Customizing the Performance Point Services (Dynamic report view) in Sharepoint 2010

Hi Guys,
My requirement is to place the OLAP grid bar which is present in Dynamicreportview.aspx, in the PPS dashboard page in sharepoint 2010.
How to achieve this in sharepoint?
Please suggest any workarounds ?
Thanks in Advance.
Thanks & Regards
Anil Kumar K

Please refer to below link for Unsupported features with Excel service in SharePoint:
http://msdn.microsoft.com/en-us/library/office/ms496823(v=office.12).aspx
Please ensure that you mark a question as Answered once you receive a satisfactory response.

Similar Messages

Performance Point Services vs Reporting Services

I am using Reporting Service in SharePoint 2013 Enterprise Version.Now i have to create a POC for Performance Point Service.I want to know in which scenerios i can use Performance Point Service instead of reporting service,Please suggest me the article which
differentiate between both the servies

In short, SSRS is great for drill-down (matrix) reports and free-form reports, PPS is great for building dashboards, KPIs and predictive reports. Also see:
http://www.mssqltips.com/sqlservertip/2737/sql-server-reporting-services-vs-performancepoint-services/
http://businessintelligist.com/2012/04/02/comparing-performancepoint-powerview-excel-services-and-reporting-services/
Kind regards,
Margriet Bruggeman
Lois & Clark IT Services
web site: http://www.loisandclark.eu
blog: http://www.sharepointdragons.com

Performance Point - need to limit permissions to Sharepoint lists

I set up Performance Point Dashboard Designer.
And as per Microsoft's instructions, I set up an Unattended Service Account for the Performance Point Service Application.
And I gave this account read permissions under the Web Application's "User Policy".
However, this gives a user access to see all sharepoint lists when they're creating a data source.
When a user is creating a data source in Dashboard Designer, I want to limit their permissions to SharePoint lists to only what they normally have access to on the SharePoint sites.
How can I configure Performance Point service application another way , instead of using an unattended service account?
Please help!
thanks!
Also want to mention that I have Business Intelligence Centre set up as a Site Collection, and I only gave this user "Contribute" permissions, but it still gives them access to see everything in SharePoint sites when they create a data source,
which shouldn't be!!
How can I get it to reflect the same permissions that the user has in SharePoint? They shouldn't see Lists that they don't have access to.

Does anyone know how to limit permissions for Dashboard Designer??
any help would be greatly appreciated!!!

Performance point service errors in share point wfe servers event viewer

HI
i am facing a problem in performance point service , i seen two errors in event viewer of a sharepoint wfe server
An exception occurred while the width of the Web. Diagnostic information that may help determine the cause of the following in this issue:
Microsoft.PerformancePoint.Scorecards.BpmException: There is a problem in the preparation of a Web Part for display.
Error code "Services PerformancePoint" is 20700.
2 error)
Log Name:      Application
Source:        Microsoft-SharePoint Products-PerformancePoint Service
Date:          02/09/35 01:11:41 م
Event ID:      39
Task Category: PerformancePoint Services
Level:         Error
Keywords:
User:          NT AUTHORITY\IUSR
Computer:      XYZWFE02.XYZportal.com
Description:
A PerformancePoint service application call was aborted by the caller. This may indicate the HttpRuntime executionTimeout for the Web Application is configured to
a value smaller than the DataSourceQueryTimeout for the PerformancePoint Service Application.
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
    <Provider Name="Microsoft-SharePoint Products-PerformancePoint Service" Guid="{A7CD5295-CBBA-4DCA-8B67-D5BE061B6FAE}" />
    <EventID>39</EventID>
    <Version>14</Version>
    <Level>2</Level>
    <Task>1</Task>
    <Opcode>0</Opcode>
    <Keywords>0x4000000000000000</Keywords>
    <TimeCreated SystemTime="2014-06-29T10:11:41.385108100Z" />
    <EventRecordID>1422377</EventRecordID>
    <Correlation ActivityID="{D707EAF7-6A6A-45FA-AF83-77DC3231B658}" />
    <Execution ProcessID="18236" ThreadID="19172" />
    <Channel>Application</Channel>
    <Computer>XYZWFE02.XYZportal.com</Computer>
    <Security UserID="S-1-5-17" />
</System>
<EventData>
</EventData>
</Event>
adil

Hi
also below error is coming in eventy viewer of wfe servers
Log Name:      Application
Source:        Microsoft-SharePoint Products-PerformancePoint Service
Date:          03/09/35 02:25:26
م
Event ID:      39
Task Category: PerformancePoint Services
Level:         Error
Keywords:
User:          NT AUTHORITY\IUSR
Computer:      XYZWFE02.XYZportal.com
Description:
A PerformancePoint service application call was aborted by the caller. This may indicate the HttpRuntime executionTimeout for the Web Application is configured to a value smaller than the DataSourceQueryTimeout for the PerformancePoint Service Application.
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
    <Provider Name="Microsoft-SharePoint Products-PerformancePoint Service" Guid="{A7CD5295-CBBA-4DCA-8B67-D5BE061B6FAE}" />
    <EventID>39</EventID>
    <Version>14</Version>
    <Level>2</Level>
    <Task>1</Task>
    <Opcode>0</Opcode>
    <Keywords>0x4000000000000000</Keywords>
    <TimeCreated SystemTime="2014-06-30T11:25:26.997772700Z" />
    <EventRecordID>1425270</EventRecordID>
    <Correlation ActivityID="{EB0C99EA-5B6A-4001-9D9B-C91FF779CD4B}" />
    <Execution ProcessID="6736" ThreadID="15788" />
    <Channel>Application</Channel>
    <Computer>XYZWFE02.XYZportal.com</Computer>
    <Security UserID="S-1-5-17" />
</System>
<EventData>
</EventData>
</Event>
adil

Double-clicking on a Analytic chart element to drill down to the next level Performance Point Service

Hi,
How to Drill Down the Analytic Chart on Double Click on the chart bar in SharePoint Performance Point Service.
Double-clicking on a Analytic chart element to drill down to the next level Performance Point Service.
I have connected with Cube. I am working in SharePoint 2010.
Thanks & Regards
Poomani Sankaran

It has to do with the order you enter the fields in the Business Model from Physical model! It must be the opposite way than the one you want them to be show. In your case, you must first delete both fields from your business model, then drag tham in with first the "name" field and then the "code" field.
It did work for me!

Performance Point Services Data Source Sql Server Table.

Hi,
I have a requirement where I need to create a matrix report which shows resource capacity and deomand fromProject Server 2010 databases which involves joining of multiple tables and views from the database.
But in Performance Point Service 2010 I am not able to write query to join multiple tables it'sjust showing one option in Data Connection to create connection to a database and specific one table not like SSRS where we can connect to database and can query
multiple tables and views to render the report as required.
So can any body suggest in case I am missing something in PPS 2010 or we cant joing or write sql query in PPS 2010
Thanks

I would join the tables in a view as Regis suggested or simply pull the information into a PowerPivot model and use that in SharePoint to connect to in PPS. If you go that route then you will be able to use a multidimensional source and can create
Analytical Reports.
http://denglishbi.wordpress.com/2011/01/03/using-powerpivot-with-performancepoint-services-pps-2010/
http://denglishbi.wordpress.com/2012/02/09/using-performancepoint-services-pps-with-powerpivot-sql-server-2012-rc0/

Sharepoint 2013 BI solutions using Performance point services is can be compatible with Analysis server 2008 R2?

HI
In Sharepoint 2013 BI solutions using Performance point services is can be compatible with Analysis server 2008 R2?
here in sp 2013 i upgraded sp 2010 BI site and when i open dashboard pages they not display the pointers.
and when i open dashboard designer i was unable to connect Analysis server 2008 R2 where data source exists
adil

Hi
1) here i migrated a Publishing web applications and bi sites to 2013 sucessfully, this site is enable anonymous access
2) Installed SQLSERVER2008_ASADOMD10
3) added performance point service application pool account as a db_owner and data read access permission to content database and added permission to unattended service account to SSAS server .
3) and after i was able to connect to SSAS data soruces.
here when i open dashboards with administrator user , this user able to view dashboards
but when external user able to view dashboards it asking authentication and throws error.
Log Name: Application
Source: Microsoft-SharePoint Products-PerformancePoint Service
Date: 3/15/2015 11:59:02 AM
Event ID: 1101
Task Category: PerformancePoint Services
Level: Error
Keywords:
User: NT AUTHORITY\IUSR
Computer: TSharepint2013.test.com
Description:
An exception occurred while rendering a Web control. The following diagnostic information might help to determine the cause of this
problem:
Microsoft.PerformancePoint.Scorecards.BpmException:
The scorecard no longer exists or you do not have permission to view it.
PerformancePoint Services error code 20700.
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="Microsoft-SharePoint Products-PerformancePoint Service" Guid="{A7CD5295-CBBA-4DCA-8B67-D5BE061B6FAE}" />
<EventID>1101</EventID>
<Version>15</Version>
<Level>2</Level>
<Task>1</Task>
<Opcode>0</Opcode>
<Keywords>0x4000000000000000</Keywords>
<TimeCreated SystemTime="2015-03-15T08:59:02.151586300Z" />
<EventRecordID>149327</EventRecordID>
<Correlation ActivityID="{54EDF29C-9842-C025-E404-2869814A5DF0}" />
<Execution ProcessID="8120" ThreadID="7816" />
<Channel>Application</Channel>
<Computer>TSharepint2013.test.com</Computer>
<Security UserID="S-1-5-17" />
</System>
<EventData>
<Data Name="string1">An exception occurred while rendering a Web control. The following diagnostic information might help to determine the cause of this problem:
Microsoft.PerformancePoint.Scorecards.BpmException:
The scorecard no longer exists or you do not have permission to view it.
PerformancePoint Services error code 20700.</Data>
</EventData>
</Event>
adil

Performance Point Services - Unable to connect to site from Dashboard designer

Recently we moved the Reports site collection from one environment to other. So the Performance point content is also copied.Now I wanted to change the report paths that were deployed using Performance point services. When I try to open the report file from
perforamnce pointcontent list it shows unexpected error. If I am trying to connect to the using Dashboard designer it says URL is not available does not reference Sharepoint Site or you do not have permissions to connect.
Pleasee see the attached file for more details.
How do the reports be fixed when they are to be deployed using Performance point services(Dashboard designer). Unfortunately we do not have the dashboard designer ddwx file with us. Its been developed by vendor and they have not given us.
How should the Dashboard reports(SSRS Report ) be moved from one environment to other.What is the best way to move the performance point dashboards from one environment to other.
Environment- Sharepoint 2010

At both site-collection level and web application level you need to enable SharePoint designer. Did you do that ?
http://blogs.msdn.com/b/mcsnoiwb/archive/2010/07/01/locking-down-sharepoint-designer-2010.aspx
Opening site in SP Designer also needs WebDAV to be enabled on the web front end servers. If the problem still persists, simultaneously open up fiddler and see what's the error message you are getting. That may give you some clue to proceed
Please mark the replies as answers if they help or unmark if not.

Configure Business intelligence site and performance point services

Hi
i created a new Business intelligence site in my web application and after that how i configure performance point service.
and below Configuration is needed?
1-            Configure the secure store service
2-            Create service application
3-            Start PerformancePoint Service
4-            Configure Excel Services and SQL Server Reporting Services integration
adil

Hi,
According to your post, my understanding is that you wanted to configure PerformancePoint Services in SharePoint 2010.
In order to use PerformancePoint Services in Microsoft SharePoint Server 2010, you need to configure a PerformancePoint Services service application. Once you have created the service application, you need to provide data access to the users. This can be done
by using the unattended service account, or by configuring Kerberos delegation.
You can follow the steps as below to configure PerformancePoint Services.
1. Create and configure a PerformancePoint Services service application:
   • Configure the PerformancePoint Services application pool account
   • Start the PerformancePoint service
   • Create a PerformancePoint Services service application
   • Configure service application associations
2. Configure the unattended service account for PerformancePoint Services:
   • Configure the secure store service
   • Configure the unattended service account
   • Grant that account access to your data sources
For more information, you can refer to:
http://technet.microsoft.com/library/ee748643(office.14).aspx
Best Regards,
Linda Li
Linda Li
TechNet Community Support

Performance Point Services data source pointing towards wrong datasource after production instance copied in development

Hi
We have copied our Project Server 2010 production databases to development server. We have few reports created by using Performance Point Services, but here when we try to open the reports the data source is pointing towards production data source
instead of dev.
We are getting some issue while executing the reports
Request you to let me know what exactly the cause and steps to rectify the issue.
Thanks
Geeth If you feel that the answer which i gave you is Helpful please select it as Answer/helpful.

As you have copied data from Prod to Dev reports are pointing to production data sources and reports are unable to display data. Whenever we copy the data from one environment to other then this kind if issue occurs.
We need to modify the data source of all the reports manually so that report point to dev data source.
You have to open data source for your reports and change it from prod to dev then reports will display correct data.
http://blogs.msdn.com/b/performancepoint/archive/2011/09/19/performancepoint-data-connection-libraries-and-content-lists-in-sharepoint.aspx
http://www.networkworld.com/community/node/57687
kirtesh

Performance Point Service Filter Reset on button click?

Hi.
Is it possible to reset the PPS filter on button click (Common "Reset" button).
Is it possible to do by using Javascript?
I need some work around to achieve it.
Thanks & Regards
Poomani Sankaran

Hi,
According to your post, my understanding is that you want to reset Performance Point Service Filter on button click.
You can follow the article
SharePoint Dashboard with Common Filters using PerformancePoint Services 2010 to create a dashboard with common filters using SharePoint PerformacePoint services 2010 and SQL Server Analysis Services (SSAS) Data Source.
Then you will see the filters on top of your dashboard. You can change the filters and see that both the reports are rendering the data as per your filter choice.
If you'd like to default the filter to a particular value on page load, you might want to try a JavaScript based approach:
Define the function 'NotifyBrowserOfAsyncUpdate(elem)', which PPS will call after any PPS render request completes (i.e., when your filter renders).
Within the function, check that elem.control exists and then check that elem.control.webPartTitle equals your filter's title.
If it does, search elem (the filter web part's main container DIV) for the actual filter control and change the value. If you're using a dropdown, this is pretty simple - just remember to call the 'onchange' method on the select as well so that connected
PPS objects refresh.
Here is a similar thread for your reference:
http://sharepoint.stackexchange.com/questions/61939/default-pps-filter-for-pps-dashboard-in-sharepoint-2010-not-showing
Best Regards,
Linda Li
Linda Li
TechNet Community Support

How to enable "SelectAll " in MultiSelect MDX filter in Performance Point Services 2010

Hi,
I have multi select MDX filter in Performance Point Services 2010. I need all the values of the filter to be selected by default. i.e when the page is loaded for the first time, all the values in the multi select filter should be selected.
Is there any property enabled for this? Any other solution can be achieved?
Kindly help.
Regards,
Mani

At least I haven't managed to alter the display value. It uses the member name directly.
The only thing that comes to mind is creating a user hierarchy, so that countries and states can be shown as a tree in the filter.

Performance point services error

We are trying to configure performance point services in our environment.
We have successfully setup the secure store service and after that performance point service but still if we browse the site and start the dashboard designer, we are getting below error:
"an error has occurred attempting to contact the specified sharepoint site dashboard designer"
We have configured our web application with classic mode authentication. Do we need claims based authentication for this?
Thanks in advance.

Hope you followed below steps properly
http://www.dotnetcurry.com/showarticle.aspx?ID=650
Also check if below helps
http://blogs.msdn.com/b/mcsukbi/archive/2011/11/26/bi-service-applications-in-sharepoint-2010-authentication-classic-vs-claims-and-identity-delegation-kerberos-part-5.aspx

Performance point service for SharePoint List

Hi All,
I've a requirement to create Performance Point service to display in the SharePoint List. List contact single line of text columns.
So i would like to know whether there is any possibilities to utilities this
PPS for this SharePoint List. Please suggest.
Thanks in advance!
Arun Prakash

Hi Arun,
Could you please elaborate your demand?
Also you can have a look at the blog for using PerformancePoint Services in SharePoint:
http://www.codeproject.com/Articles/783405/PerformancePoint-Services-in-SharePoint
http://blogs.msdn.com/b/performancepoint/archive/2011/09/19/performancepoint-data-connection-libraries-and-content-lists-in-sharepoint.aspx
Best Regards,
Eric
Eric Tao
TechNet Community Support

Error encountered while signing: The Windows Cryptographic Service Provider reported an error: Access was denied because of a security violation. Error Code: 2148532330

Last night when i tried to sign a document i received the mesage below and after that it says this document can't be signed what can i do to fix this problem.
Error encountered while signing:
The Windows Cryptographic Service Provider reported an error:
Access was denied because of a security violation.
Error Code: 2148532330

I assume you are implying "biztax" application here, right?
I have contacted their program lead, with no result at all.
Past days I have been searching for a solution - reinstalls / new systems - no solution.
This issue appeared a week or two ago only.
I found http://forums.adobe.com/message/5338853 useful - but no positive results either.
http://test.eid.belgium.be/faq/faq_nl.htm obviously didnt help either.
If anyone finds a solution to this issue, please do let me know - any help is appreciated.
Biztax tells to use the "signature", not the "authentication" - but it is only Auth. that is showing up as option to sign (that works)
ps, did you fiddle with the Adobe Reader XI security settings and import that PKI etc as well? I hoped that would be the breaktrough. Sadly i'm still crying in my chair.
Oh, and dont forget: they claim nobody else got this issue. Maybe one or two people. (We got about 8 customers experiencing exactly the same symptoms at the same time )
> I noticed that when I try to open the pdf document that is 'signed' by the government it is not showing the filename in the title bar, but only " - Adobe Reader". every piece of info helps I guess.
Obviously last version of Reader 11.0.03

Customizing the Performance Point Services (Dynamic report view) in Sharepoint 2010

Similar Messages

Maybe you are looking for