Customized XML Report error in Arabic Instance

Dear All,
A Customized XML Report works perfectly without error in English Instance, where as in the Arabic Instance it throws the below error.
In the English Instance, if we select both languages in language settings in SRS window while submitting the report, only Language( American English, Territory:AMERICA ) is working , Language (Arabic, Territory:UNITED ARAB EMIRATES) is having error.
Application Ver: 12.1.3
Module: custom
Today I registered one new report it works perfectly in both instances. (Arabic/English), the settings of DD, Template are same for both.
Kindly suggest me where can be the error.
ﺕﻼﻣﺎﻌﻤﻟﺍ
'61'=p_PAYROLL_ID
'4980'=p_TIME_PERIOD_ID
'4549'=P_PERSON_ID
Forcing NLS_NUMERIC_CHARACTERS to: '.,' for XDO processing
: APPLLCSP Environment Variable set to
: Current NLS_LANG and NLS_NUMERIC_CHARACTERS Environment Variables are
8ARABIC_UNITED ARAB EMIRATES.UTF
:ﺮﺴﻟﺍ ﺔﻤﻠﻛ ﻞﺧﺩﺃ
ﻞﻛﺍﺭﻭﺃ ﺄﻄﺧ ﺙﺪﺣ :0300-REP
ﻲﻠﺧﺍﺩ ﺄﻄﺧ :0069-REP
:ﺄﻄﺧ ﺩﻮﺟﻭ ﻊﻣ ﺀﺎﻬﻧﻹﺍ ﻢﺗ:ﺔﻳﺭﺎﺠﻟﺍ ﺔﻔﻴﻇﻮﻟﺍ ﺀﺎﻬﻧﺇ ﻢﺗ :57054-REP
ﻞﻛﺍﺭﻭﺃ ﺄﻄﺧ ﺙﺪﺣ :300-REP
2013 52:32:13 7 11 ﺲﻴﻤﺨﻟﺍ Report Builder: Release 10.1.2.3.0 - Production on
.c) 1982, 2005, Oracle. All rights reserved) Copyright

Hi,
Please see notes:
11i-12 How To Perform Quick Checks for REP-3000: Internal Error Starting Oracle Toolkit (Doc ID 364838.1)
Master Note : Comprehensive REP-3000 Troubleshooting and Overview Guide (Doc ID 200474.1)
Guide to Solving Report Issues REP-XXX in Procurement (REP-0069, REP-1814, REP-1212, REP-0756, REP-1416, REP-1247, REP-736, REP-0759) (Doc ID 1535982.1)
Thanks &
Best Regards,

Similar Messages

Custom xml report errored with :emsg:was terminated by signal 4

Friends,
one of the custom report errored out with the below error:
Current NLS_LANG and NLS_NUMERIC_CHARACTERS Environment Variables are :
American_America.UTF8
stat_low = 84
stat_high = 0
emsg:was terminated by signal 4
Program was terminated by signal 4
Concurrent Manager encountered an error while running Oracle*Report for your concurrent request 5443587.
when browsing metalink I came across few notes and chmged the out put of Active users report to XML which also errored out, the same report was running fine in other environments. we just freshed this from PROD and nothing was changed.
any ideas
Thanks.

Hi Guru,
Application version is 11.5.10.2 and DB 10.2.0.3 running on AIX, Yes it is working on other test environments and production.
here is the error from OPP log
[3/18/10 10:35:17 AM] [UNEXPECTED] [2908896:RT5443609] java.io.FileNotFoundException: /<path>/o5443609.out (No such file or directory)
 at java.io.FileInputStream.open(Native Method)
 at java.io.FileInputStream.<init>(FileInputStream.java:129)
 at oracle.apps.fnd.cp.opp.XMLPublisherProcessor.process(XMLPublisherProcessor.java:229)
 at oracle.apps.fnd.cp.opp.OPPRequestThread.run(OPPRequestThread.java:157)
[3/18/10 10:35:17 AM] [2908896:RT5443609] Completed post-processing actions for request 5443609.
Looks like the output file was not generated as the request errored out.
Thanks.

How to create new Custom XML Report without using Form Builder

Hi,
What are the steps to create new Custom XML Report without using Report Builder ?
Thanks and Regards,
Abhi

Hi,
Steps we now follow
1)Create Data Model in Reports Builder
2)Create xml
3)Insert xml in Publisher to build Fomat
4)FTp rdf
5)Create Data Definition and Template
6)Create executable and Concurrent Program
Is there any way we can build reports without use of Report Builder ? By writing PL SQL Package for Before Report and After Report etc ...
Thanks and Regards,
Abhijit Rode

PO custom XML report output shows junk characters

Hi,
One of our PO custom XML report's output(pdf) shows junk characters. when these junk characters are copied to any text editor, it shows correct text characters.
Below are our environment details:
RDBMS: 10.2.0.
Oracle E-Business suite: 12.0.6
OS: Oracle Sun 10
This is a clone system and the issue started after cloning
Please suggest.
Thank you.

Hi,
I would appreciate if any one has any suggestion on this issue.
Thank You,
Mohammed

Issue with XML report printing on R12 instance

Hi,
I'm facing issue with printing xml reports on R12 instance and followed the note (How To Print XML Publisher PDF Reports Via The Concurrent Manager:metalink id:338990.1) and configured the pasta printer,still printer output is showing the junk charcters.
Please let me know how to resolve the issue?.

Hi Hussien,
We are on 12.1.1 / 11g with AL32UTF8 character set, we have custom reports developed in BI publisher and some some migrated reported from earlier version.
Both BI publisher based custom like PO/Invoice/Cheque Print & seeded reports like "Active users/responsibilites" are being generated successfuly in pdf output. when copied to desktop and printed it prints properly. But when trying to direct output to printer from concurrent request it is printng junk.
I checked pasta configuration, all required ghostscripts tools are on the AIX box, am I missing anything in R12?
Regards

XML reports error

when i run any XML report i found error in log .
Environment will now switch to UTF-8 code-set.
Parts of this log file may not display correctly
as a result. This is an expected behavior.
XML_REPORTS_XENVIRONMENT is :
/disk1/oracle/prodora/8.0.6/guicommon6/tk60/admin/Tk2Motif_UTF8.rgb
XENVIRONMENT is set to /disk1/oracle/prodora/8.0.6/guicommon6/tk60/admin/Tk2Motif_UTF8.rgb
Current NLS_LANG and NLS_NUMERIC_CHARACTERS Environment Variables are :
AMERICAN_YEMEN.UTF8
REP-3000: Internal error starting Oracle Toolkit.

Please post the details of the application release, database version and OS.
when i run any XML report i found error in log .
Environment will now switch to UTF-8 code-set.
Parts of this log file may not display correctly
as a result. This is an expected behavior.
XML_REPORTS_XENVIRONMENT is :
/disk1/oracle/prodora/8.0.6/guicommon6/tk60/admin/Tk2Motif_UTF8.rgb
XENVIRONMENT is set to /disk1/oracle/prodora/8.0.6/guicommon6/tk60/admin/Tk2Motif_UTF8.rgb
Current NLS_LANG and NLS_NUMERIC_CHARACTERS Environment Variables are :
AMERICAN_YEMEN.UTF8
REP-3000: Internal error starting Oracle Toolkit.REP-3000 error is related to the DISPLAY settings, please make sure that the DISPLAY is set correctly.
Please also see these docs/links.
Master Note : Comprehensive REP-3000 Troubleshooting and Overview Guide [ID 200474.1]
How To Perform Quick Checks for REP-3000: Internal Error Starting Oracle Toolkit. [ID 364838.1]
Troubleshooting Tips for REP-3000 Error when Running E-Business Suite PDF/POSTSCRIPT/HTML Reports [ID 207532.1]
Rep-3000 , REP-69 When Running any Reports on E-Business Suite 12.0.4 [ID 729849.1]
REP-3000 Error While Creating XML File with Arabic data (REP-3000). [ID 562573.1]
https://forums.oracle.com/forums/search.jspa?threadID=&q=REP-3000&objID=c3&dateRange=all&userID=&numResults=15&rankBy=10001
Thanks,
Hussein

Custom XML Transformer Error

I have created a custom XML Transformer using the SAP Library article:
http://help.sap.com/saphelp_nw04/helpdata/en/e1/98e14110340b7fe10000000a155106/frameset.htm
I created the project and uploaded the PAR file but when I try to create an XML iView I get to the part where I enter the URL and when I click "Next" I get the following error:
Caused by: com.sapportals.portal.prt.core.broker.PortalApplicationNotFoundException: Could not find portal application com.sap.portal.EmptyTransformersProvider...
In the PAR Structure section it says - The Par File must have the following folder structure:
dist->PORTAL-INF->portalapp.xml
dist->PORTAL-INF->xml->XSLLibrary->Transformers (My custom XSL File (stock.xsl) is HERE)
dist->PORTAL-INF->xml->Transfomers.xml
This I have completed however, it also shows two files under the project:
EmptyTransformersProvider.etz
com.sap.portal.EmptyTransformersProvider.par
What are these files and how do I create/add them?
I noted that the name of the Project created here is EmptyTransformersProvider but my project is named ep_sts does this matter?
Also if it matters: this is a DC which I created in NWDS using Enterprise Portal->Portal Application Module.
Lastly I have tested the XSL using Internet explorer and an XML File and it workes fine so I would assume it is not the XSL causing the error.

Hello
As i've created my own transform according to the tutorial, it doesnt appear in the list of available transforms either in the xml iview wizard or editor.
Any idea ?
previously I had the same error resolved by naming the project with the right name.
Thanks

Custom Oracle Report errored with Enter Password: REP-0004: Warning: Unable to open user preference file. REP-0300: ORACLE error occurred. REP-0069: Internal error REP-57054: In-process job terminated:Terminated with error: REP-300: ORACLE error occurre

Hi Gurus
We have created a custom oracle report and concurrent program and when we ran the concurrent program it is error out with below error
Enter Password:
REP-0004: Warning: Unable to open user preference file.
REP-0300: ORACLE error occurred.
REP-0069: Internal error
REP-57054: In-process job terminated:Terminated with error:
REP-300: ORACLE error occurred.
Can any one help us
Thanks in advance.
Kumar

Please see
REP-0004 Warning - Unable to Open User Preference File. (Doc ID 26014.1)
ApPsMaStI
sharing is Caring

Email pdf files XML report error

Hi,
I have a conc prog which bursts pdf invoices and then it will send an email to given email id.
we are storing email id's in a custom table as
invoice number email address
xxxx123 [email protected]
yyyy234 [email protected]
zzzz456 [email protected],[email protected]
when we run the conc prog for xxxx123 invoice then it is creating pdfs as well as sending an email to [email protected] address.
But when we run for zzzz456 then it is creating pdfs and sending an email to [email protected],[email protected] email addresses.
But the issue is if for the invoice zzzz456 any of the email address from [email protected],[email protected] is invalid email id then it is not sending an email to any of the email address.It suppose to send an email to right email id and it should bounce for other invliad email id.
I have tried for single email id(some junk email id) also,But Samething happend no email or no bounce back email.
Could you please suggest me how can i handle this issue.

Hi Gareth,
Thank you very much for your quik reply.
Actually I developed this thing from your post only.Thank you very much for that posting.
Here I am pasting my xml bursting control file code.
<?xml version="1.0" encoding="UTF-8"?>


<xapi:requestset xmlns:xapi="http://xmlns.oracle.com/oxp/xapi" type ="bursting">
<xapi:request select="/XXXXINVOU/LIST_G_INVOICE_HDR/G_INVOICE_HDR">
<xapi:delivery>
<xapi:filesystem id="file" output = "${CF_PDF_DIR}/${D_PDF_FILE_NAME}"/>
<xapi:email server="smtp.XXXXmai.com" port="25"
from="[email protected]" reply-to ="">
<xapi:message id="123" to="${TO_EMAIL}" cc="[email protected]" attachment="false" content-type="text/html" subject="${MAIL_SUBJECT}">
<![CDATA[
<html>
<head>
<style type="text/css">
body {font-family:Times New Roman}
</style>
</head>
<body>
Dear Valued Customer:
Your XXXXmai Technologies, Inc. invoice for ${D_CUSTNAME} is now available on the EdgeControl Management Center (ECMC) at http://control.XXXXmai.com
<DL><DD>Invoice Number: ${INVOICE_NUMBER}
</DD></DL/>
<DL><DD>Invoice Date: ${CP_INV_DATE}
</DD></DL/>
<DL><DD>Invoice Due Date: ${CP_DUE_DATE}
</DD></DL/>
<DL><DD>Invoice Amount: ${CS_CURRENT_CHARGES}
</DD></DL/>
For ECMC support, please contact [email protected] or call 1-877-4XXXXTEC, Option 1.
Please do not reply to this message.
Regards,
XXXXmai Technologies, Inc.
</body></html>]]>
</xapi:message>
</xapi:email>
</xapi:delivery>
<xapi:document output-type="pdf" delivery="123">
<xapi:template type="rtf" location="xdo://XXXXM_AR.XXXXINVOU1.en.US/?getSource=true" filter=".//G_INVOICE_HDR[C_ORG_ID = 240 or C_ORG_ID = 330 or C_ORG_ID = 407 or C_ORG_ID = 994 or C_ORG_ID = 1174 ]"></xapi:template>
<xapi:template type="rtf" location="xdo://XXXXM_AR.XXXXINVOU1_AUSTRALIA.en.US/?getSource=true" filter=".//G_INVOICE_HDR[C_ORG_ID = 592]"></xapi:template>
<xapi:template type="rtf" location="xdo://XXXXM_AR.XXXXINVOU1_JAPAN.en.US/?getSource=true" filter=".//G_INVOICE_HDR[C_ORG_ID = 550]"></xapi:template>
<xapi:template type="rtf" location="xdo://XXXXM_AR.XXXXINVOU1_SWEDEN.en.US/?getSource=true" filter=".//G_INVOICE_HDR[C_ORG_ID = 852 or C_ORG_ID = 1913 or C_ORG_ID = 1973 or C_ORG_ID = 1873 ]"></xapi:template>
<xapi:template type="rtf" location="xdo://XXXXM_AR.XXXXINVOU1_GENERIC.en.US/?getSource=true" filter=".//G_INVOICE_HDR[C_ORG_ID != 240 and C_ORG_ID != 330 and C_ORG_ID != 407 and C_ORG_ID != 550 and C_ORG_ID != 592 and C_ORG_ID != 994 and C_ORG_ID != 1174 and C_ORG_ID != 852 and C_ORG_ID != 1913 and C_ORG_ID != 1973 and C_ORG_ID != 1873]"></xapi:template>
</xapi:document>
</xapi:request>
</xapi:requestset>
Could you please tell me where should i make the change.TO_EMAIL is coming from rdf formule column.
As I said earlier i am storing multiple email addresses in a custom table for each invoice.I am fetching the email id in a formula column for that particular invoice and trying to send an email.Custom table may not have email id for all the invoices.we are storing the email addresses only for the invoices to be emailed.
Could you please help me .
Thanks,
Malla

Xml report getting errored out

hi friends
i have one custom xml report with ten parameters whenever i submiteing concurrent program with mandatory paramas it will getting succesfully completed
without requirement out put. Again whenever i submiteed program with mandatory params and non mandatory parameters it will getting errored out .
the error was below
Enter Password:
MSG-01275: Date select AND afrm.certificate_date BETWEEN :P_FROM_DATE and :P_TO_DATE
01-OCT-11 31-DEC-11
REP-1276: Placeholder 'CP_PARENT_NAME' references one or more non-formula columns.
REP-0069: Internal error
REP-57054: In-process job terminated:Terminated with error:
REP-1276: Placeholder 'CP_PARENT_NAME' references one or more non-formula columns.
thanks
chandra

Hi Chandra,
There might be a problem with your .rdf.
Please check the formula column and use srw.message functionality to debug.
And please enable Trace option while you are running the report.
So that you can get more info about the errors.

XML Report with EXCEL output errors out intermittently

Hi Gurus,
We have a custom XML report running for a particular user for whom it is failing intermittently.
The program does not return any error in log file.
I also checked the OPP log file but coud not find any issues / errors.
But Standard manager log file has the below error when the request fails :
Process monitor session started : 14-SEP-2012 10:25:30*
Found running request 2823013 attached to dead manager process.*
Setting request status to completed.*
fdugpi has recovered SRW driver value*
Found dead process: spid=(3076), cpid=(236068), ORA pid=(65), manager=(0/0)*
Starting STANDARD Concurrent Manager : 14-SEP-2012 10:25:31*
Process monitor session ended : 14-SEP-2012 10:25:31*
Please help me out to figure out what is the issue here. Also the standard manager process has died and got restarted.
We are on 12.1.3 application version with 11gR1 database
Regards,
Ram

You can use BI publisher for your requirement -
Create a Concurrent program which is based on the executable 'XDODTEXE'
The Short_Name of the concurrent program should be the same as the data_definition short_name from Xml Publisher responsibility.
You can go through the link provided by Alex for creating the UI Template and the data template.
Cheers,
VB

Digital Signature in XML Report

Hi Friends,
In Oracle EBS R12, I have a custom XML report developed and running fine.
There is a requirement to add the feature of Digital Signature in the output of this report. Please help me with the detailed steps to achieve this.
PS: I have tried a few links from Google and Article notes from oracle support. But, no success.
If anyone has implemented this successfully, some hints would be of great help.
The XML report is form-16 of employees.
Regards,
Gursangat

Duplicate thread (please post only once).
How to add a digital signature in xml publisher report
How to add a digital signature in xml publisher report

Crystal Report 2008 SP2 & InfoView: Custom XML Export doesnt work

Hi,
I have created a Crystal Report .rpt and want to use the custom xml export function to output a custom xml file. For that, I created a custom transformation file (xsl) and imported it into the .rpt . On the client machine, if I open the .rpt with Crystal Reports 2008 SP2, and select to export it using the custom xml output, all runs fine. (under SP1, only half the file was created...)
If I upload the .rpt file to Infoview (server-side: BO Enterprise 3.1, SP2 as well) and schedule it, I can select xml, and then my custom xml as output format, but I am getting the error message u201EUngültige Exportoptionen" (="invalid export options"), in the instance history. No output file is created. I use file system as destination. Other output formats like .pdf and .rpt work fine and files are created.
Ideas:
-Are there any more settings needed on the server (e.g.CMC - Crystal Server Jobs, other Processes, ...) so I can schedule the report and successfully create the custom xml format file as output?
-Do I need to upgrade to a specific SP or FP on server-side so everything runs smooth?
Thanks for your help!

Hi Florian,
I'm having the same problem, have you by any chance found a solution?
Gajus.

XML Publisher Report Error

Hi All,
I am trying to create an xml report from a standard oracle report. For that, I have copied the standard report's concurrent program and created a custom concurrent program by changing the output from 'Text' to 'XML'. When I run the custom report and took a look at the output of the concurrent program, I see the below error:
An invalid character was found in text content. Error processing resource 'http://...
<DESCRIPTION>CD
t:1em;text-indent:-2em">- <G_ITEM>
<C_FLEX_ITEM>44-5555-66</C_FLEX_ITEM>
<DESCRIPTION>ABCD W/O PRRS</DESCRIPTION>
- <LIST_G_VENDOR>
- <G_VENDOR>
<VENDOR>VENDOR 123</VENDOR>
I see that the error is because, the xml parser has encountered a charecter '/' in the tag 'DESCRIPTION', which it is getting confused with the ending tag.
The charecter may be deleted if it as the case with the description of one item, but there are numerous item descriptions with / in them.
If this is the limitation of XML Publisher, could anyone please help me with the approach to create these kind of reports in XML Publisher?
Thanks in advance.

Well, I figured out what the problem was.

XML Report Publisher program is erroring out

Hi All,
I've customized the AR Customer Statements.
I've created a data definition as "ARXSGP" and uploded the sample_output.xml of Statement Generation Program to it. Also I've created a Data template as "ARXSGPO" and attached the data definition "ARXSGP" to it and uploaded the customized rtf file "XXHCC_CLE_F_ARCUSBALSL.rtf" and set the default output type to PDF.
As I donot wish to call the XML Report Publisher program manually every time when I Print the Statements through Print Documents-->Statements.
So I've done the below customization in ARXSGP.rdf file ie; Print Statements Report which is an Oracle Report.
I've added the below code in After Report trigger.
=======================================
FUNCTION AfterReport
RETURN BOOLEAN
IS
BEGIN
Below code added for Customer Statement Case Study
DECLARE
l_req_id NUMBER := 0;
L_XML_LAYOUT BOOLEAN := TRUE;
BEGIN
L_XML_LAYOUT := FND_REQUEST.ADD_LAYOUT (TEMPLATE_APPL_NAME => 'AR', TEMPLATE_CODE => 'ARXSGP', TEMPLATE_LANGUAGE => 'en', TEMPLATE_TERRITORY => 'US', OUTPUT_FORMAT => 'PDF');
IF L_XML_LAYOUT THEN
srw.message(20001, 'Template is picked ');
srw.message(20002,'Concurrent request Id : '||:p_conc_request_id);
l_req_id := FND_REQUEST.SUBMIT_REQUEST('XDO',
'XDOREPPB',
NULL,
NULL,
FALSE,
:p_conc_request_id,
222, -- Receivables
'ARXSGPO', -- Statement Generate
'en-US', -- English
'N',
'RTF',
'PDF');
IF l_req_id > 0 THEN
COMMIT;
ELSE
srw.message(20004, 'Failed to submit request');
END IF;
ELSE -- Not L_XML_LAYOUT
srw.message(20005, 'Template is not picked ');
END IF;
END;
--------------------Code Ends----------------------------
SRW.USER_EXIT('FND SRWEXIT');
RETURN (TRUE);
END;
==============================================
After Printing the Statements through Print Documents-->Statements
Statement Generation Program is being called and later XML Report Publisher program is also being invoked.
But the XML Report Publisher Program is erroring out with below error.
XML Publisher: Version : 12.0.0
Copyright (c) 1979, 1999, Oracle Corporation. All rights reserved.
XDOREPPB module: XML Report Publisher
Current system time is 03-SEP-2012 17:42:18
Oracle XML Publisher 5.6.3
java.lang.NumberFormatException: For input string: "ARXSGPO"
     at java.lang.NumberFormatException.forInputString(NumberFormatException.java:48)
     at java.lang.Integer.parseInt(Integer.java:447)
     at java.lang.Integer.parseInt(Integer.java:497)
     at oracle.apps.xdo.oa.cp.JCP4XMLPublisher.runProgram(JCP4XMLPublisher.java:215)
     at oracle.apps.fnd.cp.request.Run.main(Run.java:157)
Start of log messages from FND_FILE
End of log messages from FND_FILE
Executing request completion options...
Output file size:
0
------------- 1) PUBLISH -------------
Disabling requested Output Post Processing. Nothing to process. The output of the request is zero byte.
Finished executing request completion options.
Concurrent request completed
Current system time is 03-SEP-2012 17:42:22
Please help out with a solution.
Thanks,
Tech D

for r12 add one row for parameter "Dummy for Data Security" from desc of XDOREPPB
follow works for me
SQL> set serveroutput on
SQL>
SQL> declare
2    v_request_id   number;
3 begin
4
5   begin fnd_global.apps_initialize(0, 20419, 0); end;
6   v_request_id := FND_REQUEST.SUBMIT_REQUEST('XDO',
7                                              'XDOREPPB',
8                                              NULL,
9                                              NULL,
10                                              FALSE,
11                                              'N', -- Dummy for Data Security
12                                              9888637, -- Request
13                                              0, -- Template Application
14                                              'XXAND10_1', -- Template
15                                              'en-US', -- Template Locale
16                                              'N', -- Debug Flag
17                                              'RTF', -- Template Type
18                                              'RTF' -- Output Format
19                                              );
20
21    dbms_output.put_line(v_request_id);
22    if v_request_id > 0 then
23      dbms_output.put_line('successfully submitted.');
24      commit;
25    else
26      dbms_output.put_line('not submitted.');
27      rollback;
28    end if;
29
30 end;
31 /
9888651
successfully submitted.
PL/SQL procedure successfully completed
SQL> 'Y' for "Dummy for Data Security" also works for me
SQL> declare
2    v_request_id   number;
3 begin
4
5   begin fnd_global.apps_initialize(0, 20419, 0); end;
6   v_request_id := FND_REQUEST.SUBMIT_REQUEST('XDO',
7                                              'XDOREPPB',
8                                              NULL,
9                                              NULL,
10                                              FALSE,
11                                              'Y', -- Dummy for Data Security
12                                              9888637, -- Request
13                                              0, -- Template Application
14                                              'XXAND10_1', -- Template
15                                              'en-US', -- Template Locale
16                                              'N', -- Debug Flag
17                                              'RTF', -- Template Type
18                                              'RTF' -- Output Format
19                                              );
20
21    dbms_output.put_line(v_request_id);
22    if v_request_id > 0 then
23      dbms_output.put_line('successfully submitted.');
24      commit;
25    else
26      dbms_output.put_line('not submitted.');
27      rollback;
28    end if;
29
30 end;
31 /
9888652
successfully submitted.
PL/SQL procedure successfully completed
SQL>

Customized XML Report error in Arabic Instance

Similar Messages

Maybe you are looking for