Customizing presenter display

Does Presenter Display have to be customized one slide at a time, click done, and then go back into Customize Presenter Display? Is there no way to remain in Customize Presenter Display and move through the slides, not clicking on Done until all slides are ready?
Thanks,
Ben

Sorry. In that case, my question makes no sense. I misunderstood what was happening (I've never used presentation notes before). I thought the amount of space devoted to notes could be increased or decreased for each slide individually.
Thanks for the help.
Ben

Similar Messages

In Keynote09, if i set custom presenter display settings (large presenter notes), and i save the file, will i see my notes in the same way on another computer? Are the presenter display setting saved in the file?

In Keynote09, if i set custom presenter display settings (large presenter notes), and i save the file, will i see my notes in the same way on another computer?
Are the presenter display setting saved in the file?
Thanks for your help!

it wont.
Presenter note display is set per machine.
Surprising nobody in this community knew this.

Customizing presenter display on keynote 6.0

Customizing Presenter Display on Keynote 6.0
I use to be able to customize the presenter display but since I upgraded to 6.0 that option is no longer available. Does anyone know if presenter notes can be moved from the bottom od the screen to the top?
Thank you

Seems that you can't do it anymore. I am continuously bewildered and frustrated with Apple's approach to the latest iwork release. Why o why did they destroy such an awesome suite of tools, make them less intuitive and delete some of the most useful functions - the things that used to make them so much better than microsoft power point and word???

Supported UCM content types by custom content presenter display template

Hi,
custom content presenter display template can only be applied to a Site Studio file? Or the UCM content item type to which the template can be applied can be of different types (says for example an UCM folios or a custom XML file)?
I would like to use the Content presenter in order to customize the presentation of a custom XML file stored on UCM...but as far as I understood I can't do it...I'm correct?
I hope I was clear.
Thanks in advance.
Best regards,
S.

In my scenario, I've a strong requirements in the user interface usability the customer should have in order to perform data entry (it generates the data that made up the XML I'll check-in in UCM): the UI should be more friendly than SS Contributor provides (for example I'll plan to implement it as an ADF page). I've also specifications on the presentation layout.
If I correctly understood, you're suggesting to store in UCM not my custom XML file, but instead a Site Studio data file containing the "same" XML content?
If yes, can I perform the SS data file check-in not using SS Contributor but instead a custom ADF based page? If yes, how can address this?
Thanks a lot.
Best regards,
S.

How can I make sure the Presenter Display will show up?

I use the option "use alternate display to view presenter information", and it works fine with my secondary display at home. The presenter information (Presenter Display) with my notes etc. shows up.
But when I gave a practice talk at my university, the Presenter Display did not show up, although all settings were the same. Back at home with my own secondary display, it works fine again.
How can I make sure that the Presenter Display will always show up on the secondary display?

I have a similar problem. Last year I gave a presention at a client's office using my Macbook. I had the presenter display on my Macbook screen and the presentation on their projector.
A few months ago I upgraded to the latest Macbook Pro 15" (plus there have been upgrades to OS X and Keynote in that time). This time when I tried to run the same set-up my MBP screen went blank. I tried changing settings for Keynote and System prefs with no success. The only way I cuould give the presentation without needing to look at the projector screen was to mirro the displays (and lose the Notes of course). Maybe there is a bug with the latest Keynote?
OS 10.5.7
Keynote 5.0.2 (776)

Getting present display records or Row Id's information in ALV grid?

Hi,
I am using REUSE_ALV_GRID_DISPLAY for ALV display.
I need to get the row id's when user filter the records with any conditions - or any other ways if he selected particular records - I need to process my logic only for those present displaying records in ALV grid.
So How do I can get preset display records in ALV grid or Present display records row id's ?
Please let me know .
And also I am using
CALL FUNCTION 'GET_GLOBALS_FROM_SLVC_FULLSCR'
    IMPORTING
      e_repid = i_repid
      e_grid = lt_grid
In lt_grid there is a table MT_ROID this table is having selected row id's information but I could not read this table. I think this will work only OO ABAP and also method - get_selected_rows is also not working.
I highly appreciate your answers.
Thanks
Kevin

Hallo,
Any ideas?
Thanks.

Can Preview be made to offer a Presenter Display much as Keynote?

When in "play" mode, Keynote offers a highly valued feature known as +Presenter Display+ that shows the current plus the next presentation slide on the computer screen side by side while, at the same time, driving a beamer connected to the display port with the current slide in full screen mode. +What I am looking for is an analogous function in Preview.+
Reason: I am routinely using LaTeX to prepare scientific presentations (and texts) in .pdf format, and this cannot be changed for various reasons. Keynote does not support importing an entire presentation in .pdf format and Adobe Professional offers no Presenter Display facility. So I am out of luck and forced to deliver my lessons and talks in the old way without being able to see the upcoming slide, which is far from optimal if one has collected thousands of slides over the years.
Any help is greatly appreciated. In case there were no solution with the current tool set, I would like to see this understood as an enhancement request by Apple. Thank you!

You should post here for Apple to get your feedback:
http://www.apple.com/feedback/

When I customize my presenter display it doesn't work! I still get on my screen what shows on the main display.

When I customize my presenter display so that I can see the time and the next slide on my screen, it doesn't work. I get just the normal view on both. Any ideas?

In Keynote Presenter Display Preferences ensure that Alternate Display: "Use alternate display to view presenter information" is checked
If using a laptop such as a MacBook Pro, toggle the Dual Display Key (typically F7 - has two rectangles on the key) to switch views
It is probably one or both of those causing your problem.
Good Luck.

Is it possible to get Apple Keynote to show the presenter display instead of just the slides when I record audio using Play - Record Slideshow?

Rather than giving a presentation with an external monitor, I want to sit at my desk and record a presentation for distribution like a podcast. When I click record to add the sound to the presentation I see the slide show on the screen while recording instead of the presenter display. I would like to watch the presenter display while recording so that I can see the next slide as I record. There doesn't seem to be any way to record and watch the presenter display without having an external monitor attached. Does anyone know how to get the presenter display to show while recording without an external monitor?

I also needed to view presenter notes while recording a presentation on my Macbook Pro and could not find a solutions, but I did find a pretty good work around.
I downloaded the Keynote Remote app for my iPhone. I am now able to start recording on my laptop and then hit start slideshow on my iphone to view a portrait mode version of my slides with presenter notes below. I use my phone to flip through slides and slide builds while I'm reading through my presenter notes. When I've reached the end of the presentation I hit esc on my Macbook Pro and I'm done. I'm then able to export the recorded presentation as a Quicktime video and post it on our website, which is exactly what I set out to do.
It takes a little bit of coordination to get used to this method, but I don't need to have a projector or second monitor because my phone takes on the second monitor role.

Why won't my PowerPoint presentations display correctly?

Why won't my PowerPoint presentations display correctly?

In what app? As an email attachment? In another PP compatible iOS app?
Sometimes there are formatting issues with going from the MS office version of a document and opening it in an iOS app that is compatible with the MS file. The apps that are compatible with the MS Office suite of apps do not always open and display on the iPad the same way that they do in Office on your computer.
The iPad is not a full blown computer by any means and this is one of those trade offs that you sometimes have to accept if you want to use the iPad instead of a computer.

When using presenter display, my videos are jumpy. Why?

Hello: I just upgraded to Keynote 3 and am having a nightmare. I use the Presenter display mode so I can see the next slide, (no mirroring) and use a lot of Quicktime video clips in my engagements. In Mirroring mode they run smoothly. In the presenter display mode they stop every second for half a second - making the video extrememely irritating to watch. It worked perfectly in Keynote 2. It 's not the projector - I've tried it on seven projectors that I used prior to Keynote 3 and it happens on all of them. I've tried using different resolutions, different refresh rate modes, etc. Nothing make it work right.
I do 100 speaking engagements a year. HELP! Don't make me go back to PowerPoint!

I have been having the same problem both in KN2 and in KN3. I am a speaker as well and I use about 25 QT videos in my keynote presentation. When I go back and view the QT files outside KN I still have jumpy, choppy parts of my videos. The weird part is that the the videos are choppy at different sections and then they will be fine for a week. I am stumped and from what I see so is Apple. Apple has replaced 2 logic board and I have spent hours on the phone with tech support and still no idea. All I know if about 15,000 people have seen the apple at the front and seen the choppy video and as you can guess all the PC guys always mention how choppy the video was. Not good promo for Apple.
I am interested to see if anyone has any answers to this.
Thanks
Brett

How to start Presenter Display?

Hi all
This is my first go at Keynote '09 and I love it. I want to use the Presenter Display function but I can't find it. I know how to go into "view" to customize Presenter Display options. But for the life of me I cannot figure out how to play Presenter Display on my laptop while playing the display for the audience when I press "play". Please help me see the obvious. BTW-presentation is this Friday morning!
Thanks so much!

But do you have "secondary display"?
Open System Preferences > Displays > Check at the bottom "Show displays in the menu bar".
In the menu bar near the clock you'll see LCD monitor icon. Click on it and make sure you rMac doesn't show everything in Mirror Mode. Turn it off, so that you have 2 separate screens. Now it should work.
And remember — every time you connect new projector, Mac automatically turns on Mirror Mode, which you have to turn off. Mac does remember your chosen mode for previously connected projectors.

Customer balance display shows different balance than Profit center balance

Dear All
Customer balance display shows different balance than
Customer balance with profit center.
Adivse us for the same.
Viral

Hi
Please run 1KEK and then check the balances.
payables and receivables cannot be transferred to Profit Center Accounting online. You must always transfer them periodically.
The purpose of this activity(1KEK) is to:
1. create the opening balances for payables and receivables
2. transfer the balance changes for payables and receivables periodically
Thanks
Prasad

Customer balance display

i need report for customer balances by depending on the doucmen type. in fbl5n customer balance display customer account number + document type level in standard their is no option. is it possible

Hi
In the output you can use sub total or filter option against document type column
Also in the input screen, in 'Dynamic selections' option (after execute button) you can select the respective document types
Thank You,

Customer presentation for BE 6000 is needed ASAP

Customer presentation for BE 6000 is needed ASAP

Hi,
Partner presentation content is available through the the product site at Cisco.com:
http://www.cisco.com/en/US/partner/products/ps11369/products_partner_resources_list.html
Regards,
Andy

Customizing presenter display

Similar Messages

Maybe you are looking for