Cut and paste IPAD 2 not working

Ipad 2 cut and paste feature not working-- what's the fix? reset did not work

To delete the test user, go to the black apple menu, click on system preferences, then on accounts. From an administrator account, click on the "test" user and hit the "-" key. when the dialog box comes up, hit "delete the home folder" and it will be gone.
For the startup disk issue you should repair permissions. From the finder, click on the "go" menu, then on "utilities". Select disc utility. Select your HD and click on repair disk permissions. This will take several minutes (5 or more).
If that has not done the trick then you may need to reset the parameter ram (PRAM). Turn your computer off. When you turn it back on, simultaneously hold 4 keysL command-option-p-r. Keep holding them. The startup chime will ring. Continue to hold until you have heard the chime at least 2 times (more won't help or hurt). Then release.

Similar Messages

Cut and Paste will not work

I have a Toshiba Satellite/Satellite Pro C50-A series laptop I bought new in December 2013. It has Windows 8 on it. I did the upgrade to windows 8.1 almost immediatley so I cannot remember if my control c / control v, cut and paste worked in 8 or not. But it will NOT work in 8.1 for most of my programs. I desperately need it to work on my All My Movies database software from Bolide software and my Green Eclipse sticky notes. And cut and paste will NOT work AT ALL for those programs. It works sometimes for my email and my Apache Open Office word processor.
I have contaced microsoft who's tech did something Tuesday morning to get it working. But then I booted down my computer and went to bed and when I booted it up, yep, no more cut and paste ability again! So I tried contacting microsoft this morning around 2:30am and they said it was an OEM problem and to contact Toshiba.
I have even run a sfc /scannow twice and get the same error message:
sfc /scannow      ran 1/22 1:30am
results: windows resource protection found corrupt files but was unable to fix some of them. details are included in the CBS.Log windir\Logs\CBS\CBS.log
for ex c:\windows\Logs\CBS/CBS.log
note that logging is currently not supported in offline servicing scenarios
The above error message I WAS ABLE to cut and paste FROM my green eclipse sticky note to this forum! But when I tried to cut and paste this message back to a NEW sticky note......NOTHING!
I hope someone here can provide a permanent solution to fix this! It may seem minor but I do a LOT of cut/pasting!
frustrated!!!!
lisa

There are dozens of possibilities, Lisa.
Which C50-A do you have? There is a label on the bottom.
What security applications do you have installed? Webroot is a common offender.
Do you have Microsoft Office installed? If so, which version?
Do you use Bluetooth?
Did you upgrade to Windows 8.1 properly, following carefully the instructions here?
   How to Update from Windows 8 to Windows 8.1
Find a situation that always gives you trouble, so that know when we learn something.
Then see if that trouble occurs after a clean boot.
   1. Open the System Configuration utility (msconfig.exe). You can do that by typing msconfig at the Start screen and pressing Enter.
   2. On the Services tab, set the Hide all Microsoft services check box and then click Disable all.
   3. On the Startup tab, click Open Task Manager, right-click and disable each Startup item. Then close Task Manager.
   4. Back on the System Configuration screen, click OK, and restart the computer.
-Jerry

In SharePoint Document Library Cut and Paste option not working correctly.

Hi,
I have a SharePoint Document Library which has the following.
Folder1 which contains two files named as a File1 and File2
Folder1 ------------> File1 & File2
Folder2 has no files.
Now i am cut the file "File2" from Folder1 and paste in to Folder2.
Issue is "File2" not permanently remove from "Folder1". It is retaining in "Folder1" It self.
Can anyone tell me. What is the issue in it?
Regards
Poomani Sankaran

Hi Poomani,
According to your description, “File 2” still exists in Folder1 after it is been cut and paste to Folder2.
Can you provide more details about how you perform the operations?
I tried to move the file between folders in a library in the two ways below, both work without issue:
1. “Open with Explorer”: cut and paste the file in the Windows Explorer interface;
https://support.microsoft.com/kb/2629108?wa=wsignin1.0
2. In the “Site Content and Structure”, use the “Move…” feature of a library;
https://support.office.com/en-za/article/Work-with-site-content-and-structure-30fcaad9-02b1-4347-8b03-e1ccc5a4c19f
Feel free to reply if there any progress.
Best regards,
Patrick
Patrick Liang
TechNet Community Support

SQL DEVELOPER cut and paste does not work, slow and cannot work fast.

I have lots of difficulties using SQL Developer, the cut/paste does not work properly, when I type search in he code editor it just paste or type the test in the source code not in the serach box. Very hectic I'm pallning to swicth to TOAD until they a a good version.

Hello Aukhez,
I'm sorry to hear that you're having problems with SQLDeveloper - personally, I've never had any problems with cut/copy/paste and searching, and I've been using SQLDeveloper from v1.0 to the current version, on practically every version of the JDK from 1.5-1.6u16 on both Windows and Linux.
Sorry to state the obvious, but perhaps if you could provide a bit more specific information - such as platform, version, etc - and details of what you tried to do, someone here might be able to help...? Regarding speed, there are quite a few things you can do to make this better, but again, without knowing your setup, it's hard to give you proper directions. Plus, you'll find numerous threads here and on google about what you can do to improve speed.
Regards,
John

Cut and Paste doesn't work in lots of apps

I was surprised that cut and paste does not work in Twitter, in App descriptions and other places. It's nice that it works on web sites and email text, notes, etc. But, am I wrong about this?

herbmann wrote:
I don't understand your reply. I am able to copy and paste from web sites without any problems.
That's because cut and paste to a web page isn't the same copy and paste from it. Your first post (and the title of this thread) referred to +cutting and pasting to+ a twitter web page.
You can copy text from anywhere, but you can +cut and paste+ only to editable fields.
Message was edited by: modular747

Copy and paste buffers not working correctly in iOS 8.1m

Both iPads2's in my family arsenal are exhibiting what I believe to be a bug in the iOS8.1 (perhaps corrected by 8.1.1?), in the cut/copy & paste buffer stack.
When invoking the operation to copy and paste data from one application to another, the paste action consistently selects the previous (e.g., stack level 2 rather than 1 or Top) data as what is to be pasted.
In other words, if you have used the copy and paste routine twice, the second pasting will supply one with the paste data from the first operation, rather than the desired data from the second copy and paste operation.
Copy and paste appears to work correctly from within a single application, but consistently fails when copying data from one application to another.
Does anyone know of a work-around for this bug? Is it a bug that others have identified? Is there a new selection filter menu option for copy and paste operations, and what method is used to invoke the menu?
I hope this is addressed soon, as I use Cut/Copy & Paste operations extensively (I've already had Carpal Tunnel Release surgery once and don't relish a repeat performance, no matter how successful the first was in correcting the damage).
Any clues as to what's going on here?
thanks in advance,
labernache

All you can do is simply see if iOS 8.1.1 helps you with this. With some people it has, and others it has not. I would also recommend doing a clean install of your system, too.
Follow this procedure for a Troubleshooting Methodology ... basically reset to factory default condition -BUT- be sure to do the following methodically and also to follow the part with Apple Support!
First you want to make sure you have several backups of your data and done with a couple of "different" sources. Be sure to understand what data is backed up and what is NOT on iCloud Backup and iTunes Backup. Use a variety of methods for backup ... you might check into Dropbox, in addition to your Apple options.
Then turn off your desktop anti-virus software when using iTunes for this reset to factory default. After you do that reset, then leave your iPad in its factory default state and see how it operates then. If you encounter any problems in that factory default state, then take it to Apple Support, and let them know that you have just reset it to that state with iTunes and have not put any of your data back on and it is operating in this fashion (whatever the problem is) in that pristine state. Make sure you keep that trouble ticket number, because if it has to be escalated through Apple Support, you're going to find all communications tied in with that number. If the lower level help isn't able to help you, then escalate it to a higher level to examine the problem. Keep at it with that trouble ticket number until Apple Support arrives at a solution to that problem. Be methodical and keep at it.
On the other hand, if everything is okay with the factory default condition, then restore your backup. Some people have discovered that the problem resides in the apps or something in the restored backup. If that's the case, then it's going to be trying and difficult to find out which developer's app is causing you the problem. And ... it's true ... that a developer not following Apple's instructions and guidelines for his app can CAUSE YOU TROUBLE. This kind of thing does happen from developers, especially when a new system upgrade comes out, because some developers ignore what Apple tells them about changes coming, and what they do BREAKS SOMETHING.
This is a troubleshooting methodology that you are going through. See it through to the end.
Choosing an iOS Backup Method (Should I Use iTunes or iCloud to back up ...)
https://support.apple.com/kb/HT5262
Back up and Restore your iOS Device with iCloud or iTunes
http://support.apple.com/kb/ht1766
iTunes: About iOS Backups
http://support.apple.com/kb/ht4946
Create and Delete iPhone, iPad and iPod Touch Backups in iTunes
http://support.apple.com/kb/ht4946
iOS: Troubleshooting Encrypted Backups
http://support.apple.com/kb/TS5162
Use iTunes to Restore your iOS Device to Factory Settings
http://support.apple.com/kb/ht1414

Trying to cut and paste . firefox not letting me paste a file from microsoft word to another application

working on a new website .I want to cut and paste information from microsoft. firefox is not letting me.

How is Firefox involved in "microsoft word to another application"?

Is it possible to export my contacts? if so how? cut and paste does not help as all i need is the name

all my contacts have cell phone numbers next to their name. i would like to print a list of only this field. How do i do this? i tried to cut and past to Excel but it not a "clean fit" and is more trouble than it is worth. is there an easier way?

Firefox does not have a contacts list. Any contacts list will be part of a website that you are using, you need to contact the support for the site to see if they have an option to export the contacts.

Cut and paste in notes?

How can I enable the cut and paste option in Notes app on my iPhone. Seems to have disappeared. I can only select, select all or copy. Help!

John,
I agree that note field will accept more than 255 characters. May be in my comment i have written "Both" that is confusing. Limit is only for text column.
Some time note field may give some issues refer to http://support.microsoft.com/kb/169726
kirtesh

Copy and paste is not working

Hi,
I am using Windows 7 Enterprise Edition 32 bit with Service Pack1 Copy paste is not working frequently. Please help me to solve the issue.
Regards,
Boopathi S

Hi,
What do you by "I used CTRL+P to paste"? As I know, we usually use copy\paste with ctrl+C\ctrl+V.
More information would be helpful.
Anyway, if this issue only happened in IE, then what is the result is we copy something with right-click\Copy?
You can also launch IE in add-on mode to tset this issue, click "Start", type "internet", then click Internet Explorer (No Add-ons).
Meanwhile, clear browser history\caches\cookies, etc. Tools\Internet Options\General\Delete...
Yolanda Zhu
TechNet Community Support

Copy and/or Cut and Paste no longer works from within Firefox yet I can Paste to Notepad and yet again copy the same text from within Notepad or any app will not Paste back into Firefox, thanks

I 'Copy & Paste' from within Firefox quite often but for some reason the function has stopped working when using some sites, even the menu item 'Paste' is greyed out, yet I can open Notepad and 'Paste'. I tried pasting into 'Notepad' then copying from Notepad and pasting back into Firefox, which I've found in the past sometimes works but today even that does not work. I accept it may not actually be a Firefox problem but I have noticed since upgrading to the latest version, I am having several problems with crashing and hanging exceedingly long execution of the browser.

See:
*http://kb.mozillazine.org/Clipboard_not_working

Why am I not able to cut and paste to Microsoft Works anymore?

While using Internet Explorer I was able to copy off the internet and paste into my Microsoft Works word processing. I can no longer do that with Mozilla. I keep getting the answer "it exceeds the size limit" even if it's only one word.

You should be able to view both PDFs and Powerpoint attachments by tapping on them to download them and then open them. Without a separate app you can't then save them on the iPad, but you should be able to open and the read both of them in the Mail app.

Copy and Paste does not work in filter statement of table data

I am using SQL Developer 3.0.04. I can not copy nor paste in the filter criteria when watching or editing table data. Is it a bug or do I have to change some settings?

Hi Sven,
I did a bit more research and now I hope we will be talking about the same thing. Bear with me and let me clarify. In terms of my prior comment about the process necessary to copy a value from a data cell into the clipboard, I was totally off-base. Once the focus is on a data cell, all one need do is Edit menu|Copy or ctrl-c. I have no idea why I had trouble with that yesterday.
Anyway, getting back to what's relevant with regard to your issue:
1) If something is in the clipboard, then both Edit menu|Paste and ctrl-v work for a data cell target.
2) If something is in the clipboard, then Edit menu|Paste fails for a data tab filter target.
3) If something is in the clipboard, then ctrl-v works for a data tab filter target.
So obviously conditions exist where pasting to the data tab filter can work. But here is a scenario where I found a problem similar to what you describe:
1) For the EMP table in SCOTT, display all employees in the data tab.
2) Apply a filter. For example, filter on JOB='SALESMAN'. Now 4 salesman, all in dept 30, are displayed.
3) Next you decide to view only employees in dept 30.
4) Copy the value 30 from the DEPTNO column. Carelessly put the focus on ENAME column in one of the data tab rows.
5) Next focus on data tab filter to blank out JOB='SALESMAN' predicate. Drop down to select DEPTNO. Append an = sign.
6) Finally Edit menu|Paste. Instead of seeing DEPTNO=30 in the filter, we see...
7) The filter contains nothing and is disabled (greyed out).
8) The ENAME column of the prior focus now contains the value 30 rather than the a salesman's name.
Your case may be different/more complex, but at least this simple case demonstrates in a repeatable fashion what I noticed but didn't describe very well yesterday. I have logged the following internal bug:
Bug 12753266 - EDIT MENU PASTE INTO DATA TAB FILTER DOES NOT WORK AND MAY DISABLE THE FILTER
Using the rollback button, blanking out any filter value and hitting enter displays all original employee rows.
Regards,
Gary

Copy and Paste functions not working

I'm using windows 7 and 8. I can copy and paste photos , but when I copy a URL the paste function does not work. It is greyed out.

Hi,
Are you using remote desktop or other similar software? Please attempt to kill the related process, such as rdpclip.exe, etc.
Where do you want paste the URL?
Have you tried composite key Ctrl + V?
Please try running SFC /scannow command to fix some corrupt system files.
Andy Altmann
TechNet Community Support

Scale Attribute Times and Paste Attributes not working as did before

Using Copy and then Paste Attributes as I have done many times before upgrading the FCP 5, the option to "Scale Attribute Times" is grayed out and the keyframes are not placed correctly. This happens even if the cips are the exact same duration. I read a post from November that states that this feature is not working is FCP 5. If that is so, has anybody found a work-around or know of a fix?
Dual 1.25 G4 Mac OS X (10.3.9) FCP 5.0.1

The problem is that the content is replaced correctly but the keyframes move (they were originally at the beginning and end and now they are not). The "Scale Attribute times" box is grayed out.
I just tested this out and, from what I can tell, FCP (5) now needs Timecode to match in order for Paste Attributes > Content (with keyframes intact) to work as we'd like.
I placed a 10 sec image - with (the default settings of) In at 1:00:00;00 and Out at 1:00:09;29 - in the Timeline. I set keyframes for Scale & Rotation at the In and Out points (100% & 0 degrees -> 200% & 360 degrees)
When using the Paste Attributes > Content method with a second image having identical timecode In & Out, it works fine.
However, if the second clip's timecode is not the same - say In is set at 1:00:02;00 and Out set at 1:00:11;29 - then the content will be pasted but the keyframes will not adjust for the new timecode. They remain at the first clip's points (that is,1:00:00;00 and 1:00:09;29).
So, you can try to match timecode (which isn't always convenient) or you can...
Select the first clip & copy
Overwrite/replace the (first) clip with the second clip
Paste Attributes > Basic Motion (or whatever attributes you're pasting, except Content)
Or was that a workflow you were hoping to avoid?

Cut and paste IPAD 2 not working

Similar Messages

Maybe you are looking for