Customized report on Cisco Prime 2.0

Hi to all,
I'm searching for a customized report on the Cisco PI 2.0. I'd like to have a report showing an inventory of my APs wit their ethernet mac, radio mac, IP, serial number. I did have a look at the 'device' part available on the Report launchpad  but cannot find what I want.
Do you know where I can find this kind of report? Or any way to choose the columns I want?
Thanks!
Theo

HI,
YEs you can do it via PI.
GO to Report launch pad >Device > Inventory then click on New
Screenshot:
Then clcik on Customize.
Hope it helps.
Regards
Dont forget rate helpful posts

Similar Messages

  • How can I get CDP neighbor information from access point reports in Cisco Prime 2.0

    How can I get CDP neighbor information from access point reports in Cisco Prime 2.0?  I have looked through all the reports and I cannot find a report that gives me the CDP neighbor information of an access point.  I thought that information was in there, however I cannot seem to find it.
    Thanks in advance!

    Hi
    You can get this from an inventory report in PI (Select Report Type AP). Here is an example of PI 2.1 works for me. Once you export this into excel you can sort based on controllers & filter the single controller connected AP you want.
    Regards
    Rasika
    **** Pls rate all useful responses ****

  • Reports in Cisco Prime

    Hi,
    I have installed the LMS 4.1 in our network. I would like to generate an Interface_Utilization Report for all the interfaces of the device group I already chose, not just the "Top/Bottom 10", is there anyway to carry out this?
    Thanks in advanced.
    Best regards,
    Laura Herrero

    Hi
    You can get this from an inventory report in PI (Select Report Type AP). Here is an example of PI 2.1 works for me. Once you export this into excel you can sort based on controllers & filter the single controller connected AP you want.
    Regards
    Rasika
    **** Pls rate all useful responses ****

  • Cisco Prime Infrastructure 2.1 Custom Reports

    Hi, I need to generate a custom Guest User report from Cisco Prime Infrastructure 2.1. It needs to have a couple more fields added to the existing "Guest User Association" report.
    Is it possible to connect to the Cisco Prime Infrastructure Database and Generate custom reports? Is there any documentation on this?
    Thanks

    Programmatic access to PI's data is via the REST API.
    Check the help menu on your PI server to see documentation regarding the supported tables and fields that can be queried via that method.

  • CISCO PRIME INFRASTRUCTURE NETFLOW TRAFFIC REPORT

    Hi,
    I have a report from cisco prime infrastructure, that I don´t know how to interpret,  because the fields in the report I don´t know what´s mean them,  the difference between them, what are optimal values, the worse values, etc.
    Can someone help me with this
    The name of the report is: FLEX NETFLOW TRAFFIC TQPQ
    The fields that I don´t know what are:

    hello,
    I also have a problem concerning the interpretation of the report that I got. if anyone knows how Cisco gets its premium reports, it will help me!

  • Cisco Prime Infrastructure - Is there a report of unused switch ports?

    Hello,
    Is there a report in Cisco Prime Infrastructure 1.4 showing the unused switch ports?
    There used to be one in Cisco Prime LMS (Reclaim Unused Up/Down Ports Report).
    Thank you,
    Luke

    Hello,
    I now have Cisco Prime Infrastructure 2.0 running, and I don't see a report like the "Reclaim Unused Up/Down Ports" report that existed in LMS.
    I found one called "Interface Capacity", but it only shows the number of ports that are "connected", "notconnect" or "disabled".
    Does anyone know if a report of Unused ports exists in Prime Infrastructure 2.0 or if it will be available later on?
    Thank you,
    Luke

  • Cisco prime 4.2 monitor SFP conn & isdn active call session

    Hello all,
    my customer already bought cisco prime 4.2 , they asked me if this cisco prime is able to monitor the SFP (fiber connector) status active/not active and monitor the voice call active session for 24 hours ? anyone can help me to configure it ?
    thanks in advance,

    i couldn't find the appropriate MIB to monitor the call session

  • Cisco Prime: Event Larm Port 'x' is down on device.

    Hi,
    I'm writing regarding; event-larms; that is reporting from Cisco Prime; connected to controller. Interfaces is reporting via event-larm; that they are down.
    "Virtual Domain: ROOT-DOMAIN
    PI has detected a change in one or more alarms of category Controller and severity Critical in Virtual Domain ROOT-DOMAIN.  
    The new severity of the following items is Clear:
    1. Message: Port '3' is down on device '10.1.1.2'.
     (6 times)
    2. Message: Port '4' is down on device '10.1.1.2'.
     (6 times)
    3. Message: Port '5' is down on device '10.1.1.2'.
     (6 times)
    4. Message: Port '6' is down on device '10.1.1.2'.
     (6 times)
    5. Message: Port '7' is down on device '10.1.1.2'.
     (6 times)
    6. Message: Port '8' is down on device '10.1.1.2'.
     (6 times)
    E-mail will be suppressed up to 30 minutes for these changes."
    Is there a solution how to not recieve those event-larms? The only LACP interfaces that is configured is 1 & 2, in a group.
    See attached screenshot, when trying to disable the other interfaces.
    The LACP is enabled and configured on "management" interface.
    Best Regards,
    David

    From: https://supportforums.cisco.com/discussion/12077376/prime-infrastructure-alarm-port-down#comment-9405836
    "As far as I understand the error message you only need to disable SSO before you can disable the LAG ports."
    "(Cisco Controller) >config port adminmode 3 disable
    Blocked: Lag is enabled. Disabling the lag port is blocked when system is in redundancy state (SSO)"
    "I would suggest to do this only in a maintenance window."

  • Cisco Prime - Custom Inventory Change Report?

    Hi,
    Cisco Prime has this report:
    Reports > Inventory > 24-hour Inventory Change
    The problem is that the Report reports things that I don't want to track, like changes in "NVRAM Used",  Interface Speed, etc...
    Is it possible to configure Inventory Change so that it would not check some itens?
    Thanks.

    Thanks for answering,
    my report has, for example, the following information:
    Changes for Device: router01
    Processor Identity: ProcessorID = 3
    Attribute           Type of Change           Time Change Detected           Previous Value           Current Value
    NVRAM Used (KB)           Changed           2014-02-21 00:10:00.69           16923           16953
    I saw that Syslog Automated Actions > Inventory Fetch has very useful configuratios, but I think that it is still not what I need. The screen you pointed out was related to messages from Syslog that triggers inventory collection.
    What I need is in the image below.
    All right, NVRAM changed it's current used size. For me, it is completely useless to know about that every day in my Inventory Change report. That information is flooding my report. How to remove it from future reports?
    Thanks again!
    Message was edited by: Leonardo Machado

  • Cisco Prime LMS Custom Reports

    Hi I wonder if anyone can help.
    Using the custom properties and query expression section in LMS Prime 4.1 I would like to create a report that checks the movement of end nodes.
    For example I need to know if PC A on switch A has moved to switch B in the last month. I need to try and track the (unauthorised) movement of PCs on my network?
    Perhaps I'm looking in the wrong field?
    Any help in creating this report would be apprecaited.
    Thanks
    Rod

    Ciscoworks has its own custom properitary database.  You can create an ODBC connection to the data base and use excel, access, or sql management studio to create and develop custom reports.

  • Cisco Prime Rogue AP Report - No Rogues from 3702 Series AP's

    I am running Cisco Prime Infrastructure (2.1) that manages a Cisco 5508 WLC (7.6). We have multiple version of AP's managed by this WLC to include 1142, 2602, 3702, etc...In Cisco prime when we run a Rogue AP Report. None of the Rogue AP's discovered by 3702's are displayed in the report. The Rogues show on the WLC though from all AP's. Cannot find a reason for this. Any ideas?

    The Rogue alarm state always stays on "removed" once deleted
    CSCuo91446
    Description
    Symptom:
    Once one of the alarm of rogue AP is deleted the newer rogue AP alarm changed to removed state even for different mac address.
    Because of the removed state the detecting AP which detected the rogue is not displayed
    Conditions:
    1) Auto SPT is turned on
    2) Prime 2.0 or 2.1
    Workaround:
    Click on refresh from network for each alarm in removed state or disable auto spt
    Last Modified:
    Jun 30,2014
    Status:
    Fixed
    Severity:
    3 Moderate
    Product:
    Cisco Prime Network Control System Series Appliances
    Known Affected Releases:
    (1)
    2.1(0.0.1)

  • Cisco Prime Collaboration Assurance IPPhone 3901 no serial number report

    Hi All,
    I have installed Cisco Prime Collaboration Assurance in my office and try to create phone inventory report , so far no problem , but when i add IPPhone 3901 there no serial number in the report , I have enable web access on the phone , i can see the serial number by click the IP  .
    any help ?
    Best Regards,
    Tommy

  • Custom report of all cisco devices

    Hello
    Does some one  now how to make a custom reports for all my devices with prime infrastructure 2.1 (2.1.0.0.87)
    when i make a custom report (inventory or hardware) i don't see my module's (and serial numbers of the module's) 4506 or 6506.
    can some one help me .
    thx
    greetings Frank

    manng228,
    It appears that in the past few days you have not received a response to your
    posting. That concerns us, and has triggered this automated reply.
    Has your problem been resolved? If not, you might try one of the following options:
    - Visit http://support.novell.com and search the knowledgebase and/or check all
    the other self support options and support programs available.
    - You could also try posting your message again. Make sure it is posted in the
    correct newsgroup. (http://forums.novell.com)
    Be sure to read the forum FAQ about what to expect in the way of responses:
    http://forums.novell.com/faq.php
    If this is a reply to a duplicate posting, please ignore and accept our apologies
    and rest assured we will issue a stern reprimand to our posting bot.
    Good luck!
    Your Novell Product Support Forums Team
    http://forums.novell.com/

  • Cisco Prime Infrastructure 2.1 Not generating reports

    Dears,
    I am new to Cisco Prime. I installed Cisco Prime Infrastructure 2.1 for 60-days evaluation and i added routers, switches and APs. I configured SNMP community and telnet credentials. I can see clients on Dashboard, but when i go to reports and generate them for last hour, it displays "None Detected".
    Please advise.

    Programmatic access to PI's data is via the REST API.
    Check the help menu on your PI server to see documentation regarding the supported tables and fields that can be queried via that method.

  • "Busiest Clients" report template on Cisco Prime & Aironet 1242AG

    Yesterday I was trying to schedule a "Busiest Clients" report on our Cisco Prime physical appliance (PRIME-NCS-APL-K9, v2.1.0.0.87).
    My goal was to monitor the busiest clients on a couple of old Aironet access-points. These APs have been installed in a branch office of our university that rely on 4 Mb/s SHDSL WAN connectivity and, as you might imagine, some saturation occurs when the classrooms are crowded.
    Unfortunately, all the reports were empty ... there was only a "No data matches the specified criteria for the report” warning inside.
    The Client Statistics task (Administration>Background Tasks) was enabled and I was able to run this report selecting a different floor area ... after a few tries I've discovered that this error occurs only when the old Aironet 1242AG APs are involved. If I select a floor area populated with the newer 1142 and 2602 models, the report template works as intended.
    So, is there a way to fill a "Busiest Clients" report with data fetched from our old Aironet 1242AG APs?
    Our WLC is a Cisco Wireless Services Module 2 Controller for Cisco Catalyst 6500 (WS-SVC-WISM2-K9).
    (Sorry ... my English is a bit rusty)

    Hi,
    Kindly try to restart the Dameon manager with the command line of the server
    1> net stop crmdmgtd
    and then start the daemon manager --> net start crmdmgtd (wait for atleast 20-25 minutes before login back to LMS and also see if any file do exist at location CSCOps\Objects\dmgtd\ready folder).
    Get the output of pdshow after waiting for 20 minutes and stdout.log and stderr.log from CSCOpx\MDC\tomcat\logs.
    Many Thanks,
    Gaganjeet

Maybe you are looking for

  • New 15" Macbook Pro hard drive failure

    It is common for a 15" Macbook Pro hard drive to crash after 3 months?  How does Apple Support generally fix?  Genuis bar seemed overwhelmed by holiday crowds and recommended an $8k 3rd party vendor.

  • Datagird submit button needs to be clicked twice

    Hello I have a submit button on an adf Read Only table that needs to be clicked once when the first page of data is shown to go to the next page but twice when the option “next 10” or the drop down list is used. The situation is as follows: I have on

  • Storing Graphics in an Oracle Table

    I am using Actuate to develop a series of reports from an 8i database. I use several graphics files as sources for report images. These are all derived from .TIF formatted files. Is there a way to grab these images in binary format and incorporate th

  • Auto resolve alert - Polling interval

    Hi, When service is stopped, alert is generated but once i restart the service alert gets auto-resolved within a minute. When alert is generated if database size is full, once we increase the size it will take more than an hour for alert to get auto-

  • Have an older 3s iphone and need to save contacts before I complete swipe off all info?

    have an older 3s iphone what needs to be complete formatted and I do not what to loose the contacts.  Have not synced in years.  Does not want to sync Please advise