Customizing Distribution - anyone using successfully?

Hi!
We are planning an SAP IS-U and CRM implementation and I hav read about the potential benefits of using the Customizing Distribution in SAP Solution Manager to keep customizing synchronised between IS-U and CRM.
However, I have also read advise suggesting that it is difficult to use, not very mature and should only be considered  for complex solutions with an experienced support team.
Is there anyone out there who has some advice, based on actual use in an ERP( or IS-U) /CRM Landscape?  What are your experiences?  Are the benefits worth the effort?
Many thanks!

I haven't used it, but it sounds like you are looking at just two of the many products based on the DisplayLink USB video standard.
The little I've read about them says that they work, but will appear to lag compared to true built-in and DVI monitors. That's just because USB doesn't have the bandwidth of a real video card. This won't be a problem if you're just doing office stuff, but you might not like it if you are trying to do anything involving lots of motion.

Similar Messages

  • What sustain pedal - exact make, model, type (momentary) is anyone using successfully on their controller? (I'm using m-audio)

    what sustain pedal - exact make, model, type (momentary?) is anyone using successfully on their keyboard
    ? (I'm using m-audio controller)

    I took an old Guitar cable, snipped off one plug, connected strand one to a metal plate and strand two to the metal part of a weighted lever. Plug it into the sustain port of my midikeybs. Press the lever onto the metal plate: sustain on. Let go: sustain off.
    Even simpler: take a cable with a (mono) plug at on end and the naked two strands (mantel & core) on the other side. If you connect the two strands: sustain! if you disconnect the strands: sustain off.
    What I am trying to say is: a sustain pedal is as simple as a doorbel button: on or off. So all that "the maker" can provide is "built quality", but really, any improvised simple momentary contact switch will do. In other words: there's really NO electronics to it, and if it is sold as a MIDI sustain pedal, it 'll work. But a doorbell button connected to jack cable will also work, so make and model (for a pure sustain-only pedal) are irrelevant.

  • How to create Exchange dynamic distribution list using multivalue extension custom attribute

    I am trying to create a dynamic distribution list using an ExtensionCustomAttribute.  I am in hybrid mode with Exchange 2013.  The syntax I have is this: 
    New-DynamicDistributionGroup -Name "DG_NH" -RecipientFilter {(ExtensionCustomAttribute2 -eq 'NH')} 
    This works correctly on-prem.  But hosted always results in an empty list.  I can see in dirsync the attribute is in the hosted environment, but for whatever reason, the distribution group gets created but always come up null.
    If I create a group looking at the single valued attributes, such as CustomAttribute6 -eq 'Y', it works correctly on-prem and hosted.  
    If anyone has any suggestions I would appreciate it.

    I don't think I provided enough information about the problem.  Let me add some and see if it makes sense.
    I have an Exchange 2013 on-premise configured in hybrid mode with Office365.  For testing purposes, I have 2 users, Joe and Steve, one with the mailbox on-prem, and the other with the mailbox in the cloud.  Each of them has CustomAttribute6 = 'Y'
    and ExtensionCustomAttribute2 = 'NH'. Dirsync shows these users and these attributes are synced between on-prem and cloud.
    Using on-prem Exchange powershell, I run the following command:
    New-DynamicDistributionGroup -Name "DG_NH" -RecipientFilter {((RecipientType -eq UserMailBox) -or (RecipientType -eq MailUser) -and (CustomAttribute6 -eq 'Y')} 
    This correctly finds the 2 users when I query for them as follows:
    $DDG = Get-DynamicDistributionGroup DG_NH
    Get-Recipient -RecipientPreviewFilter $DDG.RecipientFilter | FT alias
    So I then delete this DG, and recreate it this time looking at the multi-value attribute ExtensionCustomAttribute2, as follows:
    New-DynamicDistributionGroup -Name "DG_NH" -RecipientFilter {((RecipientType -eq UserMailBox) -or (RecipientType -eq MailUser) -and (ExtensionCustomAttribute2 -eq 'NH')} 
    Replaying the query above, I can see this also works fine and finds my two users.
    Next I open a new powershell and connect to Office 365 and repeat the process there.
    New-DynamicDistributionGroup -Name "DG_NH" -RecipientFilter {((RecipientType -eq UserMailBox) -or (RecipientType -eq MailUser) -and (CustomAttribute6 -eq 'Y')} 
    This correctly finds the 2 users when I query for them.
    And then delete the group and recreate it using the multi-value attribute:
    New-DynamicDistributionGroup -Name "DG_NH" -RecipientFilter {((RecipientType -eq UserMailBox) -or (RecipientType -eq MailUser) -and (ExtensionCustomAttribute2 -eq 'NH')} 
    When I run the query this time it produces no result.  Every test I try results in an empty group if I am using a multi-valued attribute in the search criteria in the cloud.  If I use single valued attribute, it works fine.
    I really need to be able to get multi-valued DDG's working in the cloud.  If anyone has done this and has any suggestions, I would appreciate seeing what you did.  And if this is the wrong forum to port this, if you can point me to a more suitable
    forum I will report there.
    Thanks,
    Richard

  • Has anyone been successful in using a HP scanjet on Windows 7 Professional XP Mode?

    has anyone been successful in using a HP scanjet on Windows 7 Professional XP Mode?

    Hi there,
    Could you provide the community with a little more information to help narrow troubleshooting? Which scanjet are you using?
    You can say thanks by clicking the Kudos Star in my post. If my post resolves your problem, please mark it as Accepted Solution so others can benefit too.

  • Has anyone had success using NI PCI cards at -20C? My specific needs are for RS-422/482 and GPIB cards.

    NI cards have been qualified to operate only to zero degrees C. I need serial abd GPIB PCI cards that operate to -20C for military application. Has anyone had success using these cards at this lower operating temperature?

    Hi,
    I am not sure if this helps, but the ENET-232 is spec'd to operation at -40 degrees C.
    Best Regards,
    Aaron K.
    Application Engineer
    National Instruments

  • Has anyone had success using the player in a facebook newsfeed

    I'd like to use the player as a previewer in a facebook newsfeed. Has anyone had success? Is there a recipe for this?
    Thanks,
       Leo

    The Juniper VPN is a SSL-based VPN solution whereas the native client supports L2TP and PPTP only - in other words they're completely different beasts.
    That said, you shouldn't have any issue connecting to the SSL-VPN. I do it almost daily. You may need to be running the latest (or at least, recent) software on the Juniper box, though - earlier versions of the Juniper software had problems.

  • Has anyone had success using SharePoint and FrameMaker 10 together using CMS?

    Has anyone had success using SharePoint and FrameMaker 10 together using CMS?

    Thanks for reminding to at least update the results thus far.
    Update 4:
    I did get quite a bit of support initially although slowly over a period of a month or so. After Adobe FM support and my SharePoint systems engineer reviewed how FM10 was setup on my computer (which I am the admin for our department’s SP site) and how it interfaces with our SharePoint 2010 Enterprise Edition, there was two conclusions:
    Basically Adobe FM Support said that FM10 did not support claims-based authentication and they can no longer help me. They said it will work with FM11 when it comes out.
    My SP Systems Engineer, said that FM10 is connecting to SP 2010 just fine but that the FM10 has a software glitch that causes FM10 lose control when executing checkout procedure within FM10. I can checkout and edit that same file in SP with no problems.
    About a month later, I upgraded to FM11 and ran into the same problem. I attempted to get Adobe FM Support to help and they said they will look into and get back to me. That was in July and I have not heard anything more from them, and to be honest, my schedule has been extremely busy the last 5 months that I have not had time to pursue it any further.
    Needless to say, I was very disappointed with the SP interface and, overall, the lackluster support I received from Adobe. Having a working SP interface was one of the criteria for purchasing TCS3.5 (and subsequent upgrade) in the first place.
    One thing of note, we migrated from SP 2007 to SP 2010 in February 2011 and, at the time of Adobe support, I still had access to my SP 2007 site. FM10 and FM11 had to no issues working with SP2007. Unfortunately, SP 2007 is not an option for me anymore.
    Also, another observation of FM10/11 not working with SP 2010, it seems that FM10/11 is automatically configured to work with SharePoint Drafts folder locally when connecting to the SharePoint library. This worked just fine with SP 2007 but SP 2010 does not use SharePoint Drafts folder locally the same way (the programming changed, don’t recall where I saw it, probably when searching this issue online)  and I suspect that is one of the main issues why it does not work correctly.
    So at this time, I have not found a working solution to this problem.

  • Anyone use Citrix receiver (11.8.2) successfully on Yosemite yet?

    Anyone use Citrix receiver (11.8.2) successfully on Yosemite yet?
    I want to upgrade, but this is the 1 app that has to work for me before I take the leap.

    DrDavidW,
    After seeing your failed upgrade, I decided to upgrade one of my wife's laptops that had Citrix Receiver installed. The hardware is a late 2008 Macbook Pro 15" with 2.4 GHz Intel Core 2 Duo, 8 GB 1067 MHz DDR3 RAM, and 250 GB SATA Disk that has 212.99 GB free. Citrix version is 11.8.2. I used a bootable USB Yosemite installer to do the upgrade. My wife was able to log onto her Citrix Receiver without issue. I wonder whether it is a network issue rather than a application issue. I have seen some reports of wifi connection problems with Yosemite upgraders. Maybe someone in IT can help. Are you having any trouble with using Safari accessing other sites?

  • GTX 700 series-anyone using on Mac Tower successfully?

    We have been using GTX680 cards on our numerous 12core macs running PPro.
    We have another 12core which needs new gfx card. GTX680 can't be easily found anymore. So looking at 700 series...but can't find any info for Mac. Nvidia does not specify Mac or PC for 700 series.  I see the newest iMacs are shipping with the 700 series.
    Thoughts? Anyone using gtx700 series on Mac?
    We are running latest PPro...OS-10.8.5...not mavericks.
    Thanks for any input.
    philc

    philc452 wrote:
    Should I be concerned?
    Currently upon Boot Up I only see grey screen until machine has finished power up. This machine is using GTX680.
    Phil
    An unflashed PC nVidia card in a Mac Pro will run at PCI 1.0 speeds, not 2.0.  It also will not show you the grey Apple boot screen; nothing will show up until the OS actually begins booting.  Meaning you'll never be able to do network restores, or boot off of other devices.
    If you want a properly built Mac-enabled nVidia card, talk to this guy.

  • Send mail to distribution list using UTL_MAIL.SEND

    Oracle 10.2.0.4.0
    Does UTL_MAIL.SEND support sending mail to a distribution list?. The doc says, the recipient mail-id should be separated by a comma. The distribution list has mail-id separated by a comma. I executed a test case sending a mail to a distribution list, I did not receive any error or exception. I did not receive the test mail as well!!.
    Has anyone used the UTL_MAIL.SEND to send mails to a distribution list?.
    Thanks

    Has anyone used the UTL_MAIL.SEND to send mails to a distribution list?.Oracle RDBMS does not know or care is email address is single recipient or list.
    It sends message to name provided.
    It is up to MTA to deliver any message it gets.
    Are you 100% certain that message got to MTA & was successfully processed by it?

  • Java program "textcite" anyone had success running this program

    hi,
    i have installed java via pacman jre
    I try to start the text citation program TextCite which requires java 1.5 (i have 1.6.0.10).
    anyone
    http://textcite.sourceforge.net/
    I start this program from the terminal with:
    java -jar TextCite-1.3.jar
    Spash screen appears but than the program hangs. Wondering now if
    anyone had success. This is one of my "must have" applications
    thanks for your help

    I just started playing Warcraft quite a bit on my MBP 2008 15". I customized my MBP pretty nice with 4GB RAM, etc.
    I have generally had no problems. In fact, my MBP performs better than the rather nicely spec'd PC I used to run Warcraft on. I can set the Warcraft video settings pretty high and still get at least decent framerates. Crowded cities the FR goes down to maybe around 20 which is no biggie - where you want your FR's good is in instances/raids. My FR's in those go way up to 50-70...smooth, even with effect settings pretty high and max resolution on my external monitor I'm running the game on.
    My MBP will indeed get hot, fans whir, etc. Especially in cities. I ordered one of those Zephr's or whatever their called - a fan/heatsink built for MBP's to sit on to keep them a bit cooler. That should arrive soon.
    In the meantime I've been propping up my MPB off the desk service so that it gets plenty of air circulation underneath it...that seems to help with the heat actually quite a bit.

  • Anyone using ColorMunki Photo with Retina iMacs?

    I've been successfully using X-Rite's ColorMunki Photo to profile my current MacBook Pro display.  I just got a new iMac 27" Retina Display with the upgraded video card.
    Tried to profile the iMac, and couldn't get the luminance control in ColorMunki to work properly to adjust the desired (100) display luminance as an early stage of profiling.  So went ahead and went thru the profiling process, came to "Save" and did that, and the display turned posterized!  I finally was able to figure out how to get back to the 'standard" profile and get rid of the custom profile, but not a pleasant experience.
    Has anyone used the ColorMunki to successfully profile their iMac Retina display?  Works fine on my MacBook Pro's Retina display, but goes haywire on the iMac.
    I will contact X-Rite tomorrow, but would appreciate anything you could pass along on this.
    Rick

    ADC doesn't work with all monitors with all profiling solutions, so you just have to try it and see if it works. If not, then you always have to remember to turn that check box so you can set the brightness and other settings ADC would normally do manually.
    Check the System Preference under Keyboard (Shortcuts tab), and make sure the keys to increase or decrease brightness are off.

  • Error in updating custom database table using UPDATE SET Command

    Hi,
    I developed an automated collection system program in one of our clients simulating FBE1 (Payment Advice Creation) and F-28 (Posting of Incoming Payments) transaction codes. Upon posting, we encountered an error in PRD server wherein, for some of the posted items, the STATUS field in our custom table was not successfully updated. We tried to reverse the clearing document and debug the program. Upon posting, we were able to successfully update the status. We could not simulate the error in QAS since all the postings in QAS were successful and all status' relating to these postings were updated as well. We tried posting multiple times and the program seems to be working fine. In PRD, this behavior is just random and there is no specific pattern as to how the error occured. Provided below is the code I used for updating custom table ZFIACSF28. The STATUS field should be equal to '4' once the posting is successful. We are not sure if this is a database related issue. 7 users are authorized to do the postings in PRD and they are using the same user account.
    CODE:
      CALL TRANSACTION 'F-28' USING gt_bdcdata
                              MODE   'E'
                              UPDATE 'S'
                              MESSAGES INTO gt_messtab.
      READ TABLE gt_messtab INTO wa_messtab WITH KEY msgtyp = 'S'
                                                     msgnr  = '312'.
      IF sy-subrc EQ 0.
    update status for items cleared bearing the same OR Number*
        UPDATE zfiacsf28 SET status       = '4'
                             zsapdocument = wa_messtab-msgv1(10)
                             zruntime     = sy-uzeit
                             zrundate     = sy-datum
                       WHERE zor          = gv_zor
                       AND   customer     = gv_customer.
        COMMIT WORK.
    ENDIF.

    Hi,
    it's not possible that status isn't updated in zfiacsf28 while date and time are updated there, because it's hard coded.
    There must be other programs that also change your table zfiacsf28 and maybe clear those fields. Maybe the key fields zor and customer cannot provide  duplicate access, what is the meaning of field zor ?
    Please check the where used list of table zfiacsf28 to find other update programs.
    Regards,
    Klaus

  • Anyone using ms sqlserver standard edition with XI 3.0

    wondering if anyone is successfully using ms sqlserver standard edition (not enterprise edition) with XI 3.0. I would like to set up a dev/test XI system and the standard sqlserver edition is less expensive than enterprise edition. I would like to confirm that it works ok first.
    thanks-

    Henry,
    I haven't tried but I think it will be successful with mssql server standard edition also. The following link gives the key difference between standard and enterprise edition.
    http://www.databasejournal.com/img/RS_servereditions_code.html
    Best of luck!
    regards,
    Felix

  • Create a custom web template using VS 2012 with web features,site features sections applied

    hi,
     Want to create a  custom web template using VS 2012  in my SP 2013 environment.  i know "Vesku" has posted a great artice on this [  based on prev. version of SP].
    here -
    http://blogs.msdn.com/b/vesku/archive/2010/10/14/sharepoint-2010-and-web-templates.aspx
    i am  looking for a code based article  which has step by step process which provides how to add the site features, web features and attach the eventreceivers etc etc on sitecollection creation when i apply this template from central admin. 
    can anyone provide me any links / any source how to create a custom web template with one / two  custom features -  site features element and web features element , / master page etc ....
    I am stuck with this. as part of my reqmnt, i need to create a webtemplate with all the customlistinstances, custompagelayouts, custom masterpages, custom appln pages, custom web parts.
    help is appreciated !
    Das

    The problem is that Web Templates are deployed to a gallery in a site collection and aren't available in Central Admin when creating a new site collection.  YOu have to create the site collection without choosing a template and then choose your web
    template when you first access the root site in the site collection.  Here's an article that discusses that process here:
    http://sharepointchick.com/archive/2011/02/10/using-web-templates-to-create-site-collections.aspx
    Other than that Vesa's article is still the best one and works essentially the same in 2013 as it does in 2010.
    Paul Stork SharePoint Server MVP
    Principal Architect: Blue Chip Consulting Group
    Blog: http://dontpapanic.com/blog
    Twitter: Follow @pstork
    Please remember to mark your question as "answered" if this solves your problem.

Maybe you are looking for