Customizing Import of Single Track of a CD

I want to import one track of a CD, but I want to cut off the last few seconds of it. I seem to remember that there is a way to customize the import and cut time off the beginning and end of the track, but can't remember how to do it. There are so many of you out there more knowledgeable than I. Hopefully you can help!!
Thanks,
Linda

Select the track and Get Info. Select the Options tab and adjust the Stop Time.
Now only the part between Start and Stop times will be imported.
Tip (in case you didn't know):
To quickly select only 1 file for import, command-click on one of the checkboxes. This will un-select all tracks. Then click on the checkbox of the file you want to import.
Hope this helps.
M

Similar Messages

I've been importing all my old CDs into itunes but one of them which was unknown imported as single tracks. How can I combine these into one album

I've been importing all my old CDs into itunes but one of them which came up as unknown has imported as single tracks named track 1, track 2 etc. It wasn't an obscure CD (Paul Carrack - the journey so far) but not one that's available in the itunes store. I've manually changed the track names but they all appear as single tracks in the "Albums" section. Is there a way to put them all into an album to show up as an album with the other albums. Other "unknown" CDs I imported have imported with the correct track names but just don't have the album artwork so I don't understand why this one is behaving totally different?

If you select the tracks all together in iTunes/ Songs then go to File/Get info you will be asked "Are you sure you want to edit information for multiple items?" Go ahead and you can make them into an album, putting in the artist name, etc.

Importing a single track results in "Out of Memory!"

I'm trying to import an audio track from another session into my current song, and Logic gives me "Out of Memory! Couldn't insert or delete data".
I have 24 gigs on this system, and 12 currently free. I'm running Logic in 64-bit.
What the heck is going on???

Gowtam,
Are you sure that the HashMap object is available for GC at the end of your controller code?
If your JVM Heap is relatively small compared to the size of your HashMap, then you can hit this issue. Analyze, if you really require such a huge collection on objects to work on, if there is no other alternative, then go ahead and do a memory turning to find out the optimum memory requirement / user and tune your JVM accordingly.

How to import CD as single track in iTunes 11.01?

The abilty to import CDs as a single track in iTunes was great for Dj mix CDs and the like. But there no longer seems to be the option in iTunes 11.01? Or am I overlooking something? Any advice would be appreciated.

No, you don't need to purchase iTunes Match to put CDs on your iPhone. You always have the option of syncing with iTunes using the cable that came with your iPhone.
See this page for more information on importing CDs:
http://support.apple.com/kb/VI106
There is a video tutorial and a number of links to related articles.
Best of luck.

Enhance Tuning to a Key for a Single Track

I am looking to enhance the tuning for a single track but when I go to enhance one track it enhances the tuning for all the tracks. Does anyone know of a way to just enhance the tuning for a single track? Or maybe a way to just export one track out of several?
Thanks

Well I'm just calling it what Garageband is calling it. At the top it says "Garageband, File, Edit, and then Track. Where you can add, delete, and duplicate a track. When you select "Create New Track" you then can choose from Software Instrument, Real Instrument, or Electric Guitar. I think you are thinking of a Track as a Project. When you first start Garageband the top one says _*New Project*_ and the bottom one says _*Recent Projects*_.
And I know you can move it to a New Project. I was muting all the other Tracks in a project except for the one that I wanted in a certain key and then I exported it to iTunes and then stuck it right back in as a song. So I know how to do it that way but I was wondering if there was an easier way where I didn't need to export and import tracks all the time.

Custom Import settings (MP3) not working?

I downloaded itunes today having read the help guides that I could d/l files in MP3 format. I changed the custom import settings as per the help guide and purchased music - only to find the downloads are still in m4p format & as such are no good for my mp3 player.
Right clicking & converting doesn't work as they are protected.
I am hoping this is just an error on the custom set up on my part, but reading this forum I did read about protected and Plus purchases, which I did not see in the help guide before I bought the music.
So, my question is: can the protected files be downloaded with the customized MP3 encoder settings or am I completely limited to Plus purchases?
Thanks!

The import setting have no effect on store downloads, all iTunes store downloads are AAC (MP4). The import settings are used to convert the songs imported from CD or to convert unprotected songs in iTunes, not for choosing a format to download song from the store.
You can't convert standard iTunes copy protected songs, only the iTunes Plus purchases can be directly converted to another format. Where possible if you need to convert you should go for iTunes Plus tracks. The only thing you can do with standard songs apart from playing them in iTunes or on an iPod/iPhone is burn them to Audio CD. You can use that CD just like any regular one. If you need songs that will play on a non Apple player you'd be better looking around for other stores that provide unprotected MP3 downloads.

Insert multiple files onto a single track, not one file per track

Hello,
In both Audition CS5.5 and CS6, when the user inserts multiple files into a multitrack session, they are placed on multiple tracks. (As the help file says, "The files are inserted on separate tracks at the current time position"). Please change this to allow multiple files to be inserted onto a single track.
I can understand the usefulness of the current behaviour in some scenarios, but there are other workflows in which the placement of multiple files on multiple tracks is a serious hindrance.
E.g. In this thread, a user mentions needing to insert 10,000 individual files for dialogue editing and mixing.
I also posted in that thread because my own workflow involves editing hundreds of individual files, which are single notes recorded for the production of virtual instruments.
The reason why a "one-track multitrack" workflow is useful to me is that it allows great flexibility in processing multiple files individually or at once, comparing them, adding markers, fades, etc.
It would also be useful when bringing in any audio that has been recorded in consecutive chunks - field recordings, concerts, Foley sessions, etc.
In the thread, another user suggested inserting all the files onto a single track in Premiere Pro, then bringing that project into Audition as a multitrack session. Unfortunately this creates another problem for me, because it renames all the audio with the suffix "extracted". My workflow requires me to keep the original file names, because these are used downstream when mapping the recorded notes in the virtual instrument.
Thanks for reading and please consider this for a future update.

Just curious. Has there been an answer yet as to how to insert existing audio clips from a file to a waveform view in CS6. I create voiceovers or edit large interview files that require audio tones and sfx for my clients in production studios. The tones are inserted between takes as a courtesy tone to denote separation. In the older versions of Audition, the function was as simple as mix/pasting an audio file, selecting insert or overlap, set the import level percentage and paste. And each time this function was exercised, Audition would use the same settings you last used to reduce repetition of settings. Logical. That's all gone in CS6 ... so, to lay down a voiceover file for Comcast or any client, in waveform view (vs. Multitrack which is not necessary for single mono file editing) I have to go through unnecessary steps simple to select insert/mix paste>file>paste into existing wave form.
Also, if I need to simply overlap a gasp over the last syllable of a phrase in a simple wave form, I don't appear to be able to do this. I called Adobe for support on these function, but, they had not answers and simple said I couldn't change the workspace, and they had no other answers. Any help would be greatly appreciated if you have insight.

Speeding up SINGLE tracks.

Hey,
I'm fairly new to garage band and i have been trying to mix some songs from iTunes. My question is IS THERE A WAY TO SPEED UP OR SLOW DOWN SINGLE TRACKS? Because the two tracks i am trying to mix are out of sync with each oter so IS THERE A WAY TO CHANGE THE TEMPO OF ONE TRACK WITHOUT AFFECTING THE OTHER?
Thanks!

GB doesnt do this. heres a solution:
download free Audacity softo
import track into Audacity
Use 'tempo change' function
import back into GB
however, for beat matching, this may prove more frustrating than its worth, as will probably require lots of experiment.
If you are serious about mixing, beat matching in real time, Ableton live might be a better solution, but a lil pricey.

Importing the wrong track information...

hi,
i have 2 cds that im trying to import. my issue is when i 1st imported them, i choose the wrong version of the single or album.
i have deleted the tracks that were imported, as they were diffrent to the actual track listings for the cd's i have.
i now want to import the correct track listing. but when i try to import again, it imports the previous selction i had made. how can i change this to the correct track listing??
Thanks

You will have to do it manually. That information gets downloaded manually and as far as I know, you cannot reset the data to re-ask the CDDB once you select an album.

Song names imported as "artist - track name" instead of "track name"

When I add a folder to my library (a folder which contains MP3 files which all contain complete ID3 tags), about 50% of the song names get imported as "artist - track name" instead of just "track name". If I click on any track which was imported like this, and right-click and select "get info", the track name shows up correctly in the dialog box, and it suddenly fixes the display on the listing (without me doing anything).
I could fix each song by clicking "get info", but I would have to do this for all my songs, which would take far too long. Is there any way to get iTunes to import these track names correctly? Or is there a way to refresh the listing, and have iTunes re-read the ID3 tags on the MP3 files?
Windows XP Pro

To get the track names etc., when importing a CD, you have to be connected to the Internet.
This article explains why.
To get the info later, select all tracks (with the generic track names) of an album and choose 'Get CD Track Names' from the Advanced menu in the menubar.
Very often the correct information will show up.
Hope this helps.
M
17' iMac fp 800 MHz 768 MB RAM Mac OS X (10.3.9) Several ext. HD (backup and data)

How do I import multiple audio tracks?

Hi there...
I have a number of video files that have multiple audio tracks in them. The problem is I can not work out how to get prem to see multiple audio tracks. The files import fine and I have also tried various other formates with multi-track audio.. but only audio "stream 1" is visible in prem.
What I was hoping is that the video would come in with a 2 audio tracks instead of 1 each in its own "lane".. so I can then use the mixer and the audio files are linked to the video file and in perfect sync.. (just like when you import with 1 track)
NOTE: I am not talking about channels.. but complete 2 completely different audio tracks.. and I know that I could extract these audio streams into wavs and then re-sync them but this seams overkill and a duplication of effort... surly there is a way to have prem support more than 1 audio track on a video file?
--Me

Well, if PP doesn't bring them in, then best guess is they just don't exist.
There's really no trick or user adjustment for this that I'm aware of. You import the file, PP sees what's in it. I've never observed or read about any other behavior than that.

How can I export a single track in Soundbooth CS5?

Greetings,
I have built up a single track in Soundbooth composed of several repeated clips. I wish to export this single track.
How can I do this in CS5 Soundbooth?
Thanks,
folsombob

Sorry nobody has answered this. I haven't been in this forum in a couple of weeks.
If you have all the tracks right where you want them, are you able to save the file as an mp3?
Are you looking to export it for web use?
For video tracking?
I'm not sure why you'd want to export it as opposed to saving in one of the many available formats.

Importing a single dumpfile in multiple databases at a time

Hi Folks,
I got request from my client side like follows,
They have a dump file of one schema called belin(schema name).
With that dump file i need to import to three databases called
1. gelixu1
2. gelixu2
3. gelixu3
in parallel manner (it means at a time.).. All my three databases are running in same server.
Mostly for single database it will take 1.5 Hours. but this time client had given only 2 hours for all the three databases.
Kindly let me know the possible ways.
way 1:
i thought of importing in three data bases in three session with a single dump file. What my doubt is, when importing in single database will it make any lock on a dump file, So other two databases cant use in parallel manner.
or
any other commands like
impdp username/passwd@ gelixu1,gelixu2,gelixu3
are there?

Hi,
I have One option. As you stated your import will take 1.5 hr and client provided the 2 hrs time. Perhaps Our DB Server in One and with 3 different instance.
If you are sure enough that it will take 1.5 hour. then I say try to import into One database and try to opt for parallel and direct load. Once import is done in one database then parallel you carry out the TTS (transportable tablespace) which might more flexible enough - perhaps you must check whether the required tablespaces and characters are fine with existing databases.
Note: just an alernative - since it's a plugin copy of fiile on same server
- Pavan Kumar N

Best Way to Export Single Tracks in Audition

Hello,
What is the best way to export one single track (stereo or 5.1) from a multiple track mix in the Multitrack Editor if I want to make it mono? Is it by just muting the tracks I don´t want in the final mixdown and then selecting a mono Master in the Mixdown Options box?
What about exporting only a few of the tracks from a multiple track mix to one mono file? Same process?
Thanks!

"Export all Tracks as Audio Files" found under File>Export.
This will render audio files of your software instruments that start at bar 1, beat 1, and can be dragged right into Pro Tools. The export happens "pre-fader", so it is bounced at unity gain, and excludes any automation.
If there is automation that needs to be included (like a filter sweep or something like that), you'll need to solo the track, and bounce it, because a bounced file does include automation.
Also, if you're using a multi-channel instrument, you'll need to bounce those tracks separately as well.

ITunes crashes often importing last CD track

Running iTunes 6 on WinXP (Sony Vaio RS402, 1.5Gb RAM, P4 2.8GHz) I often have a problem with iTunes hanging while importing the last track of a CD (both commerical and burned). Tried using 2 different CD drives but the same problem. Any ideas?

Thanks. Here's the printout
Microsoft Windows XP Home Edition Service Pack 2 (Build 2600)
Sony Corporation PCV-RS402(CE)
iTunes 6.0.4.2
CD Driver 2.0.4.3
CD Driver DLL 2.0.3.2
LowerFilters: PxHelp20 (2.0.0.0), Pfc (2.5.0.204), RegKill (2.3.0.1),
UpperFilters: InCDPass (4.2.9.1), GEARAspiWDM (2.0.4.3),
Video Driver: RADEON 9200 SERIES \RADEON 9200 SERIES
IDE\DiskST3400832A_____________________________3.02___, Bus Type ATA, Bus Address [1,0]
IDE\DiskWDCWD1200BB-98DWA0____________________15.05R15, Bus Type ATA, Bus Address [0,0]
USBSTOR\DiskSony___UMH-U_HS-CF____2.49, Bus Type USB
USBSTOR\DiskSony___UMH-U_HS-MS____2.49, Bus Type USB
USBSTOR\DiskSony___UMH-U_HS-SM____2.49, Bus Type USB
IDE\CdRomHL-DT-STDVD-ROM_GDR8162B_______________0015___, Bus Type ATA, Bus Address [1,0]
IDE\CdRomSONYDVD_RW_DW-U14A_____________________2.0c___, Bus Type ATA, Bus Address [0,0]
SCSI\CdRomXD2501UKJA702C________2.0B, Bus Type SCSI, Bus Address [0,0]
If you have multiple drives on the same IDE or SCSI bus, these drives may interfere with each other.
Some computers need an update to the ATA or IDE bus driver, or Intel chipset. If iTunes has problems recognizing CDs or hanging or crashing while importing or burning CDs, check the support site for the manufacturer of your computer or motherboard.
Current user is administrator.
E: SONY DVD RW DW-U14A, Rev 2.0c
Audio CD in drive.
Found 13 songs on CD, playing time 45:15 on Audio CD.
Track 1, start time 00:02:33
Track 2, start time 03:00:23
Track 3, start time 03:53:25
Track 4, start time 05:32:28
Track 5, start time 10:16:55
Track 6, start time 13:02:63
Track 7, start time 14:12:30
Track 8, start time 18:34:68
Track 9, start time 21:12:68
Track 10, start time 26:46:30
Track 11, start time 27:45:65
Track 12, start time 35:48:23
Track 13, start time 39:00:43
Audio CD reading succeeded.
Get drive speed succeeded.
The drive CDR speeds are: 24.
The drive CDRW speeds are: 24.
The drive DVDR speeds are: 24.
The drive DVDRW speeds are: 24.
F: HL-DT-ST DVD-ROM GDR8162B, Rev 0015
Audio CD in drive.
Found 38 songs on CD, playing time 60:43 on Audio CD.
Track 1, start time 00:02:00
Track 2, start time 04:16:50
Track 3, start time 07:10:27
Track 4, start time 10:24:12
Track 5, start time 12:05:37
Track 6, start time 13:17:37
Track 7, start time 16:15:12
Track 8, start time 19:36:12
Track 9, start time 21:43:32
Track 10, start time 22:40:67
Track 11, start time 29:48:62
Track 12, start time 31:26:40
Track 13, start time 32:59:07
Track 14, start time 39:14:25
Track 15, start time 42:00:12
Track 16, start time 44:42:55
Track 17, start time 47:58:20
Track 18, start time 48:15:12
Track 19, start time 48:25:45
Track 20, start time 48:43:65
Track 21, start time 50:24:55
Track 22, start time 50:36:12
Track 23, start time 50:54:30
Track 24, start time 51:10:45
Track 25, start time 51:44:42
Track 26, start time 51:51:32
Track 27, start time 52:00:72
Track 28, start time 52:11:00
Track 29, start time 52:36:10
Track 30, start time 55:31:50
Track 31, start time 55:43:35
Track 32, start time 55:51:32
Track 33, start time 56:06:07
Track 34, start time 56:21:72
Track 35, start time 56:36:50
Track 36, start time 56:45:07
Track 37, start time 57:10:12
Track 38, start time 60:35:20
Audio CD reading succeeded.
Get drive speed succeeded.
V: XD2501U KJA702C, Rev 2.0B
Drive is empty.

Customizing Import of Single Track of a CD

Similar Messages

Maybe you are looking for