Customizing root folder for our custom and standard reports

Hi Experts,
We are planning to have customizing root folder for our custom and standard reports,
I have couple of questions to do this customization.
1)     How do we setup root folder as default instead XA or SSA for all the users?
2)     What are the implications on Spend adviser reports, we will not customize spend adviser, planning to use standard SPD?
3)     Do we have any developments required or setup at visual Admin level?
Someone can guide me what would be the pros and cons along with above concerns? Your reply will be highly appreciated.
Regards,
Mahesh

Madhav,
Do i have further inputs on this?
Regards,
Mahesh

Similar Messages

  • Customized Email Content for Firefighter login and Log report

    Hi Experts,
    Is it possible to customize the email content (subject as well as body) for Firefoghter login and log report notifications. This is required on GRC AC 5.3 SP10.
    Thanks
    Davinder

    No, D P. You can not customize FF emails. They are hard coded in the ABAP programs.
    Alpesh

  • Customized and Standard Report

    How we can differentiate between Customize and Standard report???

    Hi Mike
    thats a tough one, the PO generation is a bit restrictive to say the least when it comes to customizing. It sounds like you have worked out how to get your own template in there to render the PO.
    On the data front, all I can think of is to customize and replace the seeded PO view with one that incorporates your extra data.
    Or, get into the page customization world and write your own extract and format concurrent program/procedure and then hook it onto the buttons where you want to launch it.
    You might have more luch, response wise from the EBS PO forum.
    Procurement : Procurement
    OAF: OA Framework
    Regards
    Tim

  • How we can inactive the credit account for our customer

    Hi Gurus,
    Can you please let me know, Where we can deactivate the credit account for our customer?
    Thanks in advance
    Mayank Tyagi

    Hi Mayank,
            As per my Understanding.
    here you are trying to enter the payer code different as sold to party.
    if its so,
    both ur customer-sold to & Payer has credit master records ( check in FD32).
    both might have maintained different credit limits.
    so when you enter the payer different as customer, based on credit management configuration - systems check for the Payer as well as Sold to's credit records, if both r different then system prompts this error message.
    As i know, it wont allow you to proceed further.
    this is the reason in many cases your sold to & payer will be same.there could be chance, that your ship to will be different.
    my query is: - why you are trying to enter 2 different ( sold to & payer) partners?
    any doubts plz let me know.
    hope it clears,

  • Need to request S-User for our customer

    Dear All,
    Could anybody please give me the link that we could request S_User for our customer? Thanks
    Regards
    Yuka

    Find the link by myself.

  • How to Change Outlook Default Folder for Insert-Attachment and Save Email/Attachemnt while Outlook is open (VBA)

    Hello,
    Office 2010 32bit, VBA
    Is it possible to programmatically do the above while Outlook is running?  If so, I'm hoping to make that change from a Word macro.
    I tried tinkering with the reg key and that doesn't work because it appears Outlook only respects it at startup time. Similary changing Word File-options-location of documents is respected only when Outlook starts.
    I'm looking to seamlessly keep Outlook's default folder in sync with Word's default folder as the users change working folders in Word, which they do many times per day (and they chose the folder among a couple of thousand possibilities).
    I'm hoping there is a difficult-to-find Outlook object I can manipuate to get to the end result.  IF there is such an Object I have been unable to find it.
    Many thanks!
    Julie

    Hi Julie,
    Based on my research, I think outlook object model doesn’t provide the way to change the default folder for insert attachment and save email/attachment.
    The way to change it is that we need to modify the registry setting and the outlook app should be restart.
    # How to set the default attachment folder in Outlook
    https://support.microsoft.com/kb/252732?wa=wsignin1.0
    You may create the add-in to custom these actions (e.g. attach attachment, save email)
    Regards
    Starain
    We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
    Click
    HERE to participate the survey.

  • How to create customer master data for walking customer in retail

    hi experts !!!!!!
    for retail industry e.g books trading industry
    how to create customer master data for walking customer in retail
    its dummy or one time customer
    if i create one time customer then same customer number can i use for every new order and every new customer how ?????
    thanks

    Dear Hanumant,
    As per my view,,
    You can use one time customer functionality to full fill your requirement.
    When you create sales order with one time customer system take you to the customer data maintanence screen through that you can maintain the one time customer data.
    Same one time customer number you can use for every new order through maintaining different data.
    I hope this will help you,
    Regards,
    Murali.
    Edited by: Murali Mohan.Tallapaneni on Dec 19, 2008 6:08 AM

  • I'm having trouble finding my root folder for configure server settings

    I'm trying to start a flex mobile project and I cant find my root folder for the server location section
    here is a shot of  what I'm looking at
    can anybody help?

    What country are you in ? Is this the app : Health magazine ?

  • How can I change the root folder for .dtc?

    After I installed the DS, I find the root folder for .dtc is my local directory such as:
    C:\Documents and Configuration\WChen\.dtc
    How can I change it to:
    D:\Projects\.dtc

    Gangadharayya. That points to the workspace used by Eclipse. The '.dtc' folder is used if you're working with DCs and, I'm pretty sure, has nothing to do with the Eclipse workspace.
    Wei, just curious. Why do you want to change that path? Don't misunderstand my question. SAP has given me the "Why would you want to do THAT?" response plenty of times whenever I brought up a situation that was different than they way they thought developers would create apps or use their product(s).
    So I'm not asking "why do you want to" because I think you're wrong in wanting to do that. I'm just curious.
    I can't say for sure but I suspect that it might be not so easy to do that. I've installed Netweaver several times and I don't remember EVER being asked for a path for the '.dtc' folder structure.
    From my personal experience, the whole NDS, J2EE engine, install process, etc. is so touchy that once I've got it installed I don't want to mess with it. So I  was just curious if there was some technical reason or just personal preference for changing the folder.

  • I enabled computer home sharing between my fiance's apple computer and my windows. I am able to play his music on my computer now, however I am making playlists for our wedding, and am unable to transfer any of his songs to my playlists.How can I do this?

    I enabled computer home sharing between my fiance's apple computer and my windows computer, so I now can play his music on my computer; however, I am making playlists for our wedding and am unable to transfer any of his songs to my playlists. How can I do this?

    Thanks
    Are you sure that if I use my windows log in rather than my husbands, then open itunes it won't delete all his hundreds of songs and overwrite with mine? 
    I want to maintain my own apple ID login and he wants his but without losing his songs.....
    how do i transfer the content of my itunes including apps and songs to the new computer.  There doesn't seem to be an easy explanation on here. Do I just plug my iPhone in and it will all transfer?

  • HOW TO CREATE SEVERAL folder for the generation and READING FILE

    HOW TO CREATE SEVERAL folder for the generation and READING FILE WITH THE COMMAND utl_File.
    please give an example to create 3 folders or directories ...
    I appreciate your attention ...
    Reynel Martinez Salazar

    I hope this link help you.
    [http://www.adp-gmbh.ch/ora/sql/create_directory.html]
    create or replace directory exp_dir as '/tmp';
    grant read, write on directory exp_dir to eygle;
    SQL> create or replace directory UTL_FILE_DIR as '/opt/oracle/utl_file';
    Directory created.
    SQL> declare
      2    fhandle utl_file.file_type;
      3  begin
      4    fhandle := utl_file.fopen('UTL_FILE_DIR', 'example.txt', 'w');
      5    utl_file.put_line(fhandle , 'eygle test write one');
      6    utl_file.put_line(fhandle , 'eygle test write two');
      7    utl_file.fclose(fhandle);
      8  end;
      9  /
    PL/SQL procedure successfully completed.
    SQL> !
    [oracle@jumper 9.2.0]$ more /opt/oracle/utl_file/example.txt
    eygle test write one
    eygle test write two
    [oracle@jumper 9.2.0]$
    SQL> declare
      2    fhandle   utl_file.file_type;
      3    fp_buffer varchar2(4000);
      4  begin
      5    fhandle := utl_file.fopen ('UTL_FILE_DIR','example.txt', 'R');
      6 
      7    utl_file.get_line (fhandle , fp_buffer );
      8    dbms_output.put_line(fp_buffer );
      9    utl_file.get_line (fhandle , fp_buffer );
    10    dbms_output.put_line(fp_buffer );
    11    utl_file.fclose(fhandle);
    12  end;
    13  /
    eygle test write one
    eygle test write two
    PL/SQL procedure successfully completed.
    SQL> select * from dba_directories;
    OWNER                          DIRECTORY_NAME                 DIRECTORY_PATH
    SYS                            UTL_FILE_DIR                   /opt/oracle/utl_file
    SYS                            BDUMP_DIR                      /opt/oracle/admin/conner/bdump
    SYS                            EXP_DIR                        /opt/oracle/utl_file
    SQL> drop directory exp_dir;
    Directory dropped
    SQL> select * from dba_directories;
    OWNER                          DIRECTORY_NAME                 DIRECTORY_PATH
    SYS                            UTL_FILE_DIR                   /opt/oracle/utl_file
    SYS                            BDUMP_DIR                      /opt/oracle/admin/conner/bdumpRegards salim.
    Edited by: Salim Chelabi on Apr 4, 2009 4:33 PM

  • Java.lang.IllegalStateException: INTERNAL ERROR: Global root folder for pre-installed component archives not defined.

    Hi Gurus,
    I am working on NWDS 7.01.00 after opening NWDS, I am getting this error. My error log file is:
    java.lang.IllegalStateException: INTERNAL ERROR: Global root folder for pre-installed component archives not defined.
    at com.sap.tc.devconf.impl.DevConfFileSystemLayout.getRootPathForCompartment(DevConfFileSystemLayout.java:202)
    at com.sap.tc.devconf.impl.DevConfFileSystemLayout.getAbsoluteSCRoot(DevConfFileSystemLayout.java:76)
    at com.sap.tc.devconf.impl.DevConfFileSystemLayout.getAbsoluteTopLevelDCsRoot(DevConfFileSystemLayout.java:169)
    at com.sap.tc.devconf.impl.LocalSCNode.initializeTopLevelDCNodeList(LocalSCNode.java:41)
    at com.sap.tc.devconf.impl.LocalSCNode.<init>(LocalSCNode.java:24)
    at com.sap.tc.devconf.impl._Factory.createLocalSCNode(_Factory.java:385)
    at com.sap.tc.devconf.impl.DevelopmentConfiguration.getTopLevelDCsForLocalCompartment(DevelopmentConfiguration.java:3415)
    at com.sap.tc.devconf.impl.syncdb.ComponentSyncDB._initializeLocalEntries(ComponentSyncDB.java:788)
    at com.sap.tc.devconf.impl.syncdb.ComponentSyncDB.initializeLocalEntries(ComponentSyncDB.java:759)
    at com.sap.tc.devconf.impl.syncdb.ComponentSyncDB.initialize(ComponentSyncDB.java:436)
    at com.sap.tc.devconf.impl.syncdb.ComponentSyncDB.retainEntriesFromCompartment(ComponentSyncDB.java:824)
    at com.sap.tc.devconf.impl.LocalDCScanner.refreshSyncDBForLocalDCs(LocalDCScanner.java:103)
    at com.sap.tc.devconf.impl.DevelopmentConfiguration.<init>(DevelopmentConfiguration.java:378)
    at com.sap.tc.devconf.impl._Factory.createDevelopmentConfiguration(_Factory.java:354)
    at com.sap.tc.devconf.Factory.createDevelopmentConfiguration(Factory.java:103)
    at com.sap.tc.devconf.DevelopmentConfigurationFactory._addConfiguration(DevelopmentConfigurationFactory.java:2062)
    at com.sap.tc.devconf.DevelopmentConfigurationFactory.addConfiguration(DevelopmentConfigurationFactory.java:761)
    at com.sap.tc.devconf.DevelopmentConfigurationFactory.addConfiguration(DevelopmentConfigurationFactory.java:696)
    at com.sap.tc.devconf.DevelopmentConfigurationFactory.addConfiguration(DevelopmentConfigurationFactory.java:667)
    at com.sap.ide.eclipse.component.devconf.DevConfManager.createDefaultDevConf(DevConfManager.java:341)
    at com.sap.ide.eclipse.component.devconf.DevConfManager.getInstalledDevConfs(DevConfManager.java:442)
    at com.sap.ide.eclipse.component.devconf.DevConfManager.initializeDevConfs(DevConfManager.java:135)
    at com.sap.ide.eclipse.component.devconf.DevConfManager.initializeDevConfs(DevConfManager.java:109)
    at com.sap.ide.eclipse.component.provider.ComponentProviderPlugin$1.run(ComponentProviderPlugin.java:82)
    at org.eclipse.swt.widgets.RunnableLock.run(RunnableLock.java:35)
    at org.eclipse.swt.widgets.Synchronizer.runAsyncMessages(Synchronizer.java:98)
    at org.eclipse.swt.widgets.Display.runAsyncMessages(Display.java:1999)
    at org.eclipse.swt.widgets.Display.readAndDispatch(Display.java:1733)
    at org.eclipse.ui.internal.Workbench.runEventLoop(Workbench.java:1402)
    at org.eclipse.ui.internal.Workbench.run(Workbench.java:1385)
    at com.tssap.util.startup.WBLauncher.run(WBLauncher.java:79)
    at org.eclipse.core.internal.boot.InternalBootLoader.run(InternalBootLoader.java:858)
    at org.eclipse.core.boot.BootLoader.run(BootLoader.java:461)
    at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
    at sun.reflect.NativeMethodAccessorImpl.invoke(Unknown Source)
    at sun.reflect.DelegatingMethodAccessorImpl.invoke(Unknown Source)
    at java.lang.reflect.Method.invoke(Unknown Source)
    at com.sap.ide.eclipse.startup.Main.basicRun(Main.java:291)
    at com.sap.ide.eclipse.startup.Main.run(Main.java:789)
    at com.sap.ide.eclipse.startup.Main.main(Main.java:607)

    Maybe some plugins are missing. Try reinstall the latest version of the nwds that matches to you server version.
    http://wiki.scn.sap.com/wiki/display/Java/NWDS+Download+Links

  • Hi, Thunderbird just done an update on my computer but now in e mails iv`e lost all my folders I had, For example I had a folder for my receits and other thing

    Thunderbird just done an update on my computer but now in e mails iv`e lost all my folders I had, For example I had a folder for my receits and other e mails I wanted to keep.

    can you provide a bit more info before you do anything.
    I'm presuming this is a pop mail account - please confirm.
    First, make sure hidden files and folders are visible:
    The AppData folder is folder is a hidden folder; to show hidden folders, open a Windows Explorer window and choose "Organize → Folder and Search Options → Folder Options → View (tab) → Show hidden files and folders".
    * Help > Troubleshooting Information
    * click on 'show folder' button
    * click on 'Mail' folder.
    * Please post image of the contents of the 'Mail' folder.
    In thunderbird:
    * right click on mail account name and select 'Settings'
    * Select 'Server Settings' for the mail account
    * Look bottom right for 'Local directory'.
    * Put mouse cursor in the text box, then use keyboard arrow keys to navigate to the far right..some of the directory will be hidden as it does not fit it all in, so keep going to the right until you reach the end.
    * Then left click, hold down and move mouse to the left to highlight the entire entry.
    * Right click on highlighted area and select Copy.
    * Paste info into this question in the forum.

  • Setup and configuration for system monitoring and IT Reporting for Java sys

    Hi all,
    How to setup and configuration for system monitoring and IT Reporting for Java system ?
    How to connect Java system to Solman system?
    Regards,
    Neni

    HI,
    What is your OS? You can use SAPCCMSR.exe to monitoring  IT Reporting Java system on Solman.
    Go to solman rz21 create a csmreg user. and configuration fil for agent. copy configuration fil on usr/sap/ccms/..
    Go to comman line cd ../user/sap/xxx/sys/exe/.../ wite SAPCCMSR.00 -R pf=< ...../sys/profile/instans profile> .
    You can se agent on rz10 and use this connaction on rz20 to monitoring and IT Reporting Java system on Solman.
    I hope this help

  • Getting processing log for our custom output triggering FM?

    Hello,
    VA02 > Extras>Header>Output>Edit --- Triggering an custom IDOC
    Stadnard SAP output programs shows IDOC number on output processing log. But, our custom programs/FMs the one we use to trigger on order IDOC, don't show the processing log. How to get this processing log for custom FMs just like standard SAP?
    Thank you

    Hello
    I am sending my custom IDOC by using FM  'MASTER_IDOC_DISTRIBUTE', if it went well (sending successfully - status is '03') in next step am using PERFORM FILL_NAST_PROTOCOL(ROIKCALE) routine.
    But, when i checked the PROCESSING LOG of the associated green latest item in VA02/03>Extras>OP>Header>Edit....am getting a message that "No processing log exists"
    How to get/see my IDOC #?
    when i saw the F1, it says, "System logging has been de-activated for the selected output type (use settings in Customizing for current application for the selected output type)"
    When i checked the settings in NACE (and then clicking lense), they are fine.
    Am i seeing correctly to get/know the generated IDOC #?
    Thank you

Maybe you are looking for