Customizing Text to Speech pronunciation in Captivate 7?

Hi,
I'm trying to customize the dictionary pronunciation of the Captivate 7  NeoSpeech Julie voice.
I wanted her to say E Procurement instead of EProcurement.
I tried following the steps in this post, though the instructions were for Captivate 4 and I get a message saying I don't have a license for UserDicEng.exe
http://blogs.adobe.com/captivate/2009/03/customizing_text_to_speech_pro.html
Any ideas for how I can customize the pronunciation for words?
Thanks,
Dan

Hi there,
If you have downloaded the voices for Captivate 7, then it has downloaded the zipped file for Text to speech installer.
You need to extract that zipped file to a folder first, then inside that folder there is setup.exe file, double click on setup.exe to start the installation. (Captivate should be closed while installing voices)
Note: The set up of text to speech  are different for Captivate 7 32 bit and Captivate 7 64 bit, so make sure that you have downloaded the appropriate one.
Thanks.

Similar Messages

  • Where can I get the Text to Speech utility for Captivate 4?

    I looked all over the Adobe site. Where can I find the text to Speech utility for Captivate 4 and the voices that go with it. A URL to the download site would be perfect.

    It has been discuss a few posts down to your recently, as indicated correctly by Micheal.
    http://forums.adobe.com/thread/944601?tstart=0
    Thanks,
    Anjaneai

  • Text - To - Speech.. Captivate 6

      Hello,
        Is there an easier way to install the new voices for Adobe Captvate 6?   I have installed Neo Speech invoices on my computer like Captivate instructed, but my Adobe Application Manager is somehow broken and won't install the voices to Captivate.  I have tried to download and re-install Adobe Application Manger, but that hasn't work -- I still get the same error message.   Any help would be appreciated!
       Ryan

    Hi Priyank,
      Thanks for getting back to me.  Unfortunately, the error is in German.
      It basically just says : Adobe Application Manager could possibly be damaged.  Please download and install a new copy.
      If problems continue to arise, contact support for help. (I attached the error message below.)
    The problem is that my copy of Adobe Application Manager is fine.  I just downloaded Adobe After Effects with it.
    cid:[email protected]
    Von: Priyank Srivastava [email protected]
    Gesendet: Montag, 27. August 2012 15:08
    An: Scharfer, Ryan
    Betreff: Text - To - Speech.. Captivate 6
    Re: Text - To - Speech.. Captivate 6
    created by Priyank Srivastava<http://forums.adobe.com/people/Priyank+Srivastava> in Adobe Captivate - View the full discussion<http://forums.adobe.com/message/4650809#4650809

  • How do I install the text to speech voices in Captivate 7 trial

    I am on day 2 of the 30-day trial.  I downloaded the voice zip files, but can't seem to get them recognized/installed in the trial version.  How do I do this?
    Thanks.

    Hi there,
    If you have downloaded the voices for Captivate 7, then it has downloaded the zipped file for Text to speech installer.
    You need to extract that zipped file to a folder first, then inside that folder there is setup.exe file, double click on setup.exe to start the installation. (Captivate should be closed while installing voices)
    Note: The set up of text to speech  are different for Captivate 7 32 bit and Captivate 7 64 bit, so make sure that you have downloaded the appropriate one.
    Thanks.

  • Where can I download text to speech for adobe captivate 7?

    I have recetly downloaded captivate 7, but need to find the right file to allow mw to create slides with a text to speech function.

    Click Audio, then click Speech Management.  On the bottom left of the window there should be a link to download the files.  Hope this helps. 

  • Text-To-Speech Recording in Captivate 5

    I am using Captivate 5, when I use the TTS and even though I select Paul, I always get Heather's voice. How can I change this? I have tried closing and reopening the software, starting at slide 1 and selecting Paul first but it still records using Heaher's voice. Can anyone assist me with this one?

    Hi there,
    When you want to change the speech agent, make sure you select the row which displays the speech agent's name by clicking on it and then choose the required speech agent from the dropdown. After this, the selected agent's name will be shown in that row.
    Let me know if you followed the same steps and still have the issue.
    Thanks,
    Sagarika

  • Text-to-Speech Download - Captivate 4

    Hi all, I'm currently using a volume license registered version of Captivate 4. Would like to utilize text-to-speech feature, but whenever I try to enable, a download window pops up, I click it, and it directs me to a "buy captivate 5" webpage. Can anyone provide me with a working URL to download the text-to-speech files for Captivate 4? Also would like instructions on how to proceed after download. Thanks!

    Hi all
    See if the thread linked below helps.
    Click here to view
    Cheers... Rick
    Helpful and Handy Links
    Captivate Wish Form/Bug Reporting Form
    Adobe Certified Captivate Training
    SorcererStone Blog
    Captivate eBooks

  • Text to Speech Dictionary Editing

    Hey everybody.  I'm confused and could stand some help from my fellow Captivators.  I'm trying to edit the user dictionary in the text to speech feature of Captivate 4.  I saw the blog post at http://blogs.adobe.com/captivate/2009/03/customizing_text_to_speech_pro.html.  I find that the path specified in the post for the dictionary does not exist on my machine, but there are two parallel paths, one for Kate and one for Paul at C:\Program Files\Adobe\Adobe Captivate 4\VT\Kate\M16\data-common\userdict and C:\Program Files\Adobe\Adobe Captivate 4\VT\Paul\M16\data-common\userdict.  In playing with this, it appears to me that Paul uses Kate's userdict_eng.csv.  But he has his own dictionary in the above path.  If I edit the dictionary in Paul's path, then re-launch Captivate, none of the pronunciation changes take place.  But if I edit Kate's dictionary, then re-launch Captivate, the new pronunciation is spoken by both Kate and Paul.  ????
    Am I seeing the right thing here?  If so, it would appear that I should always edit Kate's dictionary and ignore Paul's???  Or am I completely off the mark?
    Thanks.

    Hi there
    Is is possible that after you edited Kate's dictionary you performed another action that caused both to be read in? You might try this by further editing Paul's and seeing if the changes take effect or if it only happens after you also edit Kate's.
    Just thinking out loud... Rick
    Helpful and Handy Links
    Captivate Wish Form/Bug Reporting Form
    Adobe Certified Captivate Training
    SorcerStone Blog
    Captivate eBooks

  • Automated Text to Speech Bit Rate

    I've built an automator script that converts text to speech. It does so in mono with a bit rate of 22.050KHz and at 8 bit. This is exactly half the rate Garage Band needs to help me turn this into a little podcast. Does anyone know of a way to convert this data or better yet to record it from the start at 44.1KHz/16 bit?

    Hi Varun,
    Thanks for the prompt reply.
    I am using Captivate 6.0.1.240. I was getting the error in any slide in which I tried to convert some text to speech using 64Bit Captivate.
    I just created a new project and tried to convert some text to speech. This caused my machine to freeze and I had to do a cold reboot!
    When I tried to do it again, in the new project, after my machine had restarted, I got the below error message.
    Thanks

  • Text to speech missing in adobe captivate 7

    Text to speech  and closed caption button missing in adobe captivate 7.
    Please see below.
    May I know what happen?

    Re Lilybiri,
    I cannot find the Text to speech  and closed caption button next to the filter. I don't know why. But I can see it before. Now I would like to change the voice of below caption, what can I do?

  • Adobe Captivate 6 Spanish text to speech

    Hi we are using Adobe Captivate 6.  We were wondering if there is an option to get text to speech in Spanish language.  We are currently using NeoSpeech which provides German, French and English (couple of accents).
    Are there any alternatives to this?

    Hello,
    Welcome to Adobe Forums.
    Spanish Text to Speech is not available as an add-on for Adobe Captivate.
    You can purchase Spanish Voice from NeoSpeech.com and Loquendo.com.
    Thanks,
    Vikram

  • Captivate 4 text to speech function

    I just downloaded the trial version for Captivate 4. I
    specifically wanted to see the new text to speech function that
    they have added to it. When I downloaded it and tried to use it, I
    received an error message that stated "Unable to decode and import
    the selected wav/mp3 file". Is anyone familiar with this?

    This did work and my Captivate is working great!
    Thank you!
    JPCaptivate <[email protected]> wrote:
    Hi,
    Please update your Captivate 4 application by installing the latest patch available. To install patch, launch Captivate and follow menu items "Help > Update". Captivate 4 patch update will be recognized and installed on your system.
    Once patch is installed, try to record the same scenario. Do let us know if the recording succeeds for you.
    Thanks
    Jayashree
    http://blogs.adobe.com/captivate
    >

  • Link to download Text to Speech for Captivate 4

    I have Captivate 4 and would like to download Text to speech but I can't find the link on the website.
    Could someone help me figure this out?
    Thank you,
    Celine

    Hi all
    See if the thread linked below helps.
    Click here to view
    Cheers... Rick
    Helpful and Handy Links
    Captivate Wish Form/Bug Reporting Form
    Adobe Certified Captivate Training
    SorcererStone Blog
    Captivate eBooks

  • Captivate 8 keeps crashing when generating Text to Speech

    Captivate 8 keeps crashing when I try to generate audio for text to speech. Captivate generates a backup file but I can't get my backup file to open, it says that the file is corrupt or already open.
    Has anyone else encountered this problem?
    Thanks.

    Hi  There , 
    Is  your  Captivate  8  updated ?
    Is  that  issue  occurs  with  a  specific  project ?  Please  test  with  a  new  /  blank  project  and  try  to  generate  audio  for  text  to  speech . 
    Regards , 
    Ajit 

  • Please provide link to download Adobe Captivate 5.5 Text-to-Speech

    Adobe Captivate 5 text-to-speech converters download link url?

    Your user account --> My Products or this: http://prodesigntools.com/tag/ddl
    Mylenium

Maybe you are looking for

  • How to view ALL batch job details (SM37) at one glance ?

    Dear all, I am documenting all released batch job details, the information required includes the job name, client number, job frequency .. etc. In order to see that information, i go to SM37 and click on each job to see the details. I have about 60 j

  • Shopping cart header status differs to status at line item level

    Hello I am using SRM 5.5 EC, got a situation where there is a single line shopping cart which has been approved. The status on the header is still showing "awaiting approval" but at line item level it shows as being "approved" and no follow on docume

  • Formula that looks at two different fields

    Hi, I posted this request for help not too long ago but didn't clearly explain what is needed.  When text is entered into a field (currentgoal1, currentgoal2 - each equaling 1), the formula needs to look at a different field (point1, point 2 - each h

  • Determining the Extent (Projected Bounds) of an SRID

    Hi All, I'd like to determine the extent (Projected Bounds) of an SRID (in its own Coordinate System). Is this possible using any Spatial functions or will I have to parse the WKTEXT and perform some operations ? This is as an alternative to a previo

  • OutOfMemory error in Weblogic jvm even when enough heap is still available

    Hi Everyone, We get a strange OutOfMemory error that happens only once in our Weblogic server in production environment.The Server immediately recovers and there is no issue as far as the application functionality is concerned. This is the exact erro