Customizing request and Workbench request

Can some one clarify me the difference elaborately
Thanks
Krishna

Hi Krishna
Changes to cross-client Customizing objects and to Repository objects are recorded in Workbench requests
In workbench request .... it can be programs(repository objects) and cross client data (ie not specific to one client).
Changes to client-specific Customizing objects are recorded in Customizing requests.
Customer customized data designed for a specific client is transported to another client using customizing request. Most of the cases these requests are something like changing values in tables (that too client specific).
Hope it helps
regards
Srinivas

Similar Messages

  • Difference between customizing request and workbench request?

    Hi ,
    What is the difference between customizing request and workbench request?
    please reply.........

    HI,
    <b>Workbench Requests</b>
    When you change a Repository object of the ABAP Workbench, a query window appears in which you need to specify a Workbench request. You can only save the changes if you have assigned the object to a change request.
    Workbench requests and the tasks assigned to them are normally used to record changes to Repository objects and Customizing for all clients. However, you can also include client-specific Customizing.
    Whether the changes to Repository objects are transported depends on whether a transport route is defined from the current SAP System for the package of these objects. From the system settings, the system automatically determines whether the change requests are transportable and to which target system they should be transported.
    <b>Customizing requests</b>
    Customizing requests record client-specific Customizing settings made in a single client (the source client of the request).
    Automatic recording of configuration activities in the Customizing work for a client can be activated or deactivated for each client with Client Control. If automatic recording is active, a query window appears when you change Customizing settings, asking you to specify a Customizing request.
    Whether Customizing requests are transported or not, does not depend on the objects entered, as is the case with Workbench change requests. The Customizing requests in an SAP System (or in a client if you use Extended Transport Control) are either all transportable or all local, depending on the system setting. The system uses the standard transport layer to determine automatically whether the change requests are transportable and to which target system they should be transported. However, you can change this manually.
    pl reward if it helps.
    Thanks
    Sadhu Kishore

  • Diff between customizing request and workbench request

    hai everybody...
    i want to know the  difference between customizing and workbench request.
    and tell me what is customizing request?
    and also what is workbench request?
    thanks ...
    velu.......

    Hi,
    Workbench Requests
    When you change a Repository object of the ABAP Workbench, a query window appears in which you need to specify a Workbench request. You can only save the changes if you have assigned the object to a change request.
    Workbench requests and the tasks assigned to them are normally used to record changes to Repository objects and Customizing for all clients. However, you can also include client-specific Customizing.
    Whether the changes to Repository objects are transported depends on whether a transport route is defined from the current SAP System for the package of these objects. From the system settings, the system automatically determines whether the change requests are transportable and to which target system they should be transported.
    Customizing requests
    Customizing requests record client-specific Customizing settings made in a single client (the source client of the request).
    Automatic recording of configuration activities in the Customizing work for a client can be activated or deactivated for each client with Client Control. If automatic recording is active, a query window appears when you change Customizing settings, asking you to specify a Customizing request.
    Whether Customizing requests are transported or not, does not depend on the objects entered, as is the case with Workbench change requests. The Customizing requests in an SAP System (or in a client if you use Extended Transport Control) are either all transportable or all local, depending on the system setting. The system uses the standard transport layer to determine automatically whether the change requests are transportable and to which target system they should be transported. However, you can change this manually.
    Hope this info helps.
    Regards,
    Kumar.

  • Diff between cusztmizing and workbench request

    could u please let me know what is diff between workbench and custmizing req ?
    Regards

    Hello,
    customizing req vs workbench request
    Check this info.
    Workbench Requests
    When you change a Repository object of the ABAP Workbench, a query window appears in which you need to specify a Workbench request. You can only save the changes if you have assigned the object to a change request.
    Workbench requests and the tasks assigned to them are normally used to record changes to Repository objects and Customizing for all clients. However, you can also include client-specific Customizing.
    Whether the changes to Repository objects are transported depends on whether a transport route is defined from the current SAP System for the package of these objects. From the system settings, the system automatically determines whether the change requests are transportable and to which target system they should be transported.
    Customizing requests
    Customizing requests record client-specific Customizing settings made in a single client (the source client of the request).
    Automatic recording of configuration activities in the Customizing work for a client can be activated or deactivated for each client with Client Control. If automatic recording is active, a query window appears when you change Customizing settings, asking you to specify a Customizing request.
    Whether Customizing requests are transported or not, does not depend on the objects entered, as is the case with Workbench change requests. The Customizing requests in an SAP System (or in a client if you use Extended Transport Control) are either all transportable or all local, depending on the system setting. The system uses the standard transport layer to determine automatically whether the change requests are transportable and to which target system they should be transported. However, you can change this manually.
    Hope this resolves your query.
    Reward all the helpful answers.
    Regards,
    Jorge Diogo

  • Difference between Change request and Service request

    HI All,
    Can any body tell me the actual difference between Change request and Service Request. Does it have any difference ? Or they are same.

    Are you referring to the project Specific Terms ??? If yes, then following are the differences.
    Change Request - Suppose user is using a Sales Report which displays Revenue by Customer. Now the user wants to see the same by Product as well which is not available in the current report. So the user raises a Change request and the development team works on it to include the same and make it avaialable for the user.
    Service Request - These kind of requests are more likely raised when the user needs access to some system (raise service request to Security team), wants to move a transport to the Production box (raise Service request to Basis Team)..etc.

  • Difference between task request and change request

    What is the difference between task request and change request during sap implementation. In general how many tasks will generate during a normal company inmplementation by any functional consultant?

    Hi,
    Change request and task request are same.But generally change request is generated during newly created objects or reports that are transported and task request is used when u regenerate the change request by modifying that object again and transporting it in new change request.
    A particular change request may contain multiple number of task request but that number depends upon number of objects u transfer during generation and transportation.
    Pls do reward points if ans is useful.
    Regards,
    Suhas.

  • Service request and information request

    This may be the basic question.
    But what will happen for the service request and information request.
    Information request is getting created as service order what will be the process in ecc
    ICSS service request, what will be the process in ecc. is this should be esnt to ecc seperatly or service order can be created in crm.
    PRiya

    thanks

  • Ifference between change request and release request and transport request

    what is the difference between change request and release request and transport request and customization  request?

    Please refer to this link :
    http://help.sap.com/saphelp_nw2004s/helpdata/en/57/38e1824eb711d182bf0000e829fbfe/frameset.htm
    Regards,
    Praveen
    Pl reward if helpful

  • What's the difference between transport request and change request

    Hi, I am reading TMS part of TADM12-1 now, and confused about two terms mentioned in this book, transport request and change request.
    Is there any difference with them? Please advise. Thanks
    James

    In the context of course tadm12 transport request = change request

  • Customizing req vs workbench request

    Hello All,
    Can any one explain what is the difference between them?
    Thanks,
    Vibha

    hi,
    There are two types of Customizing change requests:
    Customizing request
    Customizing requests contain changes to client-dependent tables.
    Workbench request
    Workbench requests contain changes to client-independent tables.
    You can monitor the change requests by project in the project management. The Transport requests tab contains the following functions for the current client:
    Activate CTS functionality
    As prerequisite for creating change requests. When the CTS functionality is active, the pushbutton label changes to Display CTS project data. When the CTS project is finished, the pushbutton label changes to Reactivate CTS functionality.
    Assigned CTS requests
    Go to Transport Organizer request overview, where you can create requests for a project.
    CTS project object list
    The project object list is unchanged. When the customizing project is finished, the complete object list can be exported.
    CTS project status switch
    Sets the project status switch.
    End CTS project…
    End your customizing project. You can reactivate it later.
    See transport control by project for further information about the Change and Transport System (CTS) for customizing projects.
    http://help.sap.com/saphelp_erp2005/helpdata/en/09/88f330db9911d2b41a00609419f767/frameset.htm
    Regards
    Anversha

  • Reg- Package and Workbench  request

    hi
    While creating Workbench request system is not asking Package, insted of that it is asking transport request. earlier we used to save in Packages. where i ahve to settings?
    regards
    raejdnra

    Hi Rajendra Prasad,
    It will ask for the package name only for the first name. If you are trying to change it, it will only ask for a transport request and not a package name.
    Regards
    Aneesh.

  • Merge workbench request and solman request

    I have created a workbench request outside solman, now a solman request is created for that workbench object. how to merge the old request with solman request?
    thanks

    Hi sudeer,
    you can do this by logging into Development system and open the solman TR through Se09 and right click - you will have many options wherin u can select Include Object / merge request and then provide the TR task number created outside solman. Now your solman TR will have the object assigned under it and can be moved to QA and Production through solman.
    Hope it solves your problem.
    Reward points for helpful solution.
    Regards,
    Imran

  • Doubt over Service Request and Web Request in CRM 7.0

    Hi Experts,
    We are in blueprint phase of our project, we need some guidance on the CRM Service module in 7.0. I read a blog that says that service request in crm 7.0 is much improved and it is prefered over service ticket for future releases.
    Can someone please throw some light on what is the difference between a web request (in spro, under web channel-> e service), and a service request. And how do we decide, which one to implement and an example if it can be provided.
    It will be of great help to us.
    Thanks and Regards,
    Rohit Khetarpal

    Hi,
    A web request can be requested for a specific service via internet.
    More information in this link:
    http://help.sap.com/saphelp_crm70/helpdata/EN/f5/c243401a306f13e10000000a1550b0/frameset.htm
    In CRM specific services can be requested and processed using a Web request.
    You can check this link for more infromation:
    http://help.sap.com/saphelp_crm70/helpdata/EN/f5/c243401a306f13e10000000a1550b0/frameset.htm
    Hope this information helps!
    Regards,
    Chethan

  • SCSM 2012 R2 Portal - Publishing Service Request and Change Request.

    Dears,
    Sorry for this questions, it is very basic.
    I want links on how to create below things:
    Create Cataloge about Services we provide such: Create VM, Delete VM, Create User and Mailbox, Add user to group
    How to publish this request to Portal
    Create Change request approval flow such: approve creating user and mailbox
    How to publish above change request
    Thanks

    In addition to Thomas and regarding your assumption "I am not sure if the books help on this points":
    In the
    Microsoft System Center 2012 Cookbook in the chapter 5 starting on page 148 the detailed steps "how to create a request offering for a new user request" are described.
    Each recipe in this chapter describes how to setup a request offering with all related components to get this done.
    The recipes you need in this chapter are:
    Creating Service Request templates, page 148
    Creating Service Request activities, page 151
    Creating Service Offering categories, page 157
    Creating Service Catalog Request offerings, page 159
    Creating Service Catalog Service offerings, page 167
    Publishing Service offerings and Request offerings, page 176
    Working with Service Requests in the portal, page 183
    Creating Service Request notifications, page 187
    There is only one minor mistake in this chapter on page 153:
    "Unanimous (only one reviewer
    needs to approve)" -> it must be "Unanimous
    (all reviewers
    must approve)"
    I am pretty sure the recipes will work because I wrote the chapter. And sorry for the mistake on page 153! ;-)
    Andreas Baumgarten | H&D International Group

  • Difference between workbench request and customizing request in transport

    Hi Experts,
    I am new to SAP BI7 work. i am having basic doubt in Transort request creations
    ususally we create  the requests to transport the objects from Development  system to further systems.
    can anyone please clarify me,  what is the main defference between the Workbench request and Customizing request.
    Thanks and Regards
    Mrudula

    Hi ,
           The Transport Organiser maintains Change Requests.These requests record the changes made to the repository and customizing objects.Based on that objects changed they are
    1)WorkBench Request & 2) Customizing Request.
    Workbench Requests are those that involve changes to cross-client Customising and Repository Objects. The objects are independent of the client.Hence the requests are used for transferring and transporting changed Repository objects and changed system settings from cross-client tables.
    Customizing Requests involve changes recorded to client-specific Customizing objects .These client specific requests are used for copying and transporting changed system settings from client-specific tables.
    Refer this links http://www.allinterview.com/showanswers/57910.html
    customising and workbench request
    Difference between Customizing request and Workbench request
    and many more threads available on this.
    Regards,
    Rahul.

Maybe you are looking for