Customizing MSS UWL

Hi Experts,
I want to customize the MSS UWL as per the client requirement. they want to hide the three buttons
(Resubmit, Forward, Assign To Me) * from the UWL.
Could you please give some start on how to start the customization of the SAP delivered IView. And also belive that as a XML IView though not sure of it.
Thanks in advance for your help.
Regards,
Balaji

Hi,
Please check the link below:
http://help.sap.com/saphelp_nw70ehp1/helpdata/en/09/6d6b17b29b4eef83a553acaa52f668/frameset.htm
Cheers-
Pramod

Similar Messages

  • Problem in Approving Requisition Request in MSS UWL

    Hi,
    I'm facing problem in approving requisition request sent through Manager in MSS UWL.
    We have configured standard process HR_MSSRCF_REQUISITION with ISR scenario is SRQ3. Workflow is WS45600028
    Case: When I successfully Check & Send Requisition Request form from MSS Recruitment, it is coming in Manager UWL.
    But, when i open the workitem for approval it is not coming as a PDF form with Approve Button in the bottom (Standard). Instead, it opening as per the below screen.
    Please help to resolve this issue.
    Regards

    You should be giving the process reference number or workitem ID in transaction hrasr_test_process.
    Which release you are on , what is the SP level of component EA-HRGXX?
    Further as per note 972322 - HR Administrator: Migration WD4A - the start process application has been migrated to WDA.
    Check the UWL XML configuration to see if the config is as below for the approval task...
    APPLICATION     ASR_PROCESS_EXECUTE(For EhP4, otherwise application depends on the level of EA-HRGXX )
          DYNPARAM     WI_ID=${item.externalId}
          NAMESPACE     sap
          SYSTEM_ALIAS     <use your system alias>
    A sample XML is available with note - 1371626 - UWL Configuration for HR Administrator BP version 1.51.
    This appears to me to be a XML configuration issue. Collaborate with your portal and UWL config consultant.
    Hope this helps.
    Regards,
    Sahir.

  • Assessment - Planning Page will not show in Custom MSS Role

    I have gone through the Notes/Docs for setting up OBN for Performance Management and have implemented the same.
    Now if I go to the Standard MSS role and try to open up Assessment > Click on 'Create' for Succession Planning, it works fine by showing up the Talent Assessment window where it can be completed.
    Now, we have a custom MSS role copied from the standard one and I have included the same Talent Management workset (with the page, folder inside - just like the standard role).
    But when I try the same scenario as above (Z_Manager_role > Talent Management > Assessment (from Service Map) > Click on Create under Succession Planning), I get the following error.
    There is no iView available for system "SAP_ERP_HumanResources": object "employee". For more information, contact your administrator.
    Why would it work on the standard role and not the copy? Any directions highly appreciated.
    FYI. We are on 7.01 SP8, SAP_MSS  600 SP18
    Thanks,
    BR
    Edited by: BR on Oct 5, 2011 12:38 PM
    Edited by: BR on Oct 5, 2011 12:39 PM

    Thanks Sidharth.
    Sorry for not getting back earlier. I had opened a message with SAP. It looks like the problem has to do with Navigation Targets in my custom MSS role - so that is narrowed down now.
    The following prerequisite applies: You must include the navigation targets (for the portal pages mentioned below) in your role.
    pcd:portal_content/com.sap.pct/line_manager/com.sap.pct.erp.mss.bp_folder/com.sap.pct.erp.mss.14.bp_folder/com.sap.pct.erp.mss.14.pages/com.sap.pct.erp.mss.hcm/com.sap.pct.erp.mss.appraisal_document_wd_ui
    pcd:portal_content/com.sap.pct/line_manager/com.sap.pct.erp.mss.bp_folder/com.sap.pct.erp.mss.14.bp_folder/com.sap.pct.erp.mss.14.pages/com.sap.pct.erp.mss.hcm/com.sap.pct.erp.mss.appraisal_document_pmp
    How do I include these navigation targets in my custom MSS role? I mean these pages are not part of the role.
    Thanks,
    BR
    Edited by: BR on Oct 14, 2011 11:46 AM

  • Trigger WF when updating entries through custom MSS screen

    Hi can anyone tell how to trigger a workflow when entry in 2007 infotype is updated using custom MSS screen.What are the steps need to follow.
    Thanks in advance...

    Hello,
    For HR, you can do it using transaction SWEHR1 to define infotype 2007 as "triggerable". Then, use transaction SWEHR3 to link that object with an event.
    I got this from a website called SAPTechnical and I could not post the link here. Go to that website, then, click tutorials and select Business Workflow. Search for the word HR and you'll find an article on this.
    Regards,
    Abdullah Azzouni

  • MSS UWL for PCRs

    Hi,
    I have gone through setting up UWL in How to guide from service market place and setup as in section 3 "minimal configuration". In section 3.7 it is asking to upload configuration file. Is it needed(even after all the steps) because this configuration is specific to MSS?? What else should be done to make PCR stuff to work completely?
    thanks

    well, it could work. I don't know, if you've missed something. just try it
    can you see the workitems, your corresponding user has got in SBWP in the backend, too?
    you can test it like this (if you have customized workflow in your backend):
    - go to the backend, start transaction SWU3 (here you can see, whether workflow was customized)
    - start the verification workflow (F5)
    - you should receive workitems in your inbox (SBWP)
    - you should see these workitems in your UWL, too
    kr, achim

  • MSS UWL customization : Which .XML to modify and How?

    Hello,
    We have EP7 with MSS/ESS ERP 6.0 EHP4 and already configured the UWL system object with alias 'SAP_ECC_HumanResources'.
    I am using the UWL iview from the MSS business package on portal.
    I have a requirement to modify the task tab table removing few columns like 'Priority' and 'Status' etc.
    Tried the option in UWL Admin as  'Click to Configure Item Types and Customize Views Using a Wizard' but that does not give me any dropdown option to modify any view.
    I am going for the option to modify the xml file to implement the above change.
    There are multiple .XML file's as below and I am not sure which one I should modify to change my view.
    1. com.sap.pct.erp.mss.001 [Med]
    2. com.sap.pct.erp.mss.tra  [Med]
    3. uwl.webflow.SAP_ECC_HumanResources [Low]
    The UWL iview from business package has following properties as,
    sap_uwl_viewname = com.sap.pct.erp.mss.AlertView
    useNavigationId = com.sap.pct.erp.mss.Main
    Can someone please advise which .XML file I need to modify and how?
    After customizing the .XML fime do I need to make any change in the iview property as well?
    Awaiting reply!
    Thanks,
    Smita Thorat

    It would be nice if you can get some basics by reading the online help.
    View - http://help.sap.com/saphelp_nw70/helpdata/en/a2/42e9ba01a5463ba10c797fb8e106d3/frameset.htm
    Navigation Node - http://help.sap.com/saphelp_nw70/helpdata/en/e8/5a43bf9b8f406ea0776a3b428688a4/frameset.htm
    Now, let me try to answer your questions:
    Can you please help me understand why the system ID is 'ADHocSystem' and not my new system 'SAP_ECC_HumanResource' with connector 'WebFlowConnector which i have already registered ?
    Is something missing in config?
    The section "Current Item Information" provides information specific to the UWL item that is currently selected.
    I am not sure which item you have selected in your UWL inbox but it appears to be using an XML configuration file that is related to Collaboration. That is the reason you are seeing the AdHocSystem in the properties.
    What is the worflow task associated with this item ?
    Make sure that your task is mentioned in your XML configuration files and also your XML configuration files have a higher priority.
    I can see its pointing to the com.sap.pct.erp.mss.001 configuration.
    Yes - the section "Current Navigation Information" is pointing to the com.sap.pct.erp.mss.001 configuration.
    So as I understand from your response, I need to change the com.sap.pct.erp.mss.001 .XML file and rename it and then upload it to the configurations. and change the iview property UINavigation ID to <'>.
    Is it correct, please advise?
    This is not as simple as that.
    Based on the changes you are trying to make, you will need to make XML changes and upload (with High priority) for various tasks, views, etc.
    Please do some reading and get started with this and you can achieve this in a few steps. 
    - Shanti

  • Error while pointing to Custom MSS Component

    Hello,
    We are implementing MSS on Portal. I have Z copied the standard MSS Webdynpro Component HRMSS_C_CATS_APPR_DASHBRD. To point to the custom one in the Homepage, I have the Custom Component Configuration ZHRMSS_HOMEPAGE_OVP, in which when I refer to the Custom Webdynpro Component created, I get the Error : 'Component <z component name> of UIBB (Window Name) implements an Invalid Interface'.
    What can be causing this?
    Any help would be highly Appreciated.

    Try closing and reopening the project. This is a common issue with Web Dynpro projects and closing and reopening tends to fix it.

  • MSS UWL WebDynproApplication value not found ...

    Hello,
    I am using MSS and would like to approve recorded times. But when I configure the UWL there is a problem with registering the object tpys:
    WebDynproApplication value not found for task TS00700049 in system SAP_ECC_Financials
    Portal Component value not found for task TS00700059 in system SAP_ECC_Financials
    Could someone tell me please what this could be and how I can fix it?
    Thx, Vanessa

    Hello Siddharth Rajora,
    thanks for your answer. I will try it out in the next days.
    Could you tell me which which values I should set for the parameters?
    Thanks,
      Vanessa

  • MSS UWL

    Hi ESS/MSS Experts
    we are implementing Record working time in your current portal, we have the following requirements can some body pls help.
    manager approve working time -> what are the UWL capabilities in terms of Manager approving working times, I believe Manager is having a approve working time workset we can utilize that but client wants to have delegation also for substitutes what is the best approach regarding this.
    on some particular day Manager needs to recieve email notification asking him to approve the working time of his team does this can be done by using backend workflow?
    RAD

    I hope you can do.........better to move this thread to workflow forum
    Koti Reddy

  • Approve link not working in ESS/MSS UWL portal

    Hi experts,
    we are using portal 7.3 with ess/mss.
    in mss when user is approving a leave request, he is not ale to proceed
    after few steps as one link "pprove another request" is not working.
    this i a standrd portal scren in UWL. please suggest.
    Thanks a lot in advance.

    Hello,
    This should be possible with some UWL configuration. Please check the following forum post: http://forums.sdn.sap.com/thread.jspa?threadID=1677777
    Kr,
    Julien

  • Workitems in MSS UWL Inbox.

    Hi All,
    I have an issue in leave request application in MSS tab in UWL on portal.example employee have created two leaves ,those two leaves are visible in Manager's UWL Inbox(MSS).but when click on 1st leave or second leave,any leave request,it is showing only first leave request deatails(means latest one).
    if i have 10 leaves,for all 10 leaves it showing latest one leave details,when i click the leave request.
    So I want to know  which backend 'Feeder class' is triggered when open the leave request.Screen shot is attached.
    help me out ,it is very urgent.
    Regards,
    Kiran

    Kiran,
    In my task the setting's are:
    APPLICATION:HRESS_A_PTARQ_LEAVREQ_APPL
    CONFIGURATION:ZHRESS_AC_PTARQ_LEAVREQ_1
    DYNPARM:LRF_ARQ_MODE=A&LRF_WITEM_ID=${item.externalId}
    NAMESPACE:SAP
    Also I had to change some parameters in my Launchpad using transaction LPD_CUST
    I changed Launchpad MSS/NAV folder,  Time Management, Item, Leave Request Approval target application parameters and parameter matching to
    Target App. Parameters: LRF_ARQ_MODE=A
    Parameter Mapping:(source parameter) REQUEST_ID (target parameter) LRF_REQUEST_ID
    Hopefully this will fix the error for you. We had a combined list of problems that required me to open a OSS thread and apply several notes. I have inserted some screen shots of my task and Launchpad settings as well so you can have a visual.
    Thanks,
    Martha.

  • MSS:UWL subtitution problem

    Hi Friends,
    In MSS Universal work list while creating the Manage Substitution Rules Error displyed on the PoP up window
    "An error occured while starting the iview.
    Application
    http://<hostname>:<port>/webdynpro/dipatcher/sap.com/tckmcbc.uwl.ui~wd_ui/UWLSubstitution;jsessionid=somenumberEnd will run with a wrong client window ID!
    Do not continue; please report this problem to your administrator."
    Please let us know how to solve the problem
    Thanks
    Srikanth

    Hi Srikanth and Anwar,
    We had the same problem, only it happened when opening a PCR form from the "Status Overview" iView in MSS.
    The solution is here: [Note 1171930 - Application will run with a wrong client window ID alert|https://service.sap.com/sap/support/notes/1171930]
    This applies if you have one of the following versions and an iView is launched in a new window:
    - NW04s SP15
    - EhP1
    Best regards,
    Jill

  • Two iView(out of three) give Portal runtime error when refresh MSS-UWL Page

    Hi All,
    i am getting the Portal runtime exception in the MSS->Work Overview ->2nd and 3rd iView on this page.
    First iView is the UWL-Task 2)Attendance Overview and 3) Work Orders
    When i refresh this page "refresh" from pae level refresh. i am getting the below error on 2nd and 3rd iView. Last 2 iView is not displaying.
    Portal Runtime Error
    An exception occurred while processing your request
    Exception id: 02:02_12/01/09_0039_38688450
    See the details for the exception ID in the log file.
    i have tryed to search the log also in the default trace but can not find any log with this exception ID.
    Please suggest me on this ?
    thanks in advance!
    Narpal S Sihag

    Hello,
    I have also a problem like this (error 09_0006_808022650)
    Can you describe your scenario ?
    My scenario is
    - Portal MDM connection OK and working tasks in MDM
    - new UWL System (connector type : MdmUwlConnector)
    - new config file (XML)
    - dedicated Role and dedicated iView (copy of standard UWL iView)
    - clearing cache
    Test : No working Tasks in UWL
    - restarting portail application com.sap.netweaver.bc.uwl
    Test : No working Tasks in UWL
    - running wizard (System Admin, system config, UWL customize IView)
    - new field "TEST" to iView
    - portail create the com.sap.pct.erp.mss.001
    Test : No working Tasks in UWL
    Test : standard UWL crashes with error 09_0006_808022650
    After what, we try roolback, removing XML config, connection, dedicated iView, ...
    Still crashing with error 09_0006_808022650
    Now our developpemnt system don't work for UWL ... (using UWL with ECC connection and was OK for ECC)
    Questions : is your scenario similar to this one ? Is anyone can help us ?
    My best thanks
    Vincent

  • Escalation of items in MSS UWL

    SAP will use Workflow to escalate actions in the MSS Universal Worklist to the next level of manager above if the action is outstanding for more than a certain number of days.
    What I need to establish is, do we have to have the same number of days for each Workflow i.e. Trip Approval, Leave Request etc
    And is this the same other areas of SAP i.e. P2P or Finance?
    Thanks
    WB

    deadline monintoring is available for most of the WFs in the UWL, please check it

  • Custom MSS PCR  scenario & fields

    HI ,
           I have successfully copied the Standard MSS pcr scenarios to Z scenario & forms , as per the guidelines in Development guide for PCR .All the form elements & PCR flow is working fine for Z scenario &
    forms .
                                           I need to add some new textfields/dropdown fields to the Z form & scenario.
    Is there any sap document that provides deeper understanding of custom fields addition to Z forms /scenario  or the only way out is to go through coding .
    Thanks & regards,
    Sahiba Gandhi

    Sahiba,
    There is a ISR cook book(very helpful) available on SAP service market place , click below link.
    [ISR CookBook|https://websmp203.sap-ag.de/~form/sapnet?_FRAME=CONTAINER&_OBJECT=011000358700003984052006E]
    regards
    Sridhar

Maybe you are looking for