Cut and paste in place ... not in place

i cut and paste in place from a layer to an other and its not in the right place. it seems new since CS6
i have multiple artworks on my file but i could do it since then. do you now how to not talke care of it ?

Well that might be the way you wish it to work but it does not work that way and it was feature request that was overwhelming desired sothe behavior was made so that when you pasted in place it pasted in place relative to the active artboard.
Thought there are global rulers there are still artboards and if someone wants more than one artboard this would be expected behavior.
You have a choice of how you can do what you wish to do
1. you can keep the artboard panel visible and simply select the artboard you want to be active that will not affect then selected object or layer and theen either paste in front or paste in back or paste in place
2 select your object to be cut, then the object on the layer you wish to paste the object and then slect the original artboard by clciking on the edge of the artboard that will not change the layer you now have selected and choose one of the three paste options mentioned. this is actually a better choice because if you are working on that artboard you want it selected incase you need to bring it into focus.
3. You can cange the focus to the artboard you want by selecting in from the artboard list at the bottom left of the document window.
However though you are being a little cute about this it is I believe a feature request to be able to paste in place relative to the global rulers.
And I do think this is an oversight which may have been deliberately done as it is possible that it might cause a problem at the moment to paste according to the global rulers and refcous back to that artboard, I can see where this might be a delicate coding issue and instead of a crash it would be better not tyo have it at all as I doubt many people would work this way.
I think most people would work in a more organized way and want to keep track of what they are doing in a more conscious way and simply select the layer they want in the layers paneleven if it might be slower it would also be less prone to pasting on the wrong layer.
We also just had some one post about selecting an object on the canvas and dragging the selection dot in the laayers panel to the layer they wandted it now to reside.
They claim that is faster cut and paste, they actually said it did not work but it does.
Here's the link to the feature request page.
https://www.adobe.com/cfusion/mmform/index.cfm?name=wishform
Don't be surprise if they change this behavior and there are many users who do not like it.

Similar Messages

Cut and Paste between Events not working

Using iPhoto11, I can drag and drop pictures between events, no problem...but Cut and Paste does not work.
I select a photo and cut in event A, go to event B, I right click and get a PAST button, It even clicks but nothing happen, the Cut image never gets pasted.
Is this a bug? whats the solution?

To delete the test user, go to the black apple menu, click on system preferences, then on accounts. From an administrator account, click on the "test" user and hit the "-" key. when the dialog box comes up, hit "delete the home folder" and it will be gone.
For the startup disk issue you should repair permissions. From the finder, click on the "go" menu, then on "utilities". Select disc utility. Select your HD and click on repair disk permissions. This will take several minutes (5 or more).
If that has not done the trick then you may need to reset the parameter ram (PRAM). Turn your computer off. When you turn it back on, simultaneously hold 4 keysL command-option-p-r. Keep holding them. The startup chime will ring. Continue to hold until you have heard the chime at least 2 times (more won't help or hurt). Then release.

Cut and paste IPAD 2 not working

Ipad 2 cut and paste feature not working-- what's the fix? reset did not work

To delete the test user, go to the black apple menu, click on system preferences, then on accounts. From an administrator account, click on the "test" user and hit the "-" key. when the dialog box comes up, hit "delete the home folder" and it will be gone.
For the startup disk issue you should repair permissions. From the finder, click on the "go" menu, then on "utilities". Select disc utility. Select your HD and click on repair disk permissions. This will take several minutes (5 or more).
If that has not done the trick then you may need to reset the parameter ram (PRAM). Turn your computer off. When you turn it back on, simultaneously hold 4 keysL command-option-p-r. Keep holding them. The startup chime will ring. Continue to hold until you have heard the chime at least 2 times (more won't help or hurt). Then release.

Cut and paste functionality does not work

hello,
i did upgrade to quicktime 7 pro on windows xp.
I do now have selection possibilities and export possibilities but i'm unable to cut and past selections. Functionalities stay grey in my menu. I did read the manual, followed the steps (made a selection) but still nothing.
When i make a selection it doesn't export my selection only eather, it exports my whole movie, the same with saving?
any idea here? It's urgent. thanks, wendy

QuickTime Pro can't edit muxed file formats (MPEG 1 or 2 and Flash).
Use MPEG Streamclip (free) to edit your .mpg files.

Pages iPad Cut and Paste not working right in latest update

First -- everything on my iPad is up to date with iOS and Pages update...and everything has been rebooted and works just fine...
BUT -- new problem...anytime I select a paragraph and cut and paste, it places it in a text box, resizes it, and inserts this text box into the document where I paste. That then remains as it's own section and not a part of the larger document.
Did something go wrong? Did I miss some setting to turn off? I don't want anything I copy and paste to be put in its own text box, merely to paste it into the same document in a different place.
What went wrong here?....

If you want to paste text in with other text, you need the cursor/caret to be in text when you paste (keyboard should be up on screen). Sounds like you do not have the keyboard up, so it's creating a new text box for you.

Cut and paste in notes?

How can I enable the cut and paste option in Notes app on my iPhone. Seems to have disappeared. I can only select, select all or copy. Help!

John,
I agree that note field will accept more than 255 characters. May be in my comment i have written "Both" that is confusing. Limit is only for text column.
Some time note field may give some issues refer to http://support.microsoft.com/kb/169726
kirtesh

While using marquee tool to cut and past section to new layer, outline stays transparent

Hello,
I am testing the trial version of Photoshop CS5.5 and I am experiencing a weird issue while using the marquee tool while selecting a portion of an image, cutting that section and pasting it to a new layer.
First off I am running Windows 7 Ultimate 64 bit, 2.8Ghz Dual Core Processor, 4 Gigs Memory, 2 Gig Video card and current on updates with a fresh vanilla install of CS5.5. Not filters or plugin installed.
Step by step of issue is as follows,
I take an image on layer 1 and while using the marquee tool select and area on that image. I want to cut and Past In Place that selection on a new layer, layer 3.
This will allow me to insert another layer, layer 2, in between layer 1 and layer 3 and show what ever I place on layer 2 but still have a complete background if the image does not fill the entire transparent section.
A good example is a wanted poster. You have your picture frame with the Wanted letters and reward. In the center you have a transparent square. In the back you have a black background. In between the frame and the background you place a face. The face will not fill the entire sqaure so you will see some of the black back ground.
Now the problem appears to be that the dotted line of the marquee selection makes so you can see your selection stays transparent or deletes the ares directly unter it when you cut and past to a new layer. The transparent outline looks to be the same size of the dotted line when that selection is selected. I have looked and searched for this promblem and resolution but can not see one.
The picture below is the result after I deselect the area. You can see just above another section that I tried to cover up but did not get it all.
This is driving me nuts and I just can not figure out what is causing this behavior. If I try and stretch the section, it skews the contents out of proportion.
An suggestions or information would be greatly appreciated!
Marquee Selection, Animated Lines Cut And Past In Place And Selection Deselected
Thanks

Instead of cut, one way is to duplicate the layer and add a layer mask from the selection. Alt click on the layer mask icon at the bottom of the layers panel to add a Layer Mask>Hide Selection.
Then you can put a layer in the middle.
The reason your seeing what's in your screenshot is the selection is anti-aliased,

I can't cut and paste and the mac doesn't see me as the admin

Okay so here are my current frustrations and issues:
1. I can't cut and paste anything! Not from emails, not in documents, nothing.
2. I went to make changes in the utilities and when I started, under my name, it said admin and now it says standard and the computer won't allow me to make changes. I try to enter my name and password and the computer says I am not the admin.
3. I can't delete the "test" user and "guest" user because apparantly there is no admin.
I have rebooted using the install disk and I was able to change the passwords but I still can't get in as the admin.
Is there a way to override this before I a) pull out all of my hair, my husbands hair and the hair belonging to my cat and/or b) before I throw the machine out the window and then have another frustration that the unit is not working?!

First back up all your data, if you haven't done so already.
Boot in safe mode (shift key down at startup) and check to see whether the clipboard now works. If it does, reboot as usual (not in safe mode) and try again.
Next, boot in single-user mode by restarting the computer and holding down the Command and S keys at the chime, until you see white text on a black background. Wait for the text to stop scrolling, then follow the instructions on the screen, which will tell you run the fsck and mount commands. Be very, very careful to type the commands correctly. After you enter the mount command, please enter this:
rm /var/db/.AppleSetupDone
Then this:
exit
The Mac will now boot up as if for the first time. Go through the setup procedure to create a new admin account with the same name and password as the old one.

Does webmail have no copy, cut and paste features?

The automated agent was of no use. My old ATT webmail would let me cut and past using IE or Windows controls, but at least had their own cut and paste commands. Not being able to copy, cut and paste when composing e-mails is a MAJOR hassle.
And if anyone knows how to enable links, HTML, etc, in webmail, please let me know.

What browser are you using? CTRL + C, CTRL + X, and CTRL + V are all working fine for me, and I would assume their equivalent Edit menu commands work as well...
Also, which version of webmail are you in?
If a forum member gives an answer you like, give them the Kudos they deserve. If a member gives you the answer to your question, mark the answer as Accepted Solution so others can see the solution to the problem.
"All knowledge is worth having."

With PS 7 create new Place two objects on the new file then you may cut copy and paste Cs2 create new place two object on the new file Cut is not available how does one cut and paste in new file

With PS 7
create new
Place two objects on the new file
then you may cut copy and paste
Cs2
create new
place two object on the new file
Cut is not available how does one cut and paste in new file

If your using File>Place then photoshop cs2 creates what's known as Smart Objects, which photoshop 7 didn't have.
In photoshop cs2 you can rasterize the smart objects and that should make the Cut function available.
Select both placed layers, right click on the area to the right of the tumbnail and select Rasterize Layers.
If in photoshop cs2 you to Help>Photoshop Help and look under Layers>Smart Objects, that should give you a good overview of what smart objects are.

Urgent help needed - new to Macs, accidently cut and paste over top of photo folder and now no sign of folder or file, no auto back-up in place, how can I restore photos pls

Urgent help needed - new to Macs, accidently cut and paste over top of photo folder and now no sign of folder or file, no auto back-up in place, how can I restore photos pls

Thanks for prompt reply, yes we have tried that but have now closed down the browser we where the photos were.
We haven't sent up time machine, do you know whether there is any roll-back function on a Mac?
Thanks

Can no longer drag or cut and paste links or words from one place to another with new Firefox update

After updating Firefox 19.0.2 to my iMac Desktop 10.8.2, Lion, I can no longer drag or cut and paste anything to anywhere, anymore. Please help. Thanks!

Does this also happen if you try to copy/cut and paste text in a text area like "Post a Reply" on this forum?
Try to reinstall Firefox.<br />
Download a new copy of the Firefox program and save the disk image (dmg) file to the desktop
*Firefox 19.0.2: http://www.mozilla.org/en-US/firefox/all.html
*Trash the current Firefox application (e.g. open the Applications folder in the Finder and drag the Firefox application to the Trash) to do a clean (re-)install
*Install the new version that you have downloaded
*https://support.mozilla.org/kb/Installing+Firefox+on+Mac
Your profile data is stored elsewhere in the Firefox Profile Folder, so you won't lose your bookmarks and other personal data if you uninstall and (re)install Firefox.
*http://kb.mozillazine.org/Profile_folder_-_Firefox

Cut and paste from text field not working in early access JRE 1.90-ea-b38

I noticed that cut and paste no longer works with JRE 1.9 on Windows 7 professional. Anyone else having that problem?
I haven't posted a bug reports since the Sun days, is there still a place to post bugs?

Which advice didn't I follow?1) How to write a simple SSCCE.
Again why do you have a custom TableModel? It is not required for the SSCCE and in fact is not required for your real program.
Why is KeyListener code included. It has notthing to do with your question.
2) I also suggested you add the mouse listener to the text area. Well, the text area is defined in the popup dialog, not the editor in my original SSCCE. So why have you made the code so complex by defining a second text area?
I did look at your sample program (the table with pop-up menu appearing on right-click) That was only a wild guess because you didn't respond the second time when I asked you why the mouse listener wasn't added to the text area.

I synced with a new computer. Lost apps, reinstalled, had docu in an office2HD app when reinstalled, but will not cut and paste?

I synced with a new computer, lost apps. Reinstalled and office2HD had all docs still in, but now I can not get the cut and paste feature to work? Also had problems with Gmail account and deleted and created new, so not sure I can download the app a 3rd time?

Two ways.
- You can sync with the new computer by following these instructions
Sync Your iOS Device with a New Computer Without Losing Data - How-To Geek
All the apps have to be in the iTunes library so the app data will have a place to go.
- Or just restore from iCloud backup. That will also pull down the apps from iCloud. Your apps data will also be restored.

Copy text frames and paste in place from source file to opened docs

Hello All,
I have one source indd file which is having 10 small text frames (40pt square) in both pages (Facing pages, Left and Right) on a master page. In that master page there is no frame except that 10 small text frames and the text frame contains the paragraph style called "Cat_Cont".
I have opened some files and I want to copy that 10 small text frames from the source file and paste in place into the opened InDesign Docs master pages. I hope while copying that text frames, paragraph style also would copy. Could anyone help for this, please?
If anything not clear plz let me know.
Thanks in Advance,
Thiru

Use TextFrame.duplicate()

Cut and paste in place ... not in place

Similar Messages

Maybe you are looking for