Customs export declaration not getting created

Hello everyone .. i need help of your expertise
I am creating billing document on R/3 and we have made it such that the F2 document flows onto GTS and creates a Customs export declaration
The issue here is i have created the billing docs but i cannot find them on GTS.
I checked the value of the goods is not equal to zero
Checked the SM58 to see of any RFC log is there at the time of document creation and time .
checked SLg1 on GTS to see if any log , but no log is there .
It is basically an export order from EU country to a non EU country
and i checked the billing doc and it is export relevant
The document is flagged to go into GTS in document control settings on R/3
Plant , company code and everything is mapped.
It is an intercompany customer transaction.
When i try to pull up the CULOEX by using the reference doc # from feeder system its saying no documents found
in test environment the billing doc is flowing onto GTS and creating CULOEX succesfully.
The sales order and delivery docs basically passed the compliance test and they are good.
Can someone suggest me where else i need to go and look at .
your help is very much appreciated.
thanks
Bharad

Hi Bharad,
Could you let us know the current status of the issue? If it is resolved could you pls share us how you have done it as it is the most occurring issue and leaves no clue too? If not resolved, Could you check whether the Badi /SAPSLL/IF_EX_CTRL_SD0C_R3 is activated in R/3 or not?
Regards,
Shiva

Similar Messages

Excise invoice should not get created without PGI

Hi,
I have a scenario where the billing document is being generated by the customer without PGI after creation of outbound delivery for exports. (This is as per customer's requirement - Copy control maintained in VTFL for the same - copying requirements 11 )
This creates a situation - excise invoice can be created without PGI - which creates problems for customer. This should not happen.
Customer wants a check during the excise invoice creation - excise invoice should not get created if PGI has not been done.
Kindly advise as to how this can be done.
Regards,
T Saravanan

Dear Saravanan
Two options are there
- in your existing routine itself, you can specify the control in such a way that unless the preceding document is PGId
- apply excise user exits like J_1I7_USEREXIT_EXCISE_BEF_SAVE to achieve the requirement.
thanks
G. Lakshmipathi

File not getting created in a different server

My requirement.
I have written a code in the BI system and now need to write an empty file (say a.done)in a directory /interfaces of PI system.
I wrote using open data set and close data set however the file (a.done) is not getting created in the PI system even though the directory /interfaces exist.
When I give any directory of that of BI system ,the file(a.done) is getting created i.e the file is getting created on the same server and not on the different server.
Is there any function module or any other way for the file to get generated in the PI system.
Please explain with an example.
Regards,
Vish

Try to use search FTP in se37 or checkout the below FM
CALL FUNCTION 'EPS_FTP_MPUT'
EXPORTING
 RFC_DESTINATION =
* FILE_MASK = ' '
* LOCAL_DIRECTORY = ' '
* REMOTE_DIRECTORY = ' '
* OVERWRITE_MODE = ' '
* TEXT_MODE = ' '
* TRANSMISSION_MONITOR = 'X'
* RECORDS_PER_TRANSFER = 10
* MONITOR_TITLE =
* MONITOR_TEXT1 =
* MONITOR_TEXT2 =
* PROGRESS_TEXT =
* IMPORTING
* LOCAL_DIRECTORY =
* REMOTE_DIRECTORY =
* LOCAL_SYSTEM_INFO =
* REMOTE_SYSTEM_INFO =
* TABLES
* FILE_LIST =
* EXCEPTIONS
* CONNECTION_FAILED = 1
* INVALID_VERSION = 2
* INVALID_ARGUMENTS = 3
* GET_DIR_LIST_FAILED = 4
* FILE_TRANSFER_FAILED = 5
* STOPPED_BY_USER = 6
* OTHERS = 7
IF SY-SUBRC <> 0.
* Implement suitable error handling here
ENDIF.

Attachment not getting created in PI from CRM

Hi Everyone,
I am trying to create attachments in PI from CRM but it is not getting created there. I am executing the following steps:
By default I am getting the attachment data in Binary format so I am using this function module to convert it into XSTRING format.
          CALL FUNCTION 'SCMS_BINARY_TO_XSTRING'
                          EXPORTING
                     input_length = lv_input_length
                     first_line   = lv_first_line
                     last_line    = lv_last_line
                   IMPORTING
                     buffer       = lv_xbuffer
                   TABLES
                     binary_tab   = file_content_binary.
   2. Then I am getting the server context and the protocol.
                       obj_server_context = cl_proxy_access=>get_server_context( ).
                       obj_attch_protocol ?= obj_server_context->get_protocol( if_wsprotocol=>attachments ).
* Assign File naame to STRING Variable
                       lv_name = lv_filename.
* Attach file to the service response.
                       obj_attachment = obj_attch_protocol->get_attachment_from_binary(
                                  data = lv_xbuffer
                                  type = if_ai_attachment=>c_mimetype_pdf
                                  name = lv_name ).
                       APPEND obj_attachment TO t_prx_attach.
                       obj_attch_protocol->set_attachments( t_prx_attach ).
   3. Then I am using a proxy class which has Input and Output structures for sending data to PI and getting the response respectively. And then in the end I am calling the proxy and passing the structures.
     With this I am unable to see the attachmenmts in sxmb_moni transaction. Please help.

Hi Gurus,
Can you please help with some pointers on this.
I have used below links as reference for coding.
Link 1 :
http://help.sap.com/saphelp_nw04/helpdata/en/a7/3b2a2d45a34a23b75e3b18745c63bc/content.htm
Link 2:
http://scn.sap.com/community/pi-and-soa-middleware/blog/2012/10/19/abap-proxy-protocols-use-cases-and-examples
After setting attachment(Method SET_ATTACHMENTS) i am not getting any exceptions,but still i am not able to see any attachment created in SXMB_MONI.
Thanks in Advance,
Manil.

Spool not getting created in batch job

Hello experts,
We have a requirement of printing BA00, BA01 and LD00 from different application.
We have done same code for all BA00, BA01, and LD00.
Normally the code is working fine except in few cases, when batch job is created but spool is not created.
DATA: job_name TYPE tbtcjob-jobname,
 number TYPE tbtcjob-jobcount,
 print_parameters TYPE pri_params,
 wv_pripar TYPE pri_params,
 wv_arcpar TYPE arc_params,
 wv_val TYPE c VALUE 'X',
 wv_false TYPE c VALUE 'X',
 gv_mandt TYPE tsp01-rqclient,
 gv_user TYPE tsp01-rqowner.
 CLEAR: gv_mandt, gv_user, number.
 gv_mandt = sy-mandt.
 gv_user = sy-uname.
 job_name = 'DELIVERY_PRINTING'.
 CLEAR: range1.
 range1-sign = 'I'.
 range1-option = 'EQ'.
 range1-low = 'LD00'.
 CLEAR: range1-high.
 APPEND range1 TO range.
 CALL FUNCTION 'JOB_OPEN'
 EXPORTING
 jobname = job_name
 IMPORTING
 jobcount = number
 EXCEPTIONS
 cant_create_job = 1
 invalid_job_data = 2
 jobname_missing = 3
 OTHERS = 4.
 IF sy-subrc = 0.
 SUBMIT sd70av2a WITH rg_kschl IN range
 WITH rg_vbeln IN deli_tab
 TO SAP-SPOOL
 SPOOL PARAMETERS print_parameters
 WITHOUT SPOOL DYNPRO
 VIA JOB job_name NUMBER number
 AND RETURN.
 IF sy-subrc = 0.
 CALL FUNCTION 'JOB_CLOSE'
 EXPORTING
 jobcount = number
 jobname = job_name
 strtimmed = 'X'
 EXCEPTIONS
 cant_start_immediate = 1
 invalid_startdate = 2
 jobname_missing = 3
 job_close_failed = 4
 job_nosteps = 5
 job_notex = 6
 lock_failed = 7
 OTHERS = 8.
 IF sy-subrc <> 0.
 ENDIF.
 ENDIF.
 WAIT UP TO 10 SECONDS.
** to give the data to the printer***
* CLEAR gv_rqident.
 SELECT SINGLE listident INTO gv_listident FROM tbtcp
 WHERE jobname = job_name
 AND jobcount = number.
 IF sy-subrc = 0.
 MOVE gv_listident to gv_rqident.
 CALL FUNCTION 'RSPO_OUTPUT_SPOOL_REQUEST'
 EXPORTING
 spool_request_id = gv_rqident.
 ENDIF.
The same code is for all the output BA00, BA01 and LD00.
The issue is that for few batch jobs (which is created in the above code) , spool is not getting created.
Thanks and Regards,
Paritosh Pandey

Hi,
The code starting from WAIT UP TO 10 SECONDS. - not only does it look attrocious, is error prone (if no free process for executing batch job is available for 10 seconds, or if the job runs for more than 10 seconds, what will happen...?), but seems utterly unnecessary... Is there any reason immediate spool output can not be handled by simply setting PRINT_PARAMETERS-PRIMM = 'X'?
cheers,
Janis
Edit in:
Ok, i just read Document in spool but not printed... Do not use an output device relying on frontend access methods to do printing from background processing. Frontend is not available during background processing, period. To my knowledge there is no easy, clean solution to this problem other than defining and assigning, per user, output devices not relying on frontend printing. What if the dialog user has logged off by the time batch job finishes..? May the spool remain unprinted?
Has the SAP Basis refused to define output devices (I have hard time believing this...)? Well, tell them one time to stop being silly and if they do not cooperate, tell the owner of the requirement that it can not be implemented due to uncooperative Basis then... and that the users will have to keep going to SP01 and manualy start the output!
Message was edited by: Jānis B

Transfer Requirement not getting created

Hi All,
My query as below;
Production order is created using KANBAN (Control Cycle/Supply Area is defined) using classic KANBAN.
WM is in place and all the setting related to TR/TO creation for WM movement type 103 is in place.
When i am trying to receive this Production after completion it is not creating the TR/TO, while as material document is getting generated and shows the stock directly in interim storage type 901 without creating TR and TO.
Further i checked there is indicator in Production order i.e "Kanban indicator" that gets checked automatically when Production order is created using KANBAN Processs and if i remove that indicator forcefully, TR and TO is getting created normally.
Please provide some inputs where can be the problem and how TR and TO can be created normally eventhough KANBAN indicator is checked in Production order and where i can found the setting related to "KANBAN INDICATOR".
Appreciate your help.

Hi Maddy
Thanks very much for your response.
1. When you use KANBAN, you define separate KANBAN storage location, which is different from WM-managed replenishment storage locations, and separate KANBAN interim storage area with storage bin.
Yes different storage location is defined which is not WM-managed in supply area.
As you said Control Cycle is defined, see if the interface is properly defined for both of these Sloc.
Where i can check whether interface is properly defined or not.
2. See if you have defined the KANBAN replenishment strategy with Control type Transfer Requirements from a Storage Location which is being controlled by WM in the Customizing for Production under KANBAN > Replenishment Strategies > Define Stock Transfer Strategies
Actually for a material two strategies are defined like;
1) In-house Production strategies-0003-
supply area is defined with storage location which is IM managed.
And when this order is completed and i am trying to receive this in WM SLOC (usally whatever SLOC we have defined in supply area it proposes that SLOC at the time of receipt but i am changing this manually to WM managed SLOC) using transaction MIGO, it is directly taking the stock to 901 interim storage type and in total the stock increases but the problem is when TR is not getting created i am not able to take this to the storage bin as per strategies defined.
2) Stock Transfer Strategies-This is working fine and in that TR/TO is working fine.
3. For TO to get created automatically by the system from the transfer requirement, see if an indicator Automatic TO creation in the replenishment strategy is set or not. Yes this is set for stock transfer strategies but i didn't find option to check the TO creation automatically for in-house production strategy
4. Also, check that you have set up a suitable replenishment movement type for KANBAN in the Customizing for Warehouse Management under Activities > Transfers > Define Movement Types (i.e.standard is 350 for KANBAN replenishment)-Yes this is also defined correctly.
Appreciate your more inputs on this.

Required attribute not getting created

Ok, here is a wierd one.
I have some custom ID management code (an SSO plug-in cert mapper and a WAR file I deploy to OC4J_SECURITY). The application provides a registration process that creates user entries and RADs for Oracle Forms app users. Everything works fine, except that I have found that my RAD creation does not get the orclresourceviewers attribute created automatically.
This has worked in my IM development farm. The attribute would be created automatically. It was difficult to figure out this was the reason my Forms App Server would fail with the following exception.
oracle.ldap.util.AccessDeniedException: General Error when performing search: getExtendedProperties [LDAP: error code 50 - Insufficient Access Rights]
I have gone through the motions of now preparing to query the OID Forms ID so that I can fill in this attribute in my RAD creation class. I still would like to know why this attribute is not getting created for me anymore.
Any ideas?
Oh and BTW, it did not help that orclresourceviewers is not documented anywhere I could find (not OID Admin and not Forms Deployment Guide)
regards,
tt

Hi Sandeep.
Yes, my application entities that I set up to manage a specific realm are used to create all RADs in a particular realm. As part of the setup for this I add these application entitites to the following three realms:
cn=OracleDASAdminGroup,cn=Groups,cn=OracleContext,dc=<realm_name>,dc=<abc>,dc=<com>
cn=RealmAdministrators,cn=Groups,cn=OracleContext,dc=<realm_name>,dc=<abc>,dc=<com>
cn=UserProxyPrivilege,cn=Groups,cn=OracleContext,dc=<realm_name>,dc=<abc>,dc=<com>
I add to these so that the app entity could create, modify, delete and proxy to any realm user. I had to create an ACI to allow my entities to search and see the Forms Server application entity entry in order to populate orclresourceviewers.
I just wish I new why orclresourceviewers does not get created automatically. Of course, if I create the RAD in DAS or using the Oracle DynamicResourceCreate option, it is added. It has added it in my own RAD creation code at one point and it stopped for some reason.
I had to add an LDAP search to my RAD creation code with the possibility of multiple Forms Server entries (Logical Application Group) just in case. Much ado for something that maybe should not have been necessary.
regards,
tt

Infotype not getting created using FM HR_INFOTYPE_OPERATION

I am trying to create infotype 210 from user exit ZXPADU02 using below code.
DATA : v_return TYPE bapireturn1,
           v_return1 TYPE bapireturn1,
           v_return2 TYPE bapireturn1,
           v_key TYPE bapipakey,
           v_return3 TYPE bapireturn1.
p0207 = gt_p0207.
MOVE-CORRESPONDING p0207 TO p0210.
p0210-infty = '0210'.
p0210-begda = p0207-begda.
p0210-taurt = 'PR'.
p0210-txsta = '01'.
p0210-amtex = '0'.
CLEAR : p0210-aedtm.
CLEAR : p0210-uname.
CLEAR: v_return,v_return1,v_key.
CALL FUNCTION 'BAPI_EMPLOYEET_ENQUEUE'
    EXPORTING
      number        = p0210-pernr
      validitybegin = p0210-begda
    IMPORTING
      return        = v_return.
IF v_return IS INITIAL.
    CALL FUNCTION 'HR_INFOTYPE_OPERATION'
      EXPORTING
        infty         = '0210'
        number        = P0210-PERNR
        subtype       = 'PR'
       objectid      = p0210-objps
       lockindicator = p0210-sprps
        validityend   = P0210-ENDDA
        validitybegin = P0210-BEGDA
       recordnumber = p0210-seqnr
        record        = P0210
        operation     = 'INS'
      IMPORTING
        return        = v_return1.
ENDIF.
CALL FUNCTION 'BAPI_EMPLOYEET_DEQUEUE'
    EXPORTING
      number        = p0210-pernr
      validitybegin = p0210-begda
    IMPORTING
      return        = v_return.
But infotype 210 is not getting created.
When i check it from PA30, i get error
"No data stored for Residence Tax Area in the selected period"
Can anyone tell me what is the problem here.
Full points will be rewarded.

HI,
check the value coming on the screens are properly.Use DIALOG_MODE as foreground and check whether all fields getting populated.
Check any default values need to be populated.
Regards,
Manoj.

Reservation not getting created from shopping cart for stores order.

Hi experts,
Reservation not getting created from shopping cart for stores order,process used is some custom BADI.Extended classic scenario is the procrss .
Please help me
Thanks in advance.

Hello,
please check below wiki:
Determination of the follow-on document type
Regards.
Laurent.

SC - Item in transfer process - PO is not get created

We are in extended classic senario , SC is showing status as Item in transfer process - PO is not get created .
Could you please give me any pointer for the same
Thanks in advance .

Hi,
Other customer has also reported this issue and the fact that it is
happening sporadically. Hence Development has created a report for this
issue, please see the below note:
729967: Shoppng cart:Status I1111,no follow-on docs->analysis report
Please run the above report and then check the effected shopping carts.
Also I would recommend the following note to be implemented:
1233037: BBP_MON_SC: Shopping cart transfer ends in status I1111
Please implement both notes and run the report. This should help with
this issue.
I hope this helps,
Kind Regards,
Lisa

Help Pls Table is not getting created

Hi,
DECLARE
 CURSOR c
 IS
 SELECT * FROM emp;
 v_count NUMBER;
BEGIN
 BEGIN
 SELECT COUNT (*)
 INTO V_COUNT
 FROM all_tables
 WHERE table_name = 'EMP_BKP';
 IF V_COUNT = 0
 THEN
 EXECUTE IMMEDIATE 'CREATE TABLE EMP_BKP AS SELECT * FROM EMP';
 ELSE
 DBMS_OUTPUT.put_line ('Table already created');
 END IF;
 END;
 BEGIN
 FOR i IN c
 LOOP
 INSERT INTO EMP_BKP
 SELECT *
 FROM EMP
 WHERE empno = i.empno;
 END LOOP;
 END;
END;
Error report:
ORA-06550: line 15, column 13:
PL/SQL: ORA-00942: table or view does not exist
ORA-06550: line 15, column 1:
PL/SQL: SQL Statement ignored
06550. 00000 - "line %s, column %s:\n%s"
*Cause: Usually a PL/SQL compilation error.
*Action:i don't understand why table is not getting created
Edited by: 924575 on Apr 23, 2013 12:35 PM

Frank Kulash wrote:
Hi,
924575 wrote:
Hi,
DECLARE
CURSOR c
IS
SELECT * FROM emp;
v_count NUMBER;
BEGIN
BEGIN
SELECT COUNT (*)
INTO V_COUNT
FROM all_tables
WHERE table_name = 'EMP_BKP';
You probaly want to check USERtables, not ALLtables.
IF V_COUNT = 0
THEN
EXECUTE IMMEDIATE 'CREATE TABLE EMP_TEST AS SELECT * FROM EMP';Is this right: you want to create a table called emp_TEST, but only a table called emp_BKP does not already exst?
ELSE
DBMS_OUTPUT.put_line ('Table already created');
END IF;
END;
BEGIN
FOR i IN c
LOOP
INSERT INTO EMP_BKP
SELECT *
FROM EMP
WHERE empno = i.empno;
END LOOP;
END;
END;
Error report:
ORA-06550: line 15, column 13:
PL/SQL: ORA-00942: table or view does not exist
ORA-06550: line 15, column 1:
PL/SQL: SQL Statement ignored
06550. 00000 - "line %s, column %s:\n%s"
*Cause: Usually a PL/SQL compilation error.
*Action:i don't understand why table is not getting createdWhat are you trying to do?
Creating tables in PL/SQL is rarely a good idea.
What can't you create the table, once for all, and TRUNCATE or DELETE the rows when necessary?Frank ,
thank you so much for ur reply.
Even user_tables also not working .i modifed as EMP_BKP that also not working.
Yea. i agree. but requirement is i want to create dynamically. if same table already exists no need to create table.
modified code is
DECLARE
 CURSOR c
 IS
 SELECT * FROM emp;
 v_count NUMBER;
BEGIN
 BEGIN
 SELECT COUNT (*)
 INTO V_COUNT
 FROM user_tables
 WHERE table_name = 'EMP_BKP';
 IF V_COUNT = 0
 THEN
 EXECUTE IMMEDIATE 'CREATE TABLE EMP_BKP AS SELECT * FROM EMP';
 ELSE
 DBMS_OUTPUT.put_line ('Table already created');
 END IF;
 END;
 BEGIN
 FOR i IN c
 LOOP
 INSERT INTO EMP_BKP
 SELECT *
 FROM EMP
 WHERE empno = i.empno;
 END LOOP;
 END;
END;
ORA-06550: line 24, column 22:
PL/SQL: ORA-00942: table or view does not exist
ORA-06550: line 24, column 10:
PL/SQL: SQL Statement ignored
06550. 00000 - "line %s, column %s:\n%s"
*Cause: Usually a PL/SQL compilation error.
*Action:

Inbound Activity not getting created with Campaign Response

Dear Experts,
I am working in a scenario where we are using Campaign Automation for sending Email Survey to business partners.
Mails are reaching the BPs, survey response also coming to the survey tables, But the Inbound activity is not getting created in the system.
I am using standard Transaction type ''0000'' for inbound activity. . which is ''Appointment'' and Category type ''Date'', direction ''inbound''
The Action profile for this activity is Campaign_Automation_Activity. . .
I have done questionnaire determination is customizing too.. .
Am I missing a something??
Some linking of this Activity with Campaign element?
Please suggest!!

Hello Naresh,
Thanks for the reply, but can u explain me in details.
1. I am using the MKTCA PBO n PAI,
2.I have checked the BAdI CRM_SVY_MKTCA_PAI and checked the Transaction type ''0000'' hardcoded, so using the same Transaction type, the Category is hrdcoded as ''002''
3. Transaction type ''0000'' is active.
Please suggest?

Workitem not getting created

Hi,
I have build a workflow based on "QMSM" at event "COMPLETED". I have done the event linkage correctly and transported the customizing request in the client I want to test it in.
The workflow has been activated without error. Itu2019s working when I test it from development environment, that is, from workflow builder.
When I create a notification and complete the task, the event "COMPLETED" is getting triggered of "QMSM" object. In the event trace I could find out the green indicator against the event which means the workflow was recognized by event manager.
But there is no workitem getting created. Could you please help me finding out the problem behind it?
Why is workitem not getting created?
Event Trace result is:
Event Instance ID 577459
Object Type QMSM
Object Key 0003000046080003
Event COMPLETED
Receiver type WS99900010
Receiver FM SWW_WI_CREATE_VIA_EVENT_IBF
RFC Destination WORKFLOW_LOCAL_201

The problem is workflow is not getting triggered.
I had triggered the WF manually by executing the FM SWW_WI_CREATE_VIA_EVENT_IBF (from se 37 directly) which resulted in work item (WF instance) created. The WF error issue (Exception on ZFM) has been removed.
The process that i follow:
(1) I create a notification and add a task & complete the task. <--- This does not trigger WF (and this my problem)
(2) Event trace gives the things in GREEN. I double click the event trace record.
(3) I get the necessary parameters from event trace corresponding to the event (COMPLETED) of object type QMSM and execute the FM SWW_WI_CREATE_VIA_EVENT_IBF. This result in creation of a work item (triggering of work flow), In other word - A instance of WF is created that we can call the work item.
My problem is -> even after correct event linkage, why is workflow not getting triggered?
Could you please point out what would be going wrong?

Invoice is not getting created in Order related billing

Dear all,
I am trying to do a Order related billing. After creating the order i am going to VF01 and selecting the billing type i have created and trying to create the invoice. I am getting the error "No billing documents were generated. See log" when i am checking the Log its showing now errors.
In case if my account determination procedure is wrong, system should allow me to create a Sales invoice and accounting document will not be generated. But in this case even the sales invoice is also not getting created.
Please suggest me if there are any configuration changes i need to do to overcome this problem.

Apart from the suggestion already given, also ensure that
the order is not showing in incomplete log
the order is not blocked for credit limit
You can also cross check in VF04 whether system is fetching that sale order. For information, once you execute VF04, by default, system will check only "Delivery related" check box. You have to manually select "Order related" check box.
G. Lakshmipathi

Weblogic Domain not getting created in SOA Suite 11g R2

I have installed the components of SOA Suite 11g R2 (11.1.1.3) on a single Windows XP SP3 machine (32 bit) following recommended procedures. I tried to configure Weblogic server using Domain Configuration utility. After navigating hrough the wizard, no Weblogic server profile is getting created in the doamin folder. Even the WL Admin server is not getting created. The Domain Configuration utility did not throw any errors.
1) Is this problem related to Oracle repository for SOA suite 11g?
2) Can the repository schemas (Oracle) hold multiple weblogic SOA domain information?

Hi,
Weblogic servers directory do not gets created after domain creation or even managed server configuration. It will present itself only when you start the managed server for the first time, that is when it initializes all security attributes, diagnostic attributes (if configured) , etc..
Perform server start and then check if it gets created or not.
## rank answer if it is helpful ##
Thanks,
Ranjan

Customs export declaration not getting created

Similar Messages

Maybe you are looking for