Customizing infotype 0024?

Hey everyone,
I'm a beginner on SAP HR module.
I have a question about customizing infotype 0024.
How do I add new qualifications? AKA : Creating new skills (such as language)
I'm not too good at creating them on tables. Is there any other way to create them? If not, can someone please explain it to me step by step?
Thanks a lot.

Hi,
You can add new qualifications going through the spro.
Enter Tcode SPRO
Personnel Management>Personnel administration>employee qualifications-->create qualifications
Almost everytime you will find many of your configuration needs in the SPRO.
Regards...

Similar Messages

Qualifications and Infotype 0024

I would like to understand the relationship between Qualifications Profiles and Infotype 0024
When we create Qualifications Profiles on the PD side, on the Person Object, for example, does it automatically get transferred to IT0024 or do we have to run a Program or a Report to populate IT0024.
Similarly, if we create IT0024 with Qualification data, do we have to also maintain Profile on the PD side with similar data or does it trnasfer data automatically or do we have to run a Report or a Program.
<b>Pl note that PA/PD/OM integration is all ACTIVE</b>

Hi My Friend
Please refer to the SAP note 384001 - FAQ: Qualifications and Requirements
1. How do you activate integration between Personnel Administration and
     Personnel Planning for qualifications?
Customizing: table T77S0, parameter PLOGI QUALI
                                                                   Page 2
2. How does active integration affect infotype 0024 in a personnel
     action?
When integration is active, infotypes 0024 or 0025 must always come at
the end of a personnel action.
3. What impact does active integration have for the Ad Hoc Query?
When integration is active, the data is no longer physically stored in
infotype 0024 (table PA0024), but in infotype 1001 (table HRP1001
subtype A032).This explains too, why you can no longer directly access
the infotype fields of IT0024 in the query. Any attempt to access these
always fails.
4. Why is the qualifications catalog not alphabetically sorted in F4
     possible entries help?
Generally speaking, sorting in the qualifications catalog (transaction
OOQA or PPQD) is not the same as sorting in the possible entries feature
(F4 help). The reason for this is the different method used for the
sorting. While sorting in transactions OOQA and PPQD is done
alphabetically, the possible entries feature only sorts the first level
(qualification groups) alphabetically. All other levels are sorted by
object ID.
From release 4.6C you can sort qualifications manually in the
qualifications catalog (transaction OOQA).From a technical point of
view, this information is stored in the database field P1001-PRIOX.This
sorting also applies to the possible entries help.Thus, the
qualifications catalog has the same sorting throughout.
If you have a pre-4.6C release, you can only achieve the same sorting if
you adjust the field P1001-PRIOX accordingly using transaction PP01 or
PP02. Before you use transactions PP01 or PP02, you should check whether
maintenance is allowed in table T777I.
5. How are notes for qualifications stored in the qualifications
     profile?
The notes are stored period-independent with the key 'person has
qualification' (for example, P 0003212 A032 Q 50001231).The advantage of
this is that you only have one note attached to a qualification, whose
history you can monitor.
Example (Qualifications profile):
Qualification Proficiency Period Note
   English 1 01.01.1980 - 30.06.1998 X
   English 2 01.07.1998 - 31.12.9999 X
The same note is displayed regardless of whether you look at the note
for the first or second entry.
6. Can you create customer-specific Infosets (Ad Hoc Query) for the
     unrestricted search for persons and applicants?
Yes, you can create customer-specific InfoSets. These customer-specific
InfoSets must be defined in the 'global work area' in transaction SQ02.
Customer-specific InfoSets for Personnel Development must not be
defined in the standard work area, they must always be in the global
area.
7. How does the inheritance logic work for the specification
     descriptions for qualifications?
If you want to store standard values for the specification descriptions,
you can do this in the IMG (Personnel Development) under 'Edit scales'.
So that these standard values are inherited to the qualifications, in
the qualification catalog, the 'Default' flag must be set both in the
qualification group and in the qualification in the tab.
If the flag in the qualification group is not set, the stardard values
are not inherited t othe qualification below.
If the flag is not set in the individual qualification, the standard
values are only not inherited to this qualification. Then you can enter
a specification description for this qualification.
Hope it can give you answer
Regards,
Jun

New Tab creation in Infotype 0024

Hi Freinds,
I am searching for a solution for craeting a New Tab in Infotype 0024 having the same functional specs and interation like Standard Tab 'Qualification'.
Please revert back with solution if any.
Thanking you in advance
Regards
R. Jyoti

Hi
Here i have some solution,give your BADI name so i can proceed futher..
SPROLOGISTICSBussiness Partner--- Customers --- Control ---Adoption of
Customer own master Data fields--- click on Prepare Modification free Enhanvement of cusomer master record..
hERE YOU CREATE your new entries.
if you give that badi. i will check and give the solution to my knowledge.
thanks

Error while creating a query for my custom infotype

Hi,
I have created a custom infotype with fields currency amount and currency field .
While I am creating a query for it its giving an error
Message no. AQ_AD_HOC221 Error when generating the report(see long text )
I tried to execute the standard program RPUMS40CCI but still I am facing same error .
I have also maintained table T777i for my infotype but still problem exists.
Please help.
P

Hi
Check in PM01

Error while editing an automaticlly populated record of a custom infotype

hi,
a query in HR ABAP.
i have created a custom Infotype to store the CTC details of an employee. this custom IT needs to get the records auto populated, when they are created in Infotype 0008.
i have used the exit. EXIT_SAPFP50M_002 inside which an include program is written :ZXPADU02
using this, the records made to get create automatically in the custom IT.
but when we try to modify or delete those records thru the tcode PA30,
it does not allow to do so and throws a standard error message. as below.
Specified subtype is invalid
Message no. PG088
please help me out to fix this issue.

the exact point of the std error is,
i do the folowing steps.
1)_ for auto creating a record in custom IT Pa**** , i goto transaction, PA30, create record in IT 0008 with a basic Pay., click on save.
on saving , the EXIT_SAPFP50M_002 is called where i ve written a Z inlcude Program, which inserts the record in custom IT PA****. this is successful.
2) when i try to change or delete the same record which i ve created as above, through the Tcode PA30 for custom IT, PA
****, i get the error.
hope the problem is clearly mentioned

About to use HR_INFOTYPE_OPERATION to create customer infotype issue:

hi
i want to create infotype use function(HR_INFOTYPE_OPERATION).
this infotype is customer infotype.
the first scenario is:
i'm be sure no data about one employee in this infotype(9004).
to call with data upload function and put data into internal table IT_PA9004.
and the table data as follow:
one line: it_pa9004-pernr = '11022887' ,it_pa9004-subty = 'FQ03',
          it_pa9004-begda = '20080201' , it_pa9004-endda = '20080930'
          it_pa9004-zzvalue = 50 (customer field).
two line:it_pa9004-pernr = '11022887' ,it_pa9004-subty = 'FQ03',
          it_pa9004-begda = '20080201' , it_pa9004-endda = '20080930'
          it_pa9004-zzvalue = 60 (customer field).
three line:it_pa9004-pernr = '11022887' ,it_pa9004-subty = 'FQ03',
          it_pa9004-begda = '20080101' , it_pa9004-endda = '20081031'
          it_pa9004-zzvalue = 70 (customer field).
four line:it_pa9004-pernr = '11022887' ,it_pa9004-subty = 'FQ03',
          it_pa9004-begda = '20080101' , it_pa9004-endda = '20081031'
          it_pa9004-zzvalue = 80 (customer field).
i run the programme and get information is:
11022887 insert ok.
11022887 insert ok.
11022887 insert ok.
11022887 insert ok.
but i use the transation PA30 to view all data:
in database just exist one row:
four line:it_pa9004-pernr = '11022887' ,it_pa9004-subty = 'FQ03',
          it_pa9004-begda = '20080101' , it_pa9004-endda = '20081031'
          it_pa9004-zzvalue = 80 (customer field).
the second scenario is:
in database the infotype have exist one row:
           pa9004-pernr = '11022887' ,it_pa9004-subty = 'FQ02',
           pa9004-begda = '20080318' , pa9004-endda = '20080318'
           pa9004-zzvalue = X (customer field).
and i create another row:
line:it_pa9004-pernr = '11022887' ,it_pa9004-subty = 'FQ02',
          it_pa9004-begda = '20080318' , it_pa9004-endda = '99991231'
          it_pa9004-zzvalue = 80 (customer field)
i run the programme and get information is:
11022887 insert ok.
the three scenario is:
    set HR_INFOTYPE_OPERATION of import parameter operation = 'MOD'
    in any scenario will get error :not exist subtype .
what heppend about HR_INFOTYPE_OPERATION working,i had to use this function to
   create other infotype of SAP owner.
   and will create successfully.
so i thank it may be config Constraints about customer infotype.
is time Constraints effect?
so i want to how to check it?
and if i want to create one infotype for customer using PM01 what some thing
must be taken into account.
think you advance.
partial source code as follow:
FORM ACTION_INSERT .
DATA: P_FLAG TYPE C.
DATA: WA_LOG LIKE LINE OF DATA_LOG.
DATA: PP_ACTION TYPE PSPAR-ACTIO.
LOOP AT IT_PA9004.
    CLEAR P_FLAG.
    CALL FUNCTION 'HR_PSBUFFER_INITIALIZE'.
    PERFORM lock_employee USING IT_PA9004-pernr CHANGING P_FLAG.
    PP_ACTION = IT_PA9004-ACTION.
    PERFORM HR_INFOTYPE_OPERATION USING IT_PA9004 PP_ACTION CHANGING P_FLAG.
    IF P_FLAG IS INITIAL.
      if test_run = space.
        COMMIT WORK.
      else.
        ROLLBACK WORK.
      endif.
      write:/ it_pa9004-pernr,'insert ok'.
    ELSE.
      ROLLBACK WORK.
      write:/ it_pa9004-pernr,'error'.
    ENDIF.
    PERFORM unlock_employee USING IT_PA9004-pernr .
ENDLOOP.
ENDFORM.                    " ACTION_INSERT
FORM LOCK_EMPLOYEE USING    P_PERNR
                    CHANGING PP_FLAG.
CHECK PP_FLAG IS INITIAL.
CLEAR P_RETURN.
CALL FUNCTION 'BAPI_EMPLOYEE_ENQUEUE'
    EXPORTING
      number = P_PERNR
    IMPORTING
      return = P_RETURN
    EXCEPTIONS
      OTHERS = 01.
CALL FUNCTION 'HR_INITIALIZE_BUFFER'
    EXPORTING
      pernr = P_PERNR.
IF P_RETURN IS NOT INITIAL.
    PP_FLAG = '1'.
ENDIF.
ENDFORM.                    " LOCK_EMPLOYEE
FORM HR_INFOTYPE_OPERATION USING    P_PA9004 LIKE IT_PA9004
                                     P_ACTION type PSPAR-ACTIO
                            CHANGING PP_FLAG.
CHECK PP_FLAG IS INITIAL.
DATA: bapipakey type bapipakey,
        P_SUBTY TYPE P9004-SUBTY,
        PP_9004 TYPE TABLE OF P9004 WITH HEADER LINE.
CLEAR P_RETURN.
REFRESH PP_9004.
MOVE-CORRESPONDING P_PA9004 TO PP_9004.
IF P_ACTION = 'INS'.
    PP_9004-AEDTM = SY-DATUM.
    PP_9004-UNAME = SY-UNAME.
ENDIF.
IF P_ACTION = 'MOD'.
    PP_9004-AEDTM = SY-DATUM.
    PP_9004-UNAME = SY-UNAME.
ENDIF.
APPEND PP_9004.
P_SUBTY = P_LGART.
CALL FUNCTION 'HR_INFOTYPE_OPERATION'
    EXPORTING
      infty         = '9004'
     subtype       = 'FQ03'
      subtype       = P_SUBTY
      number        = PP_9004-pernr
      validityend   = PP_9004-ENDDA
      validitybegin = PP_9004-begda
     RECORDNUMBER = pp_9004-seqnr
      record        = PP_9004
       operation     = 'INS'
     operation     = P_ACTION
      nocommit      = 'X'
    IMPORTING
      return        = P_RETURN
      key           = bapipakey
    EXCEPTIONS
      OTHERS        = 0.
IF P_RETURN IS NOT INITIAL.
    PP_FLAG = '9'.
ENDIF.
ENDFORM.                    " HR_INFOTYPE_OPERATION
FORM UNLOCK_EMPLOYEE USING    P_PERNR.
CALL FUNCTION 'BAPI_EMPLOYEE_DEQUEUE'
    EXPORTING
      number = p_pernr
    IMPORTING
      return = P_RETURN
    EXCEPTIONS
      OTHERS = 01.
ENDFORM.                    " UNLOCK_EMPLOYEE

hi
i want to create infotype use function(HR_INFOTYPE_OPERATION).
this infotype is customer infotype.
the first scenario is:
i'm be sure no data about one employee in this infotype(9004).
to call with data upload function and put data into internal table IT_PA9004.
and the table data as follow:
one line: it_pa9004-pernr = '11022887' ,it_pa9004-subty = 'FQ03',
          it_pa9004-begda = '20080201' , it_pa9004-endda = '20080930'
          it_pa9004-zzvalue = 50 (customer field).
two line:it_pa9004-pernr = '11022887' ,it_pa9004-subty = 'FQ03',
          it_pa9004-begda = '20080201' , it_pa9004-endda = '20080930'
          it_pa9004-zzvalue = 60 (customer field).
three line:it_pa9004-pernr = '11022887' ,it_pa9004-subty = 'FQ03',
          it_pa9004-begda = '20080101' , it_pa9004-endda = '20081031'
          it_pa9004-zzvalue = 70 (customer field).
four line:it_pa9004-pernr = '11022887' ,it_pa9004-subty = 'FQ03',
          it_pa9004-begda = '20080101' , it_pa9004-endda = '20081031'
          it_pa9004-zzvalue = 80 (customer field).
i run the programme and get information is:
11022887 insert ok.
11022887 insert ok.
11022887 insert ok.
11022887 insert ok.
but i use the transation PA30 to view all data:
in database just exist one row:
four line:it_pa9004-pernr = '11022887' ,it_pa9004-subty = 'FQ03',
          it_pa9004-begda = '20080101' , it_pa9004-endda = '20081031'
          it_pa9004-zzvalue = 80 (customer field).
the second scenario is:
in database the infotype have exist one row:
           pa9004-pernr = '11022887' ,it_pa9004-subty = 'FQ02',
           pa9004-begda = '20080318' , pa9004-endda = '20080318'
           pa9004-zzvalue = X (customer field).
and i create another row:
line:it_pa9004-pernr = '11022887' ,it_pa9004-subty = 'FQ02',
          it_pa9004-begda = '20080318' , it_pa9004-endda = '99991231'
          it_pa9004-zzvalue = 80 (customer field)
i run the programme and get information is:
11022887 insert ok.
but in database just exist the first data
           pa9004-pernr = '11022887' ,it_pa9004-subty = 'FQ02',
           pa9004-begda = '20080318' , pa9004-endda = '20080318'
           pa9004-zzvalue = X (customer field).
the three scenario is:
    set HR_INFOTYPE_OPERATION of import parameter operation = 'MOD'
    in any scenario will get error :not exist subtype .
what heppend about HR_INFOTYPE_OPERATION working,i had to use this function to
   create other infotype of SAP owner.
   and will create successfully.
so i thank it may be config Constraints about customer infotype.
is time Constraints effect?
so i want to how to check it?
and if i want to create one infotype for customer using PM01 what some thing
must be taken into account.
think you advance.
partial source code as follow:
FORM ACTION_INSERT .
DATA: P_FLAG TYPE C.
DATA: WA_LOG LIKE LINE OF DATA_LOG.
DATA: PP_ACTION TYPE PSPAR-ACTIO.
LOOP AT IT_PA9004.
    CLEAR P_FLAG.
    CALL FUNCTION 'HR_PSBUFFER_INITIALIZE'.
    PERFORM lock_employee USING IT_PA9004-pernr CHANGING P_FLAG.
    PP_ACTION = IT_PA9004-ACTION.
    PERFORM HR_INFOTYPE_OPERATION USING IT_PA9004 PP_ACTION CHANGING P_FLAG.
    IF P_FLAG IS INITIAL.
      if test_run = space.
        COMMIT WORK.
      else.
        ROLLBACK WORK.
      endif.
      write:/ it_pa9004-pernr,'insert ok'.
    ELSE.
      ROLLBACK WORK.
      write:/ it_pa9004-pernr,'error'.
    ENDIF.
    PERFORM unlock_employee USING IT_PA9004-pernr .
ENDLOOP.
ENDFORM.                    " ACTION_INSERT
FORM LOCK_EMPLOYEE USING    P_PERNR
                    CHANGING PP_FLAG.
CHECK PP_FLAG IS INITIAL.
CLEAR P_RETURN.
CALL FUNCTION 'BAPI_EMPLOYEE_ENQUEUE'
    EXPORTING
      number = P_PERNR
    IMPORTING
      return = P_RETURN
    EXCEPTIONS
      OTHERS = 01.
CALL FUNCTION 'HR_INITIALIZE_BUFFER'
    EXPORTING
      pernr = P_PERNR.
IF P_RETURN IS NOT INITIAL.
    PP_FLAG = '1'.
ENDIF.
ENDFORM.                    " LOCK_EMPLOYEE
FORM HR_INFOTYPE_OPERATION USING    P_PA9004 LIKE IT_PA9004
                                     P_ACTION type PSPAR-ACTIO
                            CHANGING PP_FLAG.
CHECK PP_FLAG IS INITIAL.
DATA: bapipakey type bapipakey,
        P_SUBTY TYPE P9004-SUBTY,
        PP_9004 TYPE TABLE OF P9004 WITH HEADER LINE.
CLEAR P_RETURN.
REFRESH PP_9004.
MOVE-CORRESPONDING P_PA9004 TO PP_9004.
IF P_ACTION = 'INS'.
    PP_9004-AEDTM = SY-DATUM.
    PP_9004-UNAME = SY-UNAME.
ENDIF.
IF P_ACTION = 'MOD'.
    PP_9004-AEDTM = SY-DATUM.
    PP_9004-UNAME = SY-UNAME.
ENDIF.
APPEND PP_9004.
P_SUBTY = P_LGART.
CALL FUNCTION 'HR_INFOTYPE_OPERATION'
    EXPORTING
      infty         = '9004'
     subtype       = 'FQ03'
      subtype       = P_SUBTY
      number        = PP_9004-pernr
      validityend   = PP_9004-ENDDA
      validitybegin = PP_9004-begda
     RECORDNUMBER = pp_9004-seqnr
      record        = PP_9004
       operation     = 'INS'
     operation     = P_ACTION
      nocommit      = 'X'
    IMPORTING
      return        = P_RETURN
      key           = bapipakey
    EXCEPTIONS
      OTHERS        = 0.
IF P_RETURN IS NOT INITIAL.
    PP_FLAG = '9'.
ENDIF.
ENDFORM.                    " HR_INFOTYPE_OPERATION
FORM UNLOCK_EMPLOYEE USING    P_PERNR.
CALL FUNCTION 'BAPI_EMPLOYEE_DEQUEUE'
    EXPORTING
      number = p_pernr
    IMPORTING
      return = P_RETURN
    EXCEPTIONS
      OTHERS = 01.
ENDFORM.                    " UNLOCK_EMPLOYEE

How to create the custom infotypes in Campus Management

Hi,
Please help me how to create the custom infotypes in campus management.
Thanks,
Lakshmi.

Hi,
Steps to create a HR Infotype:
1) Go to Transaction PM01.
2) Enter the custom Infotype number which you want to create (Should be a 4 digit number, start with 9).
3) Select the 'Employee Infotype' radio button.
4) Select the 'PS Structure Infotype'.
5) Click on Create... A separate table maintenance window appears...
6) Create a PS structure with all the fields you want on the Infotype
7) Save and Activate the PS structure
8) Go back to the initial screen of PM01.
9) Click on 'All' push button. It takes a few moments.
10) Click on 'Technical Characteristics'. Infotype list screen appears
11) Click on 'Change'(pencil) button
12) Select your Infotype and click on 'Detail' (magnifying glass) button
13) Give 'T591A' as subtype table
14) Give 'T591S' as subtype txt tab
15) Give your subtype field as subtype field
16) Save and come back to PM01 initial screen
17) Click on 'Infotype Characteristics' ... Infotype list screen appears
18) Click on 'Change' (pencil) button
19) Click on 'New Entries'
20) Enter your Infotype number and short text
21) Here we have to set different Infotype Characteristics as per the requirement. (Better open another session with some standard Infotype's infotype characteristics screen and use as the reference to fill yours)
22) Save your entries.
23) Now the Infotype is created and ready to use.
24) If you want to change the layout of the Infotype as per your requirement...
25) In the PM01 initial screen...Select 'Screen' radio button and give 2000 as the screen name, then click on edit.
26) In the next screen.. Select 'Layout Editor' and click 'Change'.
27) Screen default layout appears...here you can design/modify the screen..change the attributes of the fields..etc.
28) Save and activate. (Don't forget to 'Activate at every level)
Subtype Creation :
Transaction PM01 Goto Subtype Characteristics. Click on Append and then subtype. Enter the name and description of subtype on screen.
Then goto technical Characteristics and maintain the details of subtype there. I.e name of subtype i.e. component name defined in PSnnnn. Subtype table is T591A.
Subty.text tab is T591S and time const tab is T591A.
See:
http://help.sap.com/saphelp_46c/helpdata/en/4f/d5268a575e11d189270000e8322f96/content.htm
HR related site:
http://www.sapdevelopment.co.uk/hr/hrhome.htm
Enhancement of Infotype
Check the following
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/PAXX/PYINT_INFOTYP.pdf
Infotype Enhancement overview screen
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/60a7586d-edd9-2910-68a8-8204303835a1
Cheers,
vasavi.
kindly reward if helpful.

Custom Infotype - Using Table control in the screen. IN OM

Hi,
I am having a requriement where in I need to create a custom infotype using table control in the screen. I have to create this in OM and I am using PPCI transaction to create the info type. I am able to create the infotype with fields but not table control. Please let me know if any one of you came across and help me with the process I need to follow.
Thanks in advance.
Venkat.

Hello,
After you create the info type throug PPCi, you can directly go to the Sceen module program created automatically while creating Info type and edit the screen.
activate it after your changes.
Regards,
Srujan.

Data not storing in Custom infotype build with tab strips

Hi All,
I have created one custom infotype 9030,
With screen 2000.
which is having tab strips, I have build the screens refering to p9030-zztest its not storing in database.
where I am doing wrong...please let me know what should be done in this case.
Regards
Satish.v

Hi,
Checkout the below link :
<link to blacklisted site removed by moderator>
Shailaja Ainala.
Edited by: Thomas Zloch on Jan 28, 2012 9:06 PM

How to create custom infotype for training and event management

hai freinds can any one tell me how to create custom infotype for training and event managment with following fields
PS No PA0000-> PERNR
Name - PA0001 -> ENAME
IS PS.No. PA0001-> PS no. of Immediate Superior
IS name PA0001 -> ENAME
thanx in advance
afzal

Hi,
Your question is not clear for me. Since it is a TEM infotype, it could be a PD infotype.
If you wish to create a PD infotype, use transaction PPCI to create the infotype.
But before that you need to create a structure HRInnnn (where nnnn is the infotype number) with all the fields relevant for the infotype.
If you wish to create a PA infotype, use transaction PM01 to create the infotype.
But before that you may be required to create a strcuture PSnnnn (where nnnn is the infotype number) with all the fields relevant for the infotype.
Regards,
Srini

Hiding table fields in custom infotype

HI guyz,
i have created a custom infotype which has 2 subtypes . certain fields should not be displayed when we select the subtypes. i have used the code below. the screen contains a table.
MODULE hide_FIELDS OUTPUT.
IF p9555-subty = '1'.
LOOP AT SCREEN.
IF screen-group2 = 'ABC'.
screen-active = 0.
MODIFY SCREEN.
ENDIF.
ENDLOOP.
ENDIF.
IF p9555-subty = '2'.
LOOP AT SCREEN.
IF screen-group2 = 'XYZ'.
screen-active = 0.
MODIFY SCREEN.
ENDIF.
ENDLOOP.
ENDIF.
ENDMODULE. " hide_FIELDS OUTPUT
the fields which are not in the table are not getting displayed as required but the fields in the table still appear on the screen(they are grayed out). i do not want them to appear on the screen. can anyone help me with this. Thanks in advance.

Hi Madhu Reddy , instead of using screen-invisible = '1' , u can try this .
MODULE sereen_modify OUTPUT.
DATA: COL TYPE CXTAB_COLUMN.
LOOP AT TC-COLS into COL.      " TC is ur Table Control
IF col-screen-group1 EQ '007'.     " Modification group1 is say 007.Also u can add other              checks like pnnnn-subty = 1 here .
   col-invisible = '1'.
   col-screen-output = '0'.
   modify TC-COLS from COL index COL-INDEX.
     ENDIF.
ENDLOOP.
ENDMODULE.                           " Call this module in ur Flow Loic PBO.
*Reward Points If Helpful

Need to create maintenance view for a custom infotype

A custom infotype 90XX is created. The data cannot be modified or created through PA30 in this infotype. Through PA 40 actions only we can create/change the record/data. We have created some 1000 records in it. Now can we create a maintenance view for the infotype so that we can create, delete or change the data in the infotype as and when we want.

Hi,
pls chk dat u have maintained the 'Infotype Charecteristics' and 'Technical Attributes' correctly.
thanks,
teja.

Module pool F4-Help problem for a field in custom Infotype(HR).

Dear Gurus,
I have created a custom Infotype and fields are like
P9015-NAM01.
P9015-NAM02.
P9015-NAM03.
all are fields for name.
I want F4 help for these fields with values same as Family Members-First name given in 21 Infotype .
for all 3 fields same f4 help values.
But when i see in the screen for first field the values are populating as selected but for second field the selected value is not picking..
DATA: BEGIN OF it_val1 OCCURS 7,
    nam01 LIKE p9015-nam01,
    rel01 LIKE p9015-rel01,
   END OF it_val1.
SELECT * FROM t591s INTO TABLE it_t591s WHERE
     sprsl = 'EN' AND
     infty = '0021'.
*SUBTY
*STEXT
SELECT * FROM pa0021 INTO wa_21 WHERE pernr = p9015-pernr .
    READ TABLE it_t591s WITH KEY subty = wa_21-famsa.
    it_val1-rel01 = it_t591s-stext.
   CONCATENATE wa_21-favor wa_21-fanam INTO it_val-nname SEPARATED BY space.
    it_val1-nam01 = wa_21-favor.
    APPEND it_val1.
    CLEAR : it_val1, it_t591s.
ENDSELECT.
CALL FUNCTION 'F4IF_INT_TABLE_VALUE_REQUEST'
    EXPORTING
    DDIC_STRUCTURE         = ' '
      retfield               = 'NAM01'
    PVALKEY                = ' '
     dynpprog               = sy-cprog
     dynpnr                 = sy-dynnr
    dynprofield            = 'P9015-NAM01'
    STEPL                  = 0
    WINDOW_TITLE           =
    VALUE                  = ' '
     value_org              = 'S'
     multiple_choice        = ' '
     display                = 'F'
    CALLBACK_PROGRAM       = ' '
    CALLBACK_FORM          = ' '
    MARK_TAB               =
IMPORTING
    USER_RESET             =
    TABLES
      value_tab              = it_val1[]
     field_tab              = t_fields[]
     return_tab             = t_return[]
     DYNPFLD_MAPPING        = t_DYNPFLD_MAPPING
EXCEPTIONS
    PARAMETER_ERROR        = 1
    NO_VALUES_FOUND        = 2
    OTHERS                 = 3
In the same way i am calling for P9015-NAM02. & P9015-NAM03.
Is there any wrong in calling this FM...kindly help.....

Write the FM inside,
at selection-screen on value-request for <nam1>.
It seems that you are calling the funtion module for only first field. Repeat it for other two fields also-
at selection-screen on value-request for <nam2>
call FM.
at selection-screen on value-request for <nam3>
call FM.
Sumit

Custom infotype creation issue

Hi Experts,
I have a requirement to create a custom infotype based on certain conditions. But there is a problem while saving data in the infotype. The infotype is populated from another infotype automatically through dynamic actions.
But while saving the data for the first time it happens as per the requirements and data gets saved properly.
But when the data is saved for the second time for the same pernr , the previous data is over written even though the new record starts with a different begin data.Also i have created the infotype with time constraint '1'.
can you please let me know if i am missing anything while creating or is this a logic issue .? all the logic has been coded in the flow logic part of the screen.
also if i dont save the data in the infotype it does not pop up any message like 'data not saved' which usually happens with every infotype. Please clarify me on this as well...
Thanks,
Raj Thilak.

Hi,
Check the logic how it is updating the custom infotype . I think it is nothing to do with creation of custom info type
Regards
Krishna

Custom Infotype length limitation

Hi,
I have a requirement to create a custom infotype in ECC 6.0 with a table control which can have a maximum of 50 line items. Something similar to basic pay infotype and PA0008. While going through the SAP documentation I found the below statement .
"A new infotype is limited to a maximum of 1000 positions. This restriction is due of the length of structure PRELP, which is used as a container during infotype processing."
This is available at
http://help.sap.com/saphelp_erp60/helpdata/en/60/d8d8c7576311d189270000e8322f96/frameset.htm
In our implementation, each record of standard table PA0008 could go upto 1200 characters with a maximum of 40 line items in the table control. We never used more than 5 line items and never had any problem.
Since the custom table control can have upto 50 line items, each record of my custom table pa9xxxx could go upto 4000 characters and I'm concerned that if this is going to be an issue. Any suggestions in this regard please ?
Thanks for your time,
Kumar.

Hi Venkata
Please see notes 563145 and 1168062 for help
Please also be aware that custom infotypes and the effects of changing structures are the customers responsibility
Best wishes
Stuart

Customizing infotype 0024?

Similar Messages

Maybe you are looking for