in tabular form to custom tabular form.my java script is coding working fine in built in tabular form . But in my custom tabular form java script is not working ,since it is created as standard report(Display As).
pls help me.
with thanks and regards
sivakumar.G

Is the appostrophe function test(pthis) *'* present in your javascript code...
If not can you post the same in apex.oracle.com and give the credential so that I can the why its not wroking
Regards,
Shijesh

SP Designer 2010 - Saving custom list form impacts other list and other custom list form

Hi,
I have a source list, with custom display, edit and new forms all of them created in SP Designer 2010. These do nothing fancy, just for presentation purposes, fields were re-arranged in 2 columns.
Then I created a target list by saving the source list as template, the template brought over all customizations, all seemed to work fine. So I started to modify the target custom list forms.
Now here's the problem:
After a while making changes to the target list I realized that somehow the custom list forms on the source list had been modified... so I opened the source list in designer and noticed that the out of the box forms: NewForm.aspx, DispForm.aspx, EditForm.aspx
were now the default forms for the source list, and I couldn't pick my custom list forms to be the default forms for the source list anymore, they were not on the listbox. I could still see them by going in designer to All Files > Lists > SourceList
> and if I previewed them, they were empty.
I believe that somehow source and target list are linked, but why would designer allow making changes to the source list? like resetting the default forms, and breaking up the custom list forms that were in place?
I've verified list id's in the custom list forms of the target list and they belong to the GUID of the target list. I don't see anything else that could potentially point to the source list.
SharePoint Designer 2010 version: 14.0.7007.1000 SP2 14.0.7015.1000 I don't think this matters much because I've tried with other SP Designer 2010 versions and the error is the same.
thanks for your reply!

Hi alec,
When I create a custom EditForm1.aspx and set as default for a source list, then save this list as a template, then the newly created the target list based off this saved template, the source list still uses the custom EditForm1.aspx form as default
form, from SharePoint designer, I can see these two lists have different listID, so they have no connection when I edit any one of them.
Please recreate a new list with custom form page and save as template, then create a new list see if this issue could be reproduced, or we can create a new list instead if it is an isolate issue.
Thanks,
Daniel Yang
Forum Support
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected]
Daniel Yang
TechNet Community Support

How can I add a Save form button ( not save as ) for a custom fillable form ?

How can I add a Save button ( not save as ) for a custom fillable form ?
idea is ti to have a Save button at the bottom of each page where the person filling
the form clicks the save button on each page.( it is a 12 page fillable form )
The only thing I was able to do was add a button that opens a Save As
dialog box only.
My experience lever is - end user-intermediate.
Thnaks.

Thanks for the response.
I wonder why it wont allow.
If I can save ( as opposed to save as) this form by clicking the save icon on the menu bar, I am not sure why it is no possible to do so on page level!
Custom script option is not even remotely possible!

Custom tabular form for multi-row not saving data

Ok, before anyone asks, yes, I did read the how-to:-)
I have a custom tabular form, which I did cause I need to use popups and the popups that you can use in the wizard tabular form does not display the text but rather the value underneath it.
It returns data rather nicely and when I go and update values I can tell it is changing the fields underneath. I put a process in that will display the values in text fields on the form (for one row only) and I see them changing from what is already there and with the proper values.
However, when I do that the data that is displayed then gets reverted back to what it was previous to the update but reports that the process was successful.
I have also tried to insert but that is basically doing the same thing. Can anyone guide me.
SQL to generate the tablular form...
SELECT x.sak_release_db
, x.sak_object
, x.sak_release
, x.sak_participant
, x.sak_csr
FROM
(SELECT htmldb_item.hidden(1,sak_release_db) sak_release_db
, htmldb_item.popupkey_from_query(2, sak_object,
'SELECT b.nam_schema||''.''||a.nam_technical as table_name , b.sak_object
FROM system_object a
, database_table b
WHERE a.sak_object = b.sak_object') as sak_object
, htmldb_item.hidden(4,sak_release) sak_release
, htmldb_item.popupkey_from_query(5, sak_participant,
'SELECT nam_first || '' '' || nam_last as name, sak_participant FROM co_participant') sak_participant
, htmldb_item.popupkey_from_query(7, sak_csr,
'SELECT external_id|| ''-''||id_split as co, sak_csr FROM co') sak_csr
FROM release_db_xref
UNION ALL
SELECT htmldb_item.hidden(1,NULL) sak_release_db
, htmldb_item.popupkey_from_query(2, NULL,
'SELECT b.nam_schema||''.''||a.nam_technical as table_name , b.sak_object
FROM system_object a
, database_table b
WHERE a.sak_object = b.sak_object') as sak_object
, htmldb_item.hidden(4,NULL) sak_release
, htmldb_item.popupkey_from_query(5, NULL,
'SELECT nam_first || '' '' || nam_last as name, sak_participant FROM co_participant') sak_participant
, htmldb_item.popupkey_from_query(7, NULL,
'SELECT external_id|| ''-''||id_split as co, sak_csr FROM co') sak_csr
FROM dual) x
Process to verify that I have the correct global fields: (Type: PL/SQL anonymous block, Process Point: On Submit - After Computations and Validations)
begin
:P3_2 := replace(htmldb_application.g_f02(1),'%'||'null%',NULL);
:P3_5 := replace(htmldb_application.g_f05(1),'%'||'null%',NULL);
:P3_7 := replace(htmldb_application.g_f07(1),'%'||'null%',NULL);
end;
Process to do the insert/update. Note, I hardcoded the value in the where clause but I was originally using the global value for g_f01 (i also tried putting a commit in there for fun) (Type: PL/SQL anonymous block, Process Point: On Submit - After Computations and Validations):
-- Update the RELEASE_DB_XREF table
FOR i IN 1..htmldb_application.g_f01.count
LOOP
IF htmldb_application.g_f01(i) IS NOT NULL THEN
UPDATE release_db_xref
SET sak_object = replace(htmldb_application.g_f02(i),'%'||'null%',NULL)
, sak_participant = replace(htmldb_application.g_f05(i),'%'||'null%',NULL)
, sak_csr = replace(htmldb_application.g_f07(i),'%'||'null%',NULL)
WHERE sak_release_db = 22;
ELSE
IF htmldb_application.g_f02(i) IS NOT NULL THEN
INSERT INTO release_db_xref
(sak_object
,sak_release
,sak_participant
,sak_csr)
VALUES
(replace(htmldb_application.g_f02(i),'%'||'null%',NULL)
,htmldb_application.g_f04(i)
,replace(htmldb_application.g_f05(i),'%'||'null%',NULL)
,replace(htmldb_application.g_f07(i),'%'||'null%',NULL));
END IF;
END IF;
END LOOP;

Florian,
Checkboxes are different from other HTML form items. When you have a text box for example, there's always a value send to the server when submitting. Even if that value is NULL. When you have a checkbox however, you only get the value if the checkbox is checked. It's not posted to the server when it is not checked. That's the general behavior of HTML forms and not specific to Oracle HTML DB.
When working with tabular forms in HTML DB, you can access your form values using the htmldb_application.g_f0x arrays. Now if you have for example 10 rows in your form, then you'll get ten elements in your array for text boxes, select lists, etc. For checkboxes however you'll only get as many elements as you have rows checked. If I read your update and insert code correctly, you're trying to use the checkbox arrays the same way you use the arrays based on other item types. My recommendation would be to use Yes/No select lists instead of checkboxes or at least use select lists initially to get it working and then work on properly processing the checkboxes.
Some general information about working with checkboxes in tabuar forms can be found here:
http://www.oracle.com/technology/products/database/htmldb/howtos/checkbox.html#CHECKBOX_IN_REPORT
Hope this helps,
Marc

Customized incident form

Similar Messages

Maybe you are looking for