Cut a folder using command + x option

trying to cut a specific folder using command + x option bt could not able perform the operation. While i select command and x option after selecting a specific folder it throws back annoying BIP  noise ,definitely rejecting the command...FYI..i can cut copy paste any word document ...

MadlyBrown said "...FYI..i can cut copy paste any word document ..."
I took that to imply MadlyBrown wanted Cut & Paste of a file.
Niel gave the Mac way: Command-C, then Command-Option-V
Moof666 gave a hacky Windows way: Command-C, Command-Delete, then Command-V
I mostly whined that Command-Delete by itself was not strictly Command-X in the Windows sense.

Similar Messages

  • Split PDF by pages using command line options

    Hi,
    I am after a product to split a PDF file by pages / bookmark using command line options.  It would be good, if the product comes with functionality to call from VB/.NET SDK.
    I googled and came across many products, out of these following looks good.  Has anyone used this.  Please suggest me.
    www.neeviapdf.com
    www.coherentpdf.com
    Thanks
    Sarav

    You are posting in the wrong forum. This forum is for Acrobat Scripting.

  • MAC Mouse and Keyboard Do Not Work, when I am trying to re-install the OS using "Command R" option

    I am trying to re-install MAC OS 10.8.2, but when I hold "command R" I am asked for the firmware password, but the keyboard and mouse do not work.
    If I only select "option" during the boot up process it will ask me for the firmware password, keyboard and mouse work, but I can only select the HD option.
    Can someone advise what is the problem here, and your resolution.
    I have tried different commands "option + command + R' with no luck.

    I tried what was provided on the link, but it is not working.
    I hold it down, before the gray screen and the chime, but it only prompts but the firmware password.
    I tried based on the specific order in the support document and at a random press and hold.
    No go any other thoughts?

  • Uninstalling bulk dll's from gac folder at one time using command prompt

    Hi All,
    I need to unistall bulk dll's at a time from the GAC folder using command prompt ,can any one suggest how to do this.

    Hi,
    1. Create a batch file as "Uninstall.bat".
    2. Edit this file and copy the below statements in it:
    gacutil.exe /uf DLL1
    gacutil.exe /uf DLL2
    gacutil.exe /uf DLL3
    gacutil.exe /uf DLL4
    gacutil.exe /uf DLL5
    replace DLL1 to DLL5 with your actual DLL names, which you want to uninstall.
    3. Open Visual Studio Command Prompt as Administrator.
    4. Browse to the location where you have placed the above batch file.
    5. Run the batch file.
    Hope this will help.
    HTH,
    Sumit
    Sumit Verma - MCTS BizTalk 2006/2010 - Please indicate "Mark as Answer" or "Mark as Helpful" if this post has answered the question

  • Javadoc command line options

    I have a custom doclet which generates xml output instead of the default ouput from javadoc.
    I am trying to pass custom command line options to my custom doclet class.
    The following is my javadoc command:
    javadoc -classpath c:\junit\junit3.8.1\junit.jar;C:\j2sdk1.4.1\lib\tools.jar -doclet DocGenerator -dest c:\docgen\temp C:\DocGeneratorTest.java
    When i use the above command i get the following error:
    javadoc: invalid flag: -dest
    I am trying to access the value of dest in my custom doclet.
    Regards
    -rv

    Perhaps the following will help. It explains how to use command-line options
    Any doclet that uses custom options must have a method called
    optionLength(String option) that returns an int. For each custom
    option that you want your doclet to recognize, optionLength must
    return the number of separate pieces or tokens in the option. This page gives an example:
    http://java.sun.com/j2se/1.4.2/docs/tooldocs/javadoc/overview.html#options
    -Doug Kramer
    Javadoc team

  • How to test ODI Agent - using command line / scripts ?

    We can test ODI scheduler Agent from Topology manager, is there a way to test it using command line options / scripts ?

    Go to <ODI_HOME>/oracledi/bin in command prompt and invoke startscen command with teh below parameters.
    Edited by: Guru Sankar on Feb 28, 2011 4:19 PM

  • Starting Safari with command-line options

    I am an old Unix Hacker who just started with Mac. Since scripting is an important
    part of old-school UNIX, I do many things via scripting.
    My question is: Is there a way to start Safari from the command line using command-line
    options that will allow Safari to open up multiple tabs with each tab pointing to a pre-defined
    URL?
    Thanks,
    msprewitt

    Hi,
    Type this in terminal,
    open http://www.google.com http://www.yahoo.com
    It will open the two web pages in two tabs. man open for more option.

  • Selecting particular folder using file tag browsing button in jsp

    Hi,
    I want to select a particular folder using file browsing option in html. why i want this is : i have to update the resumes located in a particular folder. so every time i am opening that folder which is a subfolder.
    ex: c:\dir1\dir2\dir3\Resumes
    Eveevry time , i have to go to C -> dir1->dir2-->dir3 then Reusmes
    what i need is when i click the browsing button, i want to get the Resumes folder directly. Is there any option to do that one by setting value to file tag.
    thanks in advance
    my mail id [email protected]

    how do you know the machine that the browser is on has that directory structure?

  • How to copy files using single user option command??

    i want to copy all fonts in library/fonts to the original fonts folder in system/library/fonts becouse i cut all fonts in the original folder to font folder under library and the mac doesn't work,but still i can access the system from single user options, and i need to know the command to copy the fonts

    Files can be moved with mv or copied using cp or ditto. Use commands such as 'man mv' for usage instructions, or check Apple's developer documentation.
    (54261)

  • Why won't Final Cut Pro 7 allow me to Shift, Command or Option-select items?

    I am having a major problem with Final Cut Pro 7. I commonly select multiple items using the Shift (⇧), Command (⌘), or Option (⌥) keys. However, just recently it started not allowing me to select multiple items this way. What happens is either the timeline, the slug, or the canvas will play (depending on which one is selected) I didn't change anything on the computer; it just started happening. I even tried reinstalling the whole entire Final Cut Studio. However, the problem still remains. This is a real problem and really is causing major issues for me. How do I fix this!?!? I'm at a loss. I've tried everything that I could think of short of reinstalling the entire OS (which I may end up doing). Can someone help me?

    >I believe that the uninstaller that Digital Rebellion provides (and I used) does, in fact, delete the preferences...
    Of course. DR's FCS Remover does exactly what it says on the tin. Except it does not come in a tin.
    What it does is remove every vestige of any version of Final Cut Studio.
    I ran it on my computer and filled the space that FCS took up by running a script which installed an animated .gif of a dancing banana several times over. Let's be honest. Video editing is a stupid hobby anyway.
    Here is the banana...

  • Robocopy deleted SOURCE folder using MIR option

    I am migrating a customer file server share from a windows 2003 server to a windows 2012 R2 server.  This is the second time I've found some source folders missing when using the MIR option.
    I did an initial copy last weekend, all went fine.  I then did a second copy, which should do a file/directory compare and re-copy or delete in destination server's root folder if needed.  Both copy operations were performed on the destination
    server.  Below is the command I used:
    \\xenshare\publicreadonly" d:\PublicReadOnly\ *.* /E /ZB /SEC /COPYALL /MIR /R:2 /W:30 /V /ETA /LOG+:d:\filecopy-publicreadyonly.log /TEE
    I checked this morning to find 6 missing folders on the source server under the root folder I specified, which I was trying to preserve before decommissioning the old server.  The log file shows no indication that anything was deleted.  Can anyone
    explain why the instruction specifies nothing would be deleted in the source folder using MIR option but I have files missing?  And NO, I did not have any empty source or destination folders either and the domain admin account I used had full rights to
    all folders.  

    Hi Ronnieshih,
    If you want to audit what was happening to those deleted folders, and to make a further troubleshoot, I would like to recommend you to create a test folder, If this issue can be reproduced, please refer to these steps to monitor:
    1.  please try to enable audit on the source folder:
    [1] Configure "audit object access" in AD Group Policy or on the server's local GPO. This setting is located under Computer Configuration-->Windows Settings-->Security Settings-->Local Policies-->Audit Policies. Enable success/failure auditing
    for "Audit object access."
    [2] Configure an audit entry on the specific folder(s) that you wish to audit. Right-click on the folder-->Properties-->Advanced. From the Auditing tab, click Add, then enter the users/groups whom you wish to audit and what actions you wish to audit
    - auditing Full Control will create an audit entry every time anyone opens/changes/closes/deletes a file, or you can just audit for Delete operations.
    2.  Please run process monitor on the source machine to capture the activities against the source files, since this issue is random with time, this method may produce a large size of log file.
    Best Regards,
    Anna Wang

  • Alert sound when using Command Cut, Copy

    Hi there
    I have what seems to be a strange but recurring problem on a particular website where I have to edit a lot of text and keywords around. I'm using an Apple Macbook running on 10.7.4, but also regularly use an iMac on 10.5.11, and on both computers whenever I use Command + Cut, Copy or Paste I have to endure my alert sound over and over again.
    I know I could simply mute my volume but it's very frustrating and I'd simply like to know why it's happening.
    I have posted in the forum of the website I'm using and no other Mac users have this problem.
    If it's a Command key problem why is it specific to the website I'm using? The alert sound doesn't happen repeatedly when I'm Command + Cutting, Copying or Pasting in any other application.
    It doesn't seem to be a problem with this website because no other users are reporting this.
    I came across a similar forum discussion here but after running Repair Disk Permissions the problem isn't solved.
    Any ideas would be much appreciated!

    Please read this whole message before doing anything.
    This procedure is a test, not a solution. Don’t be disappointed when you find that nothing has changed after you complete it.
    Step 1
    The purpose of this step is to determine whether the problem is localized to your user account.
    Enable guest logins* and log in as Guest. For instructions, launch the System Preferences application, select Help from the menu bar, and enter “Set up a guest account” (without the quotes) in the search box. Don't use the Safari-only “Guest User” login created by “Find My Mac.”
    While logged in as Guest, you won’t have access to any of your personal files or settings. Applications will behave as if you were running them for the first time. Don’t be alarmed by this; it’s normal. If you need any passwords or other personal data in order to complete the test, memorize, print, or write them down before you begin.
    Test while logged in as Guest. Same problem(s)?
    After testing, log out of the guest account and, in your own account, disable it if you wish. Any files you created in the guest account will be deleted automatically when you log out of it.
    *Note: If you’ve activated “Find My Mac” or FileVault in Mac OS X 10.7 or later, then you can’t enable the Guest account. The Guest login created by “Find My Mac” is not the same. Create a new account in which to test, and delete it, including its home folder, after testing.
    Step 2
    The purpose of this step is to determine whether the problem is caused by third-party system modifications that load automatically at startup or login.
    Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards. Boot in safe mode* and log in to the account with the problem. The instructions provided by Apple are as follows:
    Be sure your Mac is shut down.
    Press the power button.
    Immediately after you hear the startup tone, hold the Shift key. The Shift key should be held as soon as possible after the startup tone, but not before the tone.
    Release the Shift key when you see the gray Apple icon and the progress indicator (looks like a spinning gear).
    Safe mode is much slower to boot and run than normal, and some things won’t work at all, including wireless networking on certain Macs.
    The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
    *Note: If FileVault is enabled under Mac OS X 10.7 or later, or if a firmware password is set, you can’t boot in safe mode.
    Test while in safe mode. Same problem(s)?
    After testing, reboot as usual (i.e., not in safe mode) and verify that you still have the problem. Post the results of steps 1 and 2.

  • I need to export Quicktime files using the PhotoJPEG, MJPEG-A, or DV codec.  Is this possible in Final Cut Pro X?  In the options under export I don't see any of these available.

    I need to export Quicktime files using the PhotoJPEG, MJPEG-A, or DV codec.  Is this possible in Final Cut Pro X?  In the options under export I don't see any of these available.  I'm a newbie to this so any help would be greatly appreciated.

    I'm importing .MOV files from my Canon 5Dmk2 at 1080p.  So should I just export using a different codec and then use Compressor or MPEG Streamclip to convert to an MJPEG-A or PhotoJPEG codec?

  • HT2714 Mac Mini won't launch after it has been reprogrammed using Command+Option+R?

    Out of nowhere while using my Mac MIni it goes whacky and I get a white/grey screen!! I diagnosed the hardware...read out "No Problems". I try restarting the computer. No luck...same old story! I tried to reprogram it holding down the Command button+Option+R....the unit starts to reprogram and finishes after about 34 minutes. Still same old story, white/grey screen! I will be making an appointment to get it fixed. It still under warrantee. In fact it only 44 days old!! Any ideas on how to restore it now, instead of me having to travel an hour to drop it off to get it fixed???

    Using CMD+r try erasing & reinstalling the OS.

  • Bulk PDF generation using 3-rd party tools and/or command line options

    Good day!
    I have another question:
    Is it possible to automatically convert a pack of Frame Maker books into PDF's using 3-rd party tools or command line options.
    Thank you

    Check out Datazone's DZbatcher available at
    http://www.datazone.com/english/overview/download.html
    This will give you the ability to batch convert FM books to PDFs.

Maybe you are looking for