Customized manufacturer driver cant be updated.

Hello, my computer is a HP p6642f with windows 7 64 bit OS.  I need to update my graphics card for gaming, I have tried updating my graphics card from HP but the version my computer came with is the most recent version that HP provides, 8.15.10.2119 dated 20/04/2010. I dont know exactly what graphics card I have, my dxdiag says;
System
System Information
Current Date/Time: December-26-12 7:07:40 pm
Computer Name: OWNER-HP
Operating System: Windows 7 Home Premium 64-bit (6.1, Build 7600)
Language: English (Regional Setting: English)
System Manufacturer: Hewlett-Packard
System Model: p6642f
BIOS: 7/12/10 14:03:04 Ver: 6.12
Processor: Intel(R) Core(TM) I5 CPU 650 @ 3.20GHz (4 CPUs), ~3.2GHz
Memory: 6144MB RAM
Page File: 6649MB used, 5106MB available
DirectX Version: DirextX 11
Display
Device
Name: Intel(R) HD Graphics
Manufacturer: Intel Corporation
Chip Type: Intel(R) HD Graphics (Core I5)
DAC Type: Internal
Approx. Total memory: 1760 MB
Current Display Mode: 1680 x 1050 (32 Bit) (59 Hz)
Monitor: generic PnP Monitor
Drivers
Main Driver: igdum64.dll,igd10um64.dll,igdumd>
Version: 8.15.10.2119
Date: 20/04/10 9:18:38 PM
WHQL Logo'd: n/a
DDI Version: 10
Driver Model WDDM 1.1
What I need to know is what graphics card I have, what the most recent update is that will be compatible, and how to install the new version over the Customized manufacturer driver. Any help will be greatly appreciated. I received 2 games for christmas, DOOM 3 BFG Edition and Medal of Honor Warfighter Limited Edition. Neither will run and I suspect that updating my graphics card may fix both problems. When I try to load DOOM 3 BFG Edition I get the message:
'Unable to initialize OpenGl' followed by;
QA Timing INIT: 000124ms
D3BFG 1.1400 win-x86 Nov 9 2012 10:38:21
3192 MHz Intel CPU with MMX & SSE & SSE2 & SSE3 & HTT
5872 MB System Memory
-1284 MB Video Memory
Winsock Initialized
Found interface: {F9AFD013-48F7-493D-9C22-4B7CE725EA9F} Microsoft Virtual WiFi Miniport Adapter - 0.0.0.0 NULL netmask - skipped
Found interface: {79F8D309-CA49-4F2A-91FB-E5E15A263ED0} Realtek PCIe GBE Family Controller - 192.168.0.43/255.255.255.0
Found interface: {C4E9EFF8-DC43-4D3A-BD95-6E8012AB6738} 802.11n Wireless LAN Card - 0.0.0.0 NULL netmask - skipped
Sys_InitNetworking: adding loopback interface
doom using MMX & SSE for SIMD processing
enabled Flush-To-Zero mode
enabled Denormals-Are-Zero mode
------ Initializing File System ------
Loaded resource file _common.resources
Loaded resource file _ordered.resources
Loaded resource file _sound_pc.resources
Loaded resource file _sound_pc_gr.resources
Reading resource CRCs...
Current search path:
C:\Program Files (x86)\Steam\steamapps\common\DOOM 3 BFG Edition/base
C:\Users\owner\Saved Games\id Software\DOOM 3 BFG/base
file system initialized.
WARNING: Unable to open resource file maps/_startup.resources
----- Initializing Decls -----
Couldn't open journal files
execing default.cfg
couldn't exec D3BFGConfig.cfg
couldn't exec autoexec.cfg
----- R_InitOpenGL -----
Initializing OpenGL subsystem with multisamples:0 stereo:0 fullscreen:1
...registered window class
...registered fake window class
...initializing QGL
...calling LoadLibrary( 'opengl32' ): succeeded
X..WGL_EXT_swap_control_tear not found
display device: 0
DeviceName : \\.\DISPLAY1
DeviceString: Intel(R) HD Graphics
StateFlags : 0x8000005
DeviceID    : PCI\VEN_8086&DEV_0042&SUBSYS_2A9C103C&REV_18
DeviceKey   : \Registry\Machine\System\CurrentControlSet\Control\Video\{A8527AB9-54FB-49BE-BF2F-02D86CE8A950}\0000
      DeviceName : \\.\DISPLAY1\Monitor0
      DeviceString: Generic PnP Monitor
      StateFlags : 0x3
      DeviceID    : MONITOR\HWP2654\{4d36e96e-e325-11ce-bfc1-08002be10318}\0002
      DeviceKey   : \Registry\Machine\System\CurrentControlSet\Control\Class\{4d36e96e-e325-11ce-bfc1-08002be10318}\0002
          dmPosition.x      : 0
          dmPosition.y      : 0
          dmBitsPerPel      : 32
          dmPelsWidth       : 640
          dmPelsHeight      : 480
          dmDisplayFlags    : 0x0
          dmDisplayFrequency: 59
...calling CDS: ok
display device: 0
DeviceName : \\.\DISPLAY1
DeviceString: Intel(R) HD Graphics
StateFlags : 0x8000005
DeviceID    : PCI\VEN_8086&DEV_0042&SUBSYS_2A9C103C&REV_18
DeviceKey   : \Registry\Machine\System\CurrentControlSet\Control\Video\{A8527AB9-54FB-49BE-BF2F-02D86CE8A950}\0000
      DeviceName : \\.\DISPLAY1\Monitor0
      DeviceString: Generic PnP Monitor
      StateFlags : 0x3
      DeviceID    : MONITOR\HWP2654\{4d36e96e-e325-11ce-bfc1-08002be10318}\0002
      DeviceKey   : \Registry\Machine\System\CurrentControlSet\Control\Class\{4d36e96e-e325-11ce-bfc1-08002be10318}\0002
          dmPosition.x      : 0
          dmPosition.y      : 0
          dmBitsPerPel      : 32
          dmPelsWidth       : 1280
          dmPelsHeight      : 720
          dmDisplayFlags    : 0x0
          dmDisplayFrequency: 60
...created window @ 0,0 (1280x720)
Initializing OpenGL driver
...SetPixelFormat failed
Shutting down OpenGL subsystem
...wglMakeCurrent( NULL, NULL ): failed
...releasing DC: failed
...resetting display
...shutting down QGL
...unloading OpenGL DLL
Initializing OpenGL subsystem with multisamples:0 stereo:0 fullscreen:1
...initializing QGL
...calling LoadLibrary( 'opengl32' ): succeeded
X..WGL_EXT_swap_control_tear not found
display device: 0
DeviceName : \\.\DISPLAY1
DeviceString: Intel(R) HD Graphics
StateFlags : 0x8000005
DeviceID    : PCI\VEN_8086&DEV_0042&SUBSYS_2A9C103C&REV_18
DeviceKey   : \Registry\Machine\System\CurrentControlSet\Control\Video\{A8527AB9-54FB-49BE-BF2F-02D86CE8A950}\0000
      DeviceName : \\.\DISPLAY1\Monitor0
      DeviceString: Generic PnP Monitor
      StateFlags : 0x3
      DeviceID    : MONITOR\HWP2654\{4d36e96e-e325-11ce-bfc1-08002be10318}\0002
      DeviceKey   : \Registry\Machine\System\CurrentControlSet\Control\Class\{4d36e96e-e325-11ce-bfc1-08002be10318}\0002
          dmPosition.x      : 0
          dmPosition.y      : 0
          dmBitsPerPel      : 32
          dmPelsWidth       : 1680
          dmPelsHeight      : 1050
          dmDisplayFlags    : 0x0
          dmDisplayFrequency: 59
...calling CDS: ok
display device: 0
DeviceName : \\.\DISPLAY1
DeviceString: Intel(R) HD Graphics
StateFlags : 0x8000005
DeviceID    : PCI\VEN_8086&DEV_0042&SUBSYS_2A9C103C&REV_18
DeviceKey   : \Registry\Machine\System\CurrentControlSet\Control\Video\{A8527AB9-54FB-49BE-BF2F-02D86CE8A950}\0000
      DeviceName : \\.\DISPLAY1\Monitor0
      DeviceString: Generic PnP Monitor
      StateFlags : 0x3
      DeviceID    : MONITOR\HWP2654\{4d36e96e-e325-11ce-bfc1-08002be10318}\0002
      DeviceKey   : \Registry\Machine\System\CurrentControlSet\Control\Class\{4d36e96e-e325-11ce-bfc1-08002be10318}\0002
          dmPosition.x      : 0
          dmPosition.y      : 0
          dmBitsPerPel      : 32
          dmPelsWidth       : 1280
          dmPelsHeight      : 720
          dmDisplayFlags    : 0x0
          dmDisplayFrequency: 60
...created window @ 0,0 (1280x720)
Initializing OpenGL driver
...SetPixelFormat failed
Shutting down OpenGL subsystem
...wglMakeCurrent( NULL, NULL ): failed
...releasing DC: failed
...resetting display
...shutting down QGL
...unloading OpenGL DLL
Unknown command 'vid_restart'
Unable to initialize OpenGL
Shutting down OpenGL subsystem
...shutting down QGL
And when I try to load Medal of Honor Warfighter Limited Edition I get a window saying:
'DirectX device creation error' followed by;
Failed creating D3D device of at least version 10.0 on adapter "Intel(R) HD Graphics" with driver "Unknown". Error is DXGI_ERROR_UNSUPORTED ("Unsuported.").
This is typically casued by not having the minimum required DirectX support in the GPU.
For NVIDIA GPUs, DirectX 10.0 support is required.
For AMD and GPUs from other vendors, DirectX 10.1 support is required.
Ok, for Medal of Honor Warfighter it says my graphics processor doesnt support DirectX 10.1, but the fact is I have direct X 11 which contains everything that DirectX 10.1 contains. So I assume that DirectX or Medal of Honor Warfighter is looking at the name of my video card, comparing it to a list of compatable cards, my card having been customized by the manufacturer is not on the list, and so it refuses to try to load DirectX or Medal of Honor Warfighter? I dont know, if there is some other way to correct the problem that would be great, but I'd really like to update my video card. I have heard that updating a customized manufacturer driver can casue instability, but i'm willing to take the risk. If I cant get a solution to my problem here, I'd like to at least know what my graphics card model is other than just 'Intel(R) HD Graphics (core I5)' so that I can continue searching on my own.
This question was solved.
View Solution.

Well, yes and no... the card requires 2 "physical slots" but only connects to one "electrical slot"... the PCIe x16 slot. Your computer has 5 expansion slots... one PCIe x16 slot, three PCIe x1slots, and a mini-PCIe x1 slot. The mini-PCIe x1 slot hosts the factory wireless card and it appears the the other four slots are empty. The GTX 550 Ti card would connect to the PCIe x16 slot and cover or hide the adjacent PCIe x1 slot. This is normal and designed to work like that. It just requires that the adjacent slot is empty.
Frank
{------------ Please click the "White Kudos" Thumbs Up to say THANKS for helping.
Please click the "Accept As Solution" on my post, if my assistance has solved your issue. ------------V
This is a user supported forum. I am a volunteer and I don't work for HP.
HP 15t-j100 (on loan from HP)
HP 13 Split x2 (on loan from HP)
HP Slate8 Pro (on loan from HP)
HP a1632x - Windows 7, 4GB RAM, AMD Radeon HD 6450
HP p6130y - Windows 7, 8GB RAM, AMD Radeon HD 6450
HP p6320y - Windows 7, 8GB RAM, NVIDIA GT 240
HP p7-1026 - Windows 7, 6GB RAM, AMD Radeon HD 6450
HP p6787c - Windows 7, 8GB RAM, NVIDIA GT 240

Similar Messages

IPod cant be updated (unknown error -50)

I made a fresh install of WinXP pro (with a nLite customized CD). I installed iTunes (current version) and my iPod Shuffle is recognized by the program. But if I try to copy songs to my iPod, iTunes says that my iPod cant be updated. The volume cant be read or written. Sometimes a 2nd error message occurs that says unknown error (-50).
I get no error message during startup of iTunes, the iPod is recognized by iTunes and Windows as well. All seems to be working, but it dont if I tried to update the iPod. I assume that a needed service of windows maybe missing, but dont know which one are necessary.
I also tried to reset my iPod. But this do not work with this version of iTunes. So I use the older program ipodsetup to reset my iPod to version 1.14 but this doesnt solve my prob too.
Any ideas? Plz help!
Plz help.

It's weird. I format my iPod and plug it into usb again. iTunes popup and asked for a name of the new iPod. I choose one and I choose autofill, too. Then iTunes filled up my iPod with songs. So far every thing was ok. But after this op was finished, I make some settings which needs to be saved on my iPod Shuffle and of course the same error occurs again. I cant put songs on it manually, this seems only to work on 1st launch of iTunes (u know every time u start iTunes the message "dont plug off iPod..." appears, where I got no errors messages at all).
I need ur support becuz I cant figure out the reason why this happens! I cant use my iPod becuz I cant choose which music has to be copied on it.

Hard Drive errors after update attempt

I have a Macbook with Mac OSX 10.5.7. 2.2 GHz Intel core duo 2GB 667MHz DDR2 SDRAM Western Digital 320GB Hard drive
I attempted updating to the newest version and the computer froze part way through. When I tried to restart I got the daisy wheel running on the grey screen, but would not go further. So i put in the Install Disc, and hit power button and shift key. I got as far as Installer, but when I got the window that asked where to install the OS, there were no choices in the window.
I then removed the disc and tried to boot up, which it did. All the data is there, but I did lose my desktop customization. All applications launch OK (I have tried about a third) except Safari. Safari will not launch.
Based on another post in the forum, i went to Disk Utility and tried to Repair the disk. It failed due to a "Invalid Node Structure". So I tried to Repair Disk Permissions (also based on a forum post). That ran OK, but now the Repair Disk button is grayed out. And when I try to Verify Disk, I get the following:
SMART Status is verified, Partition Map Scheme is GUID.
In the History Window:
Performing Live Verification
Checking Journaled HFS Plus volume
Checking Extents Overflow file
Checking Catalog file
(the next three lines are in red letters)
Invalid Node Structure
The volume MacHD needs to be repaired
Error: Filesystem verify or repair failed
I have also found that there is no longer an administrator for the computer. It is actually my daughter's, and both she and I have (used to have) administrator privileges. Now in Accounts we are both listed as Standard users. I tried to update software. When asked to give my password, it said I was not an administrator (Using the correct password). Neither would my daughter's password work. The laptop does not think we are administrators.
So now the computer is running, and all data is still on it. But I cannot launch Safari. And I cannot update software (as there is no administrator).
(I have seen some posts suggesting third party software which may fix my disk. But they cost $100 and I can buy a new hard drive for 60 to 80.)
Has anyone a clue as to what went wrong? More important- does anyone know how to fix it??
Many thanks in advance.
Mark

After I erase the hard drive (I assume one pass of writing zeros is good enough, 7 passes not needed?) do I turn off the laptop, then turn on and insert the Install Disk? Will there be a prompt telling me when to put in the disk? Or do I put in the disc right after erasing?
One pass is fine. If you've previously backed up your hard drive to an external hard drive using SuperDuper!, which is what I use and recommend, or another program, if it created a bootable drive, you want to boot off of it, bring up SuperDuper! and copy the drive back to the internal hard drive. SuperDuper also makes the drive bootable. When done, reboot, and you should be all set. If you're using Time Machine, you'll want to install the operating system, then restore the Time Machine backup. SuperDuper! is available from http://www.shirt-pocket.com/superduper/superduperdescription.html
Finally- should I update the OS? Is there a problem with the newest update that caused this crash, or was it just a spurious glitch/bad luck?
I've been running 10.5.8 for awhile with no issues, and would recommend moving to it.

Ipod cant be UPDATED! help pls

hi, ok i dun seem to be able to update my ipod using itunes.. ipod shows up in e itunes source list but when i click Autofill to update i get this error message: "The iPod cannot be updated. An unknown error occurred (-36)." any idea how to resolve this? thx!

yup, i've tried restoring it.. now itz empty n still cant be updated.. how do u check if it's set to manual update? by manual update do u mean i drag and drop songs frm the library into my ipod? if that's wat u mean, i've tried it too.. don't seem to be working.. yikes =S

FD33 - Receivable Field in Customer master is not getting updated

FD33 - Receivable Field in Customer master is not getting updated for the FI documents posted in the customer account. I need to know is there any setting either in FI or in SD, which control whether the FI document is relevant to credit check?
In SD, we are having the item category but i am not getting how to control for FI documents? How can i make them credit relevant item. Also for special item, we are controlling the same through Transaction code : OBXY - by special GL indicators but what about the normal/general item?
How can I control the general FI documents having various FI documents type as relevant to credit check?

Apart from the above,please also check the below:
FD33 - Receivable Field in Customer master is not getting updated for the FI documents posted in the customer account. I need to know is there any setting either in FI or in SD, which control whether the FI document is relevant to credit check?
As per me there is no specific control to active the credit active field in FI values unlike for updating the sales values in FD32 we activate credit active for the item cat(VOV7) which will ensure the sales values to update (open order, open delivery and open invoices) in to credit management.
For FI values to update i think this is inbuilt in the program only.( example update group 000012,15,18 etc).
Any way coming into query not updating the receivables, please check the below points once again.
1. Check the whether invoice has accounting document generated or not, make sure that it is generated then only system update the receivables.
2. Even if the above all points are checked including above all posts,then also still the same issue repeating then try to run the program RVKRED77, before this first run RVKRED88 and compare this values with FD32.
thanks,
Srinu.

My computer failed to install the compatible driver software when updating my iphone and now my iphone is unusable as it is requesting me to connect it to itunes but i physically cannot connect to itunes... help me please?

my computer failed to install the compatible driver software when updating my iphone and now my iphone is unusable as it is requesting me to connect it to itunes but i physically cannot connect to itunes... help me please?

Hi there croadstar,
You may find the troubleshooting steps in the article below helpful.
iOS: Device not recognized in iTunes for Windows
http://support.apple.com/kb/ts1538
Issues installing iTunes or QuickTime for Windows
http://support.apple.com/kb/ht1926
-Griff W.

TS1967 In the past, when I updated iTunes, some items would be 'lost'. I quit updating, still running 10.6 i do keep my files on an external hard drive, which I plug in before starting iTunes. If I leave the drive off, and update, would that keep me from

In the past, when I updated iTunes, some items would be 'lost'. I quit updating, still running 10.6. I do keep my files on an external hard drive, which I plug in before starting iTunes. If I leave the drive off, and update, would that keep me from losing any files? Also, does anyone know how to search the iTunes store by price? I'm particularly interested in movies and audiobooks... Thanks

iTunes does not have provision for automatically storing one kind of media on a separate drive, so you have some basic decisions to make first. Do you want these movies to still appear in your iTunes library, or are you content with browsing filenames on a drive in Finder when you want to look for one? The second's the easiest thing because then you don't have to have an external drive permanently turned on and attached to your computer (wired or wireless). To do that you literelly only need to drag your movies folder to an archive drive and delete movies from iTunes. To watch them again you can add it back to iTunes while holding down the option key so the movie is used from its location on the external drive.
There's ways to move the movies to an external drive while keeping them in iTunes but the external drive iwll always have to be turned on and connected to the computer or you will see a bunch of broken link exclamation marks.
Realize what you are talking about is not "backup". Backup (which you should do) is putting a second or more copy of items on external drives for the day when your internal drive fails and everything on it is lost, inclduing all your home photos and perhaps things that have been pulled from the iTunes Store and can no longer be re-downloaded.

I have a free agent desk 500GB external hard drive. Since updating my iMac OS to mountain lion recently, it will no longer backup, stating "an error occurred while creating the backup folder". Can anyone help me with this?

I have a free agent desk 500 GB external hard drive. Since updating my iMac OS to Mountain Lion it no longer backs up through Time Maching like it did in the past. Now, after completing its work it says, "Unable to complete backup. An error occurred while creating the backup folder." I cannot find any sites that help me fix this. Do I need to purchase a new external hard drive?

Hi Aaron,
Have you looked through Pondini's extensive TM help site?
http://Pondini.org/TM/FAQ.html
http://pondini.org/TM/Troubleshooting.html
Can't imaging something not being covered there.

How to install html5 and css3 in my DW cs6 i cant download updates from adobe :/

how to install html5 and css3 in my DW cs6 i cant download updates from adobe :/

What do you mean you can't write HTML5 code? Are you working within an HTML5 doc type?
To make HTML5 your default doc type, go to Edit > Preferences > New Document. Click on screenshots below.
To create a new page, go to File > New > Blank page > HTML. Select none from the 3rd column. Select HTML5 doc type. Hit Create button.
Nancy O.

I have an 08 apple desktop and my ipad mini wont connect with my itunes and i cant find updates to fix this what do i do?

i have an 08 apple desktop and my ipad mini wont connect with my itunes and i cant find updates to fix this what do i do?

From Apple's website and printed on the box the mini came in:
Syncing with iTunes on a Mac or PC requires:
Mac: OS X v10.6.8 or later
PC: Windows 7; Windows Vista; or Windows XP Home or Professional with Service Pack 2 or later
Download iTunes at www.itunes.com/download
You will have to update to at least OS X 10.6.8 or later, otherwise known as snow leopard.

TS3694 iphone cant be update to ios6 and saying a 3014error

iphone cant be update to ios6 and saying a 3014error

Look to the right in the MORE LIKE THIS box. Your issue has already been addressed. You should search before posting.

Custom manufacturing process

Hi,
There is a custom manufacturing process in a client of ours.. They take out the tire from the truck
and send to vendor.. The related vendor cover the tire and send it back. Then the covered tire is put
on the truck again.. We manage this process in SAP. For example we use "ABC" material code for the
tire, and the ABC material code has three valuation types "LANDING, COVERED, NEW". They remove ABC
code (the tire) from the truck with the valuation type "LANDING" with the movement type 992 (a copy of 262). Then
the ABC code sent to vendor with valuation type "LANDING" and with the movement type 541. After
that they create a PO. In the item of PO, ABC code is entered with the valuation type "COVERED" and
in the material data tab, they enter ABC code with valuation type "LANDING" to components area.
When doing the GR with respect to the PO, system requires new accounts for BSV and FRL keys. What is
logic behind this ? Why does SAP require these account instead of using the account which is already
there for WRX key ?
Thx,

system requires new accounts for BSV and FRL keys as u are doing GR for subcontracting PO
As u are consuming the landing type and geting covred type of material
BSV is Changes in stocks are posted in Inventory Management at the time goods receipts are recorded or subsequent adjustments made with regard to subcontract orders
while FRL is used for goods and invoice receipts in connection with subcontract orders that is your labout charges that u will be paing to ur vendor for converting landing type of material to converted one.
Account entries woyuld be
BSX Stock acount + for covered type
BSV Change in stock acount - for covered type
FRL External service + (labour charges that will be payed to vendor po price)
WRX GR/IR clearing account -
BSX Stock acount - for landed type
VBO for consumption from stock of material provided to vendor + for landed type
hope this makes clear

Why cant i update to os 10.7.5

why cant i update to os 10.7.5?

If you're still running 10.6.3, you'll need to update to 10.6.8 to get the App Store. Since you didn't supply any information about your Mac, Lion might not be a good match for you.
After you have the App Store, Lion can be ordered here: http://store.apple.com/us/product/D6106Z/A/os-x-lion

Whats wrong with the servers i cant download update 5.1 firmware

whats wrong with the servers i cant download update 5.1 firmware ive been trying for 2 days it says i dont have permission to access the requested source

What says you don't have permission to access the requested source? That is not an error that should come up at all either from iTunes or when attempting an over the air upgrade. At least not an error that has anything to do with the servers.
It could be a permissions problem on your computer or an issue being caused by your firewall or antivirus software.

HT3939 why cant i update my ios 4.2.1 to 4.3 on my iphone 3g? is there any possible way to do this?

why cant i update my ios 4.2.1 to 4.3 on my iphone 3g? is there any possible way to do this?

Because the iPhone 3G isn't capable of running iOS 4.3 or newer.
(76029)

Customized manufacturer driver cant be updated.

Similar Messages

Maybe you are looking for