Cut and Paste will not work

I have a Toshiba Satellite/Satellite Pro C50-A series laptop I bought new in December 2013. It has Windows 8 on it. I did the upgrade to windows 8.1 almost immediatley so I cannot remember if my control c / control v, cut and paste worked in 8 or not. But it will NOT work in 8.1 for most of my programs. I desperately need it to work on my All My Movies database software from Bolide software and my Green Eclipse sticky notes. And cut and paste will NOT work AT ALL for those programs. It works sometimes for my email and my Apache Open Office word processor.
I have contaced microsoft who's tech did something Tuesday morning to get it working. But then I booted down my computer and went to bed and when I booted it up, yep, no more cut and paste ability again! So I tried contacting microsoft this morning around 2:30am and they said it was an OEM problem and to contact Toshiba.
I have even run a sfc /scannow twice and get the same error message:
sfc /scannow      ran 1/22  1:30am
results: windows resource protection found corrupt files but was unable to fix some of them. details are included in the CBS.Log windir\Logs\CBS\CBS.log
for ex c:\windows\Logs\CBS/CBS.log
note that logging is currently not supported in offline servicing scenarios
The above error message I WAS ABLE to cut and paste FROM my green eclipse sticky note to this forum! But when I tried to cut and paste this message back to a NEW sticky note......NOTHING!
I hope someone here can provide a permanent solution to fix this! It may seem minor but I do a LOT of cut/pasting!
frustrated!!!!
lisa

There are dozens of possibilities, Lisa.
Which C50-A do you have? There is a label on the bottom.
What security applications do you have installed? Webroot is a common offender.
Do you have Microsoft Office installed? If so, which version?
Do you use Bluetooth?
Did you upgrade to Windows 8.1 properly, following carefully the instructions here?
   How to Update from Windows 8 to Windows 8.1
Find a situation that always gives you trouble, so that know when we learn something.
Then see if that trouble occurs after a clean boot.
   1. Open the System Configuration utility (msconfig.exe). You can do that by typing msconfig at the Start screen and pressing Enter.
   2. On the Services tab, set the Hide all Microsoft services check box and then click Disable all.
   3. On the Startup tab, click Open Task Manager, right-click and disable each Startup item. Then close Task Manager.
   4. Back on the System Configuration screen, click OK, and restart the computer.
-Jerry

Similar Messages

  • In SharePoint Document Library Cut and Paste option not working correctly.

    Hi,
    I have a SharePoint Document Library which has the following.
    Folder1 which contains two files named as a File1 and File2
    Folder1 ------------> File1 & File2
    Folder2 has no files.
    Now i am cut the file "File2" from Folder1 and paste in to Folder2.
    Issue is "File2" not permanently remove from "Folder1". It is retaining in "Folder1" It self.
    Can anyone tell me. What is the issue in it?
    Regards
    Poomani Sankaran

    Hi Poomani,
    According to your description, “File 2” still exists in Folder1 after it is been cut and paste to Folder2.
    Can you provide more details about how you perform the operations?
    I tried to move the file between folders in a library in the two ways below, both work without issue:
    1. “Open with Explorer”: cut and paste the file in the Windows Explorer interface;
    https://support.microsoft.com/kb/2629108?wa=wsignin1.0
    2. In the “Site Content and Structure”, use the “Move…” feature of a library;
    https://support.office.com/en-za/article/Work-with-site-content-and-structure-30fcaad9-02b1-4347-8b03-e1ccc5a4c19f
    Feel free to reply if there any progress.
    Best regards,
    Patrick
    Patrick Liang
    TechNet Community Support

  • SQL DEVELOPER cut and paste does not work, slow and cannot work fast.

    I have lots of difficulties using SQL Developer, the cut/paste does not work properly, when I type search in he code editor it just paste or type the test in the source code not in the serach box. Very hectic I'm pallning to swicth to TOAD until they a a good version.

    Hello Aukhez,
    I'm sorry to hear that you're having problems with SQLDeveloper - personally, I've never had any problems with cut/copy/paste and searching, and I've been using SQLDeveloper from v1.0 to the current version, on practically every version of the JDK from 1.5-1.6u16 on both Windows and Linux.
    Sorry to state the obvious, but perhaps if you could provide a bit more specific information - such as platform, version, etc - and details of what you tried to do, someone here might be able to help...? Regarding speed, there are quite a few things you can do to make this better, but again, without knowing your setup, it's hard to give you proper directions. Plus, you'll find numerous threads here and on google about what you can do to improve speed.
    Regards,
    John

  • Cut and Paste doesn't work in lots of apps

    I was surprised that cut and paste does not work in Twitter, in App descriptions and other places. It's nice that it works on web sites and email text, notes, etc. But, am I wrong about this?

    herbmann wrote:
    I don't understand your reply. I am able to copy and paste from web sites without any problems.
    That's because cut and paste to a web page isn't the same copy and paste from it. Your first post (and the title of this thread) referred to +cutting and pasting to+ a twitter web page.
    You can copy text from anywhere, but you can +cut and paste+ only to editable fields.
    Message was edited by: modular747

  • I have a CC Photography License and tried loading the new Lightroom cc but it will not open (only flashes the welcome screen for a split second) then goes blank.  I tried uninstalling it, rebooting, etc. several times and it will not work on my Mac with Y

    I have a CC Photography License and tried loading the new Lightroom cc but it will not open (only flashes the welcome screen for a split second) then goes blank.  I tried uninstalling it, rebooting, etc. several times and it will not work on my Mac with Yosemite.  Please help!

    Check out this thread: Downloaded Lightroom CC but only get a quick flash of the startup screen then nothing, Lightroom 5 still working.

  • Facebook and Hotmail will not work on my Macbook pro

    Facebook and Hotmail will not work on my Macbook pro. I have tried safari and firefox. I have unloaded and reloaded an old version of firefox and still no luck. When go to ebay it opens but looks very weird. I am using Mac OS X Version 10.6.6 with a 2.4 GHz Intel Core 2 Duo. I am so frustrated, I have tried everything I can think of and still no luck.

    Good of you to offer the detail you did (a lot of people don't bother) but it still is not quite enough. Texting that it "looks very weird" just leaves me blank. Most basic remedy for browser issues is to use Safari to google "adobe flash" and download a fresh file & install. Can't think of anything else given what you've posted....

  • TS1362 I have a Mac Pro tower, am running osx and iTunes will not work.. It basically just stopped working after having run faultlessly for...years... I can see all the songs, playlists etc, but the progress bar will not progress..it's 'stuck'. Suggestion

    I have a Mac Pro tower am running OSX and iTunes will not work. It has always worked flawlessly. I can see all my iTunes content- my playlists, my songs et cetera, But I cannot play anything. The progress bar is  'stuck'...any suggestions?

    Thanks. I have been using iTunes since its inception and have never had a problem...I'm using the latest version. The progress bar is the bar that moves when you're playing a song..it just won't start when I double click on a song,..have tried quitting, rebooting etc but nothing works. Apple are useless-they have told me twice they've tried to call me 'momentarily', but I've been waiting by the phone, and they definitely have not tried to call...

  • HT4972 2nd generation ipod touch is pretty much no good anymore?  It is not able to upgrade to iOS5.1 and so will not work with many of the Apps now available in the App store.  Is there any way to find out which apps will work with 2nd generat

    2nd generation ipod touch is pretty much no good anymore?  It is not able to upgrade to iOS5.1 and so will not work with many Apps in the iTunes store?  Is there a way to find out if the App will work before you download?

    Look to the app developer to provide that information when browsing the iTunes Store.
    The iPod Touch still works, so what's your problem with it? It still works with older apps, it still does what it's intended to do.
    If you aren't happy then sell it and buy a new one.

  • I just downloaded a few ITunes Apps to my PC using windows 8 and they will not work.  Suggestions?  Thank you.

    I just downloaded a few ITunes Apps to my PC using windows 8 and they will not work.  Suggestions?  Thank you.

    The apps can only be run on an iOS device.   They will not run on your PC.

  • I downloaded firefox 4 and it will not work on my Mac OSX4.11

    I downloaded firefox 4 and it will not work on my Mac OSX4.11.

    Very weird day in Firefoxland
    First on a Powerbook G4 running 10.4.11 I respond to an invitation to upgrade to Firefox 4 (like a lot of others). Long story short, I wind up losing the browser altogether -- including all bookmarks. Why? Because neither the Firefox homepage (or CNET downloads) makes it clear that 4.0 is for OS 10.5 only! Amazing!
    Then I try to register to post a reply in a thread that crits Firefox for not making this System Requirements info upfront clear. But the Register page I’m taken to (https://support.mozilla.com/bs/users/register) is in SERBO-CROATIAN!!
    Then I try to log into Chat a couple of times and when it’s not CLOSED its a long line waiting and THEN it closes.
    WOW!! Are the wheels off the wagon here or what!?!

  • HT203585 My FaceTime and iMessage will not work on my mac. How do i fix this?

    My facetime and iMessage will not work on my mac book. I put in my appleID and it says it is incorrect, but it is correct. How do i fix this?

    FaceTime, Game Center, Messages: Troubleshooting sign in issues - Apple Support

  • I cannot seem to load raw images into LR 2.5.  I've been using this for years.  I always load from memory card, but it gives me an unknown error message.  I tried to load from camera, hard drive, & external drive and still will not work.  I checked import

    I cannot seem to load raw images into LR 2.5.  I've been using this for years.  I always load from memory card, but it gives me an unknown error message.  I tried to load from camera, hard drive, & external drive and still will not work.  I checked import menu and nothing has changed.  I loaded the photos onto my tablet and images are fine, so do not feel it is the memory card.  Any thoughts?

    The error message probably said "unsupported or damaged"
    The T3 requires Lightroom 3.4.1 or later. You can either upgrade to a more current version of Lightroom (version 5.6 is the most recent) or you can use the free Adobe DNG Converter to convert the RAWs to DNG, which should import into Lightroom properly.

  • TS1362 I downloaded two cd's last night and I am un able to play some songs cause it tells me I am this computer is unauthorized to play some songs,I did what it said about going to store to get authorized and still will not work,not happy at all!

    I downloaded two cd's last night and I am un able to play some songs cause it tells me I am this computer is unauthorized to play some songs,I did what it said about going to store to get authorized and still will not work,not happy at all!  I NEED HELP OR MY MONEY BACK NOW!

    There seems to be an occasional issue with downloads from the store. They prompt for authorization when they are in fact corrupt/incomplete in some fashion. Try deleting the problem tracks (do not hide from iTunes in the cloud), close iTunes and reopen, go to iTunes Store > Qucklinks > Purchased > Music > Not on this computer. Select a few tracks to download then click the icon that appears at the top-right of the iTunes window.. Untick the box that reads Allow simultaneous downloads. Proceed with the rest of your eligible purchases.
    If you still have a problem use the Report a problem links in your account history to contact the iTunes Store support team.
    tt2

  • PSE13 trial version and it will not work with Windows 7

    I have downloaded PSE13 trial version and it will not work with Windows 7

    I have been using PSE 13 for 3 months with no problems.   When I launch the Editor in PSE 13 this is what I get -
    "Adobe Photoshop cannot run on this computer because this version of Photoshop requires Windows 7 or later"
    RAM 12.0GB
    64 bit operating system
    Intel(R) Core(TM)I7CPU 920 @ 2.67GHz
    Windows 7 SP1
    Hope this helps.
    Lynne

  • Touchsmart 520-1047c Mouse and Keyboard will not work after sleep mode

    I have an issue which I need some help with. When my computer goes to sleep the wireless mouse and keyboard will not work unless I restart, however each one will wake the system up but will not operate after that. I have tried just making the display go to sleep, both go to sleep but that makes no difference same issue occurs. The only work around I have found is going into the power settings and turning the sleep mode off for booth the computer and display. This does not solve the problem it just masks it. New batteries, unplugged and replugged the dongle, updated the bios and all drivers. Don't know what else to try. Anybody know how to fix this? Thank you in advance for your help.

    Hello , Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the HP Forums I would like to direct your attention to the HP Forums Guide First Time Here? Learn How to Post and More. I understand that the mouse and keyboard on your desktop computer does not work if your computer enters sleep mode, and I would be happy to assist you in this matter! To correct this issue, I recommend following the steps in this document on Troubleshooting sleep and hibernate issues (Windows 7). This should help enable your system to wake from sleep mode using your wireless keyboard and mouse. I also recommend connecting wired peripherals to diagnose the functionality of your keyboard and mouse. If your system is still not able to wake from sleep mode, please follow the steps below to restore the default power schemes on your computer: Step 1. Click the Start button
    Step 2. In the search box, type "Command Prompt"
    Step 3. Right-click Command PromptStep 4. Click Run as administrator
    Step 5. At the command prompt, type powercfg /restoredefaultschemes and press Enter  reference: http://superuser.com/questions/669571/windows-8-1-64-bit-power-schemes-gone Please re-post with the results of your troubleshooting, as well as the requested information above. I look forward to your reply!
    Regards  

Maybe you are looking for