Customizing Web page

How to customize the web page for the guest authentication in cisco wlc 5508 ..? and also is it possible for customizing the Lobby admin webpage too ..?

Thanks for your response
We are not using ISE as of now. I have uploaded the bundle to the WLC and i could see the customized web page. But the logo is not shown in that web page. But i have kept that .JPG file also inside the .tar file. In cli it shows like "Custome web logo... NONE"
Any clue why it is not shown ..?
KVS
Message was edited by: Prasan Venky

Similar Messages

OIM custom web page developed shows up on copy pasting the URL in browser

Hi experts,
I am facing this weird issue. I have developed a custom web page to generate password after adding custom menu item in OIM.
The web page shows up on copy pasting the URL in browser. Only System admins after loggin in should get this menu item and page after clicking on it.
http://xxxx:7778/xlWebApp/generatePassword.do
But any1 can access this page currently. I have changed the action class to check for valid session,so clicking reset doesnt trigger the code.
So atleast the functionality is protected.
But the page still shows up on copy pasting the URL. How do i prevent this from happening ??
Any suggestions and pointers would be appreciated.
Regards,
Confused developer.

My action class does extend tcAction class.
Does my action class need initialisation code i.e. below lines of code ??
               ConfigurationClient.ComplexSetting config = ConfigurationClient
                         .getComplexSettingByPath("Discovery.CoreServer");
               final Hashtable env = config.getAllSettings();
               tcSignatureMessage moSignature = tcCryptoUtil.sign("xelsysadm",
                         "PrivateKey");
               ioUtilityFactory = new tcUtilityFactory(env, moSignature);
1 more question :
Should i check for valid HttpSession() in the execute function() of the action class ??
Can you share code for a sample custom action class please ??
Thanks in advance.

Full custom web page on WLC? Not possible?

Hello Guys!
I created a custom web authentication page, and successfully loaded this page on the WLC.
This is working fine
But ... when the user press "submit" button and authenticates, the "Default WLC Web Authentication" Pop-up shows up! "You are now logged in now ... and so on".
And if you configure user policy, to let just one user to login at the same time, the second user fails to log in, and is redirected directly to the WLC's Internal Web Authentication page.
Is it possible to disable these pages?

No, nothing happens
I can see this : when I am connected to the Access Point, and type the url ( www.google.com) I am redirected to the custom web authentication page, and to the internal authentication login page ( Because this internal page, I get an "succesfull login page" after login). ( Ofcourse at first, I can see just my custom page )
https://1.1.1.1/fs/customwebauth/login.html?switch_url=https://1.1.1.1/login.html&ap_mac=f4:ea:67:63:d9:00&client_mac=00:16:6f:24:94:7d&wlan=SSID&redirect=www.google.com/

Transporting custom Web page composer page layout

Hello Experts-
I made a custom page layout for making pages via web page composer and configured all the KM settings. It works fine in Dev. Just want to know. What are the steps in transporting it.
I am sure, I have to layout template and the page. All the container iviews already exist int he system. SO, I guess I don't have to transport them. But, KM transport. What all are in need in config archive or kmc file if needed . PLease let me know.
Your help is highly appreciated.
Thanks,
Raj

Hi Raj,
In WPC following 3 type of transport required,
1) For PCD development
2) KM Development ( eg xml , xsl etc)
3) System configuration.
For system config transport refer the [transport config thread|https://forums.sdn.sap.com/thread.jspa?messageID=7243585]
_Vishal

Can the OBI welcome/spash screen be replaced with a custom web page?

Thanks

Yes, you can do so by customizing a copy of the logoncontrolmessages.xml located in the <OracleBI Home>\web\msgdb\messages folder.
For steps on how to customize the messages, look up Chapter 10 in the Presentation Services Admin Guide.
Good luck,
Son Ly

Customized web page for web authentication.

Hi,
can any one share a working "customized webpage for web authenticaiton", Virtual IP address of the WLC is 5.5.5.5.
Thanks.

Hi Nagesh,
Here's a great download which contains sample templates of each possible type of Web Policy on the WLC:
http://www.cisco.com/cisco/software/cart.html?imageGuId=7A2F6E79BAE4EFF389E1FA95D96936027AD30AE8
Best,
Drew

Displaying booking form errors on custom redirect web page

I have an event/booking with a registration web form that redirects to a custom web page (not the system page for bookings). If a customer signs up on the form using an email address of someone already registered for the event, their booking is not recorded, but I can't find a way to present the error on the web page that they are redirected to upon submitting.
The workflow notification includes the message, "ERROR: Booking could not be made as this email address is already registered for this booking."
There is a record of the failed attempt on the customer record with the email address that was used, but I need a way to tell the customer that their booking was uncessessful due to the email address used. Placing {module_error} on the web page doesn't seem to do the trick.
Any help is very appreciated.
Jake

I suspected that might be the case. Thank you for confirming. Any idea if the URL parameters applied to the redirected page indicate that there were errors? That would be awesome!
Jake

Pass Multi-value Parameter from Web Page

SSRS 2012 Sp1
Developed reports working fine. They includes some cascading parameters behaviour: it means: select Parameter1, then the values are passed to the parameter2, then the selected value (parameter2) are passed to Parameter 3 and so on.
The reports in SSRS portal work fine.
Now, the clients want to run the reports from a custom web page (It is not reporting services).
in this case the user press a button and automatically the web page retrieve the data to be passed to the report.
Here the problem: although the value passed are correct, the report is not executed! Instead, the report opens waiting for user action (as if the paramters1, 2, 3 ... must be selected).
Please, do you know how to run a SSRS report from a <Custom> web page by passing the parameters?
Thanks for your help

in that case you should be passing default values for the parameters in the report and url used should be report viewer url rather than report manager url
Another way is using report viewer
see
http://cybarlab.com/call-ssrs-report-in-asp-net-project
http://bhushan.extreme-advice.com/call-ssrs-report-with-prameters-from-asp-net-web-application/
Please Mark This As Answer if it solved your issue
Please Mark This As Helpful if it helps to solve your issue
Visakh
My MSDN Page
My Personal Blog
My Facebook Page

Using javascript in modified Aperture web page themes

Thanks to the many well-written tutorials on the subject, I've been able to modify an existing Aperture web theme to export customized web pages that have the exact look I'm after. I've successfully copied the Stock theme, edited the detail and journal-gallery html along with the global.css files and merged with a professional template I purchased, so now my Aperture-generated galleries look just like the rest of the pages on my web site.
Of course, there's always a problem:
If I reference any Javascript from the Aperture template files, Aperture EXECUTES the script during the process of exporting the web pages, and includes the result of the Javascript execution in the rendered HTML. It does this IN ADDITION to correctly writing the Javascript reference to the rendered page. The end result is TWO of everything. An example will make this more clear:
If I include the following line in journal-gallery.html:
<script language="JavaScript" type="text/javascript" src="assets/scripts/sidebar.js"></script>
and the file sidebar.js contains:
document.write('Home
document.write('<'t find a single reference to the use of scripts. CLEARLY APERTURE KNOWS ABOUT JAVASCRIPT AND EXPECTS TO FIND IT BECAUSE IT'S EXECUTING ANY SCRIPT IT COMES ACROSS!!!
The goal of all this, of course, is what any large professionally-done web site strives for: I don't want to re-render all my static content (the photo galleries) every time I add or remove a link in the sidebar. Editing sidebar.js should be all that's required to change the links.
Anyone?

Sorry, I see that the Javascript snippets in my original post are being executing by the web browser when the message is read.
The 2 lines of Javascript, cleverly (ahem) encoded, might be visualized:
document (dot) write ( <html anchor tag>Home<close html anchor tag>);
document (dot) write ( <html anchor tag>Site Map<close html anchor tag>);

ISE access custom-web templates directly

Hey guys,
I am having trouble with a ISE (1.2 patch5) at a customers site when deploying customized html pages for wireless guest-access. The reason we need to use these customized templates is that the language template for the AUP seems not to supprt too many characters and the customers AUP just shows about 20% of these. Therefore I wanted to use the multi-portal configuration to upload a set of html files generated from the samples provided by cisco documentation. The customer complains about missing logos and that the success page is complete html code. I have only remote-desktop access to open the CLI and web-gui of ISE and cannot test for myself the behavior of the pages rendered by ISE.
My question is: Is there a way to open the custom web-page without having to connect to the ISE via WLC? something like:
https://IP:PORT/guestportal/multiportal/CUSTOMPORTAL
I thought I had it in earlier versions of ISE but cannot find the URL anymore.
Some specs around ISE and WLC:
virtual ISE, standalone deployment, version 1.2 Patch 5
WLC2504 running version 7.4.121.0
It is for guest access, so it has to work for most common mobile devices and mobile-workstations(Note- and Macbooks).
Thanks for your help.

Patrick,
For the click-through flow to work correctly, you must have the custom portal set as the default on the ISE. To access the portal from your web browser, go to:
https://IPAddress:8443/guestportal/Login.action?portalname=CustomPortalName
Please Rate Helpful posts and mark this question as answered if, in fact, this does answer your question. Otherwise, feel free to post follow-up questions.
Charles Moreton

Custom Web Auth - Missing "Submit" Button

I have scoured every topic I can get my hands on here at NetPro regarding custom web authentication. I am currently supporting a customer that MUST use a custom web page for two reasons:
1. Cosmetically, and rightfully so, they would like to use their own logo. Well, why not just upload the custom image, you say? See point 2...
2. Their custom AUP is beyond the allowed 2047 characters in the default template.
So I used the default internal template for a test login, and viewed the source to grab the HTML code. I know how to read HTML, so I began commenting out the sidebar, text, and headers that I didn't want. I then inserted the custom logo and AUP text. Visually, the page is fine. However, when I preview the page, the "Submit" button is completely missing. This is true both locally, as well as when it is uploaded to the controller. I also uploaded from the controller the 'loginscript.js' file by selecting file type 'configuration' and inputting the name 'loginscript.js'. I am including that information as well because I know other people have posted asking how to get that, and I haven't seen anyone respond with such instructions. I figured it out on my own after trial and error. If it can be obtained via WCS, it would be nice if someone would post that (other than the same method I used, simply using WCS as the management tool instead of direct controller access). My controller is running code 4.1.185.0, same as my customer's controller. I modified the reference for the javascript source from src="./loginscript.js" to simply src="loginscript.js" because I am putting the script and the login.html file in the same directory. If there is a different directory structure required, I haven't found any documentation saying so other than another NetPro post indicating "Web Authentication_files" folder (whatever that means)? I also noticed that some folks are saying that such a page would have to be run on an External server. If so, why?
Regards,
Scott

Web authentication files are stored in Web Authentication_files directory which controllers can recognize. . If you want to use a different directory it is used on External Web server so that there is no conflct in the storage location.

Home Network Web Pages and my IPOD

My router recently died. Verizon installed a new router. I use a server with apache web server to access a custom web page that is connected to my X10 lighting. The web page will load and works properly from any laptop connected to the home network by Ethernet or WIFI. BUT!!!!! Now (it work fine before the new router was installed) my ipod cannot load any of the apache web pages I build. Can someone tell me what setting on the router is blocking these pages to my ipod????? I use my ipod to control my lights, my pool and pond pumps. I am really getting tired of trouble shouting this. It does not make sense that it works fine on my laptop but not on my ipod.

Are you sure that the iPad is connected by wireless to your router and is not connected to someone's LAN OR is not connected to cell phone Internet service (3G, 4G/LTE) ?
If you are the original poster (OP) and your issue is solved, please remember to click the "Solution?" button so that others can more easily find it. If anyone has been helpful to you, please show your appreciation by clicking the "Kudos" button.

Downloaded Firefox 4 to a new Laptop never used 4 before am having problems adding my custon buttons to frequently used web pages

I downloaded Firefox onto a laptop that did not have Firefox already installed. Downloading went well, but I do not know how to use 4, I had the older version on my desktop and I can not figure out how to add the applications I want to use on my bar. I had customized web pages and do not know how to re-make the app on 4. before you went into customize and you could make your own app with a picture and it brought me to my frequently used web page. HELP

Type '''about:config''' in the URL bar and hit Enter.
''If you see the warning, you can confirm that you want to access that page.''
Filter = '''browser.tabs.insertRelatedAfterCurrent'''
Double-click that preference to change the value to '''''false'''''

I want to give custome error page in web dynpro application

Hi ,
I want to give custom error page for time out condition in my web dynpro application .
Kindly give me a soulation ASAP.
Thank's and regard's.
Vikash.

Refer this :
default error page
May be it helps you.

Add Right Side Column and Web Parts to custom Master page in SharePoint Online

Hello everyone,
I hope this is a simple question, however I was fighting the issue it presents for a while. I am in the process of customizing SharePoint Online Look-and-feel with a new layout.
The site collection was created as a
Team Site before I got involved with the project, and populated with numerous sub-sites and pages. I activated required
publishing features, created html with corresponding styles and graphics, and used the Design Manager to convert the html file to the custom Master page. While SharePoint automatically assigned “ContentPlaceHolderMain” div area, I
also used default Oslo page as example to copy sections of the code for dynamic components (left column and navigation, recent items, the ribbon, etc.) from it and placed them in my new master page, pointed all CSS references to
my custom style sheets, etc. Everything works great, however I need to make one last addition -
my task is to make changes to display web parts such as Calendar and Recent Documents in the right column in the Master page.
My custom layout has a header, footer, main pan and two side columns. Most of the default master templates come with the LEFT column already embedded and populated with several placeholder
to serve dynamic content (PlaceHolderLeftNavBarTop, PlaceHolderQuickLaunchTop, PlaceHolderLeftNavBarDataSource, PlaceHolderLeftActions, so on).
My challenge is that I have the RIGHT side column as well, for which I don’t think the default placeholder exists. I need to add a small Calendar box and Recent Documents parts to it, so they
display across the entire site governed by this master page.
The issue is –
even after activating Publishing features (enabled SharePoint Server Publishing Infrastructure under Site Collection Level, and SharePoint Server Publishing under the Site
Level), there is no Snippet feature (usually available under the generic Publishing Site); this customization of the Team Site allows using Designer and apply custom templates, themes, so on, just like you would under the Publishing collection, but not the
Snippet utility I could use as the solution to embed the web parts on the master page.
Recreating the entire site under Publishing Collection is not an option due to the directions I was given, I am to use this existing one, and need to see if
there is a workaround to either activate the Snippet feature or use another solution to display the web parts inside of the column in the Master page.
If the only solution is to use Web Part Zone, what are the steps to add it AND populate it with the abovementioned apps?
Can anyone suggest how to create a workaround and add this feature? The environment is role-based so both elements need to be dynamically rendered based on the user’s role and activities.
I am more of a front end designer than developer, so if any custom coding and set up required, please kindly provide some basic steps, if possible?..
I greatly appreciate any help and suggestions!
Thank You!
Jeff
Jeff V.

Updating your Master Page to also include a right rail should be sraight forward enough with a new div or divs in your master page and then the proper styles to make room for this column as well as position the column.
I have not seen why you cannot find the snippet gallery link when previewing a HTML Master Page in the browser. Have you tried loading the snippet gallery by its url? As an example, for my tenant on SPO, I can load the Snippet Gallery for the olso.master
with the following url:
https://pixelmill.sharepoint.com/_layouts/15/ComponentConfigureControls.aspx?ComponentName=TopNavigationNoFlyoutWithStartNode&Url=%2F_catalogs%2Fmasterpage%2Foslo.master
Change the domain to match yours as well as update the "Url" querystring var to point to your master page. See if that loads the snippet gallery.
Eric Overfield - PixelMill -
ericoverfield.com -
@EricOverfield

Customizing Web page

Similar Messages

Maybe you are looking for