Customizing request option is not available in charm
Hi Everybody ,
I have a strange issue.
I created a CR and created a single correction .
I changing the status of single correction to "In development" . At this point system opens a pop up for creating Transport requests with work bench and customizing requests. But for few single corrections i am getting option only for work bench .
In pop up i don't have customizing request radio button.
This issue is happening for only few Single corrections not for all .
Can u please help me on this ?
Thanks in advance ,
vijay
Hi Deepak Srivastava,
You can run the following command to enable the feature.
Set-CsconferencingPolicy –Identity Global –EnableP2PRecording $True
Best regards,
Eric
Similar Messages
-
Portal Error 404 (The requested resource is not available)
Dear,
I have faced the below error in our Portal (6.0), I have created a new role that its linked normally with worksets, pages and i-view, all the way to custom SAP R/3 transactions, most of the users are able to see and execute these transactions, but one of them faced the below error, please advise? What it could be the problem?
404
The requested resource is not available.
stack trace
com.sapportals.wcm.protocol.webdav.server.WDServletException
at com.sapportals.wcm.protocol.webdav.server.WDObject.throwNotFoundIf(WDObject.java:54)
at com.sapportals.wcm.protocol.webdav.server.WDGetHandler.handle(WDGetHandler.java:110)
at com.sapportals.wcm.protocol.webdav.server.WDServlet.doGet(WDServlet.java:775)
at com.sapportals.wcm.protocol.webdav.server.WDServlet.service(WDServlet.java:462)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
at com.sapportals.wcm.portal.proxy.PCProxyServlet.service(PCProxyServlet.java:334)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
at com.sapportals.portal.prt.core.broker.ServletComponentItem$ServletWrapperComponent.doContent(ServletComponentItem.java:110)
at com.sapportals.portal.prt.component.AbstractPortalComponent.serviceDeprecated(AbstractPortalComponent.java:209)
at com.sapportals.portal.prt.component.AbstractPortalComponent.service(AbstractPortalComponent.java:114)
at com.sapportals.portal.prt.core.PortalRequestManager.callPortalComponent(PortalRequestManager.java:328)
at com.sapportals.portal.prt.core.PortalRequestManager.dispatchRequest(PortalRequestManager.java:136)
at com.sapportals.portal.prt.core.PortalRequestManager.dispatchRequest(PortalRequestManager.java:189)
at com.sapportals.portal.prt.component.PortalComponentResponse.include(PortalComponentResponse.java:215)
at com.sapportals.portal.prt.pom.PortalNode.service(PortalNode.java:646)
at com.sapportals.portal.prt.core.PortalRequestManager.callPortalComponent(PortalRequestManager.java:328)
at com.sapportals.portal.prt.core.PortalRequestManager.dispatchRequest(PortalRequestManager.java:136)
at com.sapportals.portal.prt.core.PortalRequestManager.dispatchRequest(PortalRequestManager.java:189)
at com.sapportals.portal.prt.core.PortalRequestManager.runRequestCycle(PortalRequestManager.java:753)
at com.sapportals.portal.prt.connection.ServletConnection.handleRequest(ServletConnection.java:240)
at com.sapportals.portal.prt.dispatcher.Dispatcher$doService.run(Dispatcher.java:522)
at java.security.AccessController.doPrivileged(Native Method)
at com.sapportals.portal.prt.dispatcher.Dispatcher.service(Dispatcher.java:405)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
at com.sap.engine.services.servlets_jsp.server.servlet.InvokerServlet.service(InvokerServlet.java:156)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:390)
at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:264)
at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:347)
at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:325)
at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:887)
at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:241)
at com.sap.engine.services.httpserver.server.Client.handle(Client.java:92)
at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:148)
at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33)
at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41)
at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
at java.security.AccessController.doPrivileged(Native Method)
at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:95)
at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:160)check whether user has end user permissions or not
-
HT2534 now the 'none' option is not available????
now the 'none' option is not available????
As I understand it you can only follow the steps that allow you to create an account without a credit/debit card if you do them in exactly as described as you create a new AppleID. If you have already created the AppleID that you want to use, and iTunes is requesting a payment card, then you need to attach a credit/debit card to the account in order to prove that you are resident in the country whose store you are trying to use. Once that has been established you can then set the payment method to None.
tt2 -
"The item you've requested is currently not available in the Indian Store"?
I am getting this message at iTunes Store " "The item you've requested is currently not available in the Indian Store"? " , so unable to connect with iStore .
Also My iPhone 4s is not getting connected with iTunes .
Please help on this..Sorry. You're still not making sense.
I am able sign in there but not able to access iTunes at all.
Sign in where?
I need to access Homepage of iTunes . But whenever i click to any of the option at iTunes I get the above message .
Click what "option"? -
Music option is not available in marketplace in in...
Hi... Music option is not available in marketplace and Zune PC application for the users who have India regional settings on Zune account .... Please make it available for Indian users also ...
Please request Microsoft to make the music option available in marketplace in India ....Hi Deepak Srivastava,
You can run the following command to enable the feature.
Set-CsconferencingPolicy –Identity Global –EnableP2PRecording $True
Best regards,
Eric -
Under purchased items in the APP Store, it say that the item you have requested is currently not available in the US store. The item in question is Mountain Lion OS X which I have already paid for. Any ideas to retrieve this?
When you submit a podcast you should get an email acknowledging the submission. If you subsequently submit it again you will get an error message saying that it's already been submitted.
It then has to be assessed by a real person, which can take some time - a couple of weeks seems to be common, but it can be longer: however since March seems an unreasonably long time.
When it's accepted (or rejected) you should get an email saying so, in the first case giving you a link to the Store page.
More than that I can't tell you: obviously I don't have access to the inner workings of the Store. You could try asking Support, but I have to say you probably won't get a helpful answer. Go to http://www.apple.com/support/itunes/ - click on 'Other iTunes Store Features' in the list and then on 'Podcasts'. You will see a link to either 'Express Lane', which will guide you eventually to some contact options, or you may see a link to email them. -
I have created a PDF and password protected it for view. However, when reading the PDF in Adobe Reader app on the iPad the commenting and annotation options are not available. Is there a way to allow commenting and annotation in the app while password protecting the document?
Is there a setting that needs to be set to allow the annotation features? I set password protection to open and then password for editing and set it to Any except page extraction, but it still did not give the annotation option
-
On i-pad, when I try to enable itunes match, it says, "you are not currently subscribed to iTunes Match. Use iTunes on your computer to subscribe." I am subscribed though! Then it says no to my request and, "item not available in the U.S. store." My Mac will not use update iTunes to any later version than the one I have because my os is also out of date, but when I try to update that i cant, so what do I have to do? Please don't tell me I have to buy a new Mac to be up to date.
On the iOS device you must be logged into the store with the exact same Apple ID you used to originally purchase the service. Go to Setting > iTunes & App Stores and if necessary sign out/in and then enable iTM.
-
After upgrading to Yosemite, iphoto has a white symbol across it indicating it needs to be upgraded. When at the app store the install option is not available?
What version of iPhoto do you have?
iPhoto Upgrade under Mavericks see post by Old Toad -
"view content preview in thumbnails" option is not available in view settings for "finder" for one user
I hope this discussion can be revived. I have the same problem. There seem to be quite a few Japanese sites that don't bother specifying their encoding. Perhaps they are older and from a time when it was not necessary to adhere to standards. Examples: http://www1.plala.or.jp/CUE/cave_yozawa.html, http://chigaku.web.fc2.com/saitama/sanchi/youzawa/youzawa.html. Happy to upload screenshots, but how?
Is there a way to tell Safari what encoding to use if the web page fails to do that? -
How can I get my clock to remain on the correct time when starting bootcamp and windows XP? wireless option is not available.
Have a look at solutions in here https://discussions.apple.com/message/10689317#10689317
Regards
Stefan -
The page you requested is currently not available. Please try again later .
The message occurs, when I try to view a message from my PC. On other PCs the problem does NOT occur.
Original message:
" The page you requested is currently not available. Please try again later ...
If you have questions, please send email to [email protected]
For more information on the Oracle Collaboration Suite features, please refer to Oracle Technology Network"
Pls help.
Borys Luberais this related to collab suite. if ys pls post in collab suite forum. this is reports forum
-
I used to look my photos in my tv using apple tv, now i can't when i access through apple tv/ computer/ my library photo option is not available, i check home sharing and which photos i'm sharing from my mac/itunes but i still can share photos w/apple tv
Morning JJFH,
Thanks for using Apple Support Communities.
If after setting up Home Sharing, you cannot access your shared iTunes library over your home network from your Apple TV, take a look at this article:
Troubleshooting Home Sharing
http://support.apple.com/kb/ts2972
Best of luck,
Mario -
Requested circuit/channel not available
Hello,
I have a problem with a PRI link. We have installed CCM 3.3(3) and a 3745 with a PRI link to the telco. The 3745 is configured as a MGCP gateway. When I try to initiate an outbound call, I get the following Q931 debug message:
*Mar 1 01:47:14.967: ISDN Se3/0:15 Q931: TX -> SETUP pd = 8 callref = 0x0005
Bearer Capability i = 0x8090A3
Standard = CCITT
Transer Capability = Speech
Transfer Mode = Circuit
Transfer Rate = 64 kbit/s
Channel ID i = 0xA9839F
Exclusive, Channel 31
Calling Party Number i = 0x0081, 'XXXXXXX'
Plan:Unknown, Type:Unknown
Called Party Number i = 0x80, 'XXXXXXXXXX'
Plan:Unknown, Type:Unknown
*Mar 1 01:47:15.127: ISDN Se3/0:15 Q931: RX <- RELEASE_COMP pd = 8 callref = 0x8005
Cause i = 0x82AC - Requested circuit/channel not available
When I try an inbound call I get a busy signal, and a similar debug message (if I use another router to initiate that ISDN call).
This is the "show ISDN state" screen:
ISDN Serial3/0:15 interface
dsl 0, interface ISDN Switchtype = primary-net5
L2 Protocol = Q.921 L3 Protocol(s) = CCM-MANAGER
Layer 1 Status:
ACTIVE
Layer 2 Status:
TEI = 0, Ces = 1, SAPI = 0, State = MULTIPLE_FRAME_ESTABLISHED
Layer 3 Status:
0 Active Layer 3 Call(s)
Active dsl 0 CCBs = 0
The Free Channel Mask: 0xFFFF7FFF
Number of L2 Discards = 1, L2 Session ID = 13
So I presume there is nothing wrong with the signalization??
I contacted the telco person, and he told be that he sees some kind of BLOCKING state on our side of the PRI link.
Please help or give at least some guidelines what to try next!
Thanks in advance...Haha, 11 years later this post save us on CUCM 8.6.2, disabled "Inhibit restarts at PRI initialization" Works Excellent on the E1 affected.
THANKS A LOOOT. -
Http Status 404, The Requested resource is not available
Dear Friends,
I am getting error with my tomcat that " The Requested resource is not available"
Kindly help me , What is the wrong with my code.
I am using Eclipse 6.0.1, Tomcat 5.5.20, jdk 1.5.0, j2sdk 1.4.0
My application is just to print user datas and my files are
*1. login.jsp*
<html>
<head>
<title>login Page </title>
</head>
<body>
<form action="login" method="post">
<table>
<tr>
<td>UserName</td><td><input type="text" name="username"/></td>
</tr><tr>
<td>Password</td><td><input type="password" name="password"/></td>
</tr>
<tr><td><input type="submit" value="login"/>
</tr>
</table>
</form>
</body>
</html>
*2.web.xml*
<web-app>
<servlet>
<servlet-name>login</servlet-name>
<servlet-class>login</servlet-class>
</servlet>
<servlet-mapping>
<servlet-name>login</servlet-name>
<url-pattern>/login</url-pattern>
</servlet-mapping>
</web-app>
*3. login.java*
import javax.servlet.*;
import javax.servlet.http.*;
import java.io.*;
public class login extends HttpServlet
public void doPost(HttpServletRequest req, HttpServletResponse res)
try
PrintWriter out = res.getWriter();
String name = req.getParameter("username");
String password = req.getParameter("password");
out.println(name+" servlet page");
}catch(Exception e)
e.printStackTrace();
File Directory:
Myapp
! !-->src
! ! !--> login.java
! !-->WebRoot
! !--> META-INF
! !--> WEB-INF
! !--> Classes
! !--> login.class
! !--> lib
! !--> web.xml
-->login.jsp
CATALINA_HOME C:\Program Files\Apache Software Foundation\Tomcat 5.5
CLASSPATH C:\Program Files\Apache Software Foundation\Tomcat 5.5\common\lib\servlet-api.jar;C:\Program Files\Apache Software Foundation\Tomcat 5.5\common\lib\jsp-api.jar
path C:\Program Files\Java\jdk1.5.0_05\bin;C:\Program Files\Apache Software Foundation\Tomcat 5.5\bin;C:\j2sdk1.4.0\bin
Please anyone give me the solution to solve my problem.
Thank youTry moving your class file to a package
<servlet-class>com.logon.login</servlet-class>
! !-->src
! ! !-->com
! !-->logon
! !--> login.java
Maybe you are looking for
-
How Can I Use the Onboard VGA WITH a PCI-E Display Adapter?
Hi everyone, My machine is a HP ProDesk 490 G2 MT and i have AMD Radeon HD 8490 DP (1GB) PCIe x16 Crd E1C64AA as my graphic. I'm newbie in this kind of hardware stuff. but my question is if i have a several plugs on my computer why i just can display
-
If I purchase an app/game on my desktop iTunes, and then delete it
and then delete it from my phone later, can I re-download it (for free of course) on my iPhone's iTunes store???? Or will it charge me again? Because I know you're free to re-download apps you've already purchased on desktop iTunes, I just want to ma
-
ITunes not reading iPod Classic?
Hello, it's me again. This time, I plugged my iPod in. iTunes is working this time. However, it's not reading my iPod. My computer recognizes it, my iPod recognizes my computer but iTunes isn't picking it up. Any ideas?
-
Error: 1392 When installing i-Tunes 7
Help! My son has just purchased an iPod. Went to install iTunes and when the installation was "creating folders" I received the following error message: "Could not set file security for file 'C:\Documents and Settings\All Users\Application Data\Apple
-
Hey all, I am a new mac user, i just picked up a pro yesterday and am loving it so far. However, when I was using my top sites i was trying to organize it because I had the same site repeating, so I wanted to clear it up. I thought hitting disable cu