Customizing Y-Axis Values in Charts

hi,
We are using the column charts in the design studio 1.3 to display the sales information. In the Y- Axis the max/ Min values are 5000/100000000.
Is there any way we can display the value as 5k,100k, 1000k.etc. in the Y-axis.
Thank You,
Palani

OK, I think I see
Something like this that is in BEx Web?
Formatting Axes and Gridlines - Business Intelligence - SAP Library
"Changing the Position and Number of Tick Marks"
I don't know of a way for Design Studio to do that right now unless another community member has an idea.  It might be a good suggestion to make on Idea Place (ideas.sap.com)

Similar Messages

  • Custom Range-axis values for JFreechart

    Hi, I'm using Category Line Charts where range axis I need have specific values as labels: 20/100, 20/80, 20/70, etc, but JFreeChart, draws this automatically according to the series sent into dataset. How can I do to customize this? How do I implement or which plot or render propertie I have to refer the code to call any new class if were possible to do it?
    thanks

    http://www.jfree.org/phpBB2/index.php

  • How to change axis values in Numbers

    In v1.7 I have tried to change the axis values on existing charts but can't find how to do it...
    So I tried to create bar charts from scratch in order to rebuild the old ones with the new axis data but I can't find out how to set any of the axis values on chart creation now!!
    Has something changed - or am I just thick/blind?!!

    Is it so difficult to read given answers ?
    Barry described the correct scheme.
    In the table "to_chart", the cell A1 contains :
    =ROUNDUP(ABS(MIN(Tableau 1 :: B:E))/10,0)*10
    The cell B2 embed the formula :
    =$A$1+Tableau 1 :: B2
    Apply fill down and fill to the right.
    On the left edge, the colored rectangle is a text block in which I inserted the label values.
    Of course if you dislike this scheme, you are perfectly free to use an other application.
    Yvan KOENIG (VALLAURIS, France) lundi 4 juillet 2011 14:37:56 iMac 21”5, i7, 2.8 GHz, 4 Gbytes, 1 Tbytes, mac OS X 10.6.8
    Please : Search for questions similar to your own before submitting them to the community
    To be the AW6 successor, iWork MUST integrate a TRUE DB, not a list organizer !

  • Value axis in WAD Chart

    Hello Experts
    I am using a Chart web-item in a WAD web template. Now I have set up the value axis and the sample data property of the chart with a minimum value = -500 and max value = 3000. However, when I execute the web template on the portal the value axis show a strange behaviour with a max value = 0 and min value = -250000.
    Has any one encountered a similar problem?
    Looking forward for your help.
    Thanks
    Rishi

    Hi Rishi,
    Check the below forums which may help u...
    WAD Report -Chart Type Line Diagram!!
    Changing Starting point of Y Axis in Web Application Designer Bar Chart
    Restricting the values of infoobject for the chart in WAD 3.5
    WAD Chart item format value axis scale
    Formatting Chart Category Axis Values from BI Query!
    Also check these notes...
    SAP Note Number: 831476
    SAP Note Number: 835173
    SAP Note Number: 851402
    Regards,
    KK.

  • Line chart cuts off x-Axis value

    Hi All,
    Have created a display to display an x-Axis value versus a Y-Axis value using a Line Chart. We want to maximize the chart space so we have removed the Legend from the display, problem is doing this cuts of part of the final x-Axis label and part of the final data point on the graph ? Why - can we move the borders out ?
    Emmett

    Emmett,
    You can "Fake" some extra space out of the right side of the chart by setting the legend colors to blend into the background of the chart.  This includes unchecking the "Use Pen Color?" box and setting the labels in the legend to match as well.  Then simply set the legend to be whatever additional width you need.  Other than this there's not really any other way that I can think of.  Hope this helps.
    Sam

  • Duplicate y-axis labels on charts for small data values -- is this a bug?

    Hi,
    I have several charts where the data values are small (1,2,3). The y-axis labels are duplicated for these charts. For example, if the data value was 2 the y-axis labels display as 0 1 1 1 2 2 2. I know that I can manually set the maximum y-axis value and also set the segments on the chart to eliminate the duplicate values. My issue is that I have over 100 charts in my dashboard and I have to manually set the values each month, and then in the next month when the data values are larger I have to remove the maximum y-axis value so the y-axis value is dynamically created. Is this a known bug within the software? Is there any fix for this besides what I'm already doing?
    Please let me know if anyone else has seen this issue and if this is a bug, or if this has been corrected in any fix packs.
    Thanks!!

    Hi Jim,
    I have data for three months in the data range A1 to B3 as given below -
    Jan - 1
    Feb - 2
    Mar - 3
    In Cell D1 write a formula =MAX(B1:B3)+1 (This will give you value 4)
    Go to Chart property -> Behavior -> Scale -> Manual (Y) Axis ->  Minimum 0 and Maximum will be pointing to cell D1.
    Go to Chart property -> Behavior -> Scale -> Division -> Size of Division 1 and Minor Divisions 1
    This will give you Y Axis values as 0,1,2,3,4
    Now change value of any month to 5.  Now value in D1 would become 6 and Y-Axis would change to 0,2,4,6.
    Hope this helps.
    Rashmi
    Edited by: RashmiG on Jan 8, 2010 4:45 PM

  • How do I update the chart axis values??

    I created a Gantt (bar chart) chart in Numbers for a project at work showing schedules.  It looked fine, and everything worked great.  I want to use that same chart, but I want to just update the data in it.  I can get the bars to change, but the Y axis data (not the numbered values in the chart, but rather the the actual names out to the side of the chart) will not change.  For instance....
    Name
    Start Date
    Finish
    Task 1
    January 1, 2013
    January 15, 2013
    Task 2
    February 1, 2013
    February 15, 2013
    The Tasks on the left will be the Y axis fields in a bar chart....and the dates will populate the graph.  I've created my graph from this data and got it like I want it.  Now let's say I want to simply change some things in the Name column:
    Name
    Start Date
    Finish
    New Task
    January 1, 2013
    January 15, 2013
    Task 4
    February 1, 2013
    February 15, 2013
    So without creating a new chart or anything, I just want to reflect the new names in my existing chart.  In Excel, when you change the value data, it updates the chart and "it just works" .  I'm wanting to use Numbers for this, and I feel like this is a simple thing that I'm just missing.  Help!

    Jerrold....thanks for the reply.  While you didn't answer my question exactly (I know I was a bit vague), you did put me on the right path.  I was trying to get the Category Axis values to change on the chart whenever I updated them in the table itself.  I couldn't figure out why they weren't but I think I have now. 
    I noticed that in the Category Axis field (Inspector) it had the actual typed names of my tasks from the table instead of the cell locations.  So...."Task 1" instead of "Table 1: C7".  I cleared out all of the text in the Category Axis field, which removed it from the chart.  then I just clicked on the fields in the table and it populated the Category Axis blank with the table/cell info instead of the text.  So now when I update one of the fields, it updates the chart because it's pulling from the cell data every time.
    I'm not really sure why Number, by default, enters the text into the Category Axis when making a chart instead of putting in the corresponding cell locations, but whatever.  I got it working now and should be good to go going forward, thanks for your help.

  • Access the X-axis value from Flash Chart

    Hi,
    Is there a way I can access the X-axis value from Flash Chart to populate a report in another page? My X-axis is not a direct column in the table it is computed in the query.
    X-axis is MON-YEAR computed from the Begin_Date column. I want to capture the MON-YEAR clicked by the user to populate a report for that Mon-Year.
    Here is my chart SQL.
    select 'f?p=&APP_ID.:18:&SESSION.:::::::' link,
    to_char( "VIEW"."BEGIN_DATE",'MON-YYYY') label,
    sum(decode(TYPE_Id,2,Value,0)) "Value-1",
    sum(decode(TYPE_Id,1,Value,0)) "Value-2"
    from "VIEW" where to_char( "VIEW"."BEGIN_DATE",'MON-YYYY')= to_Char(sysdate-100, 'MON-YYYY')
    group by to_char( "VIEW"."BEGIN_DATE",'MON-YYYY'),
    to_char( "VIEW"."BEGIN_DATE",'YYYY')
    order by to_char( "VIEW"."BEGIN_DATE",'YYYY')
    Any suggestions?
    Thanks

    Thanks Marco..
    I did the same thing. I found this info at Re: Charts and links
    in the forum.
    Thanks for the help again.
    Nimmi

  • Line Charts - X-axis Labels as function of X-axis value

    Hi,
    1) Is there a way to put X-Axis labels in line chart as function of X-axis values ?
    For instance, X-axis values are in minutes and I need to show those as Hours.
    I'm having Hours as separate column as well, but when its selected as X-axis value column, the line graph is disturbed.
    2) Also, how to specify the length/range of X-axis ?
    For instance, in dataset if I've x-axis values from 0 to 5 hours but still want to show on graph the X-axis till 8 hours.
    Thanks for your help in advance.
    Regards,
    Sumit

    Hi Sumit,
    I have tried following things with proper datetime format may be help you.
    1> in your applet code you can add below param
    <PARAM NAME="XAxisDateFormat" VALUE="H">
    it will display your levels in hours for more details please refer Date and Time Format under query template in MII help.
    2>In your Query template under date range you can select duration and duration unit.
    for 8 hour span you can select Duration = 8 and in duration unit = H
    I have tested it for a tag query, may be i did not understand your issue properly but hope it helps you!!!
    Regards,
    Manoj Bilthare

  • Adding weekday name to x-axis in a chart

    I am trying to add a weekday name to the horizontal axis in a chart (SSRS).
    In horizontal Axis Properties I went to number, then Custom, and added:
    =(WeekdayName(Fields!Date.Value))
    It nearly works. I have put in this week's dates into the parameters (23/02/2015 - 28/02/2015) but the x-axis is showing the dates as numbers, eg 23 - 24 - 25. I'd love to see the words Monday, Tuesday et al in there instead.
    When setting up the chart I have Fields!Date.Value as the category group, at the moment grouped on =day(Fields!Date.Value)
    Any suggestions on how to get 'Monday', 'Tuesday' etc to appear would be much appreciated.
    I have tried
    =weekdayname(weekday(Fields!Date.Value)). This partly works but unfortunately repeats the day of the week the report was run, eg Monday Monday Monday rather than Monday Tuesday Wednesday et al.
    Thanks.

    Hi William,
    According to your description, you want to display the weekday name on the x-axis in a chart, right?
    In your scenario, you can specify the both category group value and group expression as weekday name values. Please refer to steps below:
    1. The original chart which x-axis values display as date.
    2. Specify the x-axis Label and Group on expression like below:
    =weekdayname(weekday(Fields!date.Value))
    Then preview the report, the a-axis values will display as weekday name.
    If you have any question, please feel free to ask.
    Best regards,
    Qiuyun Yu
    Qiuyun Yu
    TechNet Community Support

  • Graph X-Axis Labels are appearing in middle for negative y-axis values

    Hi,
    In my Graph Output, the X-Axis Labels are appearing in the middle (where zero is appearing) if the Y-Axis values are negative.
    It's a Line-Graph.
    Can anyone let me know how to move the X-Axis Labels to down?
    I'm using a custom Function module same as 'GFW_PRES_SHOW_MULT' wherein I'm modifying the line colors and appearance. I have to edit in this Function Module to make the X-Axis Labels appear correctly (below) even when there are negative values.
    Please let me know which Parameter of the Class CL_CU_AXIS I've to use.
    Here's the piece of code:
    CALL METHOD graphic_proxy-ref->add_cu_bundle
                EXPORTING
                  port   = if_graphic_proxy=>co_port_chart_y_prim_axis
                  bundle = bundle_axis
                IMPORTING
                  retval = local_retval.
    Thanks & Regards,
    Sowmya

    Hi Sowmya,
    Im Lakshmi working as an ABAP Developer. I have seen your profile in SCN. I saw  your postings about OLE charts.
    I have a requirement to
    1) Output data from an internal table into excel, and
    2) Create a chart from the data in excel
    So far I have been able to export the data using OLE calls, created a chart object,.
    My question:
    1. How to put Data Lables
    2. How to put Data Table under the Chart
    3. How to rename the series names.
    Below is the recorded Macro. I don't know how to convert it to ABAP.
    Sub Macro1()
    ActiveSheet.Shapes.AddChart.Select
    ActiveChart.ChartType = xlColumnClustered
    Application.CutCopyMode = False
    ActiveChart.SetSourceData Source:=Range("B1:E4")
    ActiveChart.SeriesCollection(1).Name = "=Sheet2!$A$2"
    ActiveChart.SeriesCollection(2).Name = "=Sheet2!$A$3"
    ActeChart.SeriesCollection(3).Name = "=Sheet2!$A$4"
    ActiveChart.SetElement (msoElementDataLabelOutSideEnd)
    ActiveChart.SetElement (msoElementDataTableWithLegendKeys)
    End Sub
    I have attached the current output and expected output.
    I have searched about this in google but i could not find any solution for this.
    Your help is greatly appreciated.
    Thanks,
    Lakshmi.

  • Changing the custom XML for a flash chart dynamically

    Hello
    I am wondering if anyone has found a way to change the custom XML
    for a flash chart dynamically.
    For instance.
    On the www.anychart.com website their is a gallery with charts.
    I have studied one called "2Dlinetimechart. It has hours on the X-axis.
    When I view the XML for this chart.
    I found this enrty
    - <block color="0x0080C0" border_color="0x0080C0" name="Sales dept.">
    <set value="0" argument="0" name="00:00" />
    <set value="1" argument="0" name="01:00" />
    It uses the tag value to set the position on the X-axis. But the tag name to set the labels on the X-axis.
    I have not found a way to do this in application express 3.0.
    Therefore I wonder if I can change to XML dynamically, and build my own block based on the input I have.
    Or even build a chart, based on a xml that I create first then sends to the object that renders the chart.
    Hope this makes sence ?
    Ulf
    PS this is related to my question about
    http://forums.oracle.com/forums/thread.jspa?messageID=1887210?
    using dates on the x-axis.
    But would by nice to know a general method to rebuild the xml-file dynamically so I can change the chart within the limits of the xml-definition.

    String value = ResultSet.getObject("myfield").toString();
    String opvalue = "15";
    <OPTION Value=15 <%=((opvalue.equals(value))?"selected":"")%>>

  • Excel MSGraph Axis Value w/ Report Gentration Tool kit help needed

    Hello,
    I am working on making all my Printed Data sheets dynamic so I don't need to have an Excel Template for each test I create. I have been able to make my own modifications to some of the Report Generation tool kit VIs to add little things I need or want changed, but I am stuck.
    I currently have LabVIEW writing Charts in Excel, using the Insert Graph VIs from the tool kit but I want to be able to make the X Axis Values invisible but leave the Y values for this particular data sheet.  I have looked through all my documentation but cannot find anything referring to setting that.
    What is the correct ActiveX Method and/or Property that I need to incorporate to do this? I found that in Excel if I click on the Chart it is in the Chart Options Menu but I cannot find a way to control it through LabVIEW.
    I am currently using 7.1.1 with Office 98 and the Report Generation Toolkit 1.1.0
    Any ideas?
    Thanks
    Jeff
    Jeff D.
    OS: Win 7 Ultimate
    LabVIEW Version: 2011,2010,2009 installed
    Certified LabVIEW Architect

    Hello,
    LabVIEW should have access to everything that the excel ActiveX object publishes.  One way to discover how to do it would be to record a macro in excel, where your recorded actions are on the x-axis as you desire.  This way you will have a macro which you can run that will do this for you.  Perhpas more importantly, you will then be able to look at the code for that macro you recorded, and make the equivalent calls in LabVIEW, which should basically expose which ActiveX calls on that object achieve the axis modification.  In any event, to help you with this process, below are some useful links.  Also, you will find other threads on this matter if you search the discussion forums.
    Excel and LabVIEW Integration Tutorial:
    http://zone.ni.com/devzone/conceptd.nsf/webmain/4d86c9752c658da78625689300730c10
    Here are links to examples of using macros in Excel from LabVIEW:
    http://sine.ni.com/apps/we/niepd_web_display.display_epd4?p_guid=B45EACE3DD2F56A4E034080020E74861&p_...
    http://sine.ni.com/apps/we/niepd_web_display.display_epd4?p_guid=B45EACE3D9D856A4E034080020E74861&p_...
    I hope this helps!
    Best Regards,
    JLS
    Best,
    JLS
    Sixclear

  • How to show 1 value in chart

    Hi there! just want to ask how to show the value 1 in chart?
    Thank you in advance!
    Best Regards,
    Jef

    Hi jefnavarro,
    According to your description, you hope the value 1 to be displayed in series. If so, please refer to the following steps to set minimum value of Horizontal Axis to zero:
    Right click anywhere of Horizontal Axis on the chart and open Horizontal Axis Properties dialog box.
    In Axis Options pane, in Axis range and interval section, click the expression (fx) button next to Minimum.
    In the expression text box, type =0, then click OK.
    The following screenshots are for your reference:
    If you have any questions, please feel free to let me know.
    Best Regards,
    Wendy Fu
    Hi there and good day to you! 
    First of all thank you for the clear steps that you share but I don't know why still won't come..
    maybe because my horizontal axis is starting from 1 as you can see on the lower part of my screenshot.. how can i set this to 0?
    thank you again.
    edited:
    just want to add that my data is only counting on data in Values [Count(Name)] in chart data maybe that's why i don't have 0 value?

  • Stacked Bar showing VALUE literal instead of X axis value in hover hint

    I am converting to APEX 3.0 and noticed that the new "Show Hint" doesnt display the X axis value on a Stacked bar. Instead it shows the literal "VALUE". For example, I am displaying the number of orders for a given day. X=date, Y = count. I was expecting the Hint to display "11/15/07, 15" but instead it displays "VALUE, 15".
    This same sql displays correctly when I use it in a Line Chart.
    Any ideas? Thank You

    Bump...having same issue, still scanning message board for solution.

Maybe you are looking for