Customizing the pushbutton control in 6.1

How do I remove the LED portion of the pushbutton control in LV6.1?
I tried to do a custom control but the LED can not be deleted.
Anyone try to do this before?

An easy way would be to customise the button, select the LED and move to back

Similar Messages

Custom the CWgraph3D Control

Hello,
Curretly I met
another challenge about the CWgraph3D control. I want to show a
background image on a fixed ranges/axes area of the CWgraph3D control
in the XY view (or any of the other two projection, does not matter).
What I mean is, I have my CWgraph3D control set for the XY (2D) view,
and for example, the range of x and y are both 0 - 10 (fixed). I want
to show a back ground image of the control so that when I plot things
on the control, I will see what I plotted + the background image. I
cannot find a way to do it, can anyone give me a hand? Thanks.

Hi,
Here is an example of what I am doing: Say, I have a sphere object sitting in the origin of the 3D Control and I am looking at it from the XY view (see the attached pic01). The X and Y axis is fixed (say, for example, both range from -10 to 10 crossing the sphere). The black line is there as a refernce. The task is to use a blade to cut the sphere along the reference black line. Assume I have a way to detect the movement of the blade so that I can show it in the 3D Control, my problem is how to show the sphere and the black line (which is the pic01 image) so that I know if I am at the right angle to cut my object. If it is complicated to custom the 3D control to show the image, is there a way that I can overlay an image on top of the 3D control and set its transparency to a level that I can see both the image and the plots in the 3D control?
BTW, the object to be cut is more complicated so that I want to just put the image in the 3D control.
Again, thanks all for your helps.
Attachments:
pic01.jpg ‏19 KB
pic02.jpg ‏21 KB
pic03.jpg ‏20 KB

I am using Photoshop CS5 on a new iMac with a wireless keyboard. I used to be able to hit F11 to perform a custom sharpening action but now the F11 key is the volume control key and I have tried everything to disable or switch the volume key. I have also

I am using Photoshop CS5 on a new iMac with a wireless keyboard. I used to be able to hit F11 to perform a custom sharpening action but now the F11 key is the volume control key and I have tried everything to disable or switch the volume key. I have also tried assigning other function keys to initiate the action. Is there a simple solution to this? What am I missing?

Try unmounting the volume on your iMac using Disk Utility. Then mount it again. You may need to reboot the laptop or relaunch its Finder process (using the Force Quit window) after remounting the drive on your iMac. Remember that no process may be accessing any files on the drive you plan to unmount, or the unmount will fail. Unmounting and remounting an external drive on my iMac made it become visible on my MacBook Pro after it had disappeared.

Add columns with custom fields in the table control of MIGO

Hi,
I have to add custom fields in the table control view of item in the MIGO. I have added the fields in the GOITEM structure and i am able to display it in the item details tab. I want the same fields to be visible as columns in the table control view of the items.
I found that TV_GOITEM is the control in SAPLMIGO program referring to the table control of items but it is referring only to the standard fields available in Screen 200.
Please let me know if there is any screen exit or option to add the custom fields in the control TV_GOITEM.
Thanks.

Hi,
Thanks for your reply. I have added the custom fields in the item detail. But the customer wants the custom fields in the table view also.
Is there any screen exit available to modify the table control of MIGO?
Thanks.

How to fetch the Table Control data to Customer Table(Z-Table) ?

How to fetch the Table Control data to Customer Table(Z-Table) ?

Hi Krishna,
Check this sample programs
http://www.planetsap.com/online_pgm_main_page.htm
http://sap.niraj.tripod.com/id29.html
http://www.sapdevelopment.co.uk/dialog/tabcontrol/tc_basic.htm
Have a look at below links. It will help you.
http://help.sap.com/saphelp_nw04/helpdata/en/9f/dbac5135c111d1829f0000e829fbfe/content.htm
http://help.sap.com/saphelp_nw04/helpdata/en/9f/dbac1d35c111d1829f0000e829fbfe/content.htm
Thanks,
Reward If helpful.

To determine the credit control areas for the customer

Hi all,
Two credit control areas will be maintained for a customer. During sales order entry, based on material group of the material specified, credit control area should be determined through user exit.
May i have which user exit will help me, also i used USER_CREDIT_CHECK1. Its not working.
Expecting reply

You can not set the credit control at material level it is at company code level only and we can give credit limit to customer code wise
If having any other requirment please let me know about it
Points if helpfull
Rg Ajit

How to manage the Credit Control for Customer Consignment Process?

Hi All,
Could anyone tell me how to manage the Credit Control for Customer Consignment Process?
Thanks

Hi, there is not standard solution, we did customized process for consignment credit block , check below
1. defined status profile - with lock/auto/approved/rejected and new t.code for approval or rejected.
2. maintained consignment credit limit in Z table
3. logic for detemining status written in sales order save userexit.
4. while calcualting the values, system need to check open sonsignment order of customer/ open deliveries/ stocks at customer place MSKU table. and calculate value with MBEW/KONV ect.
5. if value is less than Z table then status AUTO, which do not need release, if value is greater than Z table put status LOCK means credit block need to release from new T.code.
Hope you get some idea

Rotating pushbutton control

I'm just starting out with labview and have a very simple question....
Labview comes with a default pushbutton control that has a green
arrow pointing to the right. I'd like to manipulate the button to
give a mirror image. Also, I'd like to be able to rotate +-90 degrees.
If this is not possible for some reason, could someone point me in the
direction of a source for learning how to create custom controls?
Thanks!

Try this link...
http://exchange.ni.com/servlet/ProcessRequest?RHIVEID=101&RPAGEID=135&HOID=5065000000080000007E7E0000&USEARCHCONTEXT_CATEGORY_0=_49_%24_6_&USEARCHCONTEXT_CATEGORY_S=0&UCATEGORY_0=_49_%24_6_&UCATEGORY_S=0
Regards| ian
Ian F
Since LabVIEW 5.1... 7.1.1... 2009, 2010
依恩与LabVIEW
LVVILIB.blogspot.com

The remote controls stopped working

I bought with an official Apple dealer the new i Pod Shuffle (generation 3) to use during my bike rides. After the first ride the remote controls stopped working and the voice over feature spontaneously started repeating the songs title. As well the volume control stopped working altogether. I didn't have time to return the Shuffle after only a week so I disable the voice over feature and keep on using my Shuffle with no volume adjustment, fast forward etc ….
After a visit to the Apple website I saw that several owners complained about this problem and assumed Apple would know about it and be ready to offer a fast solution. So picked an official Service Center as close as possible from my location.
First shock the Service Center was dirty, the paint obviously several decades old and faded, the light kept to the minimum.
Second shock not Tech on duty to check something as simple as a headsets. I realized there was no way to have a fast resolution to my problem. The Shuffle will be send to a regional repair center, I could have save the trip and just go to an Apple dealer. What the use to have Service Centers if they don't provide service?
Now when a product is returned, after 25 days of ownership (can't say use), a product designed by a company with the reputation of Apple you expect some kind of sign that the company is sorry, stands behind it's product and will do all possible to solve the problem. WRONG.
Third shock. The person who took my Shuffle obviously never saw a Shuffle generation 3 before or even knew it existed. She explained over and over that I may (but it sounded more like I will) be charge for the repair. Even asked me to pay upfront a basic fee to cover the time of a Tech checking on the product. And that the Tech will give me a quote if I am to be charged. Furthermore She found tons of reasons why eventually I would be charged to repair the product, however no technical person ever checked on the product. Well I guess only users read messages on Apple website not employees of Apple.
So what now? I am suppose to receive an E-mail in 24 hours to 5 working days, in which I'll be explained the result of the Tech investigation.
I guess most owners of Apple products have a better experience with the Customer Service or where the reputation of Apple being a “cool” company comes from? But based on my experience it looks like Apple's products and Apple's Customer Service may not meet Apple's reputation or customer's expectations. Or am I asking for too much?

I seriously doubt you were at an Apple Store and you were not dealing with Apple employees. You were dealing with a 3rd party shop that does work on Apple products.
Don't know where you are located but you could contact Customer Service at Apple and complain but they are somewhat limited it dealing with a 3rd party company. But they will at least have you complaint on file. Or you could attempt to find an actual Apple Store and take your Shuffle there. Or you could try one of the workarounds listed on the threads here.

Not able to get the database data into the Tree Control

Hi Everybody,
I have to populate the tree control with nodes and items, which is to be populated from the database, and the tree control is dynamic. I mean, there is a toolbar, whenever a pushbutton is clicked, depending on that the tree contents has to be changed.
If anybody had worked with CL_GUI_COLUMN_TREE control to get the data from database, depending upon the pushbutton selected in Toolbar, please paste the seudocode for it.
Regards,
Abdul,
Intelligroup.
P.S: Helpful answers will be rewarded.

have you seen this demo program
SAPCOLUMN_TREE_CONTROL_DEMO
Regards
Raja

CS6 problem. When I open the Mask panel, it takes up the entire screen width and the Looks controls disappear, Also, there is a new panel below the Mask panel that seems to have no purpose that I can find. The documentation says "Mask and Look panels - Th

CS6 problem. When I open the Mask panel, it takes up the entire screen width and the Looks controls disappear, Also, there is a new panel below the Mask panel that seems to have no purpose that I can find. The documentation says "Mask and Look panels - The Mask panel is now placed next to the Look panel. WIth the masking and grading tools placed side-by-side, you can now work faster on the mask workflow." Is there a way to move, hide, or otherwise manipulate the panels for a custom layout? All the examples I can find on the Web show the Looks panel to the left of the Mask panel where the controls are available.

Ok, here is what I have so far. Appdelete the iWork and reinstalled. Pages and Number work, but not Keynote.
Now, I downloaded a couple apps that I need, and no matter what I did, the spinning ball came up and the download stopped till it unlocked itself. It is really frustrating because the download was not completed and whatever came through would not mount. Could this issue be the internet connection? Permission fix showed a lot of Airport issues. I will try to run permissions fix again.

I downloaded the iCloud control panel on my PC but can't sign in - message says "This apple ID is valid but not an iCloud account. I've tried the account set up several times but it keeps just spinning me in circles. Can you help?

I downloaded the iCloud control panel on my PC but can't sign in - message says "This apple ID is valid but not an iCloud account. I've tried the account set up several times but it keeps just spinning me in circles, asking me to sign in and then I get the same message again. This is getting frustrating and I really don't seem to be able to get help. I can't contact customer support because I have a PC and there is a serial number of an apple device required.Can anyone help please?

You can't setup (create) an iCloud account using a PC. You must use an Apple device, a Mac or an iPhone etc. Once you have created an account you can sign in from your PC.

Data Origin Types not filled in the tab "Control Data" of BP interface

Hello experts,
I have loaded the clients from ECC6.0 to CRM 4.0.
Before I have loaded the clients I have maintained the data origin type for the BP in spro -> cross application components -> SAP Business Partner -> Business partner -> Basic settings -> Data Origin -> Maintain Data Origin Type.
After I have done the load initial of clients, the field "Data Origin" is empty in the tab "Control Data" in BP interface. If I do F4 in the field appear the configuration that I did in spro appear.
For this field will appear filled I'll need to do more configurations in spro?
Best regards,
Mary

Hi Mary,
The middleware does not fill this field in BP master data. You can maintain data origin type in SPRO, however the mBdoc does not use this customizing in order to fill this field.
Please try to use the BADI CRM_DATAEXCHG_BADI in order to fill this field during master data download.
It hope it helps.
Regards,
Gabriel Santana

Add change Icon in the Table Control tool bar.

Hi Abapers,
I need to add "change" icon in the table control. I added it but when I click on it is not working.
My requirement is that when I run my custom report, all the fields should be shown is in display mode. Then when I click on the "change" icon, all fields should be enabled for change.
I have already referred to the standard progs BCALV_* but it does not have the "change" icon.
plz give me any reference prg or sample code.
Thanks
Nani.

Hi Nani,
Track the function code of change icon in user command. if it is clicked then put a flag eq X.
check that flag in PBO, if it is eq X then screen-input = 1 or vice versa.
try this code:
in PBO:
LOOP AT SCREEN
IF WS_EDIT = 'X'
SCREEN-INPUT = 1
ELSE
SCREEN-INPUT = 0
ENDIF
MODIFY SCREEN
ENDLOOP
Hope it will work fine
Regards
Krishnendu

Modify data in the table control

hello:
i would like to ask a favor , i am working with a table control (it already has the information i need) all the fields all my table control are present in output form only, but i need when the user press a pushbutton to modify a specific data one of the cell of the table control permit to be change.
my output is:
field1 field2 field3   (only output )
if the user press the button 'CHANGE DATA' it will be present as
field1 field2 fiel3(ready to recibe new data ).
but i don´t know how to do it, if somebody knows how to do it
thanks a lot.

this will be your's main program
*& Report ZEMP
REPORT ZEMP.
TABLES: ZEMP." Z TABLE
CONTROLS: TAB_CONTROL TYPE TABLEVIEW USING SCREEN 1000.
DATA: IT LIKE ZEMP OCCURS 0 WITH HEADER LINE.
SELECT * FROM ZEMP INTO CORRESPONDING FIELDS OF TABLE IT.
CALL SCREEN 1000.
*&      Module STATUS_1000 OUTPUT
      text
MODULE STATUS_1000 OUTPUT.
SET PF-STATUS 'xxxxxxxx'.
SET TITLEBAR 'xxx'.
ENDMODULE.                 " STATUS_1000 OUTPUT
*&      Module USER_COMMAND_1000 INPUT
      text
MODULE USER_COMMAND_1000 INPUT.
IF SY-UCOMM = 'BACK'.
    LEAVE PROGRAM.
endif.
ENDMODULE.                 " USER_COMMAND_1000 INPUT
*&      Module MODIFY INPUT
      text
MODULE MODIFY INPUT.
MODIFY IT INDEX TAB_CONTROL-CURRENT_LINE.
MODIFY ZEMP FROM IT.
ENDMODULE.                 " MODIFY INPUT
and this should be your flow logic
PROCESS BEFORE OUTPUT.
MODULE STATUS_1000.
LOOP AT IT WITH CONTROL TAB_CONTROL.
ENDLOOP.
PROCESS AFTER INPUT.
MODULE USER_COMMAND_1000.
LOOP AT IT.
MODULE MODIFY.
ENDLOOP.
Regards
Prakash Varun

Customizing the pushbutton control in 6.1

Similar Messages

Maybe you are looking for