Cut and paste tables and charts from Acrobat Pro 8?

With earlier versions of Acrobat Pro, I could cut and paste charts and tables from .pdf documents into Word. Now that doesn't seem to be working. Help!

Selecting all does not help - the issue is I need a table within an incoming email to be moved to excel, edited and then pasted back into a new email. "Select All" picks up the email headers, signatures, any messages around the table etc so that doesn't work. Also, as pointed out above Excel doesn't have a select all feature to get the tables back into the body of an email.
I just tried again going from Excel into Outlook 2011. No luck. All one column down the left side of the email. All columns are removed and text crammed into one column. Just to check I cut from one Excel document and pasted into another and it retained all formating just fine. It is only in and out of Outlook that seems to be the issue.

Similar Messages

Printing difference from acrobat pro or acrobat reader

Hi,
I noticed when i maken pdf files from inDesign ansd print from my computer the fonts are printed fine and sharp (from acrobat pro) but when other people are printing the documents from the reader version the fonts aan kinda blurred and grainy..
I first thought fonts were nog embedded right, but that's not the issue.. The pdf says it's embedded just fine, and eve with the font installed locally it doesn;t make a difference..
For the rest the computers are installed the same and printer settings are equal. The only difference is i have installed the CS5 package on my machine and the rest doesn't.
Is there a difference when printing from the acrobat reader?

Hi,
I noticed when i maken pdf files from inDesign ansd print from my computer the fonts are printed fine and sharp (from acrobat pro) but when other people are printing the documents from the reader version the fonts aan kinda blurred and grainy..
I first thought fonts were nog embedded right, but that's not the issue.. The pdf says it's embedded just fine, and eve with the font installed locally it doesn;t make a difference..
For the rest the computers are installed the same and printer settings are equal. The only difference is i have installed the CS5 package on my machine and the rest doesn't.
Is there a difference when printing from the acrobat reader?

Cut and Save from a PDF

How can I cut and save from a PDF adobe document?

You can use Adobe Reader to cut/copy/paste text into another program. Or, if you're using the Create PDF online service you can use the Export to PDF or Word command to save your file in another format.

I switched to mountain lion and from Acrobat pro 9 to 10. now safari will not open pdf files. acrobat preferences says it is trying to use version9 to open and i removed version 9. any ideas?

I switched to mountain lion and from Acrobat pro 9 to 10. now safari will not open pdf files. acrobat preferences says it is trying to use version9 to open and i removed version 9. any ideas?

Make sure you have updated Acrobat X to the latest version 10.1.3. They updated the PDF plug-in in 10.1.1: http://kb2.adobe.com/cps/837/cpsid_83708/attachments/Acrobat_Reader_ReleaseNote_ 10.1.1.pdf#page=4

Download and re-install Acrobat Pro on a MacBook Pro

When I left my former employer, Pollinate Agency, I bought a MacBook Pro with Acrobat Pro (version 9 or possibly 9.5) installed from the company. I recently had a serious computer crash, and needed to get all contents erased. The support provider didn't have my product key, so could not reinstall Acrobat Pro for me. Since then, I have gotten the product key sent to me from my former employer. So I need help in re-downloading, installing and activating the Acrobat Pro software on this computer.

Hi ecribbs1411
Download the Trial from Adobe.com and run the Setup to install it ,....
To know more , please let me know your OS and what Acrobat version you want to install ?

FrameMaker 8.0p277 and printing to Acrobat Pro 8 & 9

All this year (2009) I've been working on several contract documents using FrameMaker's conditional text facility.
FrameMaker is 8.0p277 and the OS is Windows XP Pro SP3.
In May the old workstation became cantankerous so I updated to a new HP xw4600 with a Quad Core, 4GB ram, and 2 x 250GB SATA disks. Cool!
I applied all the MS updates and then treated myself to a clean install of Adobe Design Premium CS4, then installed and updated FrameMaker 8.0 (without the PDF Maker). The Adobe Acrobat Professional 9.0 in CS4 was patched to 9.1.2.
If I open a document in InDesign CS4 and print it to the 'Adobe PDF' printer everything works just fine. Same for Illustrator CS4.
But FrameMaker fails with this message:
... followed by:
I have also attached the most recent FrameLog fiole...
Howsomever, if I print the same document to my HP laserjet 4300dtn (or the laserjet 5200 or the FujiXerox DocuPrint 2100) it works just fine. So I assume the document itself is OK.
If I select the printer to be one of the 3 above and then print to file (and create a .PS file), and then open it in Distiller 9.1.2 it produces a perfect .PDF file (shades of Acrobat 3 and the watched folders here!). But, if I select AdobePDF printer as my output device before generating the .PS file, Distiller reports parsing errors and does not produce output.
With a doffed hat to Arnis and Dov I refrained from trying 'save to PDF'
This looks like a corrupt printer driver...
After talking to Adobe Support (ID 121 702 309) I have tried each of the following (and then re-run my testing cycle as outlined above):
Running the 'Repair Acrobat Installation' process from Acrobat Pro 9.1.2.
Setting Acrobat PDF as my default printer (strong whiff of "eyes of a bat and wings of a newt" about THAT suggestion).
Un-installed and then reinstalled Acrobat Pro 9.1.2.
Un-installed and reinstalled FrameMaker 8.0p277.
Un-installed and then reinstalled Acrobat Pro 8.1.4.
Un-installed and reinstalled FrameMaker 8.0p277.
Sworn loudly.
Anyone have some ideas / fixes / incantations???

Hi Laurence,
If you can produce PDFs from the AdoebPDF via ID and AI by printing, then I'd suspect that the driver is probably ok. (Note: from ID and AI, it is better to SaveAs PDF, since these have their own internal PDF generation capabilities.)
Also, with FM8, if you're making interactive PDFs (i.e. not for press), then it is ok to do the SaveAsPDF route, since FM has some post-processing modules that kick in to clean-up the .tps file prior to handing it over to Distiller. So, the process is no longer is identical to printing to file and distilling.
On the FM side, make sure that the tagged PDF setting is turned off in your PDF setup and have the setting for generating named destinations for all paragraphs enabled.
You also might want to download Sundorne's SetPrint ( http://www.sundorne.com/FrameMaker/Freeware/setPrint.htm ) utility to ensure that you always have the same printer instance (AdobePDF) enabled when you start FM.
Have you also applied the MS hotfix for the PDF font issues? Details are available here: http://blogs.adobe.com/techcomm/2008/07/hotfix_for_framemaker_1.html
Last desperation move would be to create a new custom PDF printer instance using the Distller PPD and a copy of the AdobePS installer.

I have acrobat pro on my lap top and recently installed acrobat pro on my Mac Mini, but the text recognition function is not working, does anyone have any advice on how to remedy this problem?

I have acrobat pro on my lap top and recently installed acrobat pro on my Mac Mini, but the text recognition function is not working, does anyone have any advice on how to remedy this problem?

On my laptop when I open up a pdf file and do a search for a particular
text phrase it prompts me to run a character analysis. Whereas on my mac
mini, when I try to engage the same process it just says it couldn't find
the phrase and doesn't even try and run a character analysis. I tried
clicking on the tool bar and the recognize text tab but nothing there seems
to do anything.
In trying to figure out the issue on my own I noticed one thing. I run a
small law firm in St. Louis and I scan in all my files to which are
subsequently emailed to my outlook account where I will save them as pdf's
to their respective folders. On my laptop when I open up an email from my
scanner I see the image of a acrobat document next to the attachment
paperclip symbol. However, when I open up the same email on my mac mini I
notice instead of an acrobat file image it shows a Preview file image (the
program used to open up pdf's before I installed acrobat).
Hope this helps!
Sincerely,
Jonathan McAllister

How can I resize a pdf page content with annotations and highlights in Acrobat Pro?

How can I resize a pdf page content with annotations and highlights in Acrobat Pro while maintaining page size and annotation/highlight interactivity? I've tried to use the crop tool in Acrobat Pro (9) and the page does resize, but the highlights and annotations go all over the place. I specifically need to scale the page content smaller (83%) but maintain page size and annotation/highlight to content connection and interactivity.

An old trick (not recommended) would be to print to a new PDF with the page size selected but a scaling of the content. Only print the document, not the markup, to a new PDF. Close that PDF when done and reopen the old one (or maybe a copy of the old one for safety) and use Document Replace pages and select the new document to replace your current pages. You will then have to go back through the markup to locate it all correctly. There may be a more elegant way, but this may be the fastest.

How to sync contacts and calendar from macbook pro to ipad 2?

How do I sync contacts and calendar from macbook pro to ipad2?

I have the same problem and have not been able to get contacts transferred from my MacBook Pro to my iPad 2. I have checked "sync contacts", when it does the sync it says it is syncing contacts, but the address book on the iPad remains empty. I tried checking the box under "advanced" that says to replace the contacts information on the iPad, sync again, same result—an empty address book on the iPad. Any suggestions?

Can I load Acrobat Pro 6 onto Windows 7 and upgrade to Acrobat Pro 9?

Can I load Acrobat Pro 6 onto Windows 7 and upgrade to Acrobat Pro 9? My former PC ran on Windows XP and this new PC runs on Windows 7. I don't want to shell out another $449 when Acrobat Pro 9 worked fine for me.

You might be able to install Acrobat 6 for this purpose, but you probably won't have to. When you install Acrobat 9 Upgrade it should (if I remember right) ask for the serial number of your "qualifying" product and at that point you put in the Acrobat 6 serial.

Pushing and pulling from Premiere Pro CS 5

Hi,
Recently, I came across a problem and I was wondering if you could confirm this is a limitation within Production Premium CS 5 or whether I am doing something incorrectly?
If I render a sequence within Premiere Pro and push it to Encore via Adobe Dynamic Link, the rendered sequence correctly shows its rendering within Encore. However, if I render my sequence, save, and exit from Premiere Pro and then start Encore and pull the sequence from Premiere Pro via the Adobe Dynamic Link, I don't necessarily keep the rendering. I know that this has happened when using a 64-bit plugin from a third-party. The sequence shows with a watermark as if it had never been registered. The problem further manifests itself by, when I restart Premiere Pro, while the rendering looks intact, if I click on the third-party plugin as if to modify it, it won't let me make changes until I delete the already rendered sequence. It seems like somehow, the sequence has become corrupted.
Any thoughts - is this a known problem? Has this been addressed with CS 5.5? Are there plans for this to be addressed? Is there a workaround?
Thanks,
Steve

JSS1138 wrote:
The pros are faster encodes with superior quality. I use the free HC Encoder for MPEGs. You'll also need Avisynth to use it. The process is somewhat cumbersome, but if you have the time and want the quality, it's noticeably better, in my opinion.
To add to this, I've been producing commercial blu-rays using the free x264 encoder. The quality is unmatched by any commercial encoder, however there are some features absent that some commercial producers need (such as the ability to directly place I-frames, re-encode a section of GOPs with different bitrate targets, etc. which commercial encoders like CineVision can provide). If you don't have any need for those, x264 is the way to go. As quality is more important to me than bitrate, I use the single-pass constant ratefactor "--crf" mode with something better than the default, like 18 or 16, and it has never let me down.
Just be prepared to wait a while if you have a longform project. x264 is very fast, taking advantage of multi-core machines, but it cannot utilize the GPU/CUDA for encoding. A 3.5 hour 720p60 project (over 750,000 individual frames) at maximum quality takes a full 24 hours to encode on a 3.2GHz core i7, with all hardware threads at 100% (so make sure your machine is stable if it is overclocked!).

I just installed CS 6 and now my Acrobat Pro is crashing. I marked several spots to redact and when I applied the redaction, it crashed and produced a report. How do I get it to stop crashing.

I just installed CS 6 and now my Acrobat Pro is crashing. I marked several spots to redact and when I applied the redaction, it crashed and produced a report. How do I get it to stop crashing? I am on OS 10.9.4

Report the problem to Adobe Acrobat Support along with sample PDFs and detailed description of the steps you perform.

Color printing From Acrobat PRO 9.0

I am trying to print in color from acrobat pro 9.0 but i get only black & prints.
I found out from previous post that i have to diable the color management. I can change it from File->print->advanced->color management but I am not abe to save it.
does anybody have the same issue?

Have you tried going back to the default print settings in the Print dialog under the Advanced button and select Acrobat Default under the Settings dropdown?

Can't Duplex print from Acrobat Pro 9.3.2 to Epson Artisan 800

I can not duplex Print from Acrobat Pro 9.3.2 to an Epson Artisan 800.
I an running it from a MacBook Pro with OSX 10.6.3
I called Epson support and they could not help me.
However they suggested that I try using Adobe Reader.
Well that works OK if I choose to print the document as an image, but I would prefer to just be able to work within Acrobat Pro.
Does anyone outthere have any settings within Acrobat Pro that would enable duplex printing?
Thanks
Dunc

All this is totally different Screen (I use a HP DJ 990cse) This sort amplifies Larry's Answer:
Every Printer is setup naturally different.

HUGE BUG printing Booklet from Acrobat Pro 11.0.10

I spent an hour chatting with Adobe support in India. They could not solve this issue.
I submitted a BUG REPORT at Adobe - Feature Request/Bug Report Form
Here is the BUG Report:
******BUG******
Concise problem statement:
Steps to reproduce bug:
1. Export individual pages from InDesign as pdf (16-page booklet, each individual page is 5-1/2" x 8-1/2")
2. Open pdf in Acrobat Pro 11.0.10
3. Choose actual size, then choose booklet, and print. (printer contains letter-size paper, and page set-up is set to 100% scale.)
Results: The printed booklet is the WRONG SIZE! The pagination is correct as usual, but each individual page is being REDUCED, and now each page image is too small, and there is now a GAP between pages, and the entire booklet is useless. If you can, please see case number: 0186447426: support chat: it covers everything we have tried so far ... (We tried everything they could think of, but all attempts failed.) This bug was introduced somewhere along the line with Yosemite.
Expected results: As usual, when printing booklets from Acrobat Pro, we expect the print to be the right size, the same size as the InDesign doc, and as it has been printed previously by Acrobat Pro prior to Yosemite. Thanks for fixing this disaster of a bug. Please contact me if you need further info, copies of the individual page pdf, etc.
I am literally stuck. I can go through the laborious process of using InDesign to "print booklet" to a postscript file and use Distiller to make the booklet pdf, but under Yosemite, I am prevented from installing print drivers unless that printer is locally available on my network. Unfortunately, the printer is located at my client's place of business.
I realize there is typically a leap-frog effect between operating system updates, hardware, and application updates, but combined with other Yosemite issues, this Acrobat Pro bug is killing my business.

DrStrik9 (sounds a bit poisonous to me!),
The issue, regrettably, is that Acrobat is performing as designed. And it has nothing to do with either MacOS 10.10 or anything new or different with Acrobat 11.0.10 (versus earlier versions going all the way back to the initial implementation of the booklet printing feature). And this isn't directly a printer driver issue, either! The same behaviour occurs both on MacOS and Windows.
The problem, simply stated, is that the Booklet print option in Acrobat (and Reader) is attempting to avoid loss of content due to the paper's non-printable margins. The scaling factors in the Size print option are not utilized at all in the Booklet print option. The Booklet print option attempts to fit two logical pages of your PDF file into the printable area of each physical sheet of paper. Assuming that your printer's Letter page is defined as having a printable area of 8"x10.5" due to a 0.25" non-printable area surrounding the page, then the Booklet print option will force each of the 5.5"x8.5" pages of your PDF file into a 5.17'x8" area centered on each half of the 8.5"x11" printed sheet.
There are three workarounds that I know of:
(1)    Many high end printers have booklet printing capabilities in the printer or printer driver itself. Check the detailed driver options to see whether in fact your printer / printer driver does support a booklet printing option. If so, try that first. That would likely solve your problem.
(2)    Assuming that this is a PostScript printer, edit the .PPD file for the printer you are using to to modify the specification of the Letter printable area. In the PPD file, you will see an entry similar to this:
    *ImageableArea Letter/Letter: "18 18 594 774"
or
    *ImageableArea Letter/US Letter: "18 18 594 774"
Edit the entry to change only the four numbers as follows:
    *ImageableArea Letter/Letter: "0 0 612 792"
That indicates to the PostScript driver that there is no unprintable border on your pages. Then save the .PPD file. I would then suggest rebooting and then trying to print. Note that the side effect of this is that Fit and Shrink oversized pages options will not take into account the non-printable area of your printer.
Note that a similar hack can be done with Ledger (i.e. 11"x17") page descriptions in the PPD to fix a similar issue affecting printing 8.5"x11" pages to 11"x17" sheets as booklets.
(3)    There are some very reliable third party plugins for Acrobat that provide full advanced document imposition capabilities, creating what are known as printer flats as a new PDF file from your logical pages. There are n-up, booklet, step-and-repeat, etc. options galore in such packages. Examples include Quite Imposing and PDF Snake. I have personally used Quite Imposing for nearly 15 years for this purpose and can vouch that it works beautifully. I don't have personal experience with PDF Snake, although it is less expensive.
Good luck and let us know if any of this helps you at all!
          - Dov

Cut and paste tables and charts from Acrobat Pro 8?

Similar Messages

Maybe you are looking for