Customs Number Guarantor (insurance Comp has an incorrect value()

Hello,
I am configuring default data for Guarantor (Insurance Company). After searching I have found that 'Office of Destination' is the same field as Guarantor. ( Kindly correct me if this is not the same fields).
I have populated insurance company by default data in the US Import document. When i check messages I am getting following error 'Customs Number Guarantor (insurance Comp has an incorrect value()'
Message: M4010 - Customs Declaration U.S. ABI(EI)
Appreciate if any help on this.
Regards
Pradeep

Hi Dave,
Appreciate your quick reply. thank you.
Can you please elaborate on the possible solution regarding error message. Im not able to figure out the same. I am attaching the screen shot of partner tab with error message.
Thanks
Pradeep

Similar Messages

Error "XML tag Main/@versionMinor has incorrect value 001; expected value."

I'm going to describe our scenario.
We have created an Abap proxy in a BW system to run a XI interface. The abap proxy in BW is connected to the IE of a XI 3.0 system. That scenario runs without problems with BW 3.5 (basis 6.40). Now, we are migrating the release of BW to 7.30. we have created the Abap proxy in the migrated BW system but when we run the interface the next message is returned:
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
- 
- <SAP:Error SOAP:mustUnderstand="1" xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/">
<SAP:Category>XIProtocol</SAP:Category>
<SAP:Code area="PARSER">UNEXPECTED_VALUE</SAP:Code>
<SAP:P1>Main/@versionMinor</SAP:P1>
<SAP:P2>001</SAP:P2>
<SAP:P3>000</SAP:P3>
<SAP:P4 />
<SAP:AdditionalText />
<SAP:Stack>XML tag Main/@versionMinor has the incorrect value 001. Value 000 expected</SAP:Stack>
<SAP:Retry>N</SAP:Retry>
</SAP:Error>
does anyone know what the problem is? is there a version conflict between BW 7.3 and XI 3.0?
Thanks very much

Hi,
I'm not an expert, but it might be that you would also need to update the XI content to match the new release and then regenerate the proxy.
It does indeed seem to be a difference in the version of the proxies between BW 3.5 and BW 7.3.
Regards,
Horia

Has someone knowlege of how to use Custom Number Format in Numbers V3.0

Hello Everyone,
From Excel to Numbers '09 I worked with Custom Number Format.
Making formats like 60 sec, km/h or m/s².
In the new Version 3.0 it is not under 'Format'/Custom Number Format.
I did not find it! Has someone found a way to do it the old way.
I am working with the German version.
Bye

Limmy,
There is no option in Numbers 3.0 for Custom Format. If that is mandatory for your purposes, it is still available in Version 2.3.
Jerry

Gaps in customer number range

Hi SAP Gurus
We have been reviewing our customer master data and noticed that a series of GAP in our customer number range.
Please could anyone advise on what is reponsible for this and how it can be fixed.
Thanks, Felix

Hello Felix,
There are a number of reasons why gaps in invoice numbers may occur:
1. Object RV_BELEG is buffered. In this case the performace is improved
   but this gaps are produced.
2. Update terminate/shortdump occures while billing document update.
   - the number is set in to the invoice at the beggining of the program
   If an interruption of the process happens after the assignation of
   this number, the number has run in the range and cannot be recovered.
   Update terminations in transaction VF01 and VF04. The billing
   document number is reserved prior to the update. After a possible
   update termination, it cannot be used again. Update terminations are
   displayed in transaction SM13. At present, there is no possible
   solution.
3. Incorrect userexit, eg.in Program RV60AFZZ, USEREXIT_NUMBER_RANGE.
Please check the following notes in order to solve this incidence:
175047 Causes for FI document number gaps (RF_BELEG)
19050   Gaps in document number sequence for billing docmt
23835   Buffering RV_BELEG / Number assignment in SD
As you might need to answer to the auditor on the gap of the invoices,
report RFBNUM00 from note 175047 will help you to display
document number gaps to the auditor if in your country the FI document
numbers must be assigned continuously. You use this report to document
the number gaps and the auditor will accept it.
We know that in different countries you have to explain document gaps
to Legal Authorities. For this reason there is report RFVBER00 to
document gaps occured due to an update termination.
As I already stated above report RFVBER00 does only list update
terminations that are not older than 50 days (or according to what time
is maintained in your system). So it could be that this log has already
been cleaned up. It is necessary that these update terminations are
documented before the 50 days expire.
Or a second possibility is that the gaps occured NOT due to an update
termination. Gaps without update terminations be (easily) explained.
They can be (only) detected via report RFBNUM00. Report RFBNUM00 display
these document number gaps for the number range object RF_BELEG.
Thanks,
Alex

Changing customer number in alv top of page for every new customer

hi experts,
in alv grid display top-of- page, how to change customer number customer name for every new customer.
please help me.
Regards
Naveen.

You may look into this blog
http://help-abap.blogspot.com/2008/09/salv-model-5-add-header-top-of-page.html
This is has been contributed by one of the SCN contributor Naimesh Patel.
a®

Customer number not in the inspection lot for a make to order scenario

Hi All,
I know that standard SAP will get the Customer number into Insp. lot only for insp. types 10/11/12. I am wondering if someone know a way to get the customer no. into insp. lot for insp. type 04 where the material is make-to-order scenario and the Production/Process order has the Sales order and customer no. without activating User-exit. The quality users want to be able to see the customer no. in insp. lot without having them to go to process order.
It makes no sense to me why the customer no. is not brought into insp. lot when that is available in the Prod/process order, which can further be used to select the customer specific insp. plans for 04 insp. type Insp. lot without using Variant configuration.
Any light on this topic is appreciated.
Thanks.

Hi Srikant,
I guess.........
Normally the inspection lot refers the triggering document that are the trigger cause for them.
- Inspection type 01: - Purchase Order and GR material document.
- Inspection type 03: - Pro. Order Number
The same way...
The inspection type 10\11\12 are purely related to the SD, and directly integrates QM and SD. Hence in the inspection lot for the inspection types directly integrated to SD, it will furnish the Sales order number \ Customer.
But the inspection type 04 is purely have it's relation to Production process. So it will have the details related to integrations it has i.e. the "Pro. Order." Hence it integrates QM-PP, it have the data related to PP (Pro Order), not the SD's one.
But I think one way you can achieve it,
Assign the Customer number also to the inspection plan along with the Material. So I think at the time of assigning the inspection plan to the inspection lot, it will refer the Customer number also and will display the Customer number along with Task list Group\Group Counter, in the inspection specification screen in QA03/02
Regards,
Shyamal

Customer number of business partner can not be determined

Hello,
I created the BP for role TR0100 Main Loan Partner and I also added the role for FLCU00 for FI Client where I put the Company Code information and link this BP with the customer number in FI.
When I am create a general loan (SAP Banking) the system did not determine the customer number in the Partner view, so when I go to make a Disburse (FN5V), I put the company code and the contract number, and then I get the error message "Customer number of main loan partner cannot be determined" Message no. 67087.
I have reviewed the configuration and the SAP help for this scenario but I have not resolved this problem. We are starting this project so do you think this error could be generated because FI has not been fully customized ?
Thank you for your help.

Thank you Prasad,
But I have not resolved the issue,
I reviewed you 2 suggestions but the issue still continues.
1. I configured 2 company codes and the settings for product types and the activities for the loans are completed. In fact, I can save contracts and see the cash flow.
2. I am using for example the condition 201 A_Nominal Interest and the flow type assigned is 0110 and the check "Payment transaction" is set.
I hope you can tell me others suggestions,
Thank you.
Regards

Customer number to be populated as co pa characteristics in rev line item FB50

Hi
FB50
Debit Customer
Credit Revenue with profitability segment as cost object
In profitability segment customer number has one of the characteristics.
In this credit line above we need to populate the customer field (which is part of co pa characteristics)
from debit line item as part of co pa characteristics.
Is it possible. An earliest response would really be appreciated.
Aparrajith

Hi Aparajith
You can write your Code in the exit COPA0005 on the similar lines as provided in the Note
I have asked people to implement the note in similar occassions in SCN Forum and till date no one has said that this did not work..
I would suggest ask your ABAP guys to debug and check the reason for not working.. Else, writ your own code
Br. Ajay M

Return to vendor via delivery, customer number for each vendor?

Hi
We wish to use return materials to Vendor via delivery process
addition to required configuration, we need to maintain Customer number in Vendor master
In out plant we have more than 500 Vendor masters, do we need to create customer number for each vendor? or can we create a generic customer ????
Business has a concern on creating customer for each vendor since number is huge, Sales guys may get confused with these numbers
Please suggest a way out
Thanks

Thanks Jurgen for the reply
We have Vendor Work flow setup in the system. Which means when ever vendor master is changed [Return indicator ticked] workflow kicks off which means it goes for approvals. This is why we dont want to go for tick as and when needed. When ever there is a return, return to vendor must be ticked, it will go for approval etc so it slows the process
we are thinking if we can achieve through data load before SAP GO-Live so that users able to return without any delay
NOTE 447070 says 'the automatic creation of the required customer data is not supported in the data transfer'
this is related to automatic customer create isnt it
i was thinking as below
--> Create Ship-to's for all vendors
--> Load vendors via LSMW [along with return to vendor ticked and customer number(created above)]
Tested in SAP
created ship-to
Created vendor with above customer number
Do you see any issue?
Thanks

Convert customer number to Unconverted value(in DB format)

Hello,
I have a question..
How to convert the customer number (KONP-KUNNR) to unconverted value which in 10 characters?
My customer number only has 8 characters, but I need to display it in 10 characters.
Is there any standard function module that I can use?

Hi,
Use this FM CONVERSION_EXIT_ALPHA_INPUT.
data: lv_kunnr type kunnr.
lv_kunnr = konp-kunnr.
CALL FUNCTION 'CONVERSION_EXIT_ALPHA_INPUT'
EXPORTING
input = lv_kunnr
IMPORTING
OUTPUT = lv_kunnr
With this function module u get ur kunnr with 10 characters that is with leading zeroes.
Thanks,
Anon

U00BFTransaction to clear customer number with its equivalent vendor number?

Dear Gurus,
Our client has many customers that are vendors at the same time, obviously with different vendor numbers BUT same Fiscal number. Each customer has its vendor number associated in the master data; and each vendor has its correspondent customer number associated in its master data.
Now, how can I clear vendor invoices with customer invoices? Invoices that become from the same Fiscal number?
Which is the transaction to do that?
Any help will be rewarded.
Thanks a lot

Hello,
Please, try this link Automatic open item clearing for vendor/customers
Regards,
Eli

7 character field to purchase order ,customer number

please help
1)
data : kunnr1(7) type c.
data : kunnr like kna1-kunnr.
kunnr1 has only field length 7 and it is of type character.
kunnr is a sap field.
everytime i need to fill the data from the field kunnr1 to sap kunnr and pass to bdc .
suppose kunnr1 = 1930903 ie 7 characters .
and in sap shall i simply copy like this
kunnr = kunnr1. " will this work
or
concatnate '000' kunnr1 to kunnr.
or
any other one .
2)same with the purchase order number.
data : po(7) type c.
dat : bstdk type vbak-bstdk.
po = asdefgr
bsdtk = po
or
concatenate '' po to bsdtk.
if i assign value from po to bsdtk will at end command will work on bstdk?
example
loop at itab into workarea.
at last bsdtk." i need this to work so tell me how to assign the value from po to bsdtk
endloop.

i checked the customer number in sap system,
in the sales order it is stored as 1277494
i checked in vbak table and it is stored as 1277494and rest blank spaces.
i checked in kna1 table , the same kunnr is stored as 0001277494.
why is this difference?
so i need to use the 'CONVERSION_EXIT_ALPHA_INPUT' for kunnr?
I checked for po but that is stored as a charater format and no need to add the leading zeros, is that right?
I used CONVERSION_EXIT_MATN1_INPUT for material do i need to use CONVERSION_EXIT_ALPHA_INPUT for material also?
thank you for the solutions given.

Select name1 frm kna1 table on basis of customer number

hi below is my PAI code
my requiremnt is to select name1 field from kna1 table where
kan1-kunnr = t_ZCUST_EM_create-ship_to
where to code it pls suggest and how it will be displayed in the screen 200 ie when user press enter the name1 should automatically populate and display on the screen...
PROCESS AFTER INPUT.
MODULE CANCEL_200 AT EXIT-COMMAND.
LOOP WITH CONTROL TABLE_ZCUST_EM_CREATE ."AT T_AIMS_OPN_CREATE ." .".
   MODULE USER_COMMAND_0200.
CHAIN.
FIELD t_ZCUST_EM_create-ship_to .
MODULE set_field_validation ON CHAIN-REQUEST.

hi anji
here is my code i ahve written in PAI event but facing problem that whne i save entering the third firled in table zcustemal which has ship_to ship to name
and email id, kunnr is matched against kna1 table and eror msg comes if the kunnr in not in kna1 table it is working ok
now also name 1 is being populated in the field in the screen as per my code
but problem is
1) when just typing kunnr and email id ( and press save without enter the data for all three is saved ie kunnr name1 ( which is selected from table kna1) and e mail id
2) but whne i press enter after entering kunnr number on screen and then enter email id an dsave email id is not saved only kunnr and name1 is saved pls suggest
where should i code dont know pls suggest??????
CODe in screen
PROCESS BEFORE OUTPUT.
LOOP   WITH CONTROL TABLE_ZCUST_EM_CREATE."AT T_ZCUST_EM_CREATE
    MODULE STATUS_0200.
ENDLOOP.
*Process after input
PROCESS AFTER INPUT.
MODULE CANCEL_200 AT EXIT-COMMAND.
LOOP WITH CONTROL TABLE_ZCUST_EM_CREATE ."AT T_zcust_em_CREATE ." .".
    CHAIN.
      FIELD t_ZCUST_EM_create-ship_to .
      MODULE set_field_validation ON CHAIN-REQUEST.
    ENDCHAIN.
    MODULE USER_COMMAND_0200.
ENDLOOP.
module read_table_value_0200.
<b>MODULE set_field_validation INPUT.</b>
nv added for three email id and ship_to name
select single * from zcustemail   where ship_to eq
t_zcust_em_create-ship_to
and ship_to_name = t_zcust_em_create-ship_to_name
and email_id = t_zcust_em_create-email_id.
if sy-subrc eq 0.
    t_gui1-fcode = 'BACK'.
    append t_gui1.
    t_gui1-fcode = 'EXIT'.
    append t_gui1.
    t_gui1-fcode = 'SAVE'.
    append t_gui1.
    SET PF-STATUS 'AIMS_200' excluding t_gui1.
    message e001 with 'Record already Exists in Zcusteamil'(001).
else.
*nv
    CALL FUNCTION 'CONVERSION_EXIT_ALPHA_INPUT'
          EXPORTING
             INPUT         = t_zcust_em_create-ship_to
          IMPORTING
              OUTPUT       = t_zcust_em_create-ship_to.
     select single kunnr from kna1 into v_kunnr
     where kunnr = t_zcust_em_create-ship_to.
    if sy-subrc = 0.
       select single name1 from kna1 into t_zcust_em_create-ship_to_name
       where kunnr = t_zcust_em_create-ship_to.
      SET PF-STATUS 'AIMS_200'.
       else.
       message E001 with 'customer number does not exists'.
   endif.
*nv
endif.
ENDMODULE.                 " set_field_validation INPUT
*Setting it for select/deselect entries
move:t_zcust_em_create to t_zcust_em_create_sel.
append t_zcust_em_create_sel.
clear:t_zcust_em_create_sel.
*Getting internal table t_zcust_em_create with control
read table t_zcust_em_create
         with key ship_to = t_zcust_em_create-ship_to.
*Getting internal table for create entries: screen-200
if sy-subrc ne 0 and t_zcust_em_create-ship_to ne space .
    append t_zcust_em_create     .
    move:t_zcust_em_create to t_zcust_em_create_tmp.
    append t_zcust_em_create_tmp .
    clear:t_zcust_em_create_tmp ,
          t_zcust_em_create      .
endif.
clear:t_cols.
*Getting the value of w_fill_200.
describe table t_zcust_em_create lines w_fill_200.

0fi_Ar_4 customer number missing when payer

Customer number is "sometimes" blank in the PSA when payment is made to payer account (cleared items) includes payer account number.
Comparison of BSAD when payer is present against when payer is missing has not shown any differences.
Any ideas why payer is not being passed to BW?

HI,
My suggestion...
debug the data source RSA3 level..
or
u can see maintain data source.. selection or hide options.. ( check once)..
raj

Customer number got blocked in previous dunning

Hi Friends,
This is with regard to customer number got blocked in previous dunning which the printout has already generated and the job got deleted by the user.
When I tried to execute the same customer number in new dunning, it is showing the message "Account D 0010003064 is blocked by dunning run 20090326 MAN01"
Also I tried to change the dunning level in line item, but I'm not able to change as it is only showing in display mode and showing a message "This document is scheduled in the dunning run 26.03.2009 MAN01. Making a change to this document does not affect the dunning status, You should not make any document changes until the document does not appear in any further dunning selection".
Could you please let me know how to release the blocked customer from previous dunning.
Thanks a lot.
Regards,
Dwarak.

Hi,
The invoices are blocked in one of the previous dunning run.
Goto F150, give the identification and date as mentioned in the error.
Identification : MAN01
Date : 26.03.2009
Delete this proposal and dunning run.
Similarly delete all those dunning run which are only proposed but not run completely.
Now do a fresh run and you must be able to post the dunning forms..
Cheers
Redoxcube

Customs Number Guarantor (insurance Comp has an incorrect value()

Similar Messages

Maybe you are looking for