Customizing Graphical Planning Table Views

Where do I go to alter the look of the graphical planning tables that I find in transactions like CM21, 27, 31 and 32? There are no labels, everything is gray and difficult to read! Where can I go in and change the way these graphical planning tables look? Mainly the colors of the dispatched orders into the work centers (the single gray bars).

Dear,
Please refer this link,
[Lay-out Profile Set|New Lay-out Profile for CM25]
Regards,
R.Brahmankar

Similar Messages

Adding custom fields to table view assignment block

Hi All,
I want to add two news fields to 'Service Contract Item Level' in 'Object List' assignment block. How can i add these two custom fields to table view assignment block using AET. I have tried to add new fields using AET but there is no business object supports to my requirement.
Thanks & Regards
Nitish

Hi Nitish,
As naveen sadid use Cutomer_i object . I guess it will be more appropriate.
And following link will be helpful for AET creation.
CRM 7.0 How to --4 Adding Custom Fields With The New Application Enhancement Tool (AET)
Regards
Loks

Graphical Planning Table can show quantity?

Dear all,
I am using Graphical Planning Table (MF50), the graphic shows the planned order number for each Material.
How can the graphic show the quantity for each Materials?
Pls help me to configure it.
Thank you very much!
Cao Huy

Hi Huy Cao,
why not to show the order QTY in the table section of the chart for each material? you could create a layout key containing the field GSMNG-PLAF and assign it to the layout of the charts - dispatched and pool via OPDJ.
Cheers,
Mao

MSS custom query restrictions (table/view/join)

Dear all,
We are currently trying to integrate a sap query which also gathers data from event management. This query is based on an infoset and a table view and not on a logical database.
When executing the query within the portal (generictableview iview) we get the error message "No data records found". While debugging the function module HR_INFO_GET_USING_QUERY which is called here we found out that the error message is generated because no logical database is retrieved.
Therefore my question is: are mss queries in portal restricted to queries which are based on logical databases only or can we create and use queries in portal which are based on table/views/joins?
Any help on this issue is greatly appreciated!
Thanks already very much in advance,
Helga

Hello MIG,
I am still searching and I have not found a solution yet.
Interestingly enough the query can be executed without any problems in R/3 but not from the portal iView. Therefore I am wondering if it is only a restriction on the MSS side.
@forum users: did anyone of you face this problem and has a solution to it?
Thanks very much for any input on this!
Kind regards,
Helga

Configuring the graphical planning table (GPT)

Hi folks,
Can anyone help me out here, feeling a bit dumb
I am trying to configure the field layout for the orders pool on the GPT. I have identified my overall profile (SAPSFCG001), the planning table profile (SAPSFCL001), the layout ID (SAPSFCLA05) and the layout key (SAPSFCAS03)
When I edit the layout key SAPSFCAS03, I want to add the operation short text, I have found it in the list and added it to the layout key... all good so far.
When I run CM25 with my overall profile... for some reason the headers are correct but the actual column data is not ... i.e. it hasn't pulled through the operation short text for any orders and to make matters worse, the column headers and the actual data are now out of sync... so under the operation short text I have the work centre name ... what the ?!?!?!
clearly I am missing something here.
Any help would be greatly appreciated.... thanks

Dear ,
Please check in CY38-Lay out key -SAPSFCAS03-Hit change pencil -Please do the following :
1.Remove the high lighte mark from existing Operation Short text column and select the Standatd one ( Operation Short Text line -It will be in down botton -Operation row started with AFVGD -Field lenght 97 ) .
Accordingly mark those field which you want to bring into CM25 taking refernce of Standrad one .
2.Then you hit the Sequence and heading text .
3.Now select the high ligthed row and hit the Select icon ( ink-nip mark ) to move as per your sequence .
4.Finally re-chek with preview and SAVE.
Hope this clarifies
Regards
JH

OBIEE 11G help with report narrative and table view

Hi,
I have a report designed like the below, I have used "narrative view" for customer detail and "table view" for order detail. In the narrative view I can say row = 1 and it picks up the first record of the customer detail, but order detail shows all rows. How can I control it so the order detail shows only the detail record of the customer associated. Also how do I go to the second record and so forth. Please help. If this is not possible and if there are any alternates, please let me know. Thanks for your time and help.
Customer Number:
Customer Name:
Customer Address:
Order Detail:
Line number | Order No | Order description | Order Status

ssk1974 wrote:
Hi,
I have a report designed like the below, I have used "narrative view" for customer detail and "table view" for order detail. In the narrative view I can say row = 1 and it picks up the first record of the customer detail, but order detail shows all rows. How can I control it so the order detail shows only the detail record of the customer associated. Also how do I go to the second record and so forth. Please help. If this is not possible and if there are any alternates, please let me know. Thanks for your time and help.
Customer Number:
Customer Name:
Customer Address:
Order Detail:
Line number | Order No | Order description | Order StatusWhy don't you do this?
1) Build a dashboard prompt for Customer Number. and save to a PV.
2) Build a report with all the columns for customer and order (in Criteria View) with a filter for the PV to capture the dashboard prompt.
3) Build a pivot table with Customer Number and Customer Name in the Rows section. Put the Customer Address in the Measures section and change the Aggregation Rule to Max.
This will serve as the summary table showing only the information of the customer selected.
2) Build Pivot Table:2 with the Order details.
3) In the Compound Layout, put Pivot table one on the top and Pivot Table:2 below it.
When a customer is selected, you will have the customer data with the order details under it for that customer only.

Addition of a custom column in a table view

Hi all,
I want to add a custom column in a table view. Kindly tell me if this is possible.
Regards,
Vivek Pandey

Hi Vivek,
This can definately be done....you will have to declare and iterator and in the GET_COLUMN_DEFINITIONS, declare the column name....
Referr to blogs :
<a href="/people/brian.mckellar/blog/2003/10/31/bsp-programming-htmlb-tableview-iterator Basics</a>
and
<a href="/people/thomas.jung3/blog/2004/09/15/bsp-150-a-developer146s-journal-part-xi--table-view-iterators Iterator.</a>
The second blog shows how to insert a icon, which is an extra column...
Hope this helps.
<b><i>Do reward each useful answer..!</i></b>
Thanks,
Tatvagna.

Custom Table View

Hi,
I want to provide more than three component in the table view.
Two images/Icons (Left Side), Text with Subtitle, Text (Date and Time at right-hand side)and Detail Disclosure button.
How can i create this with the custom table view?

This is an end-user forum. You need
http://devforums.apple.com

Planning Planned order in planning table graphic (PP-PI)

Is it true that cannot plan planned orders, that will be destined to process orders in the table of graphical planning? (CM25).
Because I tested with all the profiles standard and no one leaves me to dispach planned order....
Thanks regards

Hi
Try following things in spro in development & test
goto
Capacity requirement Planning-Operation-scheduling-scheduling paramets for Planned order
This may of help.
regards
Prakash

Ability to display multiple texts within graphic planning board Gantt chart

I have been unable to change the planning board Bar Chart Graphic Profile (OPG0 and OPG9) to be able to display both material text and a user field within the Gantt chart graphic. I have copied the SAPSFCG011 profile and created my own. The profile is displayed below from CMCH.
Overall prof: ZBWSFCG011           SFC: View work center/capacity (3 graf.)
...... Select.profile:                     ZBWSFCS001      SFC: View work center -> cap.(3 graf.)
...... Control profile:                    ZBW___C002      Gen: Planning table
...... Time prof:                           ZBW___Z002      Gen: Medium-term (3 months)
...... Evaluation prof.:                 ZBW___A001      Gen: Standard evaluation profile
...... Strategy prof.:                    ZBW___T001      Finite scheduling forw./all functs.activ
...... Capacity planning table:      ZBWSFCL010      SFC: only main cap. (3 graf.)
.......... Graphics profile                      ZBW___X002      BARC    1 Default profile 2 Capa. planning board
.......... Chart sequence                      ZBWSFCT002      SFC: Main caps. (3 graph.)
.......... Layout ID                                 ZBWSFCLA10      SFC: Work center view     (graphical)
.......... LineRepresSelection                 ZBW___ZR02      SAP standard 2
.......... Scale time axis                         SAP___M031      Stand. weekly per. split rough
.......... Graph.object.select.                ZBW___OA02      Pool group order path
.............. DStat Sq Structur Field na ROp Comparison val NStat Struct
.............. 00000 01 KBED     TYPKZ    NE 1                      00001
.............. 00000 02 AFVG     OBJNR    ST SAP005         00000 SAP002 Standard operation partially confirmed
.............. 00000 03 AFVG     OBJNR    ST SAP006         00000 SAP003 Standard operation completely confirmed
.............. 00000 99                   DEF                                  00000 ZJB000 Standard operation
................... Graphical object type               ZJB000          Standard operation
........................ Form type                           22              Plan. board:Graphic obj. w. ordNo matTxt
........................... Form group                          ZBW001
............................... Form definition                     PLTO22          Planning board graphic order and mat.txt
.................................. Layout definition                   [[$a//$b]]
.................................. Layout definition
.................................. Layout definition
.................................. Layout definition
In addition to the profile change, I have configured the graphical object type ZJB000 (in OPG9) to look as follows:
0     AFKO     Order header                          MATXT     Material description
2     KBED     Capacity requirements     A     SSTAD     Latest start / date     SSTAU     Latest start / time
3     KBED     Capacity requirements     A     SSSBD     Latest scheduled start: Processing (date)     SSSBZ     Latest scheduled start: Processing (time)
4     KBED     Capacity requirements     A     SSSAD     Latest scheduled start: Teardown (date)     SSSAZ     Latest scheduled start: Teardown (time)
5     KBED     Capacity requirements     A     SENDD     Latest finish / date     SENDU     Latest finish / time
6       AFVG    Order operation                       USR08    User field for date
I have found that the 2nd text field (USR08) must be added as the last step (#6). When I had it as #1, the planning board did not display the USR08 value.
Now both are displayed in the Gantt chart graphic. However, it is difficult to see this long string of data as the bars in the Gantt chart may not be long enough to display the data.
Therefore we would like to use the "hover over" text which is displayed in the status line at the bottom of the screen. We have tried using both the Info Text and the Quick Info options within the Bar Chart: Options Profile (OPG0). Only the first text (the material descirption) is dislayed within either the Quick Info or the Info Text.
Is it possible to have multiple object values appear in Quick Info or Info Text? Or is it possible to control which text is displayed in the Quick Info or Info Text?
Any help in this area would be greatly appreciated, as this is a make-or-break issue for the business to use the planning board. Thank you!

I'm also looking for a standard customizing alternative to do the same thing.
Still, if you're interested, I've already done it successfully with user exit PLAT0001.
Hope this helps.
Best regards.

Edit Problem after changing and transporting a table view

Hallo Experts,
I hope you can help me.
I changed a Z-table in the Data Dictionary. For this table there exists an Tableview.
After I added three new fields I generate a new tableview:
Utilities -> table maintenance generator
Change -> create maintenance screen -> ok
after this I optimized the layout of the screen.
On our Enviromentsystem my Tableview works perfect.
I can make changes in the table.
Then I transported the new tableview to our testsystem.
There I started the sm30 "Maintain table view" and tried to change table entries.
After a click on "Maintain" the following Message appears:
TK 730 Changes to Repository or cross-client Customizing are not permitted.
The strangest thing is, that before my transport, it worked, I could change table entries.
There were no changes on the userrights.
And I can change a similar table on the testsystem.
I compared the properties of both tables. But I could not find a difference.
Have anybody an idea where the error can be?

Hi
Caution: The table is cross-client
Message no. TB113
Diagnosis
You are in the process of maintaining a cross-client table. You are using the standard table maintenance screen here, which is frequently used to maintain client-specific Customizing entries. This message serves to warn you that each change you make will have an effect on all other clients in the system.
System response
You have the authorization required for cross-client maintenance.
Procedure
Think carefully about the effect of your changes. Due to logical dependencies between client-specific Customizing and applications data on the one hand and cross-client Customizing data on the other hand, changing or deleting cross-client data could result in inconsistencies.
Therefore such changes should be carefully planned and coordinated, taking all the clients in the system into consideration.

Use of Planning Table (MF50) in Capacity Levelling with Production Order

Hello Experts
I wish to know that is it possible to perform Capacity Levelling in planning table (tcode MF50) with respect to a Production Order ? It is known that MF50 is used in Repetitive manufacuring to do the capacity levelling with respect to Planned orders. But in our discrete manufacturing scenario we want to use planning table to the capacity levelling with respect toa Production order.
Any clue or help pertaining to this will be highly appreciated.
Thanks in advance
Regards
Jayanta

Dear ,
MF50 is does the cacapcity leveling based on mateail -run schedule order (planned order ) where as in discrete manufacturing , when you run the MRP , MRP system assume Infinite Capacity and schedule the order as per your selection in MD02(2,1,3,3,2) and then you convert those planned order to Production order .Here you checkied the Capacity in Production Order level .
In stanadrd SAP , it is not possible to use MF50 for discrete production order.
In discrete order or process order , do the caapcity leveling , there are seperate planning table available based on Over all Capacity Profile and Schedule type .This can be done in following way :
1.CM31-Production Order Wise -Tabular
2.CM23-PO wise -Graphical
3.MC88: Ruf Cut Planning
Work Centre Wise : CM21 -Graphical , CM22-Tabular Planning Table .
Make sure the below set up before you carry on the Capacity leveling :
.Define time profile in OPD2.
Define the strategy profile in OPDB
Define the Overall profiles in OPD0.
In OPJK maintained check capacity with SAPSFCG013 profile for your production order type
In OPU3 , scheduleing parametre s: Generate Capacity , Scheduling Type , Automatic Log ,Start date in Past as per your req.
In OPJU , chekc the contol tab of the scheduleing as per OPU3
In OPKP- Production scheduling paranmeters assing the overall capacity profile -SAPSFCG013 with finte scheduling tick.
Master Data :
1.Materials Master define the Production scheduler and production scheduling profile
2.Work Center - Define the capcity planner group,activate checkbox Relevant for Finite sceduling,on the capacity header define the shift timings,break timings and unit of measure,no of individual capaity, enter formula for scheduling in capacity view.
3.Routing - enter the values for the standard values. Use control key with scheduling.
Hope this will help you .
Regards
JH

Registering db objects (tables , views , e.t.c)

Hi,
Having connected with a Developer Responsibility , i see a submenu of "Database" which contains the menu entries "Tables" , "Views" , "Sequences"...
When these functions are used....????In order to define/register custom tables,views,sequences with the Application Object Libraries....???
If yes , is it required to ...and under which circumstances...???
Somebody developed some custom form modules/reports using custom db objects which have not been registered...!!!
Note: I use EBS 11.5.10.2
Thanks , a lot
Sim

Registration is not necessary in order for your custom developments to work. However, if You are planning on using certain standard functionality (i.e. flexfields, attachments) on your custom objects, you'll need to register some of the information.

Show colored circles for a field inside table view

HI
I need to show Colored circles based on some conditions for a field (priority) inside a table view. HOw do i implement this solution.
PLease help

Hi,
You have two possibilities:
1. HTMLB charting
See http://www.sapdesignguild.org/resources/ma_guidelines_3/LAYOUT/chart_types.html for more info
2. IGS charting. See this weblog for info
/people/thomas.jung3/blog/2004/08/31/bsp-150-a-developer146s-journal-part-x--igs-charting
You will be certainly interested in this web log
/people/thomas.jung3/blog/2005/09/08/igs-charting-altering-the-customizing-xml-at-runtime
I don't know if you can combine stuff in a tableview.
See also chart graphics
http://help.sap.com/saphelp_nw04/helpdata/en/9b/d9883672d57c73e10000009b38f889/frameset.htm
Alternatively, you can try out the canvas tag in new browsers like Firefox. See /people/eddy.declercq/blog/2005/12/09/blank-canvas
for this
Eddy

Hide data in a table view

Hi,
I need to hide data in a table..Only column headers required to display.. I tried by (display column headers only) in view..It is showing only column header in the view ..But when iam displaying the table in dashboard it displays data also..another approach i took is to hide data from column properties ...Custom css display:none.. it is working fine..But the thing is it will not display data in other views also.I need to hide data only in table view..any helps will be appreciated.. Thank you

Hi Aswin,
Try this....
Take columns twice and first set which is use in table view (use display:none)
and second set use in pivot table and exclude first set columns........
Cheers,
Aravind

Customizing Graphical Planning Table Views

Similar Messages

Maybe you are looking for