Customizing for LCA Settings /SAPAPO/OM_CUSTOMIZE

Hi,
With abap /SAPAPO/OM_CUSTOMIZE you can do some live cache settings. One option is to compress DP time series.
Does anybody know what happens when you switch on this setting?
I have found this report via transaction /sapapo/om00.
thanks for your response
Jean Vroemen

Hello Jean Vroemen,
-> As you know, the report /SAPAPO/OM_CUSTOMIZE has title "Customizing for LCA Settings".
    This report is used for the customizing some LCA parameters. The settings could be recommended
    by the LCA developers only, if it's needed. Please dont change any of the LCA customizing
    parameters if you was NOT advised from SAP LCA development support to do so !
-> The flag "compress DP time series" defines the storage format of time series in DP.
     The LCA development introduced this flag in release SCM 5.0, but this flag is still a project
     for pilot customers only in SCM 5.0.
     If you have interest to participate in this project, please create the ticket to the component
     'BC-DB-LCA', the status of the system SPs stack need to be checked & DP application scenario
     reviewed first.
     As of SCM 5.1 this flag set by default for storing time series data to the compressed format.
     And the report /SAPAPO/OM_CUSTOMIZE run in SCM 5.1 will have the unchecked box for the
     LCA customize-parameter "Non-Compressed Store for DP Time Series".
Thank you and best regards, Natalia Khlopina

Similar Messages

How to create an Internal Customer for Ineterplant stock Transfer

Daer Gurus,
Please tell me how to create an Internal Customer for Interplant stock transfer.
Actually I have three plants out of them two plants are providing goods to third plant. Also both the plants do the stock transfer in eachother.
How to maintain the Two plants as supplier and third one as a receiver plant.
which account group I should use and what details I have to use for it ? Do I need to maintain all three plants under same account group? I know the theoratical process only for stock transfer please guide me on this Internal customer issue.
thanks in advance
regards,
Sanjay

Hi,
Take your three plants as AAAA, BBBB and CCCC.... and these 3 plants may be assigned to the Sales Area of AAA 10 10, BBB 10 10 and CCC 10 10.
Your STO will have following 4 flows.
1. AAAA - CCCC
2. AAAA - BBBB
3. BBBB- CCCC
4. BBBB- AAAA
you need to do the following settings...
1. Assign the Sales Area for the Shipping Plants... for ex (AAAA - AAA 10 10 and BBBB - BBB 10 10)
2. You need to Create a Internal Customer for every Rec. Plant and need to assign the same to the Rec Plant. And Also note that this customer needs to be created in the Sales Area which is assigned in the Shipping Plant.
(Note that CCCC will be Rec Plant from Both AAAA and BBBB... So you need to extend that customer for both the Sales Area of the plants AAAA and BBBB)
Following is the example settings required for our scenario 1.
AAAA will be a supplying plant and CCCC will be rec. plant.... for this you need to create a internal Customer (for ex C1000) in Sales area AAA 10 10 (which is assigned to the plant AAAA) and assign the Customer number (C1000) to Plant CCCC.
Now you created a plant CCCC as a customer in Sales Area AAA 10 10 (which is nothing but plant AAAA)...
Also here you need assign the Sales Area AAA 10 10 to the Plant AAAA.
Hope this will be useful to you.
Thanks,
Muthu

In Keynote09, if i set custom presenter display settings (large presenter notes), and i save the file, will i see my notes in the same way on another computer? Are the presenter display setting saved in the file?

In Keynote09, if i set custom presenter display settings (large presenter notes), and i save the file, will i see my notes in the same way on another computer?
Are the presenter display setting saved in the file?
Thanks for your help!

it wont.
Presenter note display is set per machine.
Surprising nobody in this community knew this.

Block Customer for Particular Storage Location

Hi.
I want to Block a Customer for Particular Storage location.
ie plant 1000(St Loc 01,02)
plant 2000(St Loc 03,04)
Block Customer XYZ for Plant 2000 & Sto Loc 03
is this possible?
Reg.
Amol

Through standard settings, this is not possible. Try with USEREXIT_SOURCE_DETERMINATION (MV45AFZB) where you have to define the storage location and the customer code.
thanks
G. Lakshmipathi

No position management procedure could by found in Customizing for 57

Hello
I get in FTR_CREATE the error
No position management procedure could by found in Customizing for position CoCd:BPO1 ValArea001 ValCls0003 Trans.:\INTERN\0057.
But a product category or product type 57 does not exist?
I am creating a 62C interest rate swap.
Even if I assign 62C

Hi,
You need to assign a posn mgmt procedure in IMG for ValArea001 and ValCls0003.
you can do this in FSCM > TRM > Txn Manager > Gen. Settings > Acctg > Settings for Position Management > ASSIGN POSITION MANAGEMENT PROCEDURE.
Regards

Source System BW - what is "Customizing for extractors" etc.

Hi,
Can somebody explain IN DETAIL what is the purpose of
1)Customizing for the extractors
2)Transfer Global settings
3)Transfer exchange rates
I could not find any documentation in help.sap.com. Is there any documentation?
thanks a lot

Jay,
1)Customizing for the extractors
This is to modify/control the data transfer settings of the particular source system. It takes you to the SBIW screen (Implementation Guide) directly in the source system. Here you can control your datapacket size, number of datapackets for each IDoc etc. From this screen, you cal also maintain the datasources. All the activities realting to 'maintenance of datasources' can be accessed from here.
2)Transfer Global settings
Global tabls such as Fiscal Period tables, Fiscal variant values are transferred to BW from the R/3 system where they are maintained. Do a lookup on tables T00* in SE11 and you can see a bunch of tables.
3)Transfer exchange rates
Similar to the above tables, different exchange rates are maintained in the R/3 system. These gets transferred to BW. tables such as TCURR, TCURC, TCURV etc. These are called Global settings.
Hope it helps
Gova

Plants abroad: Customizing for stock transfer between plants, EC Sales list

Hello,
Please advice how the customizing for tax codes (output and input tax) should be done in order to get the SJ documents (stock transfer proformas) listed correctly in EC Sales list. Now the SJ documents are listed correctly in VAT report (S_ALR_87012357) but are not listed at all in EC Sales list (S_ALR_87012400) - and the correct situation is when they are listed in both reports (the amounts should correspond with each other). The main question is how to set up correctly the EU code (values 1, 3 or 9) in the tax code settings for three tax codes below:
1. output tax of departure country
2. output tax of recipient country (destination ctry) and
3. input tax of recipient country
Pls note that 2 and 3 together form the acquisition tax of the destination country.
Above three tax codes are now listed in VAT report but not listed in EC Sales list for departure country at all. SJ document should be listed in EC Sales list using the reporting country = departure country.
Any valuable advices warmly welcomed,
Kind regards,
Slawek

Dear Kumar
Please check the links
[Plants Abroad|http://help.sap.com/saphelp_46c/helpdata/en/e5/077f984acd11d182b90000e829fbfe/frameset.htm]
[Plants abroad: Sales-specific settings |http://help.sap.com/saphelp_46c/helpdata/en/34/60b19dae724effe10000009b38f91f/frameset.htm]
thanks
G. Lakshmipathi

How to activate Extended Rebate Processing in Customizing for billing?

sap gurus:
How to activate Extended Rebate Processing in Customizing for billing?

SAP Knowledge Base Article
1520390 - Activation of Enhanced Rebate Functionalities - IMG Customizing Transactions - SAP Menu
Version 1 Validity: 19.10.2010 - active
Language English
Symptom
Enhanced Rebate Functionality is not available and should be activated
In the customizing IMG (Transaction SPRO) the node for Extended Rebate with the relevant customizing transactions are not visible
The SAP Menu does not include the transactions for Extended Rebate
Environment Enterprise Function EA-ISE must be available in the system (visible in transaction SFW5).
Reproducing the Issue
Call transaction SPRO
Node Extended Rebate Processing is missing:
IMG
Sales and Distribution
   > Billing
        > Rebate Processing
             > .................
Resolution To activate the Extended Rebate Processing and make the node and customizing transactions visible proceed in the following way:
Call transaction SFW5
In the folder ENTERPRISE_EXTENSIONS choose the function EA-ISE
Activate this enterprise extension
Thereafter the menu path in SPRO for Extended Rebate Processing will be visible:
IMG
Sales and Distribution
   > Billing
        > Rebate Processing
            > Extended Rebate Processing
                        * Settings for Agreement Types
                        * Set up Variable Key for Rebate Settlement
                        * Check Variable Key for Rebate Settlement
                        * Activate Extended Rebate Processing
                        * Simulate And Execute Reorganization of Statistical Data
Furthermore the users will have the relevant transactions available in the SAP Menu:
SAP menu
> Logistics
     > Sales and Distribution
          > Billing
               > Rebate
                    > Extended Rebate Processing
                         * RBT_ENH_VB7 - Extended Rebate Settlement
                         * RBT_ENH_ACT - Update of Indirect Sales
                         * RBT_ENH_PLAN - Update of Indirect Planning Data
For futher infomation on the extended rebate process please refer to the following links of SAP help portal:
http://help.sap.com/erp2005_ehp_04/helpdata/EN/5a/5b9b3c0f4da40ee10000000a11405a/frameset.htm
http://help.sap.com/erp2005_ehp_04/helpdata/EN/79/a5ee3c1f63a518e10000000a11405a/frameset.htm
Keywords
Extended rebate agreement, extended rebate processing, erweiterte Bonusabwicklung, Menü, Pfad nicht vorhanden, aktivieren, erweiterter Bonus, Bonusabsprache
Header Data
Released On
21.10.2010 08:01:20
Release Status
Released to Customer
Component
SD-BIL-RB-ENH Enhanced Rebates
Other Components
   SD-BIL-RB Rebate Processing
Priority
Normal
Category
How To
Product
Product
Product Version
SAP ERP Central Component
All versions
SAP R/3 Enterprise 4.7
All versions

Deleted default Photoshop CS5 Save for Web settings, but they return after a restart

How do I permanently delete the default Save for Web settings that come with Photoshop CS5? (Default Settings.iros, Background Image.iros, etc)
In CS4 you deleted them once, and they were gone. In CS5, if you delete them, they are recreated when you restart PS. Same goes for any Optimized Settings (GIF 32 Dithered.irs, JPEG Low.irs, etc), they simply can't be permanently removed, and I'm left scrolling through a long menu of things I'll never use.
I have no use for XHTML.iros, GIF 32 Dithered.irs, or any of these settings, just like I have no use for most of the stock presets in PS, why can't I customize these presets like I can customize everything else?

BlowPurp wrote:
>It's my observation that many of these files are auto-generated on the first run of Photoshop.
>It's possible the specific files you've referred-to are now simply auto-generated when they are found to be missing.
Yes, they are, how do I stop that?
I don't know that you can.
Ok, we have a way to save them, but not delete them, so what if I accidentally Save one I don't want? Or what if I Save one now, but later don't want it anymore. We're supposed to infer Adobe didn't intend us to ever Delete custom settings we Saved ourselves?!
I suppose there's an implication that you'll be given the defaults by Photoshop, but that anything you create yourself can be deleted by yourself. I admit it's not a very clear interface. For what it's worth, my own applications provide an explicit "Delete" capability, have defaults that don't manifest as actual files (and are always at the top of the list), and the app doesn't allow you to even try to delete the application-provided settings (Delete is grayed-out). I thought the whole settings thing through and tried to make sure it was more clear than parts of the Photoshop interface:
> Have you found some documentation from Adobe that states that you can effectively customize your installation by deleting these files?
Yes, in the FAQ: http://forums.adobe.com/thread/375776?tstart=0
Well, from what I can see that thread was written by someone other than an Adobe Employee, and it doesn't mention .iros files at all.
And what it seems to say is that you can reset your preferences to defaults (i.e., invoke auto-generation of a new prefs file) by deleting the old prefs file, which is what's happening for you.
-Noel

Custom Soft Proof Settings....

Hi....I'm looking for a way to save and load custom soft proof settings in AiCS4. The Adobe help docs say this is possible:
http://help.adobe.com/en_US/Illustrator/14.0/WS218910C1-B8D3-450b-AC31-9E6EA50C2BAD.html
...but my custom soft proof dialog doesn't give me the options. I'm wondering if it's possible.
Illustrator CS4 v14.0.0
Thanks,
Carl Stawicki

Well I re-did the monitor profiles with PMP 5 and got the same results - toggling Soft Proof on and off (Cntrl-Y) displayed a darker/yellow image when on.
Then I re-profiled both monitors with i!Match (I profiled the lesser, an HP-TFT display, and then matched the NEC IPS to it) and now Soft Proof works as it should.
Why did PMP 5 do this?
I ran PMP 5 on another Dell with a Dell monitor to see if I had overlooked some step or setting that was crucial and nothing leaped out at me.
This makes me wonder if I can depend on any profile from PMP 5.
cvt

Migration manager forgets to import custom IAC channel settings

it looks after "migrating settings" from 10.5.8 to 10.6 that the Migration manager forgets to import custom IAC channel settings.
cananybody tell me where they are stored and which files i would have to manually copy or do i have to re-create those IAC channels by hand?
thanks for any input...

Hi
The value of the Channel Strip volume etc is not stored within the C Strip setting, as you have discovered.
If you really wanted, you could add a Gain plug to the strip, with it set to give the correct output level with the Fader set to 0
(Or just set the fader manually in MS)
CCT

Basic customizing for warehouse number 0001 in EWM (Add-on)

Hi,
does anyone know how to get the basic customizing for warehouse number 0001 into the EWM?
Our EWM is installed as add-on, so the client copy from client 000 to my client will not work (I would override also the ERP customizing this way). I think it would work with the BC sets, but I couldn't find a list which of them have to be activated for the basic customizing ...
Regards,
Monika.

Hi Monica
There is a whole bunch of BCsets which have been arranged in a heirarchical order as per the way they should be implemented in the standard system. They have all the settings to set up WH 0001 with structure, product, HU etc. The main BC set which has this is '/SCWM/BASICS'. This is a heirarchial BC set which has all the required config step by step.
Further more there are specific BC sets for setting up the standard config for inbound and outbound deliveries - '/SCWM/DLV_INBOUND' & '/SCWM/DLV_OUTBOUND'.
You can use these to get the basic config in place.
Hope this helps.
Thanks and regards
Deepak Joshi

Problem with my program looking for the settings file in the wrong folder

I have been writing a simple FTP file uploader, what I want to do is be able to select the files I want to upload in windows explorer and then right click and click the menu item and it launches the program and passes the files paths that I have selected to it.
So I use this in the windows registry "C:\Program Files\Java\jre1.6.0_03\bin\java.exe -jar D:\BenFTP\BenFTP.jar %1"
It launches fine and has no problem finding the files I want to upload. The problem is that it tries to look for the settings file in the same folder that the file I am try to upload is in. Which it's not suppose to do since the settings file is in the same folder that the .jar is in.
Edited by: ColNewman on Feb 5, 2008 6:55 PM

So, you're looking for your settings file in your current working directory. There's no way to set the CWD in your registry entry (is there?) so that isn't a practical thing to do. Presumably you're using a File object or a FileReader or something? Can't do that.
One alternative is to look for the settings file in the classpath. You can get a URL to a file in the classpath like this:URL settings = this.getClass().getResource("/settings.xml");Or you can get an InputStream to read the file by using the getResourceAsStream method. You would have to make sure that your executable jar file contained a Class-Path entry that specified the right directory, because the directory the jar is contained in isn't automatically in an executable jar's classpath.
Another alternative is to ask the user where the settings file is supposed to be, and put an entry in the Preferences (java.util.prefs) to remember that location.

I have been a loyal customer for years and have a hot spot because internet options are very limited in our rural area. I have stayed with 10G since the beginning. Most months I don't use the 10G. Verizon has no problem with me paying for Data I don't

I have been a loyal customer for years and have a hot spot because internet options are very limited in our rural area. I have stayed with 10G since the beginning. Most months I don't use the 10G. Verizon has no problem with me paying for Data I don't use. This month my daughter comes home from College and she accidentally uses 24G.....14 over get blind sided with $140.00 in overages. I called Verizon today......stopped in to the store today......My neighbor told me they waved charges for her one time. Lots of charges.....But I'm am getting no help. Not even an offer of a payment plan to help me out. I went back just 6 months and I have over paid for 19G.....Seems like they would like to help out their loyal customers!!!! Does anybody have any suggestions on how to deal with them? We are not wealthy....or I would just pay this and walk away......

There is a big misconception in what customers believe a cell carrier is obligated to do.
You pay a set price to use up to that amount of xx data. It makes no difference if you use it to the paid limit or way under. Its like peace of mind when you don't have to worry about a data counter.
Your daughter used the data, your plan is quite clear of what overage charges are. Why should or would Verizon wireless just forgive the charges because you are a customer? Your daughter used the data, get the money from her. That is the responsible thing to do.
There is no "I have been a loyal customer so please remove the $120, or $250, or $2,000.00 since I did not mean to use it"
Your electric company, or gas company or any other company does not remove valid charges. Why should Verizon wireless?
Just pay the invoice and don't think you are being mistreated because Verizon is a business and not a charity.
Good Luck

Billing block for customer for sales document type OR

Hi
I want to block a customer for a particular sales document type OR
How to do it?
Regards

Hi Nikhil
There is a field called "Check Partner Auth.", but it is necessary to create the order from a contract. This field is in sales document customizing VOV8.
SAP Documentation:
Check partner authorizations
This check determines whether a partner is authorized to release against a contract.
Procedure
Here you can specify whether the check is to be performed against the partners in the contract or the partners in the customer hierarchy. If you do not want the check to be performed, leave the field blank.
When you create a release order for a contract, the system determines whether a partner is authorized to release against the contract. The check is performed at header level. Depending on the rule you enter in this field, the system checks against one of the following:
Partners in the contract
If the partner has the partner function AG (sold-to party) or AA (sold-to party authorized to release) in the contract, the system accepts the partner as the sold-to party for the release order.
Partners in the hierarchy
If the sold-to party of the contract is at a higher level in the customer hierarchy to the partner who wants to release against the contract, the system accepts the partner as the sold-to party for the release order.
Note
If you create a contract with reference to another contract, the system does not run a check and it copies all the partners created in the target contract. If you do not want it to do this, use copying control in Customizing to change it.
Regards.
Mikel

Customizing for LCA Settings /SAPAPO/OM_CUSTOMIZE

Similar Messages

Maybe you are looking for