Cut and Paste Text From My Browser

Hello,
I would like to cut and paste certain text or images from web pages....can I do this?
Thanks,
VeePee
Nokia 3395
Nokia 6600
Nokia N95 8GB
Nokia N8 (Anna)
Nokia Lumia 930
Solved!
Go to Solution.

Can I make Opera my default browser?
Nokia 3395
Nokia 6600
Nokia N95 8GB
Nokia N8 (Anna)
Nokia Lumia 930

Similar Messages

When I cut and past text from Firefox to Microsoft Works I get an error stating 'Out of memory, close applicantions and restart windows'. This does not work. When I had IE I never had this issue. Help!

When I try to cut and past text from Firefox to Microsoft Works I receive an error that says 'Not enough memory, close applications and restart windows'. This never works! I never had this issue with IE! How can I fix this issue?

If the crashing only happens with other peoples projects it could be for a variety of reasons. There are tons of asset references saved in the library (the location every item was imported from) and much more. None of those locations will exist on your system and internal complications may simply happen, especially with any runtime shared assets.
If possible you should consider adding more system RAM so you can multi-task. RAM is extremely cheap. I'm assuming from a smaller 500GB HD and 4GB RAM that you're probably on a laptop however. Installing RAM is still usually pretty easy if you have the notebook manual (or grab it online). It typically involves just lifting the keyboard or opening a single panel on the bottom of the notebook but it varies greatly. At any rate, 8GB RAM would help you quite a bit. If you do, just make sure you get the correct type of RAM (again, in the specs in your manual).
Even when you run out of physical RAM, Flash (like any other application) will still see more RAM based on the OS's swap memory setting (using available space on your HD as RAM). It will get much slower but Flash should see the total amount the 32bit OS can handle for RAM (it doesn't know if it's physical fast RAM or SWAP (fake) HD RAM though). If you open other apps with Flash they should also operate, but will also use swap RAM and you've probably noticed your HD crunching a lot while more apps are open.
That said, I have a 4GB RAM in my older i7 lappie and have used Flash CS5.5 and CS6 on it extensively, with other applications open. Although my projects contain mild assets and mostly tons of code. No issues at all. I just think your heavy assets are crashing you.
Either way, glad you got your work done. You're welcome and good luck!

How do you cut and paste text from Adobe Reader 11 into Word?

Using Windows 8.1. Recently purchased Adobe Reader 11. Need to cut and paste text from PDF into Word docs. Docs are not locked and content should be available for editing. Have figured out how to highlight the text through the Comment tools, but nothing (right-clicking, going to Edit pulldown) menu gives me a Copy option. How do I cut and paste the text?

Good to know that I got what I paid for with the Export PDF.I just went
into the document that I am trying to cut and paste from and highlighted a
piece of text. Clicked right, checked the Edit pulldown, and then did
Ctrl+C (assuming you meant Ctrl and then C, rather than holding them both
down together). Still no Copy option anywhere.
Properties for the document I am trying to work with do say "Content
Copying: Allowed" under Security. Since I can highlight text, I assumed
that the text is there (not a photo scan) so that I can copy it. Should I
look somewhere else under properties to confirm this?
As I did last night, I also opened up a document that I have cut and pasted
extensively from before-so I know the text is there and manipulable.
Attempted to cut and paste from it, using the same methods above. Again,
no option to copy with any of them.
Perhaps I should clarify that by cut-and-paste, I do mean that I want to
copy the text from the original and then transfer it to a Word doc that I
am writing. I am not trying to do anything with the original other than
copy from it--not cutting anything out of the document itself.
Is there a way to do this with the Adobe 11 reader. At this point, I am
wondering if I need to uninstall Adobe 11 and try to go back to Adobe 10 or
whatever the reader was that was installed on my computer when I bought it
(Dell Inspiron touch-screen laptop purchased in May 2013, if that gives any
idea of which reader might have been installed there. That version did,
however, have some other limitations that made me want to get Adobe 11. Any
ideas about what to do now.
M. Christian Green, JD/PhD
Senior Fellow, Center for the Study of Law and Religion
http://cslr.law.emory.edu/people/person/name/green
Book Review Editor, Journal of Law and Religion
http://cslr.law.emory.edu/publications-lectures/journal-of-law-and-religion/
Website
http://mchristiangreen.com
LinkedIn
http://www.linkedin.com/in/mchristiangreen
Twitter
http://twitter.com/mchristiangreen
On Sun, Nov 16, 2014 at 3:00 AM, Gilad D (try67) <[email protected]>

How do I cut and paste text from a Word doc to my yahoo email?

I am suddenly unable to cut and paste from a Word document into the body of my yahoo email. I never had this problem before, but recently trying to paste my resume into the site 4entertainmentjobs.com, I ran into trouble. I followed your instructions and found my profile folder, but there was no user.js file in there. I created one in text edit and replaced mozilla.org with 4entertainmentjobs.com, but it still didn't work. Today I tried to go back and put Mozilla back in, but I still cannot get it to work. Then I downloaded your add-on "allow clipboard". That did not work either.

Hi Sara. Tanks for responding. If I cannot figure this out (I was up
until 2am last night), I want to cancel my subscription.
Here are two files you can check on/help me with. When I try again, it
comes up 'an error has occurred when trying to access the service.'
Please advise.
Pat Tomassi
In a message dated 11/1/2014 12:55:23 A.M. Eastern Daylight Time,
[email protected] writes:
How do I copy and paste text from a converted Word document?
created by Sara.Forsberg (https://forums.adobe.com/people/Sara.Forsberg)
in Adobe Acrobat.com Services - View the full discussion
(https://forums.adobe.com/message/6888908#6888908)

I can't cut and paste text from online and then transfer it to a word document

Sometimes when I highlight text in a hotmail e-mail, then try to paste it as a word document, it won't paste. The page is left blank. There are times it works and times it doesn't. This is extremely frustrating. I feel like I need to update something or download an add-on of some sort.

https://support.mozilla.com/en-US/kb/Clipboard+not+working

Cut and paste text in FormsCentral

Can I cut and paste text from my clipboard to a form text field? All I seem to get is Null whenever I try.

Hi,
Thank you for contacting us.
You should be able to copy text to the form fields in Adobe FormsCentral, can you please share the screenshot of the error you are getting while coping the text.
Also, please try using a different browser and share the results.
Regards,
Nakul

I can't cut and paste text in any app, between apps, drag drop...

OSX 10.7.2: iMAC 24" FLAT-PANEL/ 2.8 GHz Intel Core 2 Duo/ 4 GB 800 MHz DDR2 SDRAM
I have owned and used my iMac since late in 2008 (although mine is an early 2008 model).
Starting this evening (10 December 2011) I can't copy/paste text from the clipboard any longer. For example, I can't select and copy a URL then paste it in another tab of the same browser. Nothing is pasted.
Dragging and dropping text from one browser window to another also doesn't work, nor from one browser URL bar to another browser bar.
In sum, the most BASIC COPY/PASTING TEXT DOES NOT WORK AT ALL ANY LONGER!!! Drag and drop ditto. Most frustrating!
Anybody else had this problem suddenly come upon them??? Suggestions, advice.
Thanks. Tomeg
====================
p.s. btw restarting the mac or shutting down booting up doesn't get rid of the problem. Next I will try unplugging everything then reconnecting.
Haven't tried resetting PRAM yet. That will be my next and last resort.

Oops! I discovered yesterday that *the real problem with my keyboard was (is) a diagonal "row" of keys isn't functioning*! Unfortunately, the four keys are 'c, d, e, and 3/#'; hence, losing the '⌘-c' or "copy" function.
Still, it helped some that I could employ the right-click with my wireless "magic mouse."
Fortunately I remembered this morning that I had a perfectly good UBS keyboard with keypad from my previous Mac.
A good learning experience! Thank you all for your help!!! (:
Tom(eg)
Message was edited by: tomeg

I have Firefox 6.0 running under Windows XL. When I forward an email with a URL in it, my recipients tell me the URL is not highlighted and they have to cut and paste it into their browser. Why? How can I get my forwarded URLs to be highlighted?

I have Firefox 6.0 running under Windows XL. When I forward an email with a URL in it, my recipients tell me the URL is not highlighted and they have to cut and paste it into their browser. Why? How can I get my forwarded URLs to be highlighted?

If you think getting your web pages to appear OK in all the major browsers is tricky then dealing with email clients is way worse. There are so many of them.
If you want to bulk email yourself, there are apps for it and their templates will work in most cases...
http://www.iwebformusicians.com/Website-Email-Marketing/EBlast.html
This one will create the form, database and send out the emails...
http://www.iwebformusicians.com/Website-Email-Marketing/MailShoot.html
The alternative is to use a marketing service if your business can justify the cost. Their templates are tested in all the common email clients...
http://www.iwebformusicians.com/Website-Email-Marketing/Email-Marketing-Service. html
"I may receive some form of compensation, financial or otherwise, from my recommendation or link."

I cannot cut and paste .rtf from a MS Word document to a web page.

I am running a MAC desktop with version 10.5. I use MS Office for MAC. When I try and cut and paste from a .rtf file to an amateur writing site, I always get a timeout. Help please!

Hi Sara. Tanks for responding. If I cannot figure this out (I was up
until 2am last night), I want to cancel my subscription.
Here are two files you can check on/help me with. When I try again, it
comes up 'an error has occurred when trying to access the service.'
Please advise.
Pat Tomassi
In a message dated 11/1/2014 12:55:23 A.M. Eastern Daylight Time,
[email protected] writes:
How do I copy and paste text from a converted Word document?
created by Sara.Forsberg (https://forums.adobe.com/people/Sara.Forsberg)
in Adobe Acrobat.com Services - View the full discussion
(https://forums.adobe.com/message/6888908#6888908)

I would like to cut and paste information from a word file onto a pdf file, as well as draw lines onto the pdf file. How can I accomplish that task? Is there software I can purchase?

I would like to cut and paste information from a word file onto a pdf file, as well as draw lines onto the pdf file. How can I accomplish that task? Is there software I can purchase?

Hi jgallu7382,
The latter is easily accomplished using the Drawing Markup tools, which are available in both the free Adobe Reader, and in Acrobat. Copying/pasting text into the PDF is something that you could do using the editing tools that are available only in Acrobat. Note, however, that Acrobat isn't intended to be a text-editing application, so editing there won't be as robust as in an application designed specifically for that purpose. (It's also worth mentioning that you won't be able to alter a PDF if it has document permissions applied that would prevent you from doing so.)
I hope that answers your questions.
Best,
Sara

CUT and PASTE text

I am working on my web pages and for some odd reason I can not cut and paste text on my webpages in dreamweaver anymore??? So strange! I used to be able to just CUT from the internet or from my word docs and PASTE paragraphs on my web pages in a Dreamweaver template. Not anymore? Would anyone know the answer to this?

Doing a quick search of the forums (or even looking at the left hand sidebar to see similar problems), there appears to have been / or is a problem with pasting from Word 2008 on a Mac... does that apply to you?
If you were able to paste previously then, this may help:
A lot of unexplained errors in Dreamweaver are the result of a corrupt cache file or corrupt personal configuration file. Go to the Dreamweaver FAQ, and look up "JavaScript and other unexpected errors". Follow the instructions for deleting the file cache. If that doesn't work, try deleting your personal configuration folder.
http://kb2.adobe.com/cps/191/tn_19105.html
Nadia
Adobe Community Expert : Dreamweaver
Unique CSS Templates | Tutorials | SEO Articles
http://www.DreamweaverResources.com
Web Design & Development
http://www.perrelink.com.au
http://twitter.com/nadiap

How do I cut and paste text in css code in dw cc?

How do I cut and paste text in css code in dw cc? I only licensed it a few days ago, it worked fine in trial! Thanks...

copy the code in Notepad (Window Machine) or MAC (Copy in texteditor) & paste it in DW, i think its working.

How do I copy and paste text from a converted Word document?

I just converted a pdf file into word. I want to copy and paste the informatiuon into another document. How do I do that?

Hi Sara. Tanks for responding. If I cannot figure this out (I was up
until 2am last night), I want to cancel my subscription.
Here are two files you can check on/help me with. When I try again, it
comes up 'an error has occurred when trying to access the service.'
Please advise.
Pat Tomassi
In a message dated 11/1/2014 12:55:23 A.M. Eastern Daylight Time,
[email protected] writes:
How do I copy and paste text from a converted Word document?
created by Sara.Forsberg (https://forums.adobe.com/people/Sara.Forsberg)
in Adobe Acrobat.com Services - View the full discussion
(https://forums.adobe.com/message/6888908#6888908)

Preview - Cannot copy and paste text from pdf

Hi there ...
I usually have no problem copying and pasting text from a pdf using Preview ...
However .. I recently received a pdf ... and there is no way it will highlight the text to copy ...
The older pdf's are not affected ...
I did a get info on the pdf ... it's not locked ... and it was made by Adobe In Design CS2
I tried opening it with Adobe Reader 9 ...... but still no luck
IN my search .. I noticed one other person had the same problem ... but he didn't get any responses..
Thanks for any info ....

If it's behind something else then you can open it in Illustrator and select the specific object you want. If it's rasterized then no.
If this is a document you can share with the world then I'm sure we could tell you what specifically is going on if you posted it here.

I just cut and pasted photos from the phone into my HP and now I can't open the files in the computer.

I just cut and pasted photos from my Iphone into my HP.
NOw when I go and try to open the files from the computer it's giving me an error:
INVALID IMAGE
The file format is not supported or is invalid
WHat's confusing is that all files copy into my computer are already JPG. I have not changed anything, simply cut photos from my phone and copy them in my computer.
I need help !!! I have a lot of my baby photos and videos that I really want to recover.
PLEASE !
thank you

Try using a photo import utility or application for this instead of doing it the archaic manual way. Even Windoze includes a scanner and camera wizard that can be used for this.

Cut and Paste Text From My Browser

Similar Messages

Maybe you are looking for