Customizing Self Service HR Page

Hi all,
I want to add validation to one of the fields on the personal information page in self service HR.
I tried to look for the page in about this page and got the page in my local PC.
When I try to run it, it says page is not runnable as AM required Definition is set to yes.
I want to know how to run the page from my local machine and how can i proceed with my customization of adding validation on a field in the same page.
How do we customize the AKRegions?
Thanks

Hi,
If I cannot use PPR on the address field(DFF) then may be i can do the validation in AM or Controller.
However I would definitely like to know the process of customizing a AKRegion.
What I mean to say is.
If it is a plain OA page then I can get the PG or RN from MDS and the respective java files also from java_top.
but how will i know which page or region i need to customize if it is a AKRegion.
OA.jsp?akRegionCode=HR_CREATE_PROCESS_TOP_SS&akRegionApplicationId=800&OAFunc=HR_PERINFO_SS
what is an akRegioncode is it something similar like an OAF page?
Where Can I find some documentation to read on AkRegions.
Please Help
Thanks.

Similar Messages

Customer self service form gives the error of "Page cannot be displayed"

Hi All,
Customer self service form from Navigation: Recievables -> Customers --> Standard gives the error of "Page cannot be displayed" but the same form gets opened when i navigate that from Order Management responsibility
Thanks&Regards,
APPS DBA

Hi All,
I have been trying to install the EBS 11i in configured system core 2 duo with 1 gb ram and 250 gb HDD,
have been following the below steps to install the EBS 11i,
1.installed Win20003 server edition
2.VC++ and copyind the link file into windows\system32,
3.GNU make done the path set everything,
4.MKS tool kit,
5IP config and installing MS loopback,
started the installtion direct from the DVDs,
Pre-Installtion everything was OK,
but after done everything I got struck last min, where the popup window appeared as login page responding but i did wait for 30 min and nothing has happened.
So closed and I restarted the System and I have restarted process putting 1st DVD and given the command rapidwiz -restart.from command prompt.
and Again its started as a new installtion, and preinstatltion wizard has came.
where I haeve commited the mistake i did not understand...?
Please guide me
regards
Satya

Custom Self-Service Request

Hi All,
I have created a custom Self-Service Request i.e. "CASH ADVANCE" using EIT.Done all the setup in
HR & AME(Approvals upto 2 positions up.What i have done the setup:
1) Created an EIT for CASH ADVANCE
2) Created a function for CASH ADVANCE
3) Added the Function to the Self-Service Menu
4) Run "Register Extra Information Types" for "CASH ADVANCE"
5) Ceated a Condition in AME using existing Attibute
6) Created a Rule also in AME
7) Enabled profile options for Personalization
8) Profile options for BG, Security Profile & Usertype are set
Yet to be done:
1) Need to enable DFF segments in Self-service page using Personalization for CASH ADVANCE segments
After enabling profile options for Personalization, when i selected the Request..
It is showing Error as shown below:
Error:
The selected action is not available. The cause may be related to security.
Contact your system administrator to verify your permission level for this action.
Pl guide me where i have to check? I appreciate inputs from anyone.
Thanks.
Regards,
Siva

hi Siva,
Please add the Function you have created for 'CASH ADVANCE' to following menus also:
1. Personal Actions Menu
2. Manager Actions Menu
3. Global Self Service Functions Custom
The prompt in 1 and 2 should be same as you have given in the Menu through which you are accessing this function.
Regards,
Manuj

Customer Self Service via SAP Internet Sales

This is my first time posting on the SDN, so please forgive my ignorance if this is in the wrong place. We at Bentley have taken on the massive task of implementing a customer self service solution replacing our Siebel installation. We are still mapping out how things will work and how it will be architected, but wanted to know if anyone in the community has any white papers on how the security architecture is supposed to look. Here is our challenges:
1. Utilizing multiple info sources including BW (for reporting), CRM (for customer information and sales placement), R/3 (for invoice queries), and many .NET applications.
2. Supporting over 300k contacts each with a desire to maintain their own user base.
3. Currently utilizing the portal.
Again, we are trying to integrate all above to provide a solid solution for our customers. SAP Internet Sales looks like a viable option, but that obviously would require a user master record in each SAP system (300k in each?) to support the hierarchy above for reporting, queries, and data entry.
Has anyone else in the community successfully implemented a similiar solution, and if so.. Would you be willing to share some ideas with us?
Many Kind Regards,
Wayne Miller
Business Applications Security Officer
Bentley Systems, Inc.

Thanks!
Looking at your profile, I assume you may be able to help. I have Portal connected to my ECC system. We have loaded the latest UCES on the portal and configured XCM. Restarted the J2EE system. Everything seems to be ok, as I can do the connection tests from Portal (JCO) and ECC (RFC).
When i launch the page - http://portal.com:50000/bdisu - i get the following error -
A general problem has occurred within the logon. The error message is: .
I dont know how to fix it. I created a message with SAP and they said some config need to be done on the backend, while the functional guys are not aware of any. Can you please guide me to fix this error?

How to call an Oracle Report from a Self Service HR page.

Hi,
I am trying to call an Oracle Report from a Self Service HR page. I personalized the page to add a button and link the report's URL to that button; but I am having issues passing/manipulating parameters to this report.
Is there a better approach to do this, please post your suggestions. Also If you can direct me to some usefull documentation that will be great.
Any help will be greatly appreciated.
Regards
Hilal

Tapash,
Thanks for reponding.
Here is the URL I am currently using :
https://gccss.glendale.edu:8001/dev60cgi/rwcgi60?server=rep60_crp3+userid=apps/pswd@crp3+report=/u07/oracle/crp3appl/gcccus/11.5.0/reports/US/GCC_ACCRUAL_BAL_0505.rdf+desformat=html+paramform=yes+destype=cache+p_accesscode=""
The p_accesscode is the parameter I need to pass to the Oracle report.
Currently, when I click the button, it invokes the above URL and takes me to the parameter form of the Oracle report and when I enter the Username, it runs the report and displays the desired output. But, what I need to achieve is, to pass the current user who has logged in behind the scene and to get rid of the parameter screen totally. Is this doable ? If yes, please help me !!!
Thanks
Hilal

Portal Employee Self Services OverView Page

Hi All,
Iam having Four work items in my Employe Self Services OverView Page 1)personal information
2)employee search 3)Benfits and payments 4)Working Time . Now I have added one more work item Travel Management i have done all necessary configuration settings in R/3
spro>employee self services->home page for self services->areas->Difine ares to area grop pages->Assign Areas to Area Group Pages (Add and Change Entries)->here i have given 5 position
but there is no change in Frontend portal employee services overview page
Can anybody help me in solve out this.
Thanks in advance,
Kishore
Edited by: kishore shikore on Nov 29, 2008 6:13 AM

hi, hav u created webdynpro iView..
Suppose you want a new area which has two servicex.. create WD iView which would point to your application.
Define Applicationparameter in iView defining menuarea, menugroup, menuheader, which you will be defining in SPRO.
Now create weddynpro proxy page and the add above iView to your page.
Now create iView for service i.e your webdynpro appliaction.
Now add above iView to new proxy page. Thus now we have to proxy page.
Create workset and add this two page to workset.
Add this workset to ESS role.
note down PCD location of above two pages.Now all necessary configuation from portal side is completed
Now u would need to do your SPRO setting.. Go to resource node and create resouce. and give PCD location in URL of PCD Page. Similarly you would need to do this for other page also ...in resouce node.
Now we have defined resouce...now we would define the area...give your area name..and give resouce name.
Now define subarea.. and add subarea to areas..from assing sub-area to area node.
Now create a service..from define service node..give resouce name in link resouce text box..
Now assign service to subarea..
Now to make it available on overview page....you need to add Group page to Group Area page, to make it visible on ESS Overview Page.
IMG-> Cross Application Components -> Homepage Framework->Areas -> Assign Areas to Area Group
Pages -> Assign Areas to Area Group Pages (Add and change Entries).
Click on u2018New Entriesu2019.
Now you can save..it..
Regards
Jigar oza

Self Service Salary Page

I need to display per_pay_proposals.attribute2 in employee self service salary page. May I know how to display.
I clicked Personalize "Salary" page and clicked expand all to check the attribute2. But I couldn't find. Can any one
advice. Is there any other alternative?

Hi Naveen,
Can you please let me know about AK regions. What I did was I enabled personalization using profile option "Personalize Self-Service Defn" and on salary page I clicked personalize "Salary" region. Then I clicked "expand all" option for attribute2 column to make render as true, so that I can display it in the self service salary page. But I couldn't find this attribute2. Any idea?

Custom self-service DC that utilizes floor plan manager DCs

I am developing a custom self-service DC that utilizes floor plan manager DCs. What is the best way for me to get the following DCs into my Local Development directory?
pcui_gp/xssfpm
pcui_gp/xssutils
ess/per
I want to build them locally before messing around with our DTR, track, etc.

Hi,
You need to sign up to get more information on Floor plan manager to OKP
Below are some of the direct links which are not free. You need to sign up.
https://websmp103.sap-ag.de/~sapidp/011000358700004848442004E.pdf
http://service.sap.com/okp
Hope it will help you.
Raghu

OIM 11g UDF of UI type Lookup not reflected in Self Service Profile Page

I created one UDF of type lookup in admin console. published the sandbox. Then I logged in self service console and created a new sandbox. I wanted to make udf visible in self service page so I started customizing the create user page. But the newly created udf is not visible under userVO.
Steps to re-produce the issue:
1. create a new sandbox in admin console. create a new udf of type lookup. publish the sandbox.
2. login to self service console. create a new sandbox and start customizing. go to create user page. click on customize. select source and select the panel to add the udf. select data component catalog, select userVO. Under this userVO, my newly created UDF is not visible.I cant find my new lookup type udf. I can see the udf created in usr table in DB.
Please let me know if anybody have faced similar issue and its resolution.
Thanks,
Kalpana.

can you check whether remaining custom UDFs are appearing?
Is it a problem just with Lookup UDF type?
Also, this sandboxes are very error prone. So you need to make sure only 1 person is working during 1 specific work with sandbox

SelfService Home Page

Hi All,
Basic WF Question
How can I reach the Self-Service homepage?
I have OraDB 10g, WF 2.6.3 Server, Midtier and Client + the HTTP Server installed on the same XP machine.
In the admin guide, it is referred to the Workflow Administrator Web Applications. I cannot seem to find this anywhere. What steps need to be taken?
Thank you

Hi Hari,
Basically there are 2 parts:
1) Customizing in the backend (IMG) > Homepage Framework (http://help.sap.com/saphelp_erp2005vp/helpdata/en/aa/9f75620a8d4a2e9181db37f2fa2a62/frameset.htm)
2) Define the worksets, pages and iviews in the portal (copy them
This homepage framework is called Self Service Homepage (or XSS Homepage Framework).
Cheers,
Noë

Which is better in custom self service function SIT or EIT??

Hi Guru,
I have requirements of loan request to be through self service,the end of the approval cycle i will use user hook to create loan element entry for the employee.
I want to know which is better to be used for this function SIT or EIT ?? which is better in validations on submit page level.
Regards

Hello,
Below thread may provide more informations on difference between SIT and EIT.
Basis of choosing EIT, SIT and Addition Information DFF
Regards,
Saurabh

OID Self Service Console - Page Cannot Found error

Hi,
I am using Oracle Collaboration Suite and facing problem while creating a user. I navigated to the OID Self Service Console and signed in successfully with orcladmin user. After successfull login as I click on Directory Tab to create user then Page Cannot be displayed typical browsing error appears. I cannot find whats wrong. Infrastructrue and middle tier components all are up and seem working fine.
I cannot find way to deal with Page Cannot Found error. Please help
Regards,
Sami

Try typing in the URL yourself in the address location. Do you observe the same behavior?
If the forward-slash at the end still makes a difference, then verify that you have not modified your httpd.conf on the infrastructure instance.
Here, check if your HTTP Server had any redirection rules or any aliases setup in the httpd.conf in your infrastructure. The trailing forward-slash / is generally meaningful in those places.
Also note if you see the same problem with other targets too. for instances, sso-login server.
AMN

Modify Self Service -- Profile page

Hello Experts,
I need to modify the Profile page under Self Service ..the attributes tab to be specific..I would really appreciate some guidance.
Thank you

I figured this one out...created an authorization policy allowing user to view and modify and added the attribute to the modifyuserdataset.xml..
Thank you

Guest Server - Self-Service login page

Hi
Has anyone managed to customise the spash page users see when they login ?
We are trying things like stopping the "access plan" from displaying and the phone country code to default to 44 and not +1.
Any guidance would be appreciated.
Thanks

Louise, I'm not quite following the second part of your question.
Customizing the splash page is a fairly simple process and there are examples available on CCO. Assuming you are using a WLC there is a webauth bundle that is located on the WLC download section, inside this bundle there are various options for page layouts as well as an instruction file letting you know how to use them. The main thing to remember is that the file size is limited of the tar file that you create and you need to use 7zip for example on Windows to create proper bundle.
ISE also has the ability to host the captive portal as well and there should be an example of that floating around on CCO as well I think. The same concept applies, you modify the HTML pages to your liking, tar them up, and then upload to your ISE box.

Extending self service hr pages

Are there any resources where I could see demos or examples on how to customize sshr pages via jdeveloper?

I'd try the OA Framework Forum: OA Framework
Note to the Oracle Guys: Maybe you should put a sticky at the top of this forum, as we get a lot of OA Framework questions here (it does use JDeveloper, after all, albeit an ancient version).
John

Customizing Self Service HR Page

Similar Messages

Maybe you are looking for