Cut-off text. Please help me. Thank you.

Hello,
I published my site several weeks ago with no problems at all. Now, suddenly, text (rendered as images) throughout the site is being cut-off, sometimes to the point of invisibility.
my site can be found at: http://www.milescollyer.com/
(I can provide screen shots of how it appears in iWeb versus Safari if needed)
I have tried almost everything that I can think of including:
-increasing the size of text boxes to a generous size
-increasing/decreasing the size of the font
-moving the text boxes up and down slightly in an attempt to fully reveal the text
-deleting and remaking text boxes
I have been reviewing this forum for days looking for help with this problem. I am at a loss of what more I can do. PLEASE help.
Thank you,
-miles

I noticed there are also diamond symbols with ? in them which are showing up too. Are you creating your text links within iweb and then using the inspector to link them to other pages? I have seen this type of problem when putting in forms, but never with text links. One way around this might be to link the text box instead of the text to other pages. for example, when you highlight the text and go to the inspector then enable as a link simply do the same but dont highlight the text just select the text box. Try it on a few and republish, its worth a try. You also might want to try this first, do a publish all rather than just publish. To do this go to file and select publish all to .mac. Sometimes this is an easy fix to weird problems. Your site looks nice and I hope you can get it up and running. Good luck.

Similar Messages

TS3992 My iPad says it needs an iCloud backup but won't allow me do anything when I click ok.. I can't even turn it off. Can you please help? Thank you!!!

My iPod says that it needs an iCloud backup and it hasn't been done in 3 weeks. However, it will not allow me to do anything.. It won't even let me turn it off. Please help! Thank you!!!

- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Then go to Settings>iClould Storage and Backup and manually make an iCloud backup

Why are songs/albums deleted off of the iTunes store? How can I get them back on the iTunes store? PLEASE help. Thank you.

Why are songs/albums deleted off of the iTunes store? How can I get them back on the iTunes store? PLEASE help. Thank you.

Perhaps the copyright holders chose to remove them. What album were you after?
tt2

TS2755 I recently upgraded my IPhone and for 1 person I began receiving this "7233375 Error Invalid Number. Please re-send using a valid 10 digit mobile number or valid short code". I receive text from this person but cannot send. Please help. Thank you.

I recently upgraded my IPhone and for 1 person I began receiving this "7233375 Error Invalid Number. Please re-send using a valid 10 digit mobile number or valid short code". I receive text from this person but cannot send. Please help. Thank you.

Hi there
I’d be happy to help with this messaging error! This will be due to the device storing the number incorrectly. Please do the following to resolve the issue:
Delete texts from both old number and new
Delete any call logs including these numbers
Delete old number from contacts
Delete new number from contacts
Restart device
Send text to the new number directly (do not save as contact)
Once the text sends successfully, you can then save as a new contact
I hope this helps!
Charise

I have an iPhone 4s just eight months, it is normal that the battery lasts only 3 hours? please help me thank you very much.

I have an iPhone 4s just eight months, it is normal that the battery lasts only 3 hours? please help me thank you very much.

Three hours if definitely NOT normal. I get at least 48 hours out my 2 year old iPhone 4S' battery with light usage. Did you do the iOS 7 update on the phone it self (OTA) or through iTunes? In my experience most problems are caused by the OTA updates. For this reason I ALWAYS update using iTunes on my computer.
I would suggest restoring your phone using iTunes on your computer and setting it us as a new phone. This downloads a fresh copy of iOS 7.1 from Apple and installs it on your phone. Just make sure that you transfer all purchased items (apps, music, etc.) as well as photos to your computer before restoring as the restore will completely wipe your phone. Do not restore from a back-up. Yes, you will loose all your data on the phone but restoring a back-up can restore the problem you are currently having back to your phone. Once your phone has been restored you can manually sync back your apps and music.
Before restoring you can also check to see that battery-killers like Location Services, Background App Refresh, etc are only turned on for the apps that really need it. I recently read and article that said that the Facebook app can be a real battery killer. If you have this app installed turn of location services and background app refresh for this app and see if that helps. Also go to Settings / General / Restrictions / Location Services / System Services and turn off all the options in that menu. Your phone does not need any of those to function. Constantly using your phone's GPS is a huge battery killer. I only have Location Services enabled for Find my iPhone and Background App Refresh is turned off completely.
I hope this helps.

HT1212 my ipad is disabled permantly and i dont want to loose my pictures i keep going through the 5 steps and each time it says "itunes cannot connect to ipad because it is locked with a passcode" WHAT DO I DO PLEASE HELP ME. thank you. sorry about spell

my ipad is disabled permantly and i dont want to loose my pictures i keep going through the 5 steps and each time it says "itunes cannot connect to ipad because it is locked with a passcode" WHAT DO I DO PLEASE HELP ME. thank you. sorry about spelling.

FORCE IPAD INTO RECOVERY MODE
1. Turn off iPad
2. Turn on computer and launch iTunes (make sure you have the latest version of iTune)
3. Plug USB cable into computer's USB port
4. Hold Home button down and plug the other end of cable into docking port.
DO NOT RELEASE BUTTON until you see picture of iTunes and plug
5. Release Home button.
ON COMPUTER
6. iTunes has detected iPad in recovery mode. You must restore this iPad before it can be used with iTunes.
7. Select "Restore iPad"...
Note:
1. Data will be lost if you do not have backup
2. If you did not do step 4 properly, start all over again.

My ipod touch gets stuck on the same song, even after I uncheck the loop button. I am trying to play it in my 2007 vw with a power adapter that allows it to charge and play through my navigation unit. Please help. Thank you.

My ipod touch gets stuck on the same song, even after I uncheck the loop button. I am trying to play it in my 2007 vw with a power adapter that allows it to charge and play through my navigation unit. Please help. Thank you.

Yes, first try deleing both songs.
If still problem
Try:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Unsync all music and resync
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.
If still problem, ,make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
Apple Retail Store - Genius Bar

I have frequent instances of my Macbook Pro beeping 3 times and then I have to forcefully shut it down by pressing the power button. What is this all about? Please help. Thank you.

I have frequent instances of my Macbook Pro beeping 3 times and then I have to forcefully shut it down by pressing the power button. What is this all about? Please help. Thank you.
I saw this report being sent to Apple:
Interval Since Last Panic Report: 581719 sec
Panics Since Last Report: 10
Anonymous UUID: F4CF708D-D85C-4EC5-8047-4FC22C6B03AF
Fri Mar 7 13:00:14 2014
panic(cpu 0 caller 0xffffff80002d1208): Kernel trap at 0xffffff800020c590, type 14=page fault, registers:
CR0: 0x0000000080010033, CR2: 0x0000000000000000, CR3: 0x0000000007541000, CR4: 0x0000000000040660
RAX: 0xffffff8000000000, RBX: 0xffffff800d35a870, RCX: 0xffffff800cf55cd8, RDX: 0xffffff80008a8fcc
RSP: 0xffffff805e5f3d60, RBP: 0xffffff805e5f3da0, RSI: 0x000000001dcd6500, RDI: 0xffffff800d168778
R8: 0x0000000000000001, R9: 0xffffff805e5f3e88, R10: 0x0000000000000011, R11: 0x0000000000000000
R12: 0x0000000000000000, R13: 0xffffff800d168770, R14: 0xffffff800d168778, R15: 0x0000000000000000
RFL: 0x0000000000010082, RIP: 0xffffff800020c590, CS: 0x0000000000000008, SS: 0x0000000000000010
Error code: 0x0000000000000000
Backtrace (CPU 0), Frame : Return Address
0xffffff805e5f3a00 : 0xffffff8000204d15
0xffffff805e5f3b00 : 0xffffff80002d1208
0xffffff805e5f3c50 :
Model: MacBookPro8,1, BootROM MBP81.0047.B27, 2 processors, Intel Core i5, 2.3 GHz, 4 GB, SMC 1.68f99
Graphics: Intel HD Graphics 3000, Intel HD Graphics 3000, Built-In, 384 MB
Memory Module: global_name
AirPort: spairport_wireless_card_type_airport_extreme (0x14E4, 0xD6), Broadcom BCM43xx 1.0 5.100.198.104.5)
Bluetooth: Version 2.4.5f3, 2 service, 12 devices, 1 incoming serial ports
Serial ATA Device: Hitachi HTS545032B9A302, 298.09 GB
Serial ATA Device: OPTIARC DVD RW AD-5970H
USB Device: FaceTime HD Camera (Built-in), 0x05ac (Apple Inc.), 0x8509, 0xfa200000 / 3
USB Device: Hub, 0x0424 (SMSC), 0x2513, 0xfa100000 / 2
USB Device: BRCM2070 Hub, 0x0a5c (Broadcom Corp.), 0x4500, 0xfa110000 / 5
USB Device: Bluetooth USB Host Controller, 0x05ac (Apple Inc.), 0x821a, 0xfa113000 / 8
USB Device: Apple Internal Keyboard / Trackpad, 0x05ac (Apple Inc.), 0x0245, 0xfa120000 / 4
USB Device: Hub, 0x0424 (SMSC), 0x2513, 0xfd100000 / 2
USB Device: IR Receiver, 0x05ac (Apple Inc.), 0x8242, 0xfd110000 / 3

Hmm. The problem still may be the RAM - Apple buys the RAM it puts in its machines from third-party vendors (usually Hynix) so it could be a RAM problem.
There are a couple of things that you can do yourself before taking your machine into an Apple Store or an AASP... download and run an application named Rember that will run a RAM test for you - let it run for a couple of hours or even overnight. If it turns out that your RAM is faulty, Rember will let you know. If it is faulty, then you have a couple of options - replace the RAM yourself or (particularly if you're under warranty still) take the machine to an Apple Store or AASP and have them replace the RAM.
If Rember finds no fault with the RAM, then you'll need to take it into an Apple Store/AASP and get a free diagnosis on the machine. Three beeps do usually indicate faulty RAM, but if it tests good with Rember you likely have another problem - it could be something as simple as the RAM, somehow, not seated correctly or signs of another hardware problem.
Run Rember first... call back with results.
Good luck,
Clinton

HT204053 I have two Apple ID's. How do I delete one of them? Please help. Thank you. Dru

I have two Apple ID's. How do I delete one of them? Please help. Thank you. Dru

To add to the above...
From Here http://support.apple.com/kb/HE37
I have multiple Apple IDs. Is there a way for me to merge them into a single Apple ID?
Apple IDs cannot be merged. You should use your preferred Apple ID from now on, but you can still access your purchased items such as music, movies, or software using your other Apple IDs.

Hello Guys. I had problems in the Computer before and changed my HD. I saved in my all files documents in (Time Capsule). How can I put all my files, pictures documents on my new HD? Please Help. Thank You

Hello Guys.
I had problems in the Computer before and changed my HD. I saved in my all files documents in (Time Capsule). How can I put all my files, pictures documents on my new HD?
Please Help.
Thank You
Julio Skov

Hey
Thank you very much for replay.
Would you explain to me how can I do?
I don't really understand these processes.
Thak you very much
Julio

I down loaded about 100 cds to my library and I can no longer view the downloaded artwork it's shows a black picture or blank. How can I get the artwork back? Please help! Thank you

I downloaded about 100 cds to my library and I can no longer view the downloaded artwork it's shows a black picture or blank. How can I get the artwork back? Please help! Thank you.

Hi- apparently I also had a similar moment of madness and thought that 'freeride games' would be fun. Well, so much for that! It added a ton of things to my tool bar, I would like to uninstall it, any suggestions for this one?
thanks :)

I am having trouble dating to version 3.6.14. I am running Linux/Ubutu OS and I get this error message:/tmp/p7x3vko2.part could not be saved, because the source file could not be read. Please help. Thank you , Deb

I am having trouble dating to version 3.6.14 or updating to the Beta testing. I am running Linux/Ubutu OS and I get this error message:/tmp/p7x3vko2.part could not be saved, because the source file could not be read. Please help. Thank you , Deb

Solved for me.
I set the owner/permissions of my profile's mozilla folder's (and all the files in it) to read/write access, and the problem disappeared.
in linux:''
* cd /home/myusername/.mozilla
* chown -cR myusername:mygroup ./
* chmod -cR +rw ./
'''Never do that with root privs (nor with sudo)'''

TS3694 Hi, i'm trying to update my iphone but this is the msg i'm getting, can you please help me. thank you. "the iphone ''C & M '' could not be restored. An unknown error occurred (3194)"

Hi, i'm trying to update my iphone but this is the msg i'm getting, can you please help me. thank you. "the iphone ''C & M '' could not be restored. An unknown error occurred (3194)"

http://support.apple.com/kb/TS3694#error3194
This means that either your firewall/antivirus is blocking access to Apple's servers, or you have used your computer to jailbreak an iDevice in the past. The link above tells you how to resolve this issue.

Trying to migrate from Windows 7 Ultimate to Windows 7 Professional (x64). Have issues. Please help. Thank you.

I have a 128 GB SSD drive and I bought a 512 GB SSD recently. I used the disk copy utility to copy all the information from the 128 GB drive to the 512 GB drive. However, Windows 7 Ultimate N x64 is asking me to enter my key for validation. Unfortunately,
I cannot find the key used to install Windows 7 Ultimate N. When I used another valid key for Windows 7 Ultimate N, it would not accept the key because it is looking for the original key. Since I didn't want to do a clean install, I was
willing to 'upgrade' to Windows 7 Professional x64. I went into the registry and changed the Product Name to Windows 7 PROFESSIONAL and I changed the EditionID to Professinal. When I was trying to install Windows 7 Professional, I received the following message:
The following issues are preventing Windows from upgrading. Cancel the upgrade, complete each task, and then restart the upgrade to continue.
Your current version of Windows is more recent than the version you are trying to upgrade to. Windows cannot complete the upgrade.
There is not enough free space on partition (K:). A total of 15 megabytes (MB) of free disk space is required. Try Disk Cleanup, or moving files to an external location such as a CD, DVD, or external hard drive, and then restart the installation.
When I tried to rename one of my drive to K using disk management, it says the drive letter K is already mapped to a network share or a local path. In order to see the volume after the operation, you must remove current mapping.
What am I doing wrong? Please help. Thank you so much.

You can't just change the product name and have it work. At this point your best bet is to
go to this thread and follow the directions and post your results in a new thread in
the Windows Genuine Forums. That way, they can determine exactly which type of install you have and what your options are.
Please do not read this sentence. Please ignore the previous sentence.

Until recently I was able to send images in the body of my Yahoo emails. Now, I am getting the message "This message has been truncated", and the email does not go through. I do not have this problem using IE. Could you please help? Thank you.

Until recently I was able to send images in the body of my Yahoo emails. Now, I am getting the message "This message has been truncated", and the email does not go through. I do not have this problem using IE. Could you please help? Thank you.

Try this -> http://support.apple.com/kb/TA38632?viewlocale=en_US

While editing photos in Aperture, I'm trying to make an "auto" adjustment to the exposure but the button is grayed out and consequently doesn't perform any function, please help! Thank you, Mike

While editing photos in Aperture, I trying to make an "auto" adjustment to the exposure,
but the "auto" button is grayed out and will not allow any auto function to take place.
Please help!
Thank you,
Mike

Mike, are you working with raw images?
For some raw images auto exposure is not available, have a look at this manual page:
http://documentation.apple.com/en/aperture/usermanual/index.html#chapter=18%26se ction=9%26tasks=true
Note: Automatic exposure adjustment is available for Aperture-supported RAW images only. If you want to adjust the exposure of another file type, such as JPEG or TIFF, see Working with the Exposure Controls. For a list of supported RAW file types, go to the Apple website at http://www.apple.com/aperture/specs.

Cut-off text. Please help me. Thank you.

Similar Messages

Maybe you are looking for