Customizing the System List

I'm trying to figure out how to add an item in the System List.
Up to now I figured out how to remove an unwanted item. I go into these 2 files (in the Tomcat folder) and delete the section related to the item in question.
webapps\rtrlet\xsltransforms\network\SelectInvGrou p.xsl
webapps\rtrlet\xsltransforms\common\Enums.xsl
But when I try to add an item in the 2 files mention above I get an SQL error in the web console.
Any help on this would be appreciated.
Thanks Eric

Eric,
It appears that in the past few days you have not received a response to your
posting. That concerns us, and has triggered this automated reply.
Has your problem been resolved? If not, you might try one of the following options:
- Do a search of our knowledgebase at http://support.novell.com/search/kb_index.jsp
- Check all of the other support tools and options available at
http://support.novell.com.
- You could also try posting your message again. Make sure it is posted in the
correct newsgroup. (http://support.novell.com/forums)
Be sure to read the forum FAQ about what to expect in the way of responses:
http://support.novell.com/forums/faq_general.html
If this is a reply to a duplicate posting, please ignore and accept our apologies
and rest assured we will issue a stern reprimand to our posting bot.
Good luck!
Your Novell Product Support Forums Team
http://support.novell.com/forums/

Similar Messages

System is not recorded in the system list

Hi all,
I am using BI 7 system which is connected with a source system of SAP R/3 system and there is no problem in the connectivity between these sytems.
When I tried to save a user defined ztable in BI system it shows an error below and also the description the error message would be. Please go through the following the let me provide the solution.
error: System BI& is not recorded in the system list.
Explaination of the error follows:
System BI7 is not recorded in the system list
Message no: TR638
Diagnosis
The current transport route configuration does not have the system BI7 in this current system list.
The transport route configuration was probably not maintained after the system setup, or was changed incorrectly.
Procedure for system Administration
The system Administration need to change, activate and distribute the transport route configuration accordingly. All systtems in the transport domain must be in the configuration.
Help this to solve.
--regards,
Durai.S

Hi,
Check in STMS whether your transport route is configured correctly or not. As per error message there is problem in your transport route.
Thanks
Sunny

Device Id not exists in the system list

device id is not exists in the SYSTEM
how do i add the device id to the system
previously, i have sync a few application and works fine,
yet , after i clean up merep_purge...the device id gone...
how to resolve this..

Hi yzme,
Hope your problem is resolved by now.
If not just like to mention following points and i am sure it will definitely answer all your queries.
1. Device ID gets generated only at the time of first time synchronisation with the MI server.
2. You can delete the device ID by running some function module or by uninstalling MI client.
3. but if you have deleted the device ID by mistake, you have to reinstall the application and after sync it will generate a new device ID.
4. When ever you deploy any new application it will generate a new mobile ID.
do not confuse the mobile ID with device ID. mobile ID is different for different application and user on same device.
Regards
Satya

Customizing the Settings list

When I hit the main "settings" icon, at the top of the page that comes up there are five options at the top. How do I customize that list so I can get to the most frequently used items easier, like the bluetooth that integrates with my car?

You can't. The settings menu is not user customizable.
http://www.apple.com/feedback/iphone.html.

Can't see system list in BW3.X/BI7.0 BEX Analyzer logon window

I used to be able to see our different BW system list in the logon small window when trying to open a query from a BW3.X/BI7.0 Analyzer which should be the same system list for SAP Logon screen.
But my computer was infected by virus that the operating system has to be reinstalled and then I have SAPGUI 7.10+Add-ons with SAPLOGON Customizer installed and I can see the system lists in SAP Logon screen. Then I have reinstalled BI7.0 BEX, but when I run either BW3.X Analyzer or BI7.0 Analyzer and open query, the logon small window pops up with a blank system list.
Any idea on how to make the system list show up in the logon small window when opening query in BW3.X/BI7.0 Analyzer? Maybe I need to have SAPGUI 6.40Add-ons with SAPLOGON Customizer installed first before I have SAPGUI 7.10Add-ons with SAPLOGON Customizer installed?
Thanks for any suggestion!

Have you copied the inf file from another system and copy it to windows system directory?
You need to have that copied or you need manually each and every system using the server name and System ID
thanks.
Wond

How to Create Crystal System in the System Configuration

Hi
I am trying to integrate Crystal system in the Enterprise Portal.
When i am trying to create i am not able to see the Crystal Report System in the System list.
Please let me know how to configure (Intigrate) Crystal System in the portal and how to show the crystal report in the iview.
Please help me its very urgent.
Thanks
MMukesh

Hello,
You dont create a crystal system in System Configuration.
You create a normal SAP system. There are 2 properties: Host name and Path of Crystal Enterprise system. You give that there.
Prem

GUI-- Available system list empty

Dear Expert
The SAP Systems are not displaying in GUI while maintaing system in "create new system entry", the list are empty and you can create new system by the clicking on the user specified sysstem.
I have matained the following files;
     sapmsg.ini c:\windows
     saproute.ini c:\windows
     saplogon.ini is maintained himself
sapmsg.ini and saproute.ini file maintained properly. i am able to see the Router list and message server list while maintaing the system through the group server selection screeen

Hi,
thanks for the hint with the server log. I found out that the portal server gets an error if VCServer tries to get the system list.
<b>com.sap.guimachine.portalconnector.commandhandler.CommandException: com/sap/portal/services/api/connectorgateway/IConnectorGatewayService</b>
Do you know what this means?
Regards

Empty available SAP systems list.

Hello all,
I try to make my first CR report from SAP table but available SAP systems list is empty, when i try "Create New Report from a Query" i see all systems in SAP Logon window. Could anyone help me? Thanks in advance.
CrystalReports 2008 Trial(30 day trial) + BusinessObjects XI Integration for SAP Solutions(90 day trial).
Paul Smuda

Hi,
locate the saplogon.ini file on the machine you installed the CR designer and create an environment variable with the name SAPLOGON_INI_FILE that contains the path (ATTENTION: include also the name of the file itself) to the saplogon.ini file.
If the system list is still empty after that, then please open the saplogon.ini using Notepad, go to File->Save as and choose the file to be encoded as UTF-8 (Do not modify the name). Just overwrite the existing file and try again.
Regards,
Stratos

System list remains empty

Hi,
I've tried executing the "QuickStart" example given in the Visual Composer user guide. After creating model, module, page, Iview.. I'm trying to import BAPI.
Here, when I give link to the Portal I'm using, connection with the Portal is working but the System list remains empty.
( in my Portal Landscape Directory I've defined the system an user mapping for that and Its working fine)
Can anyone suggest me, where I'm going wrong.
Regards,
Mausam

Hi Mausam,
These are the following possibilities where you may have done something wrong.
1. System Definition: Make sure you have defined the system you want
to connect. Do the following to verify the same.
In case of "UserMapping"
Checklist:
1. System Alias is defined
2. UserManagement property of the system definition is set to "UIDPW"
3. System permissions are set to give access to end users.
      eu_role/authenticated_user/or any group that you want to give access to
      the system.
      One of the above groups is added to the system definition and make sure
      eu_role has "end user" box checked.
4. Once the steps 1 to 3 are correct then go to personalize link
(For this link
      to show up the user that you logged on should have eu_role assigned),
      select usermapping and see in the dropdownlist the system you
have defined
      appears (Alias name)
      Select the system, enter the userid and password and save.
5. Now go to the support desk and check by selecting "SAP Transaction"
      if it connects automatically using the id and pwd you have
provided by doing
      usermapping.
6. If step 5 works without you entering the userid/password then
you are ready to
      test with Visual Composer. If not make sure step 4 is complete.
7. Now start the Visual Composer and connect to portal and select the system
      and specify the BAPI. It should give you the list.
If SSO:
Follow the above procedure except the following steps.
2. Make sure the UserManagement property is set to "SSO2LOGON"
4. Skip step 4
Hope this helps.
Regards
-Venkat Malempati

System list empty

Hi @ all,
I've installed VCServer on a Win2000 Server with EP 6.0.
The VC works fine if I'm using the EP that is installed on the same machine.
But if I want to connect to a portal on another Server, the system list in VC is empty.
I've checked some other posts to this topic and have done all the listed steps.
(Restart, add line into hosts file, e.g.)
Has anyone had the same problem with VC and how has he fixed it?
Regards,
Dennis

Hi,
thanks for the hint with the server log. I found out that the portal server gets an error if VCServer tries to get the system list.
<b>com.sap.guimachine.portalconnector.commandhandler.CommandException: com/sap/portal/services/api/connectorgateway/IConnectorGatewayService</b>
Do you know what this means?
Regards

How to download the custom Tables to xls from the system?

Hi
How to download the custom Tables to xls from the system?
Vijay

Hi,
Goto SE11, in the table name field give Z*, and click on display. You will get the list of Z tables.
Regards,
Prabu

You are not recognized as a user in the SAP customer notification system

Hello,
we are in OSS registered as CCC. I am able to send notifications from our SolMan to OSS with components(instalations) which are registered under out SAP customer number(our SolMan instalation etc.).
When I want to sned notification for our customers to OSS but with component of our customer(he has another SAP number, his instalation) then I got an error message
You are not recognized as a user in the SAP customer notification system:
You are not recognized as a user in the SAP customer notification system
Message no. DNO158
Diagnosis
No address data exists for this logon user in the SAP problem notification system.
The function you activated could not be executed.
Activated function Diagnosis
Send notification to SAP The notification was saved, but could
not be sent to SAP.
Update notification at SAP The notification was not updated to
reflect the SAP version.
Check for changes The system cannot compare the notification
with the current version at SAP.
Request list of the The notifications that you sent to SAP
notifications contained cannot be updated.
in the SAP problem notification system.
Procedure
Contact your system administrators.
Could you help me please?
view V_AISAPCUSTNOS ist filled with our customer numbers, I am in AISUSER...
Thanks Miloslav Pudil

Hello Miloslav,
We have the same problem.
Somebody knows how can we resolve this?
Thanks,
Diego.

Why does the System message-"Customer Num of customer is on hold" appear

Hi,
I created a UDO form with a field named Customer Code that represents a code of a customer.
Pressing TAB over the field enables to choose a customer from a list.
The list is based on Choose From List system object.
When I choose a customer, who is on hold, I get a system message:
Customer <Number of customer> is on hold. Changes cannot be saved. Do you want to proceed?
This message is irrelevant because the purpose of the form is searching and displaying data.
Why does this message appear, and how can I avoid it?
Thanks in advance.
Shai.

Maybe, just after you select the customer from the choose from list, and just before you show it in you form, thus, making the msgbox appear, you can check if the bp is frozen and manage to click in the ok button of the msgbox using UI api....
Hope it helps,
Jon Arranz

Need report to list the system name, client status, client version, OU name info for a particular collection of systems

Hi Friends,
Need report to list the system name, client status, client version, OU name info for a particular collection of systems.
Please help as it would be appreciated much as i am not familiar with creating custom reports in SCCM. Thanks.
Regards,
Thangaraj

Select v_R_System.Name0, v_R_System.Client_Version0, v_RA_System_SystemOUName.System_OU_Name0,
case when v_R_System.Client0 = '1' then 'Client is Installed'
else 'Client Not Installed'
end as 'Client Status'
FROM v_R_System JOIN v_RA_System_SystemOUName ON v_R_System.ResourceID = v_RA_System_SystemOUName.ResourceID WHERE System_OU_Name0 LIKE '%HR'
John Marcum | Microsoft MVP - Enterprise Client Management
My blog: System Center Admin | Twitter:
@SCCM_Marcum | Linkedin:
John Marcum

Set the custom timer job that copy the data in the same list

Hi
How to set the custom timer job that copy the data in the same list
Thanks,

hello
please it is wrong to copy all of the list3 item in list1 as the example as below is a copy of one item.
using System;
using System.Collections.Generic;
using System.Linq;
using System.Text;
using Microsoft.SharePoint;
//This namespace is used for the SPJobDefinition class
using Microsoft.SharePoint.Administration;
namespace GENERAL_CustomTimerJob
//To create a custom timer job, first add a class to your SharePoint project and
//inherit from SPJobDefinition. Implement the constructors and override the Execute
//method as shown below. To install your timer job, and set the schedule, you must
//add a Feature and a Feature receiver.
class GENERAL_CustomTimerJob :
SPJobDefinition
#region Constructors
//You must implement all three constructors
public GENERAL_CustomTimerJob()
base()
public GENERAL_CustomTimerJob(string jobName,
SPService service,
SPServer server, SPJobLockType targetType)
base(jobName, service, server, targetType)
public GENERAL_CustomTimerJob(string jobName,
SPWebApplication webApplication)
base(jobName, webApplication,
null, SPJobLockType.ContentDatabase)
//Set the title of the job, which will be shown in the Central Admin UI
this.Title = "Simple Example Timer Job";
#endregion
//Override the Execute method to run code.
public override
void Execute(Guid targetInstanceId)
//Get the Web Application in which this Timer Job runs
SPWebApplication webApp =
this.Parent as
SPWebApplication;
//Get the site collection
SPSiteCollection timerSiteCollection = webApp.ContentDatabases[targetInstanceId].Sites;
//Get the Announcements list in the RootWeb of each SPSite
SPList timerJobList =
null;
foreach (SPSite site
in timerSiteCollection)
                timerJobList = site.RootWeb.Lists.TryGetList("List3");
if (timerJobList != null)
string sourceUrl = "http://aydi-pc";
string destinationUrl =
"http://aydi-pc/sites/Site1/";
string sourceList = "List3";
string destinationList =
"List1";
using (SPSite sourceSite =
new SPSite(sourceUrl))
using (SPWeb sourceWeb = sourceSite.OpenWeb())
using (SPSite destSite =
new SPSite(destinationUrl))
                                using
(SPWeb destWeb = destSite.OpenWeb())
SPList ObjSourcelist = sourceWeb.Lists.TryGetList(sourceList);
SPList ObjDestinationlist = destWeb.Lists.TryGetList(destinationList);
SPListItem newItem = ObjDestinationlist.Items.Add();
SPListItemCollection items = ObjSourcelist.Items;
                                    if
(items.Count > 0)
foreach (SPListItem item
in items)
newItem["Title"] = item["Title"];
newItem["Nom"] = item["Nom"];
newItem["Prenom"] = item["Prenom"];
newItem.Update();

Customizing the System List

Similar Messages

Maybe you are looking for