Customizing request prompt

What is the use of customizing request prompt for every customizing we do?

Hi,
When ever there is a change which needs to be saved in Customization table/view, system is configured to promt for a Customizing request.
Basically a Customizing request can contain several customization changes or new customisation. This requests are used to transport the changes to the required client.
Generic Example:
Development Client (Only in this Client Customisation Changes are allowed) -
>Quality Client (The customization request is transported from Development client, hence no direct changes to customisation is possible) -
>Production client (The customization request is transported from Development client, hence no direct changes to customisation is possible - Few changes which are generally performed in this client are like "Factory calender setup, Number Ranges configuration).
Regards,
Prasobh

Similar Messages

  • Creating a new job and position prompts customizing request...

    Dear All,
            I created a Job and Position through PP01 transaction. I am facing 2 issues while doing so...
    1. System prompts for Customizing request when i try to save the new entry.
        What table/settings do i need to maintain for turning of the customizing request promptings.
    2. Once i save the entries(after entering some dummy customizing requests), when i check the
        HRP1000 table for the new jobs and positions... The table entry shows 2 records for each Job and     
        position. One entry with Plan version '.:' and another with active Plan version '1'.
        I need to have just one entry in HRP1000 table for each job/position with ACTIVE plan version.
       I checked T77S0 table, it has active plan version maintained against the PLOGI-PLOGI entry.
       Please let me know what table i need to maintain to handle my requirement.
    Regards
    Nanda

    Hi Nanda,
    When you create new job or position in sandbox system it will not ask for the request number,since you generally dont transport the objects from sandbox to test system.
    When you create a new job or position in development system, it will always ask for request number. This is because, in most of the cases, you need to transport the job and position to test system and then to production system.
    Without a customizing request  you wont be able to transport those changes to next system.
    Thanks,
    Supriya.

  • Customizing Request not Prompting when i save

    Hi Everybody
    I configured some settings  in spro like Requirent Strategy, MRP Group, ATP Group etc.
    While creating those objects customizing  request was assigned to all my configuration settings in spro.
    Recently i unlocked the request in se03 and deleted the Customizing request because it was not in the sequence.
    Now when i go to the same transaction and save the object it is not prompting me new customizing request.
    When i change existing settings then system is prompting the Custoizing request.
    I would like to reassign custoizing request for all my objects which were created earliar.
    Please help.
    Thanks in Advance.

    Hi Mithun
    Thanks for the reply.
    See if you can change some text fields and try saving it.
    I tried with changing the Text , system is prompting me the Request but we have more than 37 Product Allocation Objects and Sequence.
    Else on the menu bar Table view option, select transport, it would ask you for a request.
    I tried with this option, syste is not picking the objects into request.(Request is generated but system is not picking any objects when i check it in se09 under the node of the request)
    Please sugest me.
    Thanks

  • Customizing Request not Prompting

    Hi Everybody
    I configured some settings  in spro like PROUCT ALLOCATION, ATP Group etc.
    While creating those objects customizing  request was assigned to all my configuration settings in spro.
    Recently i unlocked the request in se03 and deleted the Customizing request because it was not in the sequence.
    Now when i go to the same transaction and save the object it is not prompting me new customizing request.
    When i change existing settings then system is prompting the Custoizing request.
    I would like to reassign custoizing request for all my objects which were created earliar.
    Please help.
    Thanks in Advance.

    Hi,
    If you don't want to make changes and want to use the changes you did earlier and deleted, go to the several activities in SPRO, select table view and after Transport. It will prompt you asking for the transport order.
    Regards,

  • Customizing Request not Prompting while saving the spro setting

    Hi Everybody
    I configured some settings  in spro like PROUCT ALLOCATION, ATP Group etc.
    While creating those objects customizing  request was assigned to all my configuration settings in spro.
    Recently i unlocked the request in se03 and deleted the Customizing request because it was not in the sequence.
    Now when i go to the same transaction and save the object it is not prompting me new customizing request.
    When i change existing settings then system is prompting the Custoizing request.
    I would like to reassign custoizing request for all my objects which were created earliar.
    Please help.
    Thanks in Advance.

    Hi,
    Generally in SAP If u have changed any object whether it is customize or Workbench object once it is saved in one request and if u have deleted the same form request and if u r trying to change the same objects then the system will automatically save into the  same request.
    IF the old request is released then system will ask new request.Please check the old request ...
    Regards,
    Srinivas

  • Prompt for Customizing request when saving Sales Employee (VPE1)

    Hi,
    When we try to create Sales Personnel through SD Menu path (VPE1), on saving the system prompts for customizing  request. Since this transaction is a master data and we dont transport this data to our production system. Suggest me a way to avoid this transport request while creating Sales Personnel.
    We are currently using version 3.1i and upgrading to ECC6.0. In 3.1i we use transaction PAL1 to create Sales Personnel However it will not prompt for Customizing request
    Also checked the SAP Note Note 854390 - FAQ: Use of the sales representative in SD without HR
    Help me on how to turn off this customizing request. Basis and Security team could not able to turn this off.
    Regards,
    Pradeep Maddi

    hello, friend.
    you have 2 choices:
    1.  create a transport request, save the data but do not release it for transport.
    2.  when the dialog asks you for transport request, just close this.  the system will give you a message about links.  just ignore it.
    hope this helped.  reward if so.
    regards.

  • XI: Alerts - Step by step issue " Prompt for customizing request"

    I am going through Michal Krawczyk's blog XI: Alerts - Step by step
    Michal Krawczyk and between step 4 and step 5 I run up against an issue.  I cannot save it because I get a popup saying "Prompt for customizing request" then I click the list button and it says " You can only include objects of this type in customizing requests only" ( a little redundant I must say ) but anyway - the net result is I can't save and lose all the work I just did.
    Any help would be greatly appreciated!
    Thanks - Andrew

    Scott,
    I have replied in your another thread for this issue. I request you to please make one thread only so that it will not confuse you and the SDNers.
    ---Satish

  • LSMW recording SM30, prompt for customizing request

    Hi everyone,
    I'm trying to use lsmw for uploading data into a customizing table. For this I recorded the creation of an entry with transaction sm30. At the end of the recording (when saving) the prompt for a customizing request pops up. When executing the resulting batch input, it get's confused (in my opinion because of the transport request popup in the recording).
    Is there a way to prevent the popup?
    I've read in a different thread that I can create 1 entry, then do the recording for the lsmw in the same session. This sounds good to me, but I don't see how to do this.
    If anybody has an idea how to solve this, it would be great.
    Regards,
    Monika.

    Hi
    No u can't prevent that popup, because u're trying to update a customing table: you should considere two main things:
    - The call of the request popup can depend on the kind of the client, i.e how the client (dev, test or prod) is set;
    - If the cleint is closed, so the modifications are not allowed (for example in production system), your lsmw project can't works.
    Anyway by SE11 u can try to create a maitenance view table based on the database table u need to update, leave cutomizing flag and generate the maintenance program (for trx SM30) for this new view: probably now it shouldn't show the popup for the transport (but I'n not sure), if it works u can use it in your project.
    It's very hard to manage a table control in LSMW, u can't know how many recodrs u need to update and u can't change the bdc program generated for lsmw.
    In this situation the best solution is to insert only one record: i.e. for every record u need to update:
    - CALL SM30
    - Press NEW ENTRY
    - Insert the new record to the top of table control
    - Save
    - exit
    In this way your bdc program doesn't depend on the number of records, as you manage only one record, i.e your project will create a bdc session with as many transaction as many records to be inserted.
    Max

  • Prompt for customizing request while saving changes on infotype

    I have the problem when I am going to change a employees infotype (e.g. infotype 0001 or 0002) using transaction PA30.
    If I want to save this action, the screen appear dialog box: "prompt for customizing request."
    Has anyone experienced such a problem? If so, can you please tell me how
    did you fix it.
    Thanks in advance.
    Nils

    Hi,
    For master data maintenance no need of transport request. Ask your basis people to remove transport request option for master data maintenance. Earlier I faced the similar problem I report basis team and they removed it.

  • Regarding customizing request

    Hi,
    I did some modification to existing Org chart in PPOME tcode.
    it was asking for customizing request.i have given wrong customizing request.
    now i want to remove the that customizing request and i want to assign it some other request.
    my question is if i delete the current customizing request number will it going to delete the original record.
    if it won't delete then if the refresh the org chart will it going to ask the customizing request again .
    Please can any one confirm this for deleting the customizing request.
    regards
    paveee

    goto that custmising request.
    click on the objects present in that request.
    Delete the object from that request - Right click on the the object & clicl on delete.
    goto the object again & edit something. it will again prompt for the transport request.
    assign a correct customising request.
    Reward points if helpful

  • Change "Create a request" button in SMPortal (SSP) to point to custom Request Offering (not Generic Incident Request)

    Hello MSSCSM community,
    is it possible to change the request offering mapping of the "Create a request" button (Image1)? By default it points to "Generic Incident Request" request offering. But this is related to a sealed MP and cannot be edited. So i cannot
    change name, image, user prompts etc. I created a new custom request offering "Incident request" and disabled "Generic Incident Request". But now the "Create a request" button throws an error (Image2) because Generic
    Incident Request is not available anymore. How to map the button to a custom request offering?
    Thanks an regards
    Vesp

    Thanks a lot for your replies. The blog entry is very interesting for having a diffrent "Request offering" mapped to the button instead of standard "Genereic Incident Request (EN)". But i now figured out a very easy solution for me.. i unpublished and disabled "Genereic
    Incident Request (EN)" and then system takes the sealed "Genereic Incident Request" (without (EN)) that cannot be edited. I simply reenabled and published "Genereic Incident Request (EN)" and now i can modify this completely and its mapped to the button
    by default. I think system always uses sealed "Genereic Incident Request" as fallback. Only constraint is that i cannot change the MP and Template in Request Offering "Genereic Incident Request (EN)". But template can be edited also.. so its fine for
    me. Sorry for this kind of questions, i am new to the MSSCSM topic.
    Maybe this will get more flexible in future releases of scsm.
    Thanks
    Vesp

  • F.62 customer request

    Dear All,
    My doubt is I have created fb12 customer request and if I check in f.64 what request is created here comming there but I want all the request for customers we have 3,000 customers and we have selected tr.cd.f.64  field open item account all the 3,000 customers
    but I want to get print out of all the 3,000 customers at once is any tr.code is there if so please advice me.
    Thanks & Regards,
    satishkumar.m

    HI phani,
    thanks for prompt reply as per your sugestion gone through that tr.code ie., f.27
    Correspondence type SAP10 is not permitted since no date required
    Message no. FB461
    Diagnosis
    You entered correspondence type SAP10 which, according to default settings, requires no date specification.
    System Response
    Abnormal termination of processing, since in the context of the report you want to currently start, only correspondence types which require a date specification are allowed.
    Procedure
    Please check your entry. If necessary, first change the default settings for the entered correspondence type by means of customizing. However, make sure that no inconsistent entries exist in the trigger table. If necessary, you must first process the entries or set them to completed so that these can be deleted.
    pls tell to how to overcome this issue.
    awaiting for your reply.
    Thanks & Regards,
    satishkumar.m

  • Disabling the customizing request for GJG1 and GJG2

    Hi,
    Our configurator are customising the data in the 'Change actual distribution cycle for joint venture' segments. For every segment / distribution cycle  change, its prompting the customizing change request. we want to avoid creating customizing request for every segment and treat this as master data. The transaction is question are GJG1 and GJG2 and Tables:  T811C, T811F, T811K.
    Is there a table or transaction where it can disable from creating a transport in STMS  for each change for segment allocation?
    how to change the Assessment Cycles not be a transportable?
    Appreciate any help
    Thanks,
    Sunil

    Sunil,
    ideally in Production , these will be set as non editable , and hence the request is being created so that the same can be transported.
    If this is happening in Dev , how do you want the changes to be carried forward ,
    otherwise if it is in PRD , is it allowed to create local objects in production ?
    This will be a BASIS setting .
    Arun
    Assign points if useful ..
    P.S I don't think this is the right forum for this post , suggest you try the ERP forum instead..

  • Releasing Customizing Request

    Hi All,
             I have created a layout in FBL3N in development and saved it as a customizing Request.
    While releasing this request it show an error message
    "8: Transport carried out with errors.
    Individual objects could not be transported successfully"
    How to solve this issue.
    Thanks,
    Bala G

    Dear Markus ,
    Thanks for your reply, I am repeating the same with for clear understanding
    this customizing request created and released, after releasing the request ( carries 5 objects in main task and 2 in Sub task)
    from DEV to PRD , when we opened the same request after importing into PRD we found the main task objects are available but
    the subtask or child task objects are missing, we tried recreating a new task and tried but still not working what is the problem
    Hope this is clear?
    regards
    Praveen

  • How can I re-release the Customizing request

    Hi,
    Yesterday, I released a customizing request to QAS. At the QAS, I used the T-code STMS to check the import request, I could not find out it.
    But, today, I released another customizing request to QAS. I can find out it. I don't known what had happened.
    Could I re-release the CR? How to deal with this question?
    Waiting for answer, THX
    jk

    Dear all,
    Thanks for your time. The problem is still have.
    I have released the Task and Sub-task, and I checked the import queue in which there isn't the TR.
    I released a new customizing request, it can be find out the import queue.
    I think the transport routes maybe have problem at yesterday, so I want to re-transport the customizing request.
    Which method can I choose to do that?
    jk

Maybe you are looking for